An spi_driver does not need to set an owner, it will be populated by the
driver core.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a 24c08 chip connected to i2c bus on Intel Galileo Gen2 board. Enable
it via ACPI ID INT3499.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The change fixes a warning found by sparse:
drivers/misc/sram.c:134:20: warning: incorrect type in assignment (different address spaces)
drivers/misc/sram.c:134:20: expected void *base
drivers/misc/sram.c:134:20: got void [noderef] <asn:2>*
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This change adds functionality to operate on reserved SRAM partitions
described in device tree file. Two partition properties are added,
"pool" and "export", the first one allows to share a specific partition
for usage by a kernel consumer in the same manner as it is done for
the whole SRAM device, and "export" property provides access to some
SRAM area from userspace over sysfs interface. Practically it is
possible to specify both properties for an SRAM partition, however
simultaneous access from a kernel consumer and from userspace is not
serialized, but still the combination may be useful for debugging
purpose.
The change opens the following scenarios of SRAM usage:
* updates in a particular SRAM area specified by offset and size are
done by bootloader, then this information is utilized by the kernel,
* a particular SRAM area is rw accessed from userspace, the stored
data is persistent on soft reboots,
* a device driver secures SRAM area for its purposes,
* etc.
Note, strictly speaking the added optional properties describe policy
of SRAM usage, rather than hardware, but here the policy mostly
resembles flash partitions in devicetree, which is undoubtedly
a very popular option but it does not describe hardware.
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We should be returning -ENOMEM here instead of success.
Fixes: ba612aa8b4 ('misc: mic: SCIF memory registration and unregistration')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The caller expects that we take this lock again before returning
otherwise it you get double unlocks and races.
Fixes: ba612aa8b4 ('misc: mic: SCIF memory registration and unregistration')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Spotted by coccicheck:
drivers/misc/mei/amthif.c:479:5-26: WARNING: Comparison of bool to 0/1
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
s/send/receive/
The buffer in the receive function is
not used for sending
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KDoc function section start with double start: /** instead of /*
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Long messages are read in chunks, to prevent trashing runtime pm between
the reading of the chunks we call pm_runtime_mark_last_busy() on
non-final chunk message as the next chunk of the same message will be
received immediately in the next interrupt with high probablity.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In process of client devices removal from the bus there still
might be communication between a driver and the mei device
hence we need to cancel supporting workers only after all
the client devices were removed.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In scif_node_connect() we were returning if the initialization of p2p_ji
fails. But at that time p2p_ij has already been initialized and
resources allocated for it. And since p2p_ij is not added to the list
till now so we will have a leak.
Lets deinitialize and release the resources connected to p2p_ij.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Handle a failed device_register(), replace kfree() with put_device(),
which will call cosm/mbus/scif_release_dev().
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Re-enable CONFIG_SCSI_DH in our defconfigs
- Remove unused os_area_db_id_video_mode
- cxl: fix leak of IRQ names in cxl_free_afu_irqs() from Andrew
- cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API from Andrew
- cxl: fix leak of ctx->mapping when releasing kernel API contexts from Andrew
- cxl: Workaround malformed pcie packets on some cards from Philippe
- cxl: Fix number of allocated pages in SPA from Christophe Lombard
- Fix checkstop in native_hpte_clear() with lockdep from Cyril
- Panic on unhandled Machine Check on powernv from Daniel
- selftests/powerpc: Fix build failure of load_unaligned_zeropad test
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=3ze+
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Re-enable CONFIG_SCSI_DH in our defconfigs
- Remove unused os_area_db_id_video_mode
- cxl: fix leak of IRQ names in cxl_free_afu_irqs() from Andrew
- cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API from Andrew
- cxl: fix leak of ctx->mapping when releasing kernel API contexts from Andrew
- cxl: Workaround malformed pcie packets on some cards from Philippe
- cxl: Fix number of allocated pages in SPA from Christophe Lombard
- Fix checkstop in native_hpte_clear() with lockdep from Cyril
- Panic on unhandled Machine Check on powernv from Daniel
- selftests/powerpc: Fix build failure of load_unaligned_zeropad test
* tag 'powerpc-4.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix build failure of load_unaligned_zeropad test
powerpc/powernv: Panic on unhandled Machine Check
powerpc: Fix checkstop in native_hpte_clear() with lockdep
cxl: Fix number of allocated pages in SPA
cxl: Workaround malformed pcie packets on some cards
cxl: fix leak of ctx->mapping when releasing kernel API contexts
cxl: fix leak of ctx->irq_bitmap when releasing context via kernel API
cxl: fix leak of IRQ names in cxl_free_afu_irqs()
powerpc/ps3: Remove unused os_area_db_id_video_mode
powerpc/configs: Re-enable CONFIG_SCSI_DH
When adding a vPHB in cxl_pci_vphb_add(), we allocate a pci_controller
struct using pcibios_alloc_controller(). However, we don't free it in
cxl_pci_vphb_remove(), causing a leak.
