The DPAA HW requires that at least 256 bytes from the start of the
first scatter-gather table entry are allocated and accessible. The
hardware reads the maximum size the table can have in one access,
thus requiring that the allocation and mapping to be done for the
maximum size of 256B even if there is a smaller number of entries
in the table.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The FMan hardware parser needs to be configured to remove the
short frame padding from the checksum calculation, otherwise
short UDP and TCP frames are likely to be marked as having a
bad checksum.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver performs the internal reload when it receives tx-timeout event from
the OS. Internal reload might fail in some scenarios e.g., fatal HW issues.
In such cases OS still see the link, which would result in undesirable
functionalities such as re-generation of tx-timeouts.
The patch addresses this issue by indicating the link-down to OS when
tx-timeout is detected, and keeping the link in down state till the
internal reload is successful.
Please consider applying it to 'net' branch.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Static checkers complain that id_tbl->table points to longs and 4 bytes
is smaller than sizeof(long). But the since other side is dividing by
32 instead of sizeof(long), that means the current code works fine.
Anyway, it's more conventional to use the BITS_TO_LONGS() macro when
we're allocating a bitmap.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code assumes that there is 4 bytes in a pointer and it doesn't
allocate enough memory.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fast Open key could be stored in different endian based on the CPU.
Previously hosts in different endianness in a server farm using
the same key config (sysctl value) would produce different cookies.
This patch fixes it by always storing it as little endian to keep
same API for LE hosts.
Reported-by: Daniele Iamartino <danielei@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two regression fixes, and a new syscall wire-up.
A fix for the recent conversion to time64_t in the powermac RTC routines, which
caused time to go backward.
Another fix for fallout from the split PMD PTL conversion.
Wire up the new io_pgetevents() syscall.
Thanks to:
Aneesh Kumar K.V, Arnd Bergmann, Breno Leitao, Mathieu Malaterre.
-----BEGIN PGP SIGNATURE-----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=kHJC
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Two regression fixes, and a new syscall wire-up:
- A fix for the recent conversion to time64_t in the powermac RTC
routines, which caused time to go backward.
- Another fix for fallout from the split PMD PTL conversion.
- Wire up the new io_pgetevents() syscall.
Thanks to: Aneesh Kumar K.V, Arnd Bergmann, Breno Leitao, Mathieu
Malaterre"
* tag 'powerpc-4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powermac: Fix rtc read/write functions
powerpc/mm/32: Fix pgtable_page_dtor call
powerpc: Wire up io_pgetevents
and fixes interrupt property for DA850 SoC GPIO as defined in
device-tree.
Both of these are not introduced with v4.18 merge but have
existed prior.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AENA
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
This fixes polarity of SD card write-protect pin on DA850 EVM
and fixes interrupt property for DA850 SoC GPIO as defined in
device-tree.
Both of these are not introduced with v4.18 merge but have
existed prior.
* tag 'davinci-fixes-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850: Fix interrups property for gpio
ARM: davinci: board-da850-evm: fix WP pin polarity for MMC/SD
Signed-off-by: Olof Johansson <olof@lixom.net>
- Added power capabilities for the mmc host controller on the
hikey and hikey960 boards to avoid broken wifi.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mr1l
-----END PGP SIGNATURE-----
Merge tag 'hisi-fixes-for-4.18' of git://github.com/hisilicon/linux-hisi into fixes
ARM64: hisi fixes for 4.18
- Added power capabilities for the mmc host controller on the
hikey and hikey960 boards to avoid broken wifi.
* tag 'hisi-fixes-for-4.18' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hikey960: Define wl1837 power capabilities
arm64: dts: hikey: Define wl1835 power capabilities
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull i2c fixes from Wolfram Sang:
- a revert because of bugzilla #200045 (and some documentation about
it)
- another regression fix in the i2c-gpio driver
- a leak fix for the i2c core
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: gpio: initialize SCL to HIGH again
i2c: smbus: kill memory leak on emulated and failed DMA SMBus xfers
i2c: algos: bit: mention our experience about initial states
Revert "i2c: algo-bit: init the bus to a known state"
Daniel Borkmann says:
====================
This set contains three fixes that are mostly JIT and set_memory_*()
related. The third in the series in particular fixes the syzkaller
bugs that were still pending; aside from local reproduction & testing,
also 'syz test' wasn't able to trigger them anymore. I've tested this
series on x86_64, arm64 and s390x, and kbuild bot wasn't yelling either
for the rest. For details, please see patches as usual, thanks!
