In order to save power, we only need to request a channel
when the communication with the DSP active.
For this we export the following functions:
- imx_dsp_request_channel, gets a channel with a given index
- imx_dsp_free_channel, frees a channel with a given index
Notice that we still request channels at probe to support devices
that do not have PM callbacks implemented.
More explanations about why requesting a channel has an effect
on power savings:
- requesting an mailbox channel will call mailbox's startup
function.
- startup function calls pm_runtime_get_sync which increments device
usage count and will keep the device active. Specifically, mailbox
clock will be always ON when a mailbox channel is requested.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
add dummy functions to avoid build failure when header files
are included, but drivers are not built.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX SCU soc driver depends on SCU firmware driver, so it has to
use platform driver model for proper defer probe operation, since
it has no device binding in DT file, a simple platform device is
created together inside the platform driver. To make it more clean,
we can just move the entire SCU soc driver into imx firmware folder
and initialized by i.MX SCU firmware driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add resource management API, when we have multiple
partition running together, resources not owned to current
partition should not be used.
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8 SoCs DTS file needs system control macro definitions, so move them
into dt-binding headfile, then include/linux/firmware/imx/types.h can be
removed and those drivers using it should be changed accordingly.
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is not used by linux and not supported as part of imx SCU api, it
was added by mistake.
The constant value "9" has since been reassigned in firmware to a
different service.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some of i.MX8 processors (e.g i.MX8QM, i.MX8QXP) contain
the Tensilica HiFi4 DSP for advanced pre- and post-audio
processing.
The communication between Host CPU and DSP firmware is
taking place using a shared memory area for message passing
and a dedicated Messaging Unit for notifications.
DSP IPC protocol offers a doorbell interface using
imx-mailbox API.
We use 4 MU channels (2 x TXDB, 2 x RXDB) to implement a
request-reply protocol.
Connection 0 (txdb0, rxdb0):
- Host writes messasge to shared memory [SHMEM]
- Host sends a request [MU]
- DSP handles request [SHMEM]
- DSP sends reply [MU]
Connection 1 (txdb1, rxdb1):
- DSP writes a message to shared memory [SHMEM]
- DSP sends a request [MU]
- Host handles request [SHMEM]
- Host sends reply [MU]
The protocol interface will be used by a Host client to
communicate with the DSP. First client will be the i.MX8
part from Sound Open Firmware infrastructure.
The protocol offers the following interface:
On Tx:
- imx_dsp_ring_doorbell, will be called to notify the DSP
that it needs to handle a request.
On Rx:
- clients need to provide two callbacks:
.handle_reply
.handle_request
- the callbacks will be used by the protocol on
notification arrival from DSP.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The System Controller Firmware (SCFW) controls RTC, thermal
and WDOG etc., these resources' interrupt function are managed
by SCU. When any IRQ pending, SCU will notify Linux via MU general
interrupt channel #3, and Linux kernel needs to call SCU APIs
to get IRQ status and notify each module to handle the interrupt.
Since there is no data transmission for SCU IRQ notification, so
doorbell mode is used for this MU channel, and SCU driver will
use notifier mechanism to broadcast to every module which registers
the SCU block notifier.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is done via RPC call to SCU.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add SCU PM SVC related protocol definitions which will be used by
a number of PM functions like Power Domain, Clock, Reset and etc.
The detailed implementation of each function will put in the individual
function drivers.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We already export resource id in dt-bindings headfile which can also
be used by drivers. So no need keep the same definitions in regular
headfile anymore.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The System Controller Firmware (SCFW) is a low-level system function
which runs on a dedicated Cortex-M core to provide power, clock, and
resource management. It exists on some i.MX8 processors. e.g. i.MX8QM
(QM, QP), and i.MX8QX (QXP, DX).
This patch implements the SCU firmware IPC function and the common
message sending API sc_call_rpc.
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
