/* doc/example.conf - NeoIRCd Example configuration file
 * Copyright (C) 2002 NeoStats
 *
 * ported from Hybrid7 by fish
 *
 * $Id: example.conf,v 1.7 2002/10/31 13:01:54 fishwaldo Exp $
 */

/* IMPORTANT NOTES:
 *
 * class {} blocks MUST be specified before anything that uses them.  That
 * means they must be defined before auth {} and before connect {}.
 *
 * auth {} blocks MUST be specified in order of precedence.  The first one
 * that matches a user will be used.  So place spoofs first, then specials,
 * then general access, then restricted.
 *
 * Both shell style (#) and C style comments are supported.
 *
 * Files may be included by either:
 *        .include "filename"
 *        .include <filename>
 *
 * Times/durations are written as:
 *        12 hours 30 minutes 1 second
 *        
 * Valid units of time:
 *        month, week, day, hour, minute, second
 *
 * Valid units of size:
 *        megabyte/mbyte/mb, kilobyte/kbyte/kb, byte
 *
 * Sizes and times may be singular or plural.  
 */ 

 /* serverinfo {}:  Contains information about the server. (OLD M:) */
serverinfo {
	/* name: the name of our server */
	name = "irc.dynam.ac";

	/* description: the description of our server.  '[' and ']' may not
	 * be used here for compatibility with older servers.
	 */
	description = "NeoIRCd test server";

	/* network info: the name and description of the network this server
	 * is on.  Shown in the 005 reply and used with serverhiding.
	 */
	network_name = "MyNet";
	network_desc = "This is My Network";

	/* hub: allow this server to act as a hub and have multiple servers
	 * connected to it.  This may not be changed if there are active
	 * LazyLink servers.
	 */
	hub = yes;

	/* vhost: the IP to bind to when we connect outward to ipv4 servers.
	 * This should be an ipv4 IP only.
	 */
	#vhost = "192.169.0.1";

	/* vhost6: the IP to bind to when we connect outward to ipv6 servers.
	 * This should be an ipv6 IP only.
	 */
	#vhost6 = "3ffe:80e8:546::2";

	/* max clients: the maximum number of clients allowed to connect */
	max_clients = 512;

	/* rsa key: the path to the file containing our rsa key for cryptlink.
	 *
	 * Example command to store a 2048 bit RSA keypair in
	 * rsa.key, and the public key in rsa.pub:
	 * 
	 * 	openssl genrsa -out rsa.key 2048
	 *	openssl rsa -in rsa.key -pubout -out rsa.pub
	 *	chown <ircd-user>.<ircd.group> rsa.key rsa.pub
	 *	chmod 0600 rsa.key
	 *	chmod 0644 rsa.pub
	 */
	#rsa_private_key_file = "/usr/local/ircd/etc/rsa.key";
};

/* admin {}: contains admin information about the server. (OLD A:) */
admin {
	name = "Smurf target";
	description = "Main Server Administrator";
	email = "<syn@packets.r.us>";
};

/* logging {}: contains information about logfiles. */
logging {
	/* log level: the amount of detail to log in ircd.log.  The
	 * higher, the more information is logged.  May be changed
	 * once the server is running via /quote SET LOG.  Either:
	 * L_CRIT, L_ERROR, L_WARN, L_NOTICE, L_TRACE, L_INFO or L_DEBUG
	 */
	log_level = L_INFO;
};

/* class {}: contain information about classes for users (OLD Y:) */
class {
	/* name: the name of the class.  classes are text now */
	name = "users";

	/* ping time: how often a client must reply to a PING from the
	 * server before they are dropped.
	 */
	ping_time = 2 minutes;

	/* number per ip: the number of users per host allowed to connect */
	number_per_ip = 2;

	/* max number: the maximum number of users allowed in this class */
	max_number = 100;

