net/mlx5: Introducing E-Switch and l2 table

E-Switch is the software entity that represents and manages ConnectX4
inter-HCA ethernet l2 switching.

E-Switch has its own Virtual Ports, each Vport/vNIC/VF can be
connected to the device through a vport of an e-switch.

Each e-switch is managed by one vNIC identified by
HCA_CAP.vport_group_manager (usually it is the PF/vport[0]),
and its main responsibility is to forward each packet to the
right vport.

e-Switch needs to manage its own l2-table and FDB tables.

L2 table is a flow table that is managed by FW, it is needed for
Multi-host (Multi PF) configuration for inter HCA switching between
PFs.

FDB table is a flow table that is totally managed by e-Switch driver,
its main responsibility is to switch packets between e-Swtich internal
vports and uplink vport that belong to the same.

This patch introduces only e-Swtich l2 table management, FDB managemnt
will come later when ethernet SRIOV/VFs will be enabled.

preperation for ethernet sriov and l2 table management.

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlx5/core/Makefile

@@ -3,6 +3,6 @@ obj-$(CONFIG_MLX5_CORE)		+= mlx5_core.o
 mlx5_core-y :=	main.o cmd.o debugfs.o fw.o eq.o uar.o pagealloc.o \
 		health.o mcg.o cq.o srq.o alloc.o qp.o port.o mr.o pd.o   \
 		mad.o transobj.o vport.o sriov.o
-mlx5_core-$(CONFIG_MLX5_CORE_EN) += wq.o flow_table.o \
+mlx5_core-$(CONFIG_MLX5_CORE_EN) += wq.o flow_table.o eswitch.o \
 		en_main.o en_flow_table.o en_ethtool.o en_tx.o en_rx.o \
 		en_txrx.o

drivers/net/ethernet/mellanox/mlx5/core/eq.c

@@ -35,6 +35,9 @@
 #include <linux/mlx5/driver.h>
 #include <linux/mlx5/cmd.h>
 #include "mlx5_core.h"
+#ifdef CONFIG_MLX5_CORE_EN
+#include "eswitch.h"
+#endif
 
 enum {
 	MLX5_EQE_SIZE		= sizeof(struct mlx5_eqe),
@@ -287,6 +290,11 @@ static int mlx5_eq_int(struct mlx5_core_dev *dev, struct mlx5_eq *eq)
 			break;
 #endif
 
+#ifdef CONFIG_MLX5_CORE_EN
+		case MLX5_EVENT_TYPE_NIC_VPORT_CHANGE:
+			mlx5_eswitch_vport_event(dev->priv.eswitch, eqe);
+			break;
+#endif
 		default:
 			mlx5_core_warn(dev, "Unhandled event 0x%x on EQ 0x%x\n",
 				       eqe->type, eq->eqn);
@@ -459,6 +467,11 @@ int mlx5_start_eqs(struct mlx5_core_dev *dev)
 	if (MLX5_CAP_GEN(dev, pg))
 		async_event_mask |= (1ull << MLX5_EVENT_TYPE_PAGE_FAULT);
 
+	if (MLX5_CAP_GEN(dev, port_type) == MLX5_CAP_PORT_TYPE_ETH &&
+	    MLX5_CAP_GEN(dev, vport_group_manager) &&
+	    mlx5_core_is_pf(dev))
+		async_event_mask |= (1ull << MLX5_EVENT_TYPE_NIC_VPORT_CHANGE);
+
 	err = mlx5_create_map_eq(dev, &table->cmd_eq, MLX5_EQ_VEC_CMD,
 				 MLX5_NUM_CMD_EQE, 1ull << MLX5_EVENT_TYPE_CMD,
 				 "mlx5_cmd_eq", &dev->priv.uuari.uars[0]);