Call pcibios_free_controller() in cxl_pci_vphb_remove() to free the vPHB
data structure correctly.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
- properly get the slow clock from timer-atmel-st, tcb_clksrc and pwm-atmel-tcb
- small fix in an error path for tcb_clksrc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UbC0
-----END PGP SIGNATURE-----
Merge tag 'at91-cleanup-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/drivers
Merge "First batch of cleanups for 4.4:" from Alexandre Belloni:
- properly get the slow clock from timer-atmel-st, tcb_clksrc and pwm-atmel-tcb
- small fix in an error path for tcb_clksrc
* tag 'at91-cleanup-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
misc: atmel_tclib: get and use slow clock
clocksource: tcb_clksrc: fix setup_clkevents error path
clocksource: atmel-st: get and use slow clock
The scheduled process area is currently allocated before assigning the
correct maximum processes to the AFU, which will mean we only ever
allocate a fixed number of pages for the scheduled process area. This
will limit us to 958 processes with 2 x 64K pages. If we try to use more
processes than that we'd probably overrun the buffer and corrupt memory
or crash.
AFUs that require three or more interrupts per process will not be
affected as they are already limited to less processes than that, but we
could hit it on an AFU that requires 0, 1 or 2 interrupts per process,
or when using 4K pages.
This patch moves the initialisation of the num_procs to before the SPA
allocation so that enough pages will be allocated for the number of
processes that the AFU supports.
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Cc: <stable@vger.kernel.org> # 3.18+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit dca1a4b5ff ("clk: at91: keep slow clk enabled to prevent system
hang") added a workaround for the slow clock as it is not properly handled
by its users.
Get and use the slow clock as it is necessary for the timer counters.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
This works around a pcie host bridge defect on some cards, that can cause
malformed Transaction Layer Packet (TLP) errors to be erroneously reported.
The upper nibble of the vendor section PSL revision is used to distinguish
between different cards. The affected ones have it set to 0.
Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
SCIF depends on IOVA which requires IOMMU_SUPPORT to be enabled.
The long term fix is to move IOVA from drivers/iommu to lib/
but this current patch should fix the reported issue.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get notified immediately when a balloon target is set, instead of waiting for
up to one second.
The up-to 1 second gap could be long enough to cause swapping inside of the
VM that receives the VM.
Acked-by: Andy King <acking@vmware.com>
Signed-off-by: Xavier Deguillard <xdeguillard@vmware.com>
Tested-by: Siva Sankar Reddy B <sankars@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unify the behavior of the first start of the balloon and a reset. Also on
unload, declare that the balloon driver does not have any capabilities
anymore.
Acked-by: Andy King <acking@vmware.com>
Signed-off-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2m ballooning significantly reduces the hypervisor side (and guest side)
overhead of ballooning and unballooning.
hypervisor only:
balloon unballoon
4 KB 2 GB/s 2.6 GB/s
2 MB 54 GB/s 767 GB/s
Use 2 MB pages as the hypervisor is alwys 64bit and 2 MB is the smallest
supported super-page size.
The code has to run on older versions of ESX and old balloon drivers run on
newer version of ESX. Hence match the capabilities with the host before 2m
page ballooning could be enabled.