	/* sendq: the amount of data allowed in a clients queue before
	 * they are dropped.
	 */
	sendq = 100 kbytes;
};

class {
	name = "restricted";
	ping_time = 1 minute 30 seconds;
	number_per_ip = 1;
	max_number = 100;
	sendq = 60kb;
};

class {
	name = "opers";
	ping_time = 5 minutes;
	number_per_ip = 10;
	max_number = 100;
	sendq = 100kbytes;
	auto_join="#ircop";
};

class {
	name = "server";
	ping_time = 5 minutes;

	/* connectfreq: only used in server classes.  specifies the delay
	 * between autoconnecting to servers.
	 */
	connectfreq = 5 minutes;

	/* max number: the amount of servers to autoconnect to */
	max_number = 0;

	/* sendq: servers need a higher sendq as they send more data */
	sendq=2 megabytes;
};

/* listen {}: contain information about the ports ircd listens on (OLD P:) */
listen {
	/* port: the specific port to listen on.  if no host is specified
	 * before, it will listen on all available IPs.
	 *
	 * ports are seperated via a comma, a range may be specified using ".."
	 */
	
	/* port: listen on all available IPs, ports 6665 to 6669 */
	port = 6667;

	/* host: set a specific IP/host the ports after the line will listen 
	 * on.  This may be ipv4 or ipv6.
	 */
	#host = "10.1.1.2"
};

/* auth {}: allow users to connect to the ircd (OLD I:) */
auth {
	/* this block is ideal for opers, as it exempts them from Klines etc */

	/* user: the user@host allowed to connect.  multiple IPv4/IPv6 user 
	 * lines are permitted per auth block.
	 */
	user = "*@neostats.net";

	/* password: an optional password that is required to use this block */
	#password = "letmein";
	
	/* exceed limit: allow a user to exceed class limits (OLD I: > flag) */
	exceed_limit = yes;

	/* kline exempt: exempt this user from k/glines (OLD I: ^ flag) */
	kline_exempt = yes;

	/* gline exempt: exempt this user from glines (OLD I: _ flag) */
	gline_exempt = yes;

	/* no tilde: remove ~ from a user with no ident (OLD I: - flag) */
	no_tilde = yes;
	
	/* class: the class the user is placed in */
	class = "opers";
};

auth {
	/* redirect: the server and port to redirect a user to.  A user does
	 * not have to obey the redirection, the ircd just suggests to them
	 * an alternative server.
	 */
	redirserv = "irc.fi";
	redirport = 6667;
	
	user = "*.fi";

	/* class: a class is required even though it is not used */
	class = "users";
};

auth {
	user = "*@*";
	class = "users";
	
	/* restricted: stop the client sending mode changes */
	#restricted = yes;

	/* have ident: require the user has identd to connect (OLD I: + flag) */
	have_ident = yes;
};

/* operator {}: defines ircd operators. (OLD O:)
 */
operator {
	/* name: the name of the oper */
	name = "ircop";

	/* user: the user@host required for this operator.  CIDR is not
	 * supported.  multiple user="" lines are supported.
	 */
	user = "*@*";
	#user = "*@127.0.0.1";

	/* password: the password required to oper.  By default this will
	 * need to be encrypted using 'mkpasswd'.  MD5 is supported.
	 */
	password = "g4uSVO1Mi9jy2";

	/* rsa key: the public key for this oper when using Challenge.
	 * A password should not be defined when this is used, see 
	 * doc/challenge.txt for more information.
	 */
	#rsa_public_key_file = "/usr/local/ircd/etc/oper.pub";

	/* class: the class the oper joins when they successfully /oper */
	class = "opers";

	/* privileges: controls the activities and commands an oper are 
	 * allowed to do on the server.  All options default to no.
	 * Available options:
	 *
	 * global_kill:  allows remote users to be /KILL'd (OLD 'O' flag)
	 * remote:       allows remote SQUIT and CONNECT   (OLD 'R' flag)
	 * kline:        allows KILL, KLINE and DLINE      (OLD 'K' flag)
	 * unkline:      allows UNKLINE and UNDLINE        (OLD 'U' flag)
	 * gline:        allows GLINE                      (OLD 'G' flag)
	 * nick_changes: allows oper to see nickchanges    (OLD 'N' flag)
	 *               via usermode +n
	 * rehash:       allows oper to REHASH config      (OLD 'H' flag)
	 * die:          allows DIE and RESTART            (OLD 'D' flag)
	 * admin:        gives admin privileges.  admins
	 *               may (un)load modules and see the
	 *               real IPs of servers.
	 */
	global_kill = yes;
	remote = yes;
	kline = yes;
	unkline = yes;
	gline = yes;
	die = yes;
	rehash = yes;
	nick_changes = yes;
	admin = yes;
};

