Documentation: ACPI: move gpio-properties.txt to firmware-guide/acpi and convert to reST

This converts the plain text documentation to reStructuredText format
and adds it to Sphinx TOC tree.

No essential content change.

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Documentation/firmware-guide/acpi/gpio-properties.rst

@@ -1,5 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
 _DSD Device Properties Related to GPIO
---------------------------------------
+======================================
 
 With the release of ACPI 5.1, the _DSD configuration object finally
 allows names to be given to GPIOs (and other things as well) returned
@@ -8,7 +11,7 @@ the corresponding GPIO, which is pretty error prone (it depends on
 the _CRS output ordering, for example).
 
 With _DSD we can now query GPIOs using a name instead of an integer
-index, like the ASL example below shows:
+index, like the ASL example below shows::
 
   // Bluetooth device with reset and shutdown GPIOs
   Device (BTH)
@@ -34,15 +37,19 @@ index, like the ASL example below shows:
       })
   }
 
-The format of the supported GPIO property is:
+The format of the supported GPIO property is::
 
   Package () { "name", Package () { ref, index, pin, active_low }}
 
-  ref - The device that has _CRS containing GpioIo()/GpioInt() resources,
+ref
+  The device that has _CRS containing GpioIo()/GpioInt() resources,
   typically this is the device itself (BTH in our case).
-  index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero.
+index
-  pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero.
+  Index of the GpioIo()/GpioInt() resource in _CRS starting from zero.
-  active_low - If 1 the GPIO is marked as active_low.
+pin
+  Pin in the GpioIo()/GpioInt() resource. Typically this is zero.
+active_low
+  If 1 the GPIO is marked as active_low.
 
 Since ACPI GpioIo() resource does not have a field saying whether it is
 active low or high, the "active_low" argument can be used here.  Setting
@@ -55,7 +62,7 @@ It is possible to leave holes in the array of GPIOs. This is useful in
 cases like with SPI host controllers where some chip selects may be
 implemented as GPIOs and some as native signals. For example a SPI host
 controller can have chip selects 0 and 2 implemented as GPIOs and 1 as
-native:
+native::
 
   Package () {
       "cs-gpios",
@@ -67,7 +74,7 @@ native:
   }
 
 Other supported properties
---------------------------
+==========================
 
 Following Device Tree compatible device properties are also supported by
 _DSD device properties for GPIO controllers:
@@ -78,7 +85,7 @@ _DSD device properties for GPIO controllers:
 - input
 - line-name
 
-Example:
+Example::
 
   Name (_DSD, Package () {
       // _DSD Hierarchical Properties Extension UUID
@@ -100,7 +107,7 @@ Example:
 
 - gpio-line-names
 
-Example:
+Example::
 
   Package () {
       "gpio-line-names",
@@ -114,7 +121,7 @@ See Documentation/devicetree/bindings/gpio/gpio.txt for more information
 about these properties.
 
 ACPI GPIO Mappings Provided by Drivers
---------------------------------------
+======================================
 
 There are systems in which the ACPI tables do not contain _DSD but provide _CRS
 with GpioIo()/GpioInt() resources and device drivers still need to work with
@@ -139,7 +146,7 @@ line in that resource starting from zero, and the active-low flag for that line,
 respectively, in analogy with the _DSD GPIO property format specified above.
 
 For the example Bluetooth device discussed previously the data structures in
-question would look like this:
+question would look like this::
 
   static const struct acpi_gpio_params reset_gpio = { 1, 1, false };
   static const struct acpi_gpio_params shutdown_gpio = { 0, 0, false };
@@ -158,12 +165,12 @@ calling acpi_dev_remove_driver_gpios() on the ACPI device object where that
 table was previously registered.
 
 Using the _CRS fallback
------------------------
+=======================
 
 If a device does not have _DSD or the driver does not create ACPI GPIO
 mapping, the Linux GPIO framework refuses to return any GPIOs. This is
 because the driver does not know what it actually gets. For example if we
-have a device like below:
+have a device like below::
 
   Device (BTH)
   {
@@ -177,7 +184,7 @@ have a device like below:
       })
   }
 
-The driver might expect to get the right GPIO when it does:
+The driver might expect to get the right GPIO when it does::
 
   desc = gpiod_get(dev, "reset", GPIOD_OUT_LOW);
 
@@ -193,20 +200,23 @@ the ACPI GPIO mapping tables are hardly linked to ACPI ID and certain
 objects, as listed in the above chapter, of the device in question.
 
 Getting GPIO descriptor
------------------------
+=======================
+
+There are two main approaches to get GPIO resource from ACPI::
 
-There are two main approaches to get GPIO resource from ACPI:
   desc = gpiod_get(dev, connection_id, flags);
   desc = gpiod_get_index(dev, connection_id, index, flags);
 
 We may consider two different cases here, i.e. when connection ID is
 provided and otherwise.
 
-Case 1:
+Case 1::
+
   desc = gpiod_get(dev, "non-null-connection-id", flags);
   desc = gpiod_get_index(dev, "non-null-connection-id", index, flags);
 
-Case 2:
+Case 2::
+
   desc = gpiod_get(dev, NULL, flags);
   desc = gpiod_get_index(dev, NULL, index, flags);
 

Documentation/firmware-guide/acpi/index.rst

@@ -11,3 +11,4 @@ ACPI Support
    enumeration
    osi
    DSD-properties-rules
+   gpio-properties

MAINTAINERS

@@ -6593,7 +6593,7 @@ M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 L:	linux-gpio@vger.kernel.org
 L:	linux-acpi@vger.kernel.org
 S:	Maintained
-F:	Documentation/acpi/gpio-properties.txt
+F:	Documentation/firmware-guide/acpi/gpio-properties.rst
 F:	drivers/gpio/gpiolib-acpi.c
 
 GPIO IR Transmitter