Commit graph

2658 commits

Author SHA1 Message Date
Thomas Gleixner
c6257a28eb init: Remove check_bugs() leftovers
commit 61235b24b9 upstream

Everything is converted over to arch_cpu_finalize_init(). Remove the
check_bugs() leftovers including the empty stubs in asm-generic, alpha,
parisc, powerpc and xtensa.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20230613224545.553215951@linutronix.de
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-20 16:01:28 +08:00
Ben Hutchings
d207368fec parisc: Delete redundant register definitions in <asm/assembly.h>
commit b5b2a02bca upstream.

We define sp and ipsw in <asm/asmregs.h> using ".reg", and when using
current binutils (snapshot 2.40.50.20230611) the definitions in
<asm/assembly.h> using "=" conflict with those:

arch/parisc/include/asm/assembly.h: Assembler messages:
arch/parisc/include/asm/assembly.h:93: Error: symbol `sp' is already defined
arch/parisc/include/asm/assembly.h:95: Error: symbol `ipsw' is already defined

Delete the duplicate definitions in <asm/assembly.h>.

Also delete the definition of gp, which isn't used anywhere.

Signed-off-by: Ben Hutchings <benh@debian.org>
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-20 15:24:11 +08:00
Helge Deller
0d6fbe2383 parisc: Improve cache flushing for PCXL in arch_sync_dma_for_cpu()
[ Upstream commit 59fa12646d ]

Add comment in arch_sync_dma_for_device() and handle the direction flag in
arch_sync_dma_for_cpu().

When receiving data from the device (DMA_FROM_DEVICE) unconditionally
purge the data cache in arch_sync_dma_for_cpu().

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-08-20 15:21:38 +08:00
Helge Deller
9dea01d1db parisc: Fix flush_dcache_page() for usage from irq context
commit 61e150fb31 upstream.

Since at least kernel 6.1, flush_dcache_page() is called with IRQs
disabled, e.g. from aio_complete().

But the current implementation for flush_dcache_page() on parisc
unintentionally re-enables IRQs, which may lead to deadlocks.

Fix it by using xa_lock_irqsave() and xa_unlock_irqrestore()
for the flush_dcache_mmap_*lock() macros instead.

Cc: linux-parisc@vger.kernel.org
Cc: stable@kernel.org # 5.18+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-06 18:43:19 +08:00
Helge Deller
fcdd84ad1b parisc: Allow to reboot machine after system halt
commit 2028315cf5 upstream.

In case a machine can't power-off itself on system shutdown,
allow the user to reboot it by pressing the RETURN key.

Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-06 18:43:18 +08:00
Helge Deller
3e05326db2 parisc: Handle kgdb breakpoints only in kernel context
commit 6888ff04e3 upstream.

The kernel kgdb break instructions should only be handled when running
in kernel context.

Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-06 18:43:18 +08:00
Guilherme G. Piccoli
84ad5e7aa6 parisc: Replace regular spinlock with spin_trylock on panic path
[ Upstream commit 829632dae8 ]

The panic notifiers' callbacks execute in an atomic context, with
interrupts/preemption disabled, and all CPUs not running the panic
function are off, so it's very dangerous to wait on a regular
spinlock, there's a risk of deadlock.

Refactor the panic notifier of parisc/power driver to make use
of spin_trylock - for that, we've added a second version of the
soft-power function. Also, some comments were reorganized and
trailing white spaces, useless header inclusion and blank lines
were removed.

Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jeroen Roovers <jer@xs4all.nl>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-06-06 18:39:34 +08:00
Helge Deller
254cd80986 parisc: Fix argument pointer in real64_call_asm()
commit 6e3220ba33 upstream.

Fix the argument pointer (ap) to point to real-mode memory
instead of virtual memory.

It's interesting that this issue hasn't shown up earlier, as this could
have happened with any 64-bit PDC ROM code.

I just noticed it because I suddenly faced a HPMC while trying to execute
the 64-bit STI ROM code of an Visualize-FXe graphics card for the STI
text console.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-06-06 18:37:30 +08:00
Samuel Holland
3cb96f03cf genirq: Add and use an irq_data_update_affinity helper
[ Upstream commit 073352e951 ]

Some architectures and irqchip drivers modify the cpumask returned by
irq_data_get_affinity_mask, usually by copying in to it. This is
problematic for uniprocessor configurations, where the affinity mask
should be constant, as it is known at compile time.