Signed-off-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When VMware's hypervisor requests a VM to reclaim memory this is preferrably done
via ballooning. If the balloon driver does not return memory fast enough, more
drastic methods, such as hypervisor-level swapping are needed. These other methods
cause performance issues, e.g. hypervisor-level swapping requires the hypervisor to
swap in a page syncronously while the virtual CPU is blocked.
Hence it is in the interest of the VM to balloon memory as fast as possible. The
problem with doing this is that the VM might end up doing nothing else than
ballooning and the user might notice that the VM is stalled, esp. when the VM has
only a single virtual CPU.
This is less of a problem if the VM and the hypervisor perform balloon operations
faster. Also the balloon driver yields regularly, hence on a single virtual CPU
the Linux scheduler should be able to properly time-slice between ballooning and
other tasks.
Testing Done: quickly ballooned a lot of pages while wathing if there are any
perceived hickups (periods of non-responsiveness) in the execution of the
linux VM. No such hickups were seen.
Signed-off-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This helps with debugging vmw_balloon behavior, as it is clear what
functionality is enabled.
Acked-by: Andy King <acking@vmware.com>
Signed-off-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of waiting for the next GET_TARGET command, we can react faster
by exploiting the fact that each hypervisor call also returns the
balloon target.
Signed-off-by: Xavier Deguillard <xdeguillard@vmware.com>
Acked-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Philip P. Moltmann <moltmann@vmware.com>
Acked-by: Andy King <acking@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a new capability to the driver that allow sending 512 pages in
one hypervisor call. This reduce the cost of the driver when reclaiming
memory.
Signed-off-by: Xavier Deguillard <xdeguillard@vmware.com>
Acked-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Philip P. Moltmann <moltmann@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If kzalloc() fails then gms is NULL and we are returning NULL, but the
functions which called this function gru_register_mmu_notifier() are not
expecting NULL as the return. They are expecting either a valid pointer
or the error code in ERR_PTR.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Acked-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the function tfh_restart() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Acked-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To be future-proof and for better readability the time comparisons are
modified to use time_before() instead of plain, error-prone math.
Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de>
Acked-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the SCIF kernel node QP control messages required to
enable SCIF RMAs. Examples of such node QP control messages include
registration, unregistration, remote memory allocation requests,
remote memory unmap and SCIF remote fence requests.
The patch also updates the SCIF driver with minor changes required to
enable SCIF RMAs by adding the new files to the build, initializing
RMA specific information during SCIF endpoint creation, reserving SCIF
DMA channels, initializing SCIF RMA specific global data structures,
adding the IOCTL hooks required for SCIF RMAs and updating RMA
specific debugfs hooks.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch implements the fence APIs required to synchronize
DMAs. SCIF provides an interface to return a "mark" for all DMAs
programmed at the instant the API was called. Users can then "wait" on
the mark provided previously by blocking inside the kernel. Upon
receipt of a DMA completion interrupt the waiting thread is woken
up. There is also an interface to signal DMA completion by polling for
a location to be updated via a "signal" cookie to avoid the interrupt
overhead in the mark/wait interface. SCIF allows programming fences on
both the local and the remote node for both the mark/wait or the fence
signal APIs.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SCIF allows users to read from or write to registered remote memory
via CPU copies or DMA. The API verifies that both local and remote
windows are valid before initiating the CPU or DMA transfers. SCIF has
optimized algorithms for handling byte aligned as well as cache line
aligned DMA engines. A registration cache is maintained to avoid the
overhead of pinning pages repeatedly if buffers are reused. The
registration cache is invalidated upon receipt of MMU notifier
callbacks. SCIF windows are destroyed and the pages are unpinned only
once all prior DMAs initiated using that window are drained. Users can
request synchronous DMA operations as well as tail byte ordering if
required. CPU copies are always performed synchronously.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch implements the SCIF mmap/munmap interface. A similar
capability is provided to kernel clients via the
scif_get_pages()/scif_put_pages() APIs. The SCIF mmap interface
queries to check if a window is valid and then remaps the local
virtual address to the remote physical pages. These mappings are
subsequently destroyed upon receipt of the VMA close operation or
scif_get_pages(). This functionality allows SCIF users to directly
access remote memory without any driver interaction once the mappings
are created thereby providing bare-metal PCIe latency. These mappings
are zapped to avoid RMA accesses from user space, if a Coprocessor is
reset.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the implementation for operations performed on the
list of SCIF windows. Examples of such operations includes adding the
windows to the list of registered (or cached) windows, querying the
list of self or remote windows and unregistering windows. The query
operation is used by SCIF APIs which initiate DMAs, CPU copies or
fences to ensure that a window remains valid during a transfer.