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Partially undo commit 9facc33687 ("bpf: reject any prog that failed
read-only lock") since it caused a regression, that is, syzkaller was
able to manage to cause a panic via fault injection deep in set_memory_ro()
path by letting an allocation fail: In x86's __change_page_attr_set_clr()
it was able to change the attributes of the primary mapping but not in
the alias mapping via cpa_process_alias(), so the second, inner call
to the __change_page_attr() via __change_page_attr_set_clr() had to split
a larger page and failed in the alloc_pages() with the artifically triggered
allocation error which is then propagated down to the call site.
Thus, for set_memory_ro() this means that it returned with an error, but
from debugging a probe_kernel_write() revealed EFAULT on that memory since
the primary mapping succeeded to get changed. Therefore the subsequent
hdr->locked = 0 reset triggered the panic as it was performed on read-only
memory, so call-site assumptions were infact wrong to assume that it would
either succeed /or/ not succeed at all since there's no such rollback in
set_memory_*() calls from partial change of mappings, in other words, we're
left in a state that is "half done". A later undo via set_memory_rw() is
succeeding though due to matching permissions on that part (aka due to the
try_preserve_large_page() succeeding). While reproducing locally with
explicitly triggering this error, the initial splitting only happens on
rare occasions and in real world it would additionally need oom conditions,
but that said, it could partially fail. Therefore, it is definitely wrong
to bail out on set_memory_ro() error and reject the program with the
set_memory_*() semantics we have today. Shouldn't have gone the extra mile
since no other user in tree today infact checks for any set_memory_*()
errors, e.g. neither module_enable_ro() / module_disable_ro() for module
RO/NX handling which is mostly default these days nor kprobes core with
alloc_insn_page() / free_insn_page() as examples that could be invoked long
after bootup and original 314beb9bca ("x86: bpf_jit_comp: secure bpf jit
against spraying attacks") did neither when it got first introduced to BPF
so "improving" with bailing out was clearly not right when set_memory_*()
cannot handle it today.
Kees suggested that if set_memory_*() can fail, we should annotate it with
__must_check, and all callers need to deal with it gracefully given those
set_memory_*() markings aren't "advisory", but they're expected to actually
do what they say. This might be an option worth to move forward in future
but would at the same time require that set_memory_*() calls from supporting
archs are guaranteed to be "atomic" in that they provide rollback if part
of the range fails, once that happened, the transition from RW -> RO could
be made more robust that way, while subsequent RO -> RW transition /must/
continue guaranteeing to always succeed the undo part.
Reported-by: syzbot+a4eb8c7766952a1ca872@syzkaller.appspotmail.com
Reported-by: syzbot+d866d1925855328eac3b@syzkaller.appspotmail.com
Fixes: 9facc33687 ("bpf: reject any prog that failed read-only lock")
Cc: Laura Abbott <labbott@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If we would ever fail in the bpf_jit_prog() pass that writes the
actual insns to the image after we got header via bpf_jit_binary_alloc()
then we also need to make sure to free it through bpf_jit_binary_free()
again when bailing out. Given we had prior bpf_jit_prog() passes to
initially probe for clobbered registers, program size and to fill in
addrs arrray for jump targets, this is more of a theoretical one,
but at least make sure this doesn't break with future changes.
Fixes: 0546231057 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Any eBPF JIT that where its underlying arch supports ARCH_HAS_SET_MEMORY
would need to use bpf_jit_binary_{un,}lock_ro() pair instead of the
set_memory_{ro,rw}() pair directly as otherwise changes to the former
might break. arm32's eBPF conversion missed to change it, so fix this
up here.