Add and use a setter for the affinity mask, following the pattern of
irq_data_update_effective_affinity. This allows the getter function to
return a const cpumask pointer.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Xen bits
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220701200056.46555-7-samuel@sholland.org
Stable-dep-of: feabecaff5 ("genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-19 18:00:31 +08:00
Helge Deller
87733c9cce parisc: Wire up PTRACE_GETREGS/PTRACE_SETREGS for compat case
commit 316f1f42b5 upstream.

Wire up the missing ptrace requests PTRACE_GETREGS, PTRACE_SETREGS,
PTRACE_GETFPREGS and PTRACE_SETFPREGS when running 32-bit applications
on 64-bit kernels.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:59:15 +08:00
Helge Deller
02a3683c92 parisc: Fix return code of pdc_iodc_print()
commit 5d1335dabb upstream.

There is an off-by-one if the printed string includes a new-line
char.

Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:59:15 +08:00
Eric W. Biederman
403e197cea exit: Add and use make_task_dead.
commit 0e25498f8c upstream.

There are two big uses of do_exit.  The first is it's design use to be
the guts of the exit(2) system call.  The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.

Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure.  In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.

Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.

As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-19 17:59:00 +08:00
Helge Deller
1877593554 parisc: Align parisc MADV_XXX constants with all other architectures
commit 71bdea6f79 upstream.

Adjust some MADV_XXX constants to be in sync what their values are on
all other platforms. There is currently no reason to have an own
numbering on parisc, but it requires workarounds in many userspace
sources (e.g. glibc, qemu, ...) - which are often forgotten and thus
introduce bugs and different behaviour on parisc.

A wrapper avoids an ABI breakage for existing userspace applications by
translating any old values to the new ones, so this change allows us to
move over all programs to the new ABI over time.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:58:31 +08:00
Helge Deller
e5e3d34284 parisc: Avoid printing the hardware path twice
commit 2b6ae0962b upstream.

Avoid that the hardware path is shown twice in the kernel log, and clean
up the output of the version numbers to show up in the same order as
they are listed in the hardware database in the hardware.c file.
Additionally, optimize the memory footprint of the hardware database
and mark some code as init code.

Fixes: cab56b51ec ("parisc: Fix device names in /proc/iomem")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:56:04 +08:00
Helge Deller
3b200a869b parisc: Allow CONFIG_64BIT with ARCH=parisc
commit 805ce86149 upstream.

The previous patch triggered a build failure for the debian kernel,
which has CONFIG_64BIT enabled, uses the CROSS_COMPILER environment
variable and uses ARCH=parisc to configure the kernel for 64-bit
support.

This patch weakens the previous patch while keeping the recommended way
to configure the kernel with:
    ARCH=parisc     -> build 32-bit kernel
    ARCH=parisc64   -> build 64-bit kernel
while adding the possibility for debian to configure a 64-bit kernel
even if ARCH=parisc is set (PA8X00 CPU has to be selected and
CONFIG_64BIT needs to be enabled).

The downside of this patch is, that we now have a small window open
again where people may get it wrong: if they enable CONFIG_64BIT and try
to compile with a 32-bit compiler.

Fixes: 3dcfb729b5 ("parisc: Make CONFIG_64BIT available for ARCH=parisc64 only")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # 5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:53:55 +08:00
Helge Deller
9759a537d4 parisc: Add runtime check to prevent PA2.0 kernels on PA1.x machines
[ Upstream commit 591d2108f3 ]

If a 32-bit kernel was compiled for PA2.0 CPUs, it won't be able to run
on machines with PA1.x CPUs. Add a check and bail out early if a PA1.x
machine is detected.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-19 17:53:43 +08:00
Helge Deller
5d09232c9b Revert "parisc: Show error if wrong 32/64-bit compiler is being used"
[ Upstream commit b4b18f47f4 ]

This reverts commit b160628e9e.

