From e7312efbd5dec50d791dd98bd92ec9ae4f05a832 Mon Sep 17 00:00:00 2001 From: Tao Ren Date: Tue, 22 Oct 2019 11:31:06 -0700 Subject: [PATCH 1/3] net: phy: modify assignment to OR for dev_flags in phy_attach_direct Modify the assignment to OR when dealing with phydev->dev_flags in phy_attach_direct function, and this is to make sure dev_flags set in driver's probe callback won't be lost. Suggested-by: Andrew Lunn CC: Heiner Kallweit CC: Vladimir Oltean Signed-off-by: Tao Ren Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index adb66a2fae18..f1f60bd4865a 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1270,7 +1270,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, phydev_err(phydev, "error creating 'phy_standalone' sysfs entry\n"); } - phydev->dev_flags = flags; + phydev->dev_flags |= flags; phydev->interface = interface; From fa6e98cee558622565c97924e922b97340aeabd8 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Tue, 22 Oct 2019 11:31:07 -0700 Subject: [PATCH 2/3] net: phy: add support for clause 37 auto-negotiation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds support for clause 37 1000Base-X auto-negotiation. Signed-off-by: Heiner Kallweit Signed-off-by: Tao Ren Tested-by: René van Dorst Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 139 +++++++++++++++++++++++++++++++++++ include/linux/phy.h | 4 + 2 files changed, 143 insertions(+) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index f1f60bd4865a..fa71998fea51 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1607,6 +1607,40 @@ static int genphy_config_advert(struct phy_device *phydev) return changed; } +/** + * genphy_c37_config_advert - sanitize and advertise auto-negotiation parameters + * @phydev: target phy_device struct + * + * Description: Writes MII_ADVERTISE with the appropriate values, + * after sanitizing the values to make sure we only advertise + * what is supported. Returns < 0 on error, 0 if the PHY's advertisement + * hasn't changed, and > 0 if it has changed. This function is intended + * for Clause 37 1000Base-X mode. + */ +static int genphy_c37_config_advert(struct phy_device *phydev) +{ + u16 adv = 0; + + /* Only allow advertising what this PHY supports */ + linkmode_and(phydev->advertising, phydev->advertising, + phydev->supported); + + if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, + phydev->advertising)) + adv |= ADVERTISE_1000XFULL; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, + phydev->advertising)) + adv |= ADVERTISE_1000XPAUSE; + if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + phydev->advertising)) + adv |= ADVERTISE_1000XPSE_ASYM; + + return phy_modify_changed(phydev, MII_ADVERTISE, + ADVERTISE_1000XFULL | ADVERTISE_1000XPAUSE | + ADVERTISE_1000XHALF | ADVERTISE_1000XPSE_ASYM, + adv); +} + /** * genphy_config_eee_advert - disable unwanted eee mode advertisement * @phydev: target phy_device struct @@ -1715,6 +1749,54 @@ int __genphy_config_aneg(struct phy_device *phydev, bool changed) } EXPORT_SYMBOL(__genphy_config_aneg); +/** + * genphy_c37_config_aneg - restart auto-negotiation or write BMCR + * @phydev: target phy_device struct + * + * Description: If auto-negotiation is enabled, we configure the + * advertising, and then restart auto-negotiation. If it is not + * enabled, then we write the BMCR. This function is intended + * for use with Clause 37 1000Base-X mode. + */ +int genphy_c37_config_aneg(struct phy_device *phydev) +{ + int err, changed; + + if (phydev->autoneg != AUTONEG_ENABLE) + return genphy_setup_forced(phydev); + + err = phy_modify(phydev, MII_BMCR, BMCR_SPEED1000 | BMCR_SPEED100, + BMCR_SPEED1000); + if (err) + return err; + + changed = genphy_c37_config_advert(phydev); + if (changed < 0) /* error */ + return changed; + + if (!changed) { + /* Advertisement hasn't changed, but maybe aneg was never on to + * begin with? Or maybe phy was isolated? + */ + int ctl = phy_read(phydev, MII_BMCR); + + if (ctl < 0) + return ctl; + + if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) + changed = 1; /* do restart aneg */ + } + + /* Only restart aneg if we are advertising something different + * than we were before. + */ + if (changed > 0) + return genphy_restart_aneg(phydev); + + return 0; +} +EXPORT_SYMBOL(genphy_c37_config_aneg); + /** * genphy_aneg_done - return auto-negotiation status * @phydev: target phy_device struct @@ -1886,6 +1968,63 @@ int genphy_read_status(struct phy_device *phydev) } EXPORT_SYMBOL(genphy_read_status); +/** + * genphy_c37_read_status - check the link status and update current link state + * @phydev: target phy_device struct + * + * Description: Check the link, then figure out the current state + * by comparing what we advertise with what the link partner + * advertises. This function is for Clause 37 1000Base-X mode. + */ +int genphy_c37_read_status(struct phy_device *phydev) +{ + int lpa, err, old_link = phydev->link; + + /* Update the link, but return if there was an error */ + err = genphy_update_link(phydev); + if (err) + return err; + + /* why bother the PHY if nothing can have changed */ + if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) + return 0; + + phydev->duplex = DUPLEX_UNKNOWN; + phydev->pause = 0; + phydev->asym_pause = 0; + + if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) { + lpa = phy_read(phydev, MII_LPA); + if (lpa < 0) + return lpa; + + linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + phydev->lp_advertising, lpa & LPA_LPACK); + linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, + phydev->lp_advertising, lpa & LPA_1000XFULL); + linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT, + phydev->lp_advertising, lpa & LPA_1000XPAUSE); + linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, + phydev->lp_advertising, + lpa & LPA_1000XPAUSE_ASYM); + + phy_resolve_aneg_linkmode(phydev); + } else if (phydev->autoneg == AUTONEG_DISABLE) { + int bmcr = phy_read(phydev, MII_BMCR); + + if (bmcr < 0) + return bmcr; + + if (bmcr & BMCR_FULLDPLX) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + } + + return 0; +} +EXPORT_SYMBOL(genphy_c37_read_status); + /** * genphy_soft_reset - software reset the PHY via BMCR_RESET bit * @phydev: target phy_device struct diff --git a/include/linux/phy.h b/include/linux/phy.h index 9a0e981df502..78436d58ce7c 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -1106,6 +1106,10 @@ int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad, int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum, u16 regnum, u16 val); +/* Clause 37 */ +int genphy_c37_config_aneg(struct phy_device *phydev); +int genphy_c37_read_status(struct phy_device *phydev); + /* Clause 45 PHY */ int genphy_c45_restart_aneg(struct phy_device *phydev); int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart); From b9bcb95315febd09419ab870ddc7cb98a393f9d0 Mon Sep 17 00:00:00 2001 From: Tao Ren Date: Tue, 22 Oct 2019 11:31:08 -0700 Subject: [PATCH 3/3] net: phy: broadcom: add 1000Base-X support for BCM54616S The BCM54616S PHY cannot work properly in RGMII->1000Base-X mode, mainly because genphy functions are designed for copper links, and 1000Base-X (clause 37) auto negotiation needs to be handled differently. This patch enables 1000Base-X support for BCM54616S by customizing 3 driver callbacks, and it's verified to be working on Facebook CMM BMC platform (RGMII->1000Base-KX): - probe: probe callback detects PHY's operation mode based on INTERF_SEL[1:0] pins and 1000X/100FX selection bit in SerDES 100-FX Control register. - config_aneg: calls genphy_c37_config_aneg when the PHY is running in 1000Base-X mode; otherwise, genphy_config_aneg will be called. - read_status: calls genphy_c37_read_status when the PHY is running in 1000Base-X mode; otherwise, genphy_read_status will be called. Note: BCM54616S PHY can also be