Fixes: 39c13c204b ("arm: eBPF JIT compiler")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As suggested by Nick Piggin it seems we can drop the -ffunction-sections
compile flag, now that the kernel uses thin archives. Testing with 32-
and 64-bit kernel showed no difference in kernel size.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
This was introduced more than a decade ago when sg chaining was
added, but we never really caught anything with it. The scatterlist
entry size can be critical, since drivers allocate it, so remove
the magic member. Recently it's been triggering allocation stalls
and failures in NVMe.
Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Fix the initialization time error handling in the recently added
Kryo cpufreq driver (Dan Carpenter).
- Fix up the recently added coverage of performance states in the
generic power domains (genpd) framework (Viresh Kumar).
- Add missing documentation of the new hwp_dynamic_boost sysfs knob
in the intel_pstate driver (Rafael Wysocki).
- Fix incorrect sysfs path in the intel_pstate driver documentation
(Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=842O
-----END PGP SIGNATURE-----
Merge tag 'pm-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix up recently added features (the Kryo cpufreq driver and
performance states coverage in the generic power domains framework),
add missing documentation for a recently added sysfs knob in the
intel_pstate driver and fix an error in its documentation.
Specifics:
- Fix the initialization time error handling in the recently added
Kryo cpufreq driver (Dan Carpenter).
- Fix up the recently added coverage of performance states in the
generic power domains (genpd) framework (Viresh Kumar).
- Add missing documentation of the new hwp_dynamic_boost sysfs knob
in the intel_pstate driver (Rafael Wysocki).
- Fix incorrect sysfs path in the intel_pstate driver documentation
(Rafael Wysocki)"
* tag 'pm-4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Documentation: intel_pstate: Describe hwp_dynamic_boost sysfs knob
Documentation: admin-guide: intel_pstate: Fix sysfs path
PM / Domains: Rename opp_node to np
PM / Domains: Fix return value of of_genpd_opp_to_performance_state()
cpufreq: qcom-kryo: Fix error handling in probe()
-----BEGIN PGP SIGNATURE-----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=Em+E
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2018-06-29' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Nothing too major this round:
- small set of mali-dp fixes
- single meson fix
- a bunch of amdgpu fixes (one makes non-4k page sizes not be a bad
experience)"
* tag 'drm-fixes-2018-06-29' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: release spinlock before committing updates to stream
drm/amdgpu:Support new VCN FW version naming convention
drm/amdgpu: fix UBSAN: Undefined behaviour for amdgpu_fence.c
drm/meson: Fix an un-handled error path in 'meson_drv_bind_master()'
drm/amdgpu: GPU vs CPU page size fixes in amdgpu_vm_bo_split_mapping
drm/amdgpu: Count disabled CRTCs in commit tail earlier
drm/mali-dp: Rectify the width and height passed to rotmem_required()
drm/arm/malidp: Preserve LAYER_FORMAT contents when setting format
drm: mali-dp: Enable Global SE interrupts mask for DP500
drm/arm/malidp: Ensure that the crtcs are shutdown before removing any encoder/connector
bio_clone_bioset(). Also fixes splitting bio that has integrity
payload.
- Three fixes related to properly validating DAX capabilities of a
stacked DM device that will advertise DAX support.
- Update DM writecache target to use 2-factor allocator arguments. Kees
says this is the last related change for 4.18.
- Fix DM zoned target to use GFP_NOIO to avoid triggering reclaim during
IO submission (caught by lockdep).
- Fix DM thinp to gracefully recover from running out of data space
while a previous async discard completes (whereby freeing space).
- Fix DM thinp's metadata transaction commit to avoid needless work.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbNURXAAoJEMUj8QotnQNaPVYIAISzFYsSLEEYiGF5CDn2A07/
vd4TBIk7sAVQ/zouNGSNUHepoPJZR8E75SLO4lqZ214fyeYl9/48Za3dlyXeHldR
ziCCYFyHKvKgfZpBpbO43HbZbWvcVplIAt+GhhXepHy9jJC7+XQzMOqGwcvK2pW4
qCOqLTLaTGdzx5UaoLCG2Yg3E1TrYH0kZei/WLRBGW12WAsCzqNqUsZ5TgeilxCt
r/5ajPsXkcNjV9BrUNwY43J+WX8eKIuFKRSbnVdjHBEoVCeCwnP1R8WJnMm5/BTh
KZpyYTlFsBZ+Gvzojt2XI80ttviXtSUoJJNZgze9JT2xR4jMfn4yFQr/odxJucE=
=ZGTy
-----END PGP SIGNATURE-----
Merge tag 'for-4.18/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix dm core to use more efficient bio_split() instead of
bio_clone_bioset(). Also fixes splitting bio that has integrity
payload.