There is no need any longer to have this sanity check, because the
previous commit ("parisc: Make CONFIG_64BIT available for ARCH=parisc64
only") prevents that CONFIG_64BIT is set if ARCH==parisc.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-19 17:53:42 +08:00
Helge Deller
48fbbe8d25 parisc: Fix exception handler for fldw and fstw instructions
commit 7ae1f5508d upstream.

The exception handler is broken for unaligned memory acceses with fldw
and fstw instructions, because it trashes or uses randomly some other
floating point register than the one specified in the instruction word
on loads and stores.

The instruction "fldw 0(addr),%fr22L" (and the other fldw/fstw
instructions) encode the target register (%fr22) in the rightmost 5 bits
of the instruction word. The 7th rightmost bit of the instruction word
defines if the left or right half of %fr22 should be used.

While processing unaligned address accesses, the FR3() define is used to
extract the offset into the local floating-point register set.  But the
calculation in FR3() was buggy, so that for example instead of %fr22,
register %fr12 [((22 * 2) & 0x1f) = 12] was used.

This bug has been since forever in the parisc kernel and I wonder why it
wasn't detected earlier. Interestingly I noticed this bug just because
the libime debian package failed to build on *native* hardware, while it
successfully built in qemu.

This patch corrects the bitshift and masking calculation in FR3().

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:53:17 +08:00
Helge Deller
068c10aed1 parisc: Make CONFIG_64BIT available for ARCH=parisc64 only
commit 3dcfb729b5 upstream.

With this patch the ARCH= parameter decides if the
CONFIG_64BIT option will be set or not. This means, the
ARCH= parameter will give:

	ARCH=parisc	-> 32-bit kernel
	ARCH=parisc64	-> 64-bit kernel

This simplifies the usage of the other config options like
randconfig, allmodconfig and allyesconfig a lot and produces
the output which is expected for parisc64 (64-bit) vs. parisc (32-bit).

Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org> # 5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:53:17 +08:00
Helge Deller
10afeac16d parisc: io_pgetevents_time64() needs compat syscall in 32-bit compat mode
commit 6431e92fc8 upstream.

For all syscalls in 32-bit compat mode on 64-bit kernels the upper
32-bits of the 64-bit registers are zeroed out, so a negative 32-bit
signed value will show up as positive 64-bit signed value.

This behaviour breaks the io_pgetevents_time64() syscall which expects
signed 64-bit values for the "min_nr" and "nr" parameters.
Fix this by switching to the compat_sys_io_pgetevents_time64() syscall,
which uses "compat_long_t" types for those parameters.

Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:52:01 +08:00
Helge Deller
3d4c8c5ebd parisc: Drop pa_swapper_pg_lock spinlock
commit 3fbc9a7de0 upstream.

This spinlock was dropped with commit b7795074a0 ("parisc: Optimize
per-pagetable spinlocks") in kernel v5.12.

Remove it to silence a sparse warning.

Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:52:01 +08:00
Helge Deller
4f80377a42 parisc: Fix device names in /proc/iomem
commit cab56b51ec upstream.

Fix the output of /proc/iomem to show the real hardware device name
including the pa_pathname, e.g. "Merlin 160 Core Centronics [8:16:0]".
Up to now only the pa_pathname ("[8:16.0]") was shown.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:52:01 +08:00
Helge Deller
9c1b71b3c2 parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
commit 0a1355db36 upstream.

Fix a boot crash on a c8000 machine as reported by Dave.  Basically it changes
patch_map() to return an alias mapping to the to-be-patched code in order to
prevent writing to write-protected memory.

Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org   # v5.2+
Link: https://lore.kernel.org/all/e8ec39e8-25f8-e6b4-b7ed-4cb23efc756e@bell.net/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:50:46 +08:00
Helge Deller
65371b4dfc parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI
commit 1d0811b03e upstream.

Fix this build error noticed by the kernel test robot:

drivers/video/console/sticore.c:1132:5: error: redefinition of 'fb_is_primary_device'
 arch/parisc/include/asm/fb.h:18:19: note: previous definition of 'fb_is_primary_device'

Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org   # v5.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:50:46 +08:00
Helge Deller
2e4a218f51 parisc/stifb: Implement fb_is_primary_device()
commit cf936af790 upstream.