drivers/net/ethernet/mellanox/mlx5/core/eswitch.c

@@ -0,0 +1,500 @@
+/*
+ * Copyright (c) 2015, Mellanox Technologies. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/mlx5/driver.h>
+#include <linux/mlx5/mlx5_ifc.h>
+#include <linux/mlx5/vport.h>
+#include "mlx5_core.h"
+#include "eswitch.h"
+
+#define MLX5_DEBUG_ESWITCH_MASK BIT(3)
+
+#define esw_info(dev, format, ...)				\
+	pr_info("(%s): E-Switch: " format, (dev)->priv.name, ##__VA_ARGS__)
+
+#define esw_warn(dev, format, ...)				\
+	pr_warn("(%s): E-Switch: " format, (dev)->priv.name, ##__VA_ARGS__)
+
+#define esw_debug(dev, format, ...)				\
+	mlx5_core_dbg_mask(dev, MLX5_DEBUG_ESWITCH_MASK, format, ##__VA_ARGS__)
+
+enum {
+	MLX5_ACTION_NONE = 0,
+	MLX5_ACTION_ADD  = 1,
+	MLX5_ACTION_DEL  = 2,
+};
+
+/* HW UC L2 table hash node */
+struct mlx5_uc_l2addr {
+	struct l2addr_node node;
+	u8                 action;
+	u32                table_index;
+	u32                vport;
+};
+
+/* Vport UC L2 table hash node */
+struct mlx5_vport_addr {
+	struct l2addr_node node;
+	u8                 action;
+};
+
+enum {
+	UC_ADDR_CHANGE = BIT(0),
+	MC_ADDR_CHANGE = BIT(1),
+};
+
+static int arm_vport_context_events_cmd(struct mlx5_core_dev *dev, int vport,
+					u32 events_mask)
+{
+	int in[MLX5_ST_SZ_DW(modify_nic_vport_context_in)];
+	int out[MLX5_ST_SZ_DW(modify_nic_vport_context_out)];
+	void *nic_vport_ctx;
+	int err;
+
+	memset(out, 0, sizeof(out));
+	memset(in, 0, sizeof(in));
+
+	MLX5_SET(modify_nic_vport_context_in, in,
+		 opcode, MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);
+	MLX5_SET(modify_nic_vport_context_in, in, field_select.change_event, 1);
+	MLX5_SET(modify_nic_vport_context_in, in, vport_number, vport);
+	if (vport)
+		MLX5_SET(modify_nic_vport_context_in, in, other_vport, 1);
+	nic_vport_ctx = MLX5_ADDR_OF(modify_nic_vport_context_in,
+				     in, nic_vport_context);
+
+	MLX5_SET(nic_vport_context, nic_vport_ctx, arm_change_event, 1);
+
+	if (events_mask & UC_ADDR_CHANGE)
+		MLX5_SET(nic_vport_context, nic_vport_ctx,
+			 event_on_uc_address_change, 1);
+	if (events_mask & MC_ADDR_CHANGE)
+		MLX5_SET(nic_vport_context, nic_vport_ctx,
+			 event_on_mc_address_change, 1);
+
+	err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
+	if (err)
+		goto ex;
+	err = mlx5_cmd_status_to_err_v2(out);
+	if (err)
+		goto ex;
+	return 0;
+ex:
+	return err;
+}
+
+/* HW L2 Table (MPFS) management */
+static int set_l2_table_entry_cmd(struct mlx5_core_dev *dev, u32 index,
+				  u8 *mac, u8 vlan_valid, u16 vlan)
+{
+	u32 in[MLX5_ST_SZ_DW(set_l2_table_entry_in)];
+	u32 out[MLX5_ST_SZ_DW(set_l2_table_entry_out)];
+	u8 *in_mac_addr;
+
+	memset(in, 0, sizeof(in));
+	memset(out, 0, sizeof(out));
+
+	MLX5_SET(set_l2_table_entry_in, in, opcode,
+		 MLX5_CMD_OP_SET_L2_TABLE_ENTRY);
+	MLX5_SET(set_l2_table_entry_in, in, table_index, index);
+	MLX5_SET(set_l2_table_entry_in, in, vlan_valid, vlan_valid);
+	MLX5_SET(set_l2_table_entry_in, in, vlan, vlan);
+
+	in_mac_addr = MLX5_ADDR_OF(set_l2_table_entry_in, in, mac_address);
+	ether_addr_copy(&in_mac_addr[2], mac);
+
+	return mlx5_cmd_exec_check_status(dev, in, sizeof(in),
+					  out, sizeof(out));