- Three fixes related to properly validating DAX capabilities of a
stacked DM device that will advertise DAX support.
- Update DM writecache target to use 2-factor allocator arguments. Kees
says this is the last related change for 4.18.
- Fix DM zoned target to use GFP_NOIO to avoid triggering reclaim
during IO submission (caught by lockdep).
- Fix DM thinp to gracefully recover from running out of data space
while a previous async discard completes (whereby freeing space).
- Fix DM thinp's metadata transaction commit to avoid needless work.
* tag 'for-4.18/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: prevent DAX mounts if not supported
dax: check for QUEUE_FLAG_DAX in bdev_dax_supported()
pmem: only set QUEUE_FLAG_DAX for fsdax mode
dm thin: handle running out of data space vs concurrent discard
dm raid: don't use 'const' in function return
dm zoned: avoid triggering reclaim from inside dmz_map()
dm writecache: use 2-factor allocator arguments
dm thin metadata: remove needless work from __commit_transaction
dm: use bio_split() when splitting out the already processed bio
Pull single NVMe fix from Christoph.
* 'nvme-4.18' of git://git.infradead.org/nvme:
nvme-rdma: fix possible double free of controller async event buffer
Fix the test that verifies whether bio_op(bio) represents a discard
or write zeroes operation. Compile-tested only.
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Fixes: 7435e9018f ("drbd: zero-out partial unaligned discards on local backend")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some devices have different queue limits depending on the type of IO. A
classic case is SATA NCQ, where some commands can queue, but others
cannot. If we have NCQ commands inflight and encounter a non-queueable
command, the driver returns busy. Currently we attempt to dispatch more
from the scheduler, if we were able to queue some commands. But for the
case where we ended up stopping due to BUSY, we should not attempt to
retrieve more from the scheduler. If we do, we can get into a situation
where we attempt to queue a non-queueable command, get BUSY, then
successfully retrieve more commands from that scheduler and queue those.
This can repeat forever, starving the non-queuable command indefinitely.
Fix this by NOT attempting to pull more commands from the scheduler, if
we get a BUSY return. This should also be more optimal in terms of
letting requests stay in the scheduler for as long as possible, if we
get a BUSY due to the regular out-of-tags condition.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_pgetevents() will not change the signal mask. Mark it const to make
it clear and to reduce the need for casts in user code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Avi Kivity <avi@scylladb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[hch: reapply the patch that got incorrectly reverted]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the kernel accounts the memory for network traffic through
mem_cgroup_[un]charge_skmem() interface. However the memory accounted
only includes the truesize of sk_buff which does not include the size of
sock objects. In our production environment, with opt-out kmem
accounting, the sock kmem caches (TCP[v6], UDP[v6], RAW[v6], UNIX) are
among the top most charged kmem caches and consume a significant amount
of memory which can not be left as system overhead. So, this patch
converts the kmem caches of all sock objects to SLAB_ACCOUNT.
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The limit_id_fallback array uses enum drm_ipp_size_id to index its
content. The content itself is of type enum drm_exynos_ipp_limit_type.