Implement fb_is_primary_device() function, so that fbcon detects if this
framebuffer belongs to the default graphics card which was used to start
the system.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org   # v5.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:49:18 +08:00
Jason A. Donenfeld
38f85770f4 parisc: define get_cycles macro for arch-override
commit 8865bbe6ba upstream.

PA-RISC defines a get_cycles() function, but it does not do the usual
`#define get_cycles get_cycles` dance, making it impossible for generic
code to see if an arch-specific function was defined. While the
get_cycles() ifdef is not currently used, the following timekeeping
patch in this series will depend on the macro existing (or not existing)
when defining random_get_entropy().

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:49:10 +08:00
Helge Deller
972303752b Revert "parisc: Mark sched_clock unstable only if clocks are not syncronized"
commit 7962c08964 upstream.

This reverts commit d97180ad68.

It triggers RCU stalls at boot with a 32-bit kernel.

Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:48:40 +08:00
Helge Deller
42a6f4abd2 parisc: Merge model and model name into one line in /proc/cpuinfo
commit 5b89966bc9 upstream.

The Linux tool "lscpu" shows the double amount of CPUs if we have
"model" and "model name" in two different lines in /proc/cpuinfo.
This change combines the model and the model name into one line.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:48:33 +08:00
John David Anglin
2a3e8de3b7 parisc: Fix patch code locking and flushing
[ Upstream commit a9fe7fa7d8 ]

This change fixes the following:

1) The flags variable is not initialized. Always use raw_spin_lock_irqsave
and raw_spin_unlock_irqrestore to serialize patching.

2) flush_kernel_vmap_range is primarily intended for DMA flushes. Since
__patch_text_multiple is often called with interrupts disabled, it is
better to directly call flush_kernel_dcache_range_asm and
flush_kernel_icache_range_asm. This avoids an extra call.

3) The final call to flush_icache_range is unnecessary.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-19 17:47:43 +08:00
John David Anglin
58ed43689a parisc: Fix handling off probe non-access faults
[ Upstream commit e00b0a2ab8 ]

Currently, the parisc kernel does not fully support non-access TLB
fault handling for probe instructions. In the fast path, we set the
target register to zero if it is not a shadowed register. The slow
path is not implemented, so we call do_page_fault. The architecture
indicates that non-access faults should not cause a page fault from
disk.

This change adds to code to provide non-access fault support for
probe instructions. It also modifies the handling of faults on
userspace so that if the address lies in a valid VMA and the access
type matches that for the VMA, the probe target register is set to
one. Otherwise, the target register is set to zero.

This was done to make probe instructions more useful for userspace.
Probe instructions are not very useful if they set the target register
to zero whenever a page is not present in memory. Nominally, the
purpose of the probe instruction is determine whether read or write
access to a given address is allowed.

This fixes a problem in function pointer comparison noticed in the
glibc testsuite (stdio-common/tst-vfprintf-user-type). The same
problem is likely in glibc (_dl_lookup_address).

V2 adds flush and lpa instruction support to handle_nadtlb_fault.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-19 17:47:17 +08:00
Helge Deller
c4efe6e89e parisc/unaligned: Fix ldw() and stw() unalignment handlers
commit a972798368 upstream.

Fix 3 bugs:

a) emulate_stw() doesn't return the error code value, so faulting
instructions are not reported and aborted.

b) Tell emulate_ldw() to handle fldw_l as floating point instruction

c) Tell emulate_ldw() to handle ldw_m as integer instruction

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:45:37 +08:00
Helge Deller
994c464cfe parisc/unaligned: Fix fldd and fstd unaligned handlers on 32-bit kernel
commit dd2288f4a0 upstream.

Usually the kernel provides fixup routines to emulate the fldd and fstd
floating-point instructions if they load or store 8-byte from/to a not
natuarally aligned memory location.