+}
+
+static int del_l2_table_entry_cmd(struct mlx5_core_dev *dev, u32 index)
+{
+	u32 in[MLX5_ST_SZ_DW(delete_l2_table_entry_in)];
+	u32 out[MLX5_ST_SZ_DW(delete_l2_table_entry_out)];
+
+	memset(in, 0, sizeof(in));
+	memset(out, 0, sizeof(out));
+
+	MLX5_SET(delete_l2_table_entry_in, in, opcode,
+		 MLX5_CMD_OP_DELETE_L2_TABLE_ENTRY);
+	MLX5_SET(delete_l2_table_entry_in, in, table_index, index);
+	return mlx5_cmd_exec_check_status(dev, in, sizeof(in),
+					  out, sizeof(out));
+}
+
+static int alloc_l2_table_index(struct mlx5_l2_table *l2_table, u32 *ix)
+{
+	int err = 0;
+
+	*ix = find_first_zero_bit(l2_table->bitmap, l2_table->size);
+	if (*ix >= l2_table->size)
+		err = -ENOSPC;
+	else
+		__set_bit(*ix, l2_table->bitmap);
+
+	return err;
+}
+
+static void free_l2_table_index(struct mlx5_l2_table *l2_table, u32 ix)
+{
+	__clear_bit(ix, l2_table->bitmap);
+}
+
+static int set_l2_table_entry(struct mlx5_core_dev *dev, u8 *mac,
+			      u8 vlan_valid, u16 vlan,
+			      u32 *index)
+{
+	struct mlx5_l2_table *l2_table = &dev->priv.eswitch->l2_table;
+	int err;
+
+	err = alloc_l2_table_index(l2_table, index);
+	if (err)
+		return err;
+
+	err = set_l2_table_entry_cmd(dev, *index, mac, vlan_valid, vlan);
+	if (err)
+		free_l2_table_index(l2_table, *index);
+
+	return err;
+}
+
+static void del_l2_table_entry(struct mlx5_core_dev *dev, u32 index)
+{
+	struct mlx5_l2_table *l2_table = &dev->priv.eswitch->l2_table;
+
+	del_l2_table_entry_cmd(dev, index);
+	free_l2_table_index(l2_table, index);
+}
+
+/* SW E-Switch L2 Table management */
+static int l2_table_addr_add(struct mlx5_eswitch *esw,
+			     u8 mac[ETH_ALEN], u32 vport)
+{
+	struct hlist_head *hash;
+	struct mlx5_uc_l2addr *addr;
+	int err;
+
+	hash = esw->l2_table.l2_hash;
+	addr = l2addr_hash_find(hash, mac, struct mlx5_uc_l2addr);
+	if (addr) {
+		esw_warn(esw->dev,
+			 "Failed to set L2 mac(%pM) for vport(%d), mac is already in use by vport(%d)\n",
+			 mac, vport, addr->vport);
+		return -EEXIST;
+	}
+
+	addr = l2addr_hash_add(hash, mac, struct mlx5_uc_l2addr,
+			       GFP_KERNEL);
+	if (!addr)
+		return -ENOMEM;
+
+	addr->vport = vport;
+	addr->action = MLX5_ACTION_NONE;
+	err = set_l2_table_entry(esw->dev, mac, 0, 0, &addr->table_index);
+	if (err)
+		l2addr_hash_del(addr);
+	else
+		esw_debug(esw->dev, "\tADDED L2 MAC: vport[%d] %pM index:%d\n",
+			  vport, addr->node.addr, addr->table_index);
+	return err;
+}
+
+static int l2_table_addr_del(struct mlx5_eswitch *esw,
+			     u8 mac[ETH_ALEN], u32 vport)
+{
+	struct hlist_head *hash;
+	struct mlx5_uc_l2addr *addr;
+
+	hash = esw->l2_table.l2_hash;
+	addr = l2addr_hash_find(hash, mac, struct mlx5_uc_l2addr);
+	if (!addr || addr->vport != vport) {
+		esw_warn(esw->dev, "MAC(%pM) doesn't belong to vport (%d)\n",
+			 mac, vport);
+		return -EINVAL;
+	}
+
+	esw_debug(esw->dev, "\tDELETE L2 MAC: vport[%d] %pM index:%d\n",
+		  vport, addr->node.addr, addr->table_index);
+	del_l2_table_entry(esw->dev, addr->table_index);
+	l2addr_hash_del(addr);
+	return 0;
+}
+
+/* E-Switch vport uc list management */
+
+/* Apply vport uc list to HW l2 table */
+static void esw_apply_vport_uc_list(struct mlx5_eswitch *esw,