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The only bits that should be preserved in decon_win_set_fmt() is
WINCONx_ENWIN_F. All other bits depends on the selected pixel formats and
are set by the mentioned function.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Set per-plane global alpha to maximum value to get proper blending of
XRGB and ARGB planes. This fixes the strange order of overlapping planes.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DMA hardware should respect buffer pitch, so use the width calculated from
the buffer pitch instead of the virtual one.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fix following issues related to planar YUV pixel format configuration:
- NV16/61 modes were incorrectly programmed as NV12/21,
- YVU420 was programmed as YUV420 on source,
- YVU420 and YUV422 were programmed as YUV420 on output.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Horizontal (DRM_MODE_REFLECT_Y) and vertical (DMR_MODE_REFLECT_Y) flip
were swapped in GScaler driver. Fix this by swapping code for interpreting
them.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Investigation revealed that GScaler hardware requires the real buffer width
(pitch) to be aligned to 16 pixels.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
DMA hardware should respect buffer pitch, so use the width calculated from
the buffer pitch instead of the virtual one.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fix Cb/CR components order in two-planar YUV420, YUV422 and YUV444 modes.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Ensure that Scaler hardware is properly reset and interrupts are cleared
before processing next image.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Horizontal (DRM_MODE_REFLECT_Y) and vertical (DMR_MODE_REFLECT_Y) flip
were swapped in Rotator driver. Fix this by swapping code for interpreting
them.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Prepare a common function for size and scale checks and call it for
source and destination buffers. Then also move there the state-less checks
from exynos_drm_ipp_task_setup_buffer, so the format information is already
available in limits processing. Finally perform the IPP_LIMIT_BUFFER check
on the real width of the buffer (the width calculated from the provided
buffer pitch).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Merge fixups for the recent extenstion of the generic power domains
(genpd) framework covering performance states.
* pm-domains:
PM / Domains: Rename opp_node to np
PM / Domains: Fix return value of of_genpd_opp_to_performance_state()
At the very least we should check the return value if
nla_parse_nested() is called with a non-NULL policy.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 9757235f45, "nl80211: correct checks for
NL80211_MESHCONF_HT_OPMODE value") relaxed the range for the HT
operation field in meshconf, while also adding checks requiring
the non-greenfield and non-ht-sta bits to be set in certain
circumstances. The latter bit is actually reserved for mesh BSSes
according to Table 9-168 in 802.11-2016, so in fact it should not
be set.
wpa_supplicant sets these bits because the mesh and AP code share
the same implementation, but authsae does not. As a result, some
meshconf updates from authsae which set only the NONHT_MIXED
protection bits were being rejected.
In order to avoid breaking userspace by changing the rules again,
simply accept the values with or without the bits set, and mask
off the reserved bit to match the spec.
While in here, update the 802.11-2012 reference to 802.11-2016.
Fixes: 9757235f45 ("nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value")
Cc: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Bob Copeland <bobcopeland@fb.com>
Reviewed-by: Masashi Honma <masashi.honma@gmail.com>
Reviewed-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On pre-emption enabled kernels the following print was being seen due to
missing local_bh_disable/local_bh_enable calls. mac80211 assumes that
pre-emption is disabled in the data path.
BUG: using smp_processor_id() in preemptible [00000000] code: iwd/517
caller is __ieee80211_subif_start_xmit+0x144/0x210 [mac80211]
[...]
Call Trace:
dump_stack+0x5c/0x80
check_preemption_disabled.cold.0+0x46/0x51
__ieee80211_subif_start_xmit+0x144/0x210 [mac80211]
Fixes: 9118064914 ("mac80211: Add support for tx_control_port")
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
[commit message rewrite, fixes tag]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It seems that during the conversion from gpio* to gpiod*, the initial
state of SCL was wrongly switched to LOW. Fix it to be HIGH again.
Fixes: 7bb75029ef ("i2c: gpio: Enforce open drain through gpiolib")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
If DMA safe memory was allocated, but the subsequent I2C transfer
fails the memory is leaked. Plug this leak.
Fixes: 8a77821e74 ("i2c: smbus: use DMA safe buffers for emulated SMBus transactions")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
So, if somebody wants to re-implement this in the future, we pinpoint to
a problem case.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This reverts commit 3e5f06bed7. As per
bugzilla #200045, this caused a regression. I don't really see a way to
fix it without having the hardware. So, revert the patch and I will fix
the issue I was seeing originally in the i2c-gpio driver itself. I
couldn't find new users of this algorithm since, so there should be no
one depending on the new behaviour.
Reported-by: Sergey Larin <cerg2010cerg2010@mail.ru>
Fixes: 3e5f06bed7 ("i2c: algo-bit: init the bus to a known state")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Sergey Larin <cerg2010cerg2010@mail.ru>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