/* connect {}: controls servers we connect to (OLD C:, N:, H:, L:) */
connect {
	/* name: the name of the server */
	name = "stats.dynam.ac";

	/* host: the host or IP to connect to.  If a hostname is used it
	 * must match the reverse dns of the server.
	 */
	host = "*";

	/* passwords: the passwords we send (OLD C:) and accept (OLD N:).
	 * The remote server will have these passwords reversed.
	 */
	send_password = "linkpass";
	accept_password = "linkpass";

	/* encrypted: controls whether the accept_password above has been
	 * encrypted.  (OLD CRYPT_LINK_PASSWORD now optional per connect)
	 */
	encrypted = no;

	/* set_ulined: Controls weather this server should be u-lined
         * on the entire network. This means that you no longer have
         * to set a individual U line (or Shared entry in Hybrid) on every 
         * server for your services. The U line setting will be dynamically 
         * set on all other servers when it links.
	 */
	set_ulined = yes;

	/* port: the port to connect to this server on */
	port = 6666;

	/* hub mask: the mask of servers that this server may hub. Multiple
	 * entries are permitted
	 */
	hub_mask = "*";

	/* leaf mask: the mask of servers this server may not hub.  Multiple
	 * entries are permitted.  Useful for forbidding EU -> US -> EU routes.
	 */
	#leaf_mask = "*.uk";

	/* class: the class this server is in */
	class = "server";

	/* autoconnect: controls whether we autoconnect to this server or not,
	 * dependent on class limits.
	 */
	autoconn = no;
	
	/* compressed: controls whether traffic is compressed via ziplinks.
	 * By default this is disabled
	 */

	/* Compression *MIGHT* be un-reliable right at the moment. AND
	 * if you have a shell that restricts the number of background processes that
	 * you run, this could cause trouble, as Encrypted and/or Compressed IRCd
	 * server connections will fork a program called servlink to handle the
	 * compression and encryption of the traffic. This means that if you are a
	 * hub, and have 4 servers link to you, you will have 5 processes
	 * running, the ircd, and 4 servlink processes. This will change in
	 * future version. 
	 */


	#compressed = yes;

	/* lazylink: controls whether this server is a LazyLink.  LazyLink 
	 * servers may NOT hub.  see doc/LazyLinks.as.implemented.txt
	 */
	#lazylink = yes;

	/* masking: the servername we pretend to be when we connect */
	/* this doesn't work just yet */
	#fakename = "*.arpa";
};


/* kill {}: users that are not allowed to connect (OLD K:)
 * Oper issued klines will be added to the specified kline config
 */
kill {
	user = "bad@*.hacked.edu";
	reason = "Obviously hacked account";
};

/* deny {}: IPs that are not allowed to connect (before DNS/ident lookup)
 * Oper issued dlines will be added to the specified dline config
 */
deny {
	ip = "10.0.1.0/24";
	reason = "Reconnecting vhosted bots";
};

/* exempt {}: IPs that are exempt from deny {} and Dlines. (OLD d:) */
exempt {
	ip = "192.168.0.0/16";
};

/* resv {}: nicks and channels users may not use/join (OLD Q:) */
resv {
        /* reason: the reason for the proceeding resv's */
        reason = "There are no services on this network";

	/* resv: the nicks and channels users may not join/use */
	nick = "nickserv";
	nick = "chanserv";
	#channel = "#services";

	/* resv: wildcard masks are also supported in nicks only */
	reason = "Clone bots";
	nick = "clone*";
};