On a 32-bit kernel I noticed that those unaligned handlers didn't worked and
instead the application got a SEGV.
While checking the code I found two problems:

First, the OPCODE_FLDD_L and OPCODE_FSTD_L cases were ifdef'ed out by the
CONFIG_PA20 option, and as such those weren't built on a pure 32-bit kernel.
This is now fixed by moving the CONFIG_PA20 #ifdef to prevent the compilation
of OPCODE_LDD_L and OPCODE_FSTD_L only, and handling the fldd and fstd
instructions.

The second problem are two bugs in the 32-bit inline assembly code, where the
wrong registers where used. The calculation of the natural alignment used %2
(vall) instead of %3 (ior), and the first word was stored back to address %1
(valh) instead of %3 (ior).

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:45:37 +08:00
Andy Shevchenko
7bcbe43c7d parisc: Add ioread64_lo_hi() and iowrite64_lo_hi()
commit 18a1d5e194 upstream.

It's a followup to the previous commit f15309d7ad ("parisc: Add
ioread64_hi_lo() and iowrite64_hi_lo()") which does only half of
the job. Add the rest, so we won't get a new kernel test robot
reports.

Fixes: f15309d7ad ("parisc: Add ioread64_hi_lo() and iowrite64_hi_lo()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:45:24 +08:00
John David Anglin
f431d19793 parisc: Drop __init from map_pages declaration
commit 9129886b88 upstream.

With huge kernel pages, we randomly eat a SPARC in map_pages(). This
is fixed by dropping __init from the declaration.

However, map_pages references the __init routine memblock_alloc_try_nid
via memblock_alloc.  Thus, it needs to be marked with __ref.

memblock_alloc is only called before the kernel text is set to readonly.

The __ref on free_initmem is no longer needed.

Comment regarding map_pages being in the init section is removed.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:45:23 +08:00
Helge Deller
4ddc7cc03b parisc: Show error if wrong 32/64-bit compiler is being used
commit b160628e9e upstream.

It happens quite often that people use the wrong compiler to build the
kernel:

make ARCH=parisc   -> builds the 32-bit kernel
make ARCH=parisc64 -> builds the 64-bit kernel

This patch adds a sanity check which errors out with an instruction how
use the correct ARCH= option.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:45:23 +08:00
John David Anglin
ace2b53f9f parisc: Fix lpa and lpa_user defines
commit db19c6f1a2 upstream.

While working on the rewrite to the light-weight syscall and futex code, I
experimented with using a hash index based on the user physical address of
atomic variable. This exposed two problems with the lpa and lpa_user defines.

Because of the copy instruction, the pa argument needs to be an early clobber
argument. This prevents gcc from allocating the va and pa arguments to the same
register.

Secondly, the lpa instruction can cause a page fault so we need to catch
exceptions.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Fixes: 116d753308 ("parisc: Use lpa instruction to load physical addresses in driver code")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:44:34 +08:00
John David Anglin
e5f4964eab parisc: Avoid calling faulthandler_disabled() twice
[ Upstream commit 9e9d4b460f ]

In handle_interruption(), we call faulthandler_disabled() to check whether the
fault handler is not disabled. If the fault handler is disabled, we immediately
call do_page_fault(). It then calls faulthandler_disabled(). If disabled,
do_page_fault() attempts to fixup the exception by jumping to no_context:

no_context:

        if (!user_mode(regs) && fixup_exception(regs)) {
                return;
        }

        parisc_terminate("Bad Address (null pointer deref?)", regs, code, address);

Apart from the error messages, the two blocks of code perform the same
function.

We can avoid two calls to faulthandler_disabled() by a simple revision
to the code in handle_interruption().

Note: I didn't try to fix the formatting of this code block.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-19 17:44:28 +08:00
Helge Deller
b1ed59193b parisc: Clear stale IIR value on instruction access rights trap
[ Upstream commit 484730e586 ]

When a trap 7 (Instruction access rights) occurs, this means the CPU
couldn't execute an instruction due to missing execute permissions on
the memory region.  In this case it seems the CPU didn't even fetched
the instruction from memory and thus did not store it in the cr19 (IIR)
register before calling the trap handler. So, the trap handler will find
some random old stale value in cr19.

This patch simply overwrites the stale IIR value with a constant magic
"bad food" value (0xbaadf00d), in the hope people don't start to try to
understand the various random IIR values in trap 7 dumps.