+				    u32 vport_num)
+{
+	struct mlx5_vport *vport = &esw->vports[vport_num];
+	struct mlx5_vport_addr *addr;
+	struct l2addr_node *node;
+	struct hlist_head *hash;
+	struct hlist_node *tmp;
+	int hi;
+
+	hash = vport->uc_list;
+	for_each_l2hash_node(node, tmp, hash, hi) {
+		addr = container_of(node, struct mlx5_vport_addr, node);
+		switch (addr->action) {
+		case MLX5_ACTION_ADD:
+			l2_table_addr_add(esw, addr->node.addr, vport_num);
+			addr->action = MLX5_ACTION_NONE;
+			break;
+		case MLX5_ACTION_DEL:
+			l2_table_addr_del(esw, addr->node.addr, vport_num);
+			l2addr_hash_del(addr);
+			break;
+		}
+	}
+}
+
+/* Sync vport uc list from vport context */
+static void esw_update_vport_uc_list(struct mlx5_eswitch *esw,
+				     u32 vport_num)
+{
+	struct mlx5_vport *vport = &esw->vports[vport_num];
+	struct mlx5_vport_addr *addr;
+	struct l2addr_node *node;
+	u8 (*mac_list)[ETH_ALEN];
+	struct hlist_head *hash;
+	struct hlist_node *tmp;
+	int size;
+	int err;
+	int hi;
+	int i;
+
+	size = MLX5_MAX_UC_PER_VPORT(esw->dev);
+
+	mac_list = kcalloc(size, ETH_ALEN, GFP_KERNEL);
+	if (!mac_list)
+		return;
+
+	hash = vport->uc_list;
+
+	for_each_l2hash_node(node, tmp, hash, hi) {
+		addr = container_of(node, struct mlx5_vport_addr, node);
+		addr->action = MLX5_ACTION_DEL;
+	}
+
+	err = mlx5_query_nic_vport_mac_list(esw->dev, vport_num,
+					    MLX5_NVPRT_LIST_TYPE_UC,
+					    mac_list, &size);
+	if (err)
+		return;
+	esw_debug(esw->dev, "vport[%d] context update UC list size (%d)\n",
+		  vport_num, size);
+
+	for (i = 0; i < size; i++) {
+		if (!is_valid_ether_addr(mac_list[i]))
+			continue;
+
+		addr = l2addr_hash_find(hash, mac_list[i],
+					struct mlx5_vport_addr);
+		if (addr) {
+			addr->action = MLX5_ACTION_NONE;
+			continue;
+		}
+
+		addr = l2addr_hash_add(hash, mac_list[i],
+				       struct mlx5_vport_addr,
+				       GFP_KERNEL);
+		if (!addr) {
+			esw_warn(esw->dev,
+				 "Failed to add MAC(%pM) to vport[%d] DB\n",
+				 mac_list[i], vport_num);
+			continue;
+		}
+		addr->action = MLX5_ACTION_ADD;
+	}
+	kfree(mac_list);
+}
+
+static void esw_vport_change_handler(struct work_struct *work)
+{
+	struct mlx5_vport *vport =
+		container_of(work, struct mlx5_vport, vport_change_handler);
+	struct mlx5_core_dev *dev = vport->dev;
+	u8 mac[ETH_ALEN];
+
+	mlx5_query_nic_vport_mac_address(dev, vport->vport, mac);
+
+	if (!is_valid_ether_addr(mac))
+		goto out;
+
+	esw_update_vport_uc_list(dev->priv.eswitch, vport->vport);
+	esw_apply_vport_uc_list(dev->priv.eswitch, vport->vport);
+
+out:
+	if (vport->enabled)
+		arm_vport_context_events_cmd(dev, vport->vport,
+					     UC_ADDR_CHANGE);
+}
+
+static void esw_enable_vport(struct mlx5_eswitch *esw, int vport_num)
+{
+	struct mlx5_vport *vport = &esw->vports[vport_num];
+	unsigned long flags;
+
+	spin_lock_irqsave(&vport->lock, flags);
+	vport->enabled = true;
+	spin_unlock_irqrestore(&vport->lock, flags);
+
+	arm_vport_context_events_cmd(esw->dev, vport_num, UC_ADDR_CHANGE);
+}
+
+static void esw_disable_vport(struct mlx5_eswitch *esw, int vport_num)
+{
+	struct mlx5_vport *vport = &esw->vports[vport_num];