configured in RGMII->100Base-FX mode, and 100Base-FX support is not available as of now. Signed-off-by: Tao Ren Acked-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/broadcom.c | 57 +++++++++++++++++++++++++++++++++++--- include/linux/brcmphy.h | 10 +++++-- 2 files changed, 61 insertions(+), 6 deletions(-) diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index 4313c74b4fd8..7d68b28bb893 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -359,9 +359,9 @@ static int bcm5482_config_init(struct phy_device *phydev) /* * Select 1000BASE-X register set (primary SerDes) */ - reg = bcm_phy_read_shadow(phydev, BCM5482_SHD_MODE); - bcm_phy_write_shadow(phydev, BCM5482_SHD_MODE, - reg | BCM5482_SHD_MODE_1000BX); + reg = bcm_phy_read_shadow(phydev, BCM54XX_SHD_MODE); + bcm_phy_write_shadow(phydev, BCM54XX_SHD_MODE, + reg | BCM54XX_SHD_MODE_1000BX); /* * LED1=ACTIVITYLED, LED3=LINKSPD[2] @@ -427,12 +427,47 @@ static int bcm5481_config_aneg(struct phy_device *phydev) return ret; } +static int bcm54616s_probe(struct phy_device *phydev) +{ + int val, intf_sel; + + val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_MODE); + if (val < 0) + return val; + + /* The PHY is strapped in RGMII-fiber mode when INTERF_SEL[1:0] + * is 01b, and the link between PHY and its link partner can be + * either 1000Base-X or 100Base-FX. + * RGMII-1000Base-X is properly supported, but RGMII-100Base-FX + * support is still missing as of now. + */ + intf_sel = (val & BCM54XX_SHD_INTF_SEL_MASK) >> 1; + if (intf_sel == 1) { + val = bcm_phy_read_shadow(phydev, BCM54616S_SHD_100FX_CTRL); + if (val < 0) + return val; + + /* Bit 0 of the SerDes 100-FX Control register, when set + * to 1, sets the MII/RGMII -> 100BASE-FX configuration. + * When this bit is set to 0, it sets the GMII/RGMII -> + * 1000BASE-X configuration. + */ + if (!(val & BCM54616S_100FX_MODE)) + phydev->dev_flags |= PHY_BCM_FLAGS_MODE_1000BX; + } + + return 0; +} + static int bcm54616s_config_aneg(struct phy_device *phydev) { int ret; /* Aneg firsly. */ - ret = genphy_config_aneg(phydev); + if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX) + ret = genphy_c37_config_aneg(phydev); + else + ret = genphy_config_aneg(phydev); /* Then we can set up the delay. */ bcm54xx_config_clock_delay(phydev); @@ -440,6 +475,18 @@ static int bcm54616s_config_aneg(struct phy_device *phydev) return ret; } +static int bcm54616s_read_status(struct phy_device *phydev) +{ + int err; + + if (phydev->dev_flags & PHY_BCM_FLAGS_MODE_1000BX) + err = genphy_c37_read_status(phydev); + else + err = genphy_read_status(phydev); + + return err; +} + static int brcm_phy_setbits(struct phy_device *phydev, int reg, int set) { int val; @@ -631,6 +678,8 @@ static struct phy_driver broadcom_drivers[] = { .config_aneg = bcm54616s_config_aneg, .ack_interrupt = bcm_phy_ack_intr, .config_intr = bcm_phy_config_intr, + .read_status = bcm54616s_read_status, + .probe = bcm54616s_probe, }, { .phy_id = PHY_ID_BCM5464, .phy_id_mask = 0xfffffff0, diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index 6db2d9a6e503..b475e7f20d28 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -200,9 +200,15 @@ #define BCM5482_SHD_SSD 0x14 /* 10100: Secondary SerDes control */ #define BCM5482_SHD_SSD_LEDM 0x0008 /* SSD LED Mode enable */ #define BCM5482_SHD_SSD_EN 0x0001 /* SSD enable */ -#define BCM5482_SHD_MODE 0x1f /* 11111: Mode Control Register */ -#define BCM5482_SHD_MODE_1000BX 0x0001 /* Enable 1000BASE-X registers */ +/* 10011: SerDes 100-FX Control Register */ +#define BCM54616S_SHD_100FX_CTRL 0x13 +#define BCM54616S_100FX_MODE BIT(0) /* 100-FX SerDes Enable */ + +/* 11111: Mode Control Register */ +#define BCM54XX_SHD_MODE 0x1f +#define BCM54XX_SHD_INTF_SEL_MASK GENMASK(2, 1) /* INTERF_SEL[1:0] */ +#define BCM54XX_SHD_MODE_1000BX BIT(0) /* Enable 1000-X registers */ /* * EXPANSION SHADOW ACCESS REGISTERS. (PHY REG 0x15, 0x16, and 0x17)