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch implements the SCIF APIs required to pin and unpin
pages. SCIF registration locks down the pages. It then sends a remote
window allocation request to the peer. Once the peer has allocated
memory, the local SCIF endpoint copies the pinned page information to
the peer and notifies the peer once the copy has complete. The peer
upon receipt of the registration notification adds the new remote
window to its list. At this point the window page information is
available on both self and remote nodes so that they can start
performing SCIF DMAs, CPU copies and fences. The unregistration API
tears down the registration at both self and remote nodes.
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the internal data structures required to perform SCIF
RMAs. The data structures required to maintain per SCIF endpoint, RMA
information are contained in scif_endpt_rma_info. scif_pinned_pages
describes a set of SCIF pinned pages maintained locally. The
scif_window is a data structure which contains all the fields required
to describe a SCIF registered window on self and remote nodes. It
contains an offset which is used as a key to perform SCIF DMAs and CPU
copies between self and remote registered windows.
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch updates the MIC host daemon to work with corresponding
changes in COSM. Other MIC daemon fixes, cleanups and enhancements as
are also rolled into this patch. Changes to MIC sysfs ABI which go
into effect with this patch are also documented.
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since card side COSM functionality, to trigger MIC device shutdowns
and communicate shutdown status to the host, is now moved into a
separate COSM client driver, this patch removes this functionality
from the base MIC card driver. The mic_bus driver is also updated to
use the device index provided by COSM rather than maintain its own
device index.
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since COSM functionality is now moved into a separate COSM driver
drivers, this patch removes this functionality from the base MIC host
driver. The MIC host driver now implements cosm_hw_ops and registers a
COSM device which allows the COSM driver to trigger
boot/shutdown/reset of the MIC devices via the cosm_hw_ops.
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The COSM client driver running on the MIC cards is implemented as a
kernel mode SCIF client. It responds to a "shutdown" message from the
host by triggering a card shutdown and also communicates the shutdown
or reboot status back the host. It is also responsible for syncing the
card time to that of the host. Because SCIF messaging cannot be used
in a panic context, the COSM client driver also periodically sends a
heartbeat SCIF message to the host thereby enabling the host to detect
card crashes.
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The COSM driver communicates with the MIC cards over SCIF. A SCIF
"server" listens for incoming connections from "client" MIC cards as
they boot. After the connection is accepted a separate work item is
scheduled for each MIC card. This work item normally stays blocked in
scif_poll but wakes up to process messages from the card.
The SCIF connection between the host and card COSM components is used
to (a) send the command to shut down the card (b) receive shutdown
status back from the card upon completion of shutdown (c) receive
periodic heartbeat messages to detect card crashes (d) send host time
to the card to enable the card to sync its time to the host.
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The COSM driver allows boot, shutdown and reset of Intel MIC devices
via sysfs. This functionality was previously present in the Intel MIC
host driver but has now been taken out into a separate driver so that
it can be shared between multiple generations of Intel MIC products.
The sysfs kernel ABI used by the COSM driver is the same as that
defined originally for the MIC host driver in
Documentation/ABI/testing/sysfs-class-mic.txt.
The COSM driver also contains support for dumping the MIC card log_buf
and doing a "force reset" for the card via debugfs. The OSPM support
present in the MIC host driver has now largely been moved to user
space and only a small required OSPM functionality is now present in
the driver.
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MIC COSM bus allows the co-processor state management (COSM)
functionality to be shared between multiple generations of Intel MIC
products. The COSM driver registers itself on the COSM bus. The base
PCIe drivers implement the bus ops and register COSM devices on the
bus, resulting in the COSM driver being probed with the COSM devices.
COSM bus ops, e.g. start, stop, ready, reset, therefore abstract out
common functionality from its specific implementation for individual
generations of MIC products.
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