+	unsigned long flags;
+
+	if (!vport->enabled)
+		return;
+
+	/* Mark this vport as disabled to discard new events */
+	spin_lock_irqsave(&vport->lock, flags);
+	vport->enabled = false;
+	spin_unlock_irqrestore(&vport->lock, flags);
+
+	/* Wait for current already scheduled events to complete */
+	flush_workqueue(esw->work_queue);
+
+	/* Disable events from this vport */
+	arm_vport_context_events_cmd(esw->dev, vport->vport, 0);
+}
+
+/* Public E-Switch API */
+int mlx5_eswitch_init(struct mlx5_core_dev *dev)
+{
+	int l2_table_size = 1 << MLX5_CAP_GEN(dev, log_max_l2_table);
+	int total_vports = 1 + pci_sriov_get_totalvfs(dev->pdev);
+	struct mlx5_eswitch *esw;
+	int vport_num;
+	int err;
+
+	if (!MLX5_CAP_GEN(dev, vport_group_manager) ||
+	    MLX5_CAP_GEN(dev, port_type) != MLX5_CAP_PORT_TYPE_ETH)
+		return 0;
+
+	esw_info(dev,
+		 "Total vports %d, l2 table size(%d), per vport: max uc(%d) max mc(%d)\n",
+		 total_vports, l2_table_size,
+		 MLX5_MAX_UC_PER_VPORT(dev),
+		 MLX5_MAX_MC_PER_VPORT(dev));
+
+	esw = kzalloc(sizeof(*esw), GFP_KERNEL);
+	if (!esw)
+		return -ENOMEM;
+
+	esw->dev = dev;
+
+	esw->l2_table.bitmap = kcalloc(BITS_TO_LONGS(l2_table_size),
+				   sizeof(uintptr_t), GFP_KERNEL);
+	if (!esw->l2_table.bitmap) {
+		err = -ENOMEM;
+		goto abort;
+	}
+	esw->l2_table.size = l2_table_size;
+
+	esw->work_queue = create_singlethread_workqueue("mlx5_esw_wq");
+	if (!esw->work_queue) {
+		err = -ENOMEM;
+		goto abort;
+	}
+
+	esw->vports = kcalloc(total_vports, sizeof(struct mlx5_vport),
+			      GFP_KERNEL);
+	if (!esw->vports) {
+		err = -ENOMEM;
+		goto abort;
+	}
+
+	esw->total_vports = total_vports;
+	for (vport_num = 0; vport_num < total_vports; vport_num++) {
+		struct mlx5_vport *vport = &esw->vports[vport_num];
+
+		vport->vport = vport_num;
+		vport->dev = dev;
+		INIT_WORK(&vport->vport_change_handler,
+			  esw_vport_change_handler);
+		spin_lock_init(&vport->lock);
+	}
+
+	dev->priv.eswitch = esw;
+
+	esw_enable_vport(esw, 0);
+	/* VF Vports will be enabled when SRIOV is enabled */
+	return 0;
+abort:
+	if (esw->work_queue)
+		destroy_workqueue(esw->work_queue);
+	kfree(esw->l2_table.bitmap);
+	kfree(esw->vports);
+	kfree(esw);
+	return err;
+}
+
+void mlx5_eswitch_cleanup(struct mlx5_eswitch *esw)
+{
+	if (!esw || !MLX5_CAP_GEN(esw->dev, vport_group_manager) ||
+	    MLX5_CAP_GEN(esw->dev, port_type) != MLX5_CAP_PORT_TYPE_ETH)
+		return;
+
+	esw_info(esw->dev, "cleanup\n");
+	esw_disable_vport(esw, 0);
+
+	esw->dev->priv.eswitch = NULL;
+	destroy_workqueue(esw->work_queue);
+	kfree(esw->l2_table.bitmap);
+	kfree(esw->vports);
+	kfree(esw);
+}
+
+void mlx5_eswitch_vport_event(struct mlx5_eswitch *esw, struct mlx5_eqe *eqe)
+{
+	struct mlx5_eqe_vport_change *vc_eqe = &eqe->data.vport_change;
+	u16 vport_num = be16_to_cpu(vc_eqe->vport_num);
+	struct mlx5_vport *vport;
+
+	if (!esw) {
+		pr_warn("MLX5 E-Switch: vport %d got an event while eswitch is not initialized\n",
+			vport_num);
+		return;
+	}
+
+	vport = &esw->vports[vport_num];
+	spin_lock(&vport->lock);
+	if (vport->enabled)
+		queue_work(esw->work_queue, &vport->vport_change_handler);
+	spin_unlock(&vport->lock);
+}