/* gecos {}:  The X: replacement, used for banning users based on their
 * "realname".  The action may be either:
 *      warn:   allow client to connect, but send message to opers
 *      reject: drop clients but also send message to opers.
 *      silent: silently drop clients who match.
 */
gecos {
	name = "*sex*";
	reason = "Possible spambot";
	action = warn;
};

gecos {
	name = "sub7server";
	reason = "Trojan drone";
	action = reject;
};

gecos {
	name = "*http*";
	reason = "Spambot";
	action = silent;
};

/* The channel block contains options pertaining to channels */
channel {
	/* knock delay: The amount of time a user must wait between issuing
	 * the knock command.
	 */
	knock_delay = 5 minutes;

	/* knock channel delay: How often a knock to any specific channel
	 * is permitted, regardless of the user sending the knock.
	 */
	knock_delay_channel = 1 minute;

	/* max chans: The maximum number of channels a user can join/be on. */
	max_chans_per_user = 15;

        /* quiet on ban: stop banned people talking in channels. */
        quiet_on_ban = yes;

        /* max bans: maximum number of +b/e/I modes in a channel */
        max_bans = 25;

	/* persist time: the minimum amount of time a channel will remain with
	 * all its modes intact once the last user has left the channel.
	 *
	 * set to 0 to disable. 
	 */
	persist_time = 30 minutes;

        /* splitcode: the ircd will check every 60s as to whether splitmode
	 * should be disabled or not, so there may be a delay between a
	 * netsplit ending and splitmode ending.
	 *
	 * both split users and split servers must be true to enter splitmode
	 * 
	 * you may force splitmode to be permanent by /quote set splitmode on
	 */

	/* split users: when the usercount is lower than this level, consider
	 * ourselves split.  this must be set for automatic splitmode
	 */
	default_split_user_count = 0;

	/* split servers: when the servercount is lower than this, consider
	 * ourselves split.  this must be set for automatic splitmode
	 */
	default_split_server_count = 0;

	/* split no create: disallow users creating channels on split, works in 
	 * tandem with persistant channels, that have retained their modes.
	 */
	no_create_on_split = no;

	/* split: no join: disallow users joining channels at all on a split */
	no_join_on_split = no;
};


/* The serverhide block contains the options regarding serverhiding */
serverhide {
	/* flatten links: this option will show all servers in /links appear
	 * that they are linked to this current server
	 */
	flatten_links = no;
	/* links delay: how often to update the links file when it is
	 * flattened.
	 */
	links_delay = 5 minutes;

	/* hidden: hide this server from a /links output on servers that
	 * support it.  this allows hub servers to be hidden etc.
	 */
        hidden = no;

	/* disable hidden: prevent servers hiding themselves from a
	 * /links ouput.
	 */
	disable_hidden = no;

	/* hide servers: hide remote servernames everywhere and instead use
	 * network_name and network_desc.
	 */
	hide_servers = no;

	/* disable remote: disable users doing commands on remote servers */
	disable_remote_commands = no;

	/* disable local channels: prevent users from joining &channels.
	 * This is extreme, but it is still a flaw in serverhide.  It will
	 * however remove far more from users than it will give back in
	 * security.
	 */
	disable_local_channels = no;
};

/* The general block contains many of the options that were once compiled
 * in options in config.h.  The general block is read at start time.
 */
general {
	/* floodcount: the default value of floodcount that is configurable
	 * via /quote set floodcount.  This is the amount of lines a user
	 * may send to any other user/channel in one second.
	 */
        default_floodcount = 10;

	/* autojoin: when anyone opers up, they will automatically be
	 * joined to this channel. 
	 * if the channel doesn't exist, it will be set +ntO
	 */
	autojoin = "#ircops";


	/* failed oper notice: send a notice to all opers on the server when 
	 * someone tries to OPER and uses the wrong password, host or ident.
	 */
	failed_oper_notice = yes;

	/* dots in ident: the amount of '.' characters permitted in an ident
	 * reply before the user is rejected.
	 */
	dots_in_ident=2;