Noticed-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-19 17:43:29 +08:00
John David Anglin
2944c65719 parisc: Fix mask used to select futex spinlock
commit d3a5a68cff upstream.

The address bits used to select the futex spinlock need to match those used in
the LWS code in syscall.S. The mask 0x3f8 only selects 7 bits.  It should
select 8 bits.

This change fixes the glibc nptl/tst-cond24 and nptl/tst-cond25 tests.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Fixes: 53a42b6324 ("parisc: Switch to more fine grained lws locks")
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:43:25 +08:00
John David Anglin
9347e20ef5 parisc: Correct completer in lws start
commit 8f66fce0f4 upstream.

The completer in the "or,ev %r1,%r30,%r30" instruction is reversed, so we are
not clipping the LWS number when we are called from a 32-bit process (W=0).
We need to nulify the following depdi instruction when the least-significant
bit of %r30 is 1.

If the %r20 register is not clipped, a user process could perform a LWS call
that would branch to an undefined location in the kernel and potentially crash
the machine.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:43:25 +08:00
Helge Deller
87beab404e parisc: Mark cr16 CPU clocksource unstable on all SMP machines
commit afdb4a5b1d upstream.

In commit c8c3735997 ("parisc: Enhance detection of synchronous cr16
clocksources") I assumed that CPUs on the same physical core are syncronous.
While booting up the kernel on two different C8000 machines, one with a
dual-core PA8800 and one with a dual-core PA8900 CPU, this turned out to be
wrong. The symptom was that I saw a jump in the internal clocks printed to the
syslog and strange overall behaviour.  On machines which have 4 cores (2
dual-cores) the problem isn't visible, because the current logic already marked
the cr16 clocksource unstable in this case.

This patch now marks the cr16 interval timers unstable if we have more than one
CPU in the system, and it fixes this issue.

Fixes: c8c3735997 ("parisc: Enhance detection of synchronous cr16 clocksources")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:42:49 +08:00
Helge Deller
4548848982 parisc: Fix "make install" on newer debian releases
commit 0f9fee4cde upstream.

On newer debian releases the debian-provided "installkernel" script is
installed in /usr/sbin. Fix the kernel install.sh script to look for the
script in this directory as well.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v3.13+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:42:49 +08:00
Helge Deller
c11d71191b parisc: Fix KBUILD_IMAGE for self-extracting kernel
commit 1d7c29b777 upstream.

Default KBUILD_IMAGE to $(boot)/bzImage if a self-extracting
(CONFIG_PARISC_SELF_EXTRACT=y) kernel is to be built.
This fixes the bindeb-pkg make target.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:42:49 +08:00
Helge Deller
aeebdc8d8f Revert "parisc: Fix backtrace to always include init funtion names"
commit 98400ad75e upstream.

This reverts commit 279917e27e.

With the CONFIG_HARDENED_USERCOPY option enabled, this patch triggers
kernel bugs at runtime:

  usercopy: Kernel memory overwrite attempt detected to kernel text (offset 2084839, size 6)!
  kernel BUG at mm/usercopy.c:99!
 Backtrace:
  IAOQ[0]: usercopy_abort+0xc4/0xe8
  [<00000000406ed1c8>] __check_object_size+0x174/0x238
  [<00000000407086d4>] copy_strings.isra.0+0x3e8/0x708
  [<0000000040709a20>] do_execveat_common.isra.0+0x1bc/0x328
  [<000000004070b760>] compat_sys_execve+0x7c/0xb8
  [<0000000040303eb8>] syscall_exit+0x0/0x14

The problem is, that we have an init section of at least 2MB size which
starts at _stext and is freed after bootup.

If then later some kernel data is (temporarily) stored in this free
memory, check_kernel_text_object() will trigger a bug since the data
appears to be inside the kernel text (>=_stext) area:
        if (overlaps(ptr, len, _stext, _etext))
                usercopy_abort("kernel text");

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@kernel.org # 5.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:42:25 +08:00
Helge Deller
ef509f5475 Revert "parisc: Reduce sigreturn trampoline to 3 instructions"
commit 79df39d535 upstream.