drivers/net/ethernet/mellanox/mlx5/core/eswitch.h

@@ -0,0 +1,122 @@
+/*
+ * Copyright (c) 2015, Mellanox Technologies, Ltd.  All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef __MLX5_ESWITCH_H__
+#define __MLX5_ESWITCH_H__
+
+#include <linux/mlx5/device.h>
+
+#define MLX5_MAX_UC_PER_VPORT(dev) \
+	(1 << MLX5_CAP_GEN(dev, log_max_current_uc_list))
+
+#define MLX5_MAX_MC_PER_VPORT(dev) \
+	(1 << MLX5_CAP_GEN(dev, log_max_current_mc_list))
+
+#define MLX5_L2_ADDR_HASH_SIZE (BIT(BITS_PER_BYTE))
+#define MLX5_L2_ADDR_HASH(addr) (addr[5])
+
+/* L2 -mac address based- hash helpers */
+struct l2addr_node {
+	struct hlist_node hlist;
+	u8                addr[ETH_ALEN];
+};
+
+#define for_each_l2hash_node(hn, tmp, hash, i) \
+	for (i = 0; i < MLX5_L2_ADDR_HASH_SIZE; i++) \
+		hlist_for_each_entry_safe(hn, tmp, &hash[i], hlist)
+
+#define l2addr_hash_find(hash, mac, type) ({                \
+	int ix = MLX5_L2_ADDR_HASH(mac);                    \
+	bool found = false;                                 \
+	type *ptr = NULL;                                   \
+							    \
+	hlist_for_each_entry(ptr, &hash[ix], node.hlist)    \
+		if (ether_addr_equal(ptr->node.addr, mac)) {\
+			found = true;                       \
+			break;                              \
+		}                                           \
+	if (!found)                                         \
+		ptr = NULL;                                 \
+	ptr;                                                \
+})
+
+#define l2addr_hash_add(hash, mac, type, gfp) ({            \
+	int ix = MLX5_L2_ADDR_HASH(mac);                    \
+	type *ptr = NULL;                                   \
+							    \
+	ptr = kzalloc(sizeof(type), gfp);                   \
+	if (ptr) {                                          \
+		ether_addr_copy(ptr->node.addr, mac);       \
+		hlist_add_head(&ptr->node.hlist, &hash[ix]);\
+	}                                                   \
+	ptr;                                                \
+})
+
+#define l2addr_hash_del(ptr) ({                             \
+	hlist_del(&ptr->node.hlist);                        \
+	kfree(ptr);                                         \
+})
+
+struct mlx5_vport {
+	struct mlx5_core_dev    *dev;
+	int                     vport;
+	struct hlist_head       uc_list[MLX5_L2_ADDR_HASH_SIZE];
+	struct work_struct      vport_change_handler;
+
+	/* This spinlock protects access to vport data, between
+	 * "esw_vport_disable" and ongoing interrupt "mlx5_eswitch_vport_event"
+	 * once vport marked as disabled new interrupts are discarded.
+	 */
+	spinlock_t              lock; /* vport events sync */
+	bool                    enabled;
+};
+
+struct mlx5_l2_table {
+	struct hlist_head l2_hash[MLX5_L2_ADDR_HASH_SIZE];
+	u32                  size;
+	unsigned long        *bitmap;
+};
+
+struct mlx5_eswitch {
+	struct mlx5_core_dev    *dev;
+	struct mlx5_l2_table    l2_table;
+	struct workqueue_struct *work_queue;
+	struct mlx5_vport       *vports;
+	int                     total_vports;
+};
+
+/* E-Switch API */
+int mlx5_eswitch_init(struct mlx5_core_dev *dev);
+void mlx5_eswitch_cleanup(struct mlx5_eswitch *esw);
+void mlx5_eswitch_vport_event(struct mlx5_eswitch *esw, struct mlx5_eqe *eqe);
+
+#endif /* __MLX5_ESWITCH_H__ */