	/* dot in ipv6: ircd-hybrid-6.0 and earlier will disallow hosts 
	 * without a '.' in them.  this will add one to the end.  only needed
	 * for older servers.
	 */
        dot_in_ip6_addr = yes;
        
        /* min nonwildcard: the minimum non wildcard characters in k/d/g lines
	 * placed via the server.  klines hand placed are exempt from limits.
	 * wildcard chars: '.' '*' '?' '@'
	 */
	min_nonwildcard = 4;

        /* max accept: maximum allowed /accept's for +g usermode */
        max_accept = 20;

	/* nick flood: enable the nickflood control code */
	anti_nick_flood = yes;

	/* nick flood: the nick changes allowed in the specified period */
	max_nick_time = 20 seconds;
	max_nick_changes = 5;

        /* anti spam time: the minimum time a user must be connected before
	 * custom quit messages are allowed.
	 */
        anti_spam_exit_message_time = 5 minutes;

	/* ts delta: the time delta allowed between server clocks before
	 * a warning is given, or before the link is dropped.  all servers
	 * should run ntpdate/rdate to keep clocks in sync
	 */
	ts_warn_delta = 30 seconds;
	ts_max_delta = 5 minutes;

	/* client exit: prepend a users quit message with "Client exit: " */
	client_exit = yes;

	/* kline reason: show the user the reason why they are k/d/glined 
	 * on exit.  may give away who set k/dline when set via tcm.
	 */
	kline_with_reason = yes;

	/* kline connection closed: make the users quit message on channels
	 * to be "Connection closed", instead of the kline reason.
	 */
	kline_with_connection_closed = no;

	/* non redundant klines: flag and ignore redundant klines */
	non_redundant_klines = yes;

	/* warn no nline: warn opers about servers that try to connect but
	 * we dont have a connect {} block for.  Twits with misconfigured 
	 * servers can get really annoying with this enabled.
	 */
	warn_no_nline = yes;

	/* stats o oper only: make stats o (opers) oper only */
	stats_o_oper_only=yes;

	/* stats P oper only: make stats P (ports) oper only */
	stats_P_oper_only=no;

	/* stats i oper only: make stats i (auth {}) oper only. set to:
	 *     yes:    show users no auth blocks, made oper only.
	 *     masked: show users first matching auth block
	 *     no:     show users all auth blocks.
	 */
	stats_i_oper_only=masked;

	/* stats k/K oper only: make stats k/K (klines) oper only.  set to:
	 *     yes:    show users no auth blocks, made oper only
	 *     masked: show users first matching auth block
	 *     no:     show users all auth blocks.
	 */
	stats_k_oper_only=masked;
                                    
	/* caller id wait: time between notifying a +g user that somebody
	 * is messaging them.
	 */
	caller_id_wait = 1 minute;

	/* pace wait simple: time between use of less intensive commands
	 * (HELP, remote WHOIS, WHOWAS)
	 */
	pace_wait_simple = 1 second;

	/* pace wait: time between more intensive commands
	 * (ADMIN, INFO, LIST, LUSERS, MOTD, STATS, VERSION)
	 */
	pace_wait = 10 seconds;

	/* short motd: send clients a notice telling them to read the motd
	 * instead of forcing a motd to clients who may simply ignore it.
	 */
	short_motd = no;

	/* ping cookies: require clients to respond exactly to a ping command,
	 * can help block certain types of drones and FTP PASV mode spoofing.
	 */
	ping_cookie = no;

	/* no oper flood: increase flood limits for opers. */
	no_oper_flood = yes;

	/* glines: enable glines, network wide temp klines */
	glines = yes;

	/* gline time: the amount of time a gline will remain before exiring */
	gline_time = 1 day;

	/* idletime: the maximum amount of time a user may idle before
	 * they are disconnected
	 */
        idletime = 0;

	/* maximum links: the maximum amount of servers to connect to for
	 * connect blocks without a valid class.
	 */
	maximum_links = 1;