This reverts commit e4f2006f12.

This patch shows problems with signal handling. Revert it for now.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.15
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 17:42:17 +08:00
Sven Schnelle
92239d6a04 parisc/entry: fix trace test in syscall exit path
commit 3ec18fc783 upstream.

commit 8779e05ba8 ("parisc: Fix ptrace check on syscall return")
fixed testing of TI_FLAGS. This uncovered a bug in the test mask.
syscall_restore_rfi is only used when the kernel needs to exit to
usespace with single or block stepping and the recovery counter
enabled. The test however used _TIF_SYSCALL_TRACE_MASK, which
includes a lot of bits that shouldn't be tested here.

Fix this by using TIF_SINGLESTEP and TIF_BLOCKSTEP directly.

I encountered this bug by enabling syscall tracepoints. Both in qemu and
on real hardware. As soon as i enabled the tracepoint (sys_exit_read,
but i guess it doesn't really matter which one), i got random page
faults in userspace almost immediately.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 16:58:05 +08:00
John David Anglin
651938e445 parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page
commit 38860b2c8b upstream.

For years, there have been random segmentation faults in userspace on
SMP PA-RISC machines.  It occurred to me that this might be a problem in
set_pte_at().  MIPS and some other architectures do cache flushes when
installing PTEs with the present bit set.

Here I have adapted the code in update_mmu_cache() to flush the kernel
mapping when the kernel flush is deferred, or when the kernel mapping
may alias with the user mapping.  This simplifies calls to
update_mmu_cache().

I also changed the barrier in set_pte() from a compiler barrier to a
full memory barrier.  I know this change is not sufficient to fix the
problem.  It might not be needed.

I have had a few days of operation with 5.14.16 to 5.15.1 and haven't
seen any random segmentation faults on rp3440 or c8000 so far.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@kernel.org # 5.12+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 16:57:53 +08:00
Helge Deller
29e91a4c2b parisc: Fix backtrace to always include init funtion names
commit 279917e27e upstream.

I noticed that sometimes at kernel startup the backtraces did not
included the function names of init functions. Their address were not
resolved to function names and instead only the address was printed.

Debugging shows that the culprit is is_ksym_addr() which is called
by the backtrace functions to check if an address belongs to a function in
the kernel. The problem occurs only for CONFIG_KALLSYMS_ALL=y.

When looking at is_ksym_addr() one can see that for CONFIG_KALLSYMS_ALL=y
the function only tries to resolve the address via is_kernel() function,
which checks like this:
	if (addr >= _stext && addr <= _end)
                return 1;
On parisc the init functions are located before _stext, so this check fails.
Other platforms seem to have all functions (including init functions)
behind _stext.

The following patch moves the _stext symbol at the beginning of the
kernel and thus includes the init section. This fixes the check and does
not seem to have any negative side effects on where the kernel mapping
happens in the map_pages() function in arch/parisc/mm/init.c.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@kernel.org # 5.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-19 16:57:52 +08:00
Sven Schnelle
f4b1026f8c parisc/kgdb: add kgdb_roundup() to make kgdb work with idle polling
[ Upstream commit 66e29fcda1 ]

With idle polling, IPIs are not sent when a CPU idle, but queued
and run later from do_idle(). The default kgdb_call_nmi_hook()
implementation gets the pointer to struct pt_regs from get_irq_reqs(),
which doesn't work in that case because it was not called from the
IPI interrupt handler. Fix it by defining our own kgdb_roundup()
function which sents an IPI_ENTER_KGDB. When that IPI is received
on the target CPU kgdb_nmicallback() is called.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-19 16:57:15 +08:00
Sven Schnelle
3a238b1560 parisc/unwind: fix unwinder when CONFIG_64BIT is enabled
[ Upstream commit 8e0ba125c2 ]

With 64 bit kernels unwind_special() is not working because
it compares the pc to the address of the function descriptor.
Add a helper function that compares pc with the dereferenced
address. This fixes all of the backtraces on my c8000. Without
this changes, a lot of backtraces are missing in kdb or the
show-all-tasks command from /proc/sysrq-trigger.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-04-19 16:57:15 +08:00