drivers/net/ethernet/mellanox/mlx5/core/main.c

@@ -49,6 +49,9 @@
 #include <linux/delay.h>
 #include <linux/mlx5/mlx5_ifc.h>
 #include "mlx5_core.h"
+#ifdef CONFIG_MLX5_CORE_EN
+#include "eswitch.h"
+#endif
 
 MODULE_AUTHOR("Eli Cohen <eli@mellanox.com>");
 MODULE_DESCRIPTION("Mellanox Connect-IB, ConnectX-4 core driver");
@@ -1052,6 +1055,14 @@ static int mlx5_load_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv)
 	mlx5_init_srq_table(dev);
 	mlx5_init_mr_table(dev);
 
+#ifdef CONFIG_MLX5_CORE_EN
+	err = mlx5_eswitch_init(dev);
+	if (err) {
+		dev_err(&pdev->dev, "eswitch init failed %d\n", err);
+		goto err_reg_dev;
+	}
+#endif
+
 	err = mlx5_sriov_init(dev);
 	if (err) {
 		dev_err(&pdev->dev, "sriov init failed %d\n", err);
@@ -1078,6 +1089,9 @@ err_sriov:
 	if (mlx5_sriov_cleanup(dev))
 		dev_err(&dev->pdev->dev, "sriov cleanup failed\n");
 
+#ifdef CONFIG_MLX5_CORE_EN
+	mlx5_eswitch_cleanup(dev->priv.eswitch);
+#endif
 err_reg_dev:
 	mlx5_cleanup_mr_table(dev);
 	mlx5_cleanup_srq_table(dev);
@@ -1147,6 +1161,10 @@ static int mlx5_unload_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv)
 		goto out;
 	}
 	mlx5_unregister_device(dev);
+#ifdef CONFIG_MLX5_CORE_EN
+	mlx5_eswitch_cleanup(dev->priv.eswitch);
+#endif
+
 	mlx5_cleanup_mr_table(dev);
 	mlx5_cleanup_srq_table(dev);
 	mlx5_cleanup_qp_table(dev);

include/linux/mlx5/device.h

@@ -251,6 +251,7 @@ enum mlx5_event {
 	MLX5_EVENT_TYPE_PAGE_REQUEST	   = 0xb,
 
 	MLX5_EVENT_TYPE_PAGE_FAULT	   = 0xc,
+	MLX5_EVENT_TYPE_NIC_VPORT_CHANGE   = 0xd,
 };
 
 enum {
@@ -520,6 +521,12 @@ struct mlx5_eqe_page_fault {
 	__be32 flags_qpn;
 } __packed;
 
+struct mlx5_eqe_vport_change {
+	u8		rsvd0[2];
+	__be16		vport_num;
+	__be32		rsvd1[6];
+} __packed;
+
 union ev_data {
 	__be32				raw[7];
 	struct mlx5_eqe_cmd		cmd;
@@ -532,6 +539,7 @@ union ev_data {
 	struct mlx5_eqe_stall_vl	stall_vl;
 	struct mlx5_eqe_page_req	req_pages;
 	struct mlx5_eqe_page_fault	page_fault;
+	struct mlx5_eqe_vport_change	vport_change;
 } __packed;
 
 struct mlx5_eqe {

include/linux/mlx5/driver.h

@@ -441,6 +441,8 @@ struct mlx5_irq_info {
 	char name[MLX5_MAX_IRQ_NAME];
 };
 
+struct mlx5_eswitch;
+
 struct mlx5_priv {
 	char			name[MLX5_MAX_NAME_LEN];
 	struct mlx5_eq_table	eq_table;
@@ -496,6 +498,8 @@ struct mlx5_priv {
 	struct list_head        dev_list;
 	struct list_head        ctx_list;
 	spinlock_t              ctx_lock;
+
+	struct mlx5_eswitch     *eswitch;
 	struct mlx5_core_sriov	sriov;
 	unsigned long		pci_dev_data;
 };