	/* REMOVE ME.  The following line checks you've been reading. */
	
	/* logfiles: the logfiles to use for user connects, /oper uses,
	 * and failed /oper.  These files must exist for logging to be used.
	 */
	fname_userlog = "logs/userlog";
	fname_operlog = "logs/operlog";
	fname_foperlog = "logs/foperlog";

	/* max targets: the maximum amount of targets in a single 
	 * PRIVMSG/NOTICE.  set to 999 NOT 0 for unlimited.
	 */
	max_targets = 4;

	/* client flood: maximum number of lines in a clients queue before
	 * they are dropped for flooding.
	 */
	client_flood = 20;

        /* use help: whether an improved help system per command is available
         * to users.  If this is disabled, users will just be shown a command
         * list.
         *
         * this is non-caching and the help file will be read per command
         * which should be an adverse consideration for large servers.
         */
        use_help = yes;

	/* message locale: the default message locale if gettext() is enabled
	 * and working.
	 * Use "custom" for the (in)famous Hybrid custom messages.
	 * Use "standard" for the compiled in defaults.
	 */
	message_locale = "custom";

	/* usermodes configurable: a list of usermodes for the options below
	 *
	 * +b - bots       - See bot and drone flooding notices
	 * +c - cconn      - Client connection/quit notices
	 * +d - debug      - See debugging notices
	 * +f - full       - See I: line full notices
	 * +g - callerid   - Server Side Ignore
	 * +i - invisible  - Not shown in NAMES or WHO unless you share a 
	 *                   a channel
	 * +k - skill      - See server generated KILL messages
	 * +l - locops     - See LOCOPS messages
	 * +n - nchange    - See client nick changes
	 * +r - rej        - See rejected client notices
	 * +s - servnotice - See general server notices
	 * +u - unauth     - See unauthorized client notices
	 * +w - wallop     - See server generated WALLOPS
	 * +x - external   - See remote server connection and split notices
	 * +y - spy        - See LINKS, STATS, TRACE notices etc.
	 * +z - operwall   - See oper generated WALLOPS
	 */
	 
	/* oper only umodes: usermodes only opers may set */
	oper_only_umodes = bots, cconn, debug, full, skill, nchange, 
                     rej, spy, external, operwall, locops, unauth;

	/* oper umodes: default usermodes opers get when they /oper */
	/* oper_umodes = locops, servnotice, operwall, wallop, bots, ccon, debug, full, skil, nchange, rej, spy, external; */

	/* servlink path: path to 'servlink' program used by ircd to handle
	 * encrypted/compressed server <-> server links.
	 *
	 * only define if servlink is not in same directory as ircd itself.
	 */
	#servlink_path = "/usr/local/ircd/bin/servlink";

	/* default cipher: default cipher to use for cryptlink when none is
	 * specified in connect block.
	 */
	#default_cipher_preference = "BF/256";

	/* use egd: if your system does not have *random devices yet you
	 * want to use OpenSSL and encrypted links, enable this.  Beware -
	 * EGD is *very* CPU intensive when gathering data for its pool
	 */
	#use_egd = yes;

	/* egdpool path: path to EGD pool. Not necessary for OpenSSL >= 0.9.7
	 * which automatically finds the path.
	 */
	#egdpool_path = "/var/run/egd-pool";


	/* compression level: level of compression for compressed links between
	 * servers.  
	 *
	 * values are between: 1 (least compression, fastest)
	 *                and: 9 (most compression, slowest).
	 */
	#compression_level = 6;

	/* throttle time: the minimum amount of time between connections from
	 * the same ip.  exempt {} blocks are excluded from this throttling.
	 * Offers protection against flooders who reconnect quickly.  
	 * Set to 0 to disable.
	 */
	throttle_time = 10;
};

modules {
	/* module path: paths to search for modules specified below and 
	 * in /modload.
	 */
	path = "/usr/local/ircd/modules";
	path = "/usr/local/ircd/modules/autoload";

	/* module: the name of a module to load on startup/rehash */
	#module = "some_module.so";
};