SMC tries to make use of SMCD first. If a problem shows up,
it tries to switch to SMCR. If the SMCD initializing problem shows
up after the SMCD connection has already been initialized, field
rx_off keeps the wrong SMCD value for SMCR, which results in corrupted
data at the receiver.
This patch adds an explicit (re-)setting of field rx_off to zero if the
connection uses SMCR.
Fixes: be244f28d2 ("net/smc: add SMC-D support in data transfer")
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Older SMCR implementations had no link failover support and used one
link only. Because the handshake protocol requires to try the
establishment of a second link the old code sent a fake add_link message
and declined any server response afterwards.
The current code supports multiple links and inspects the received fake
add_link message more closely. To tolerate the fake add_link messages
smc_llc_is_local_add_link() needs an improved check of the message to
be able to separate between locally enqueued and fake add_link messages.
And smc_llc_cli_add_link() needs to check if the provided qp_mtu size is
invalid and reject the add_link request in that case.
Fixes: c48254fa48 ("net/smc: move add link processing for new device into llc layer")
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If tg3_reset_task() fails, the device state is left in an inconsistent
state with IFF_RUNNING still set but NAPI state not enabled. A
subsequent operation, such as ifdown or AER error can cause it to
soft lock up when it tries to disable NAPI state.
Fix it by bringing down the device to !IFF_RUNNING state when
tg3_reset_task() fails. tg3_reset_task() running from workqueue
will now call tg3_close() when the reset fails. We need to
modify tg3_reset_task_cancel() slightly to avoid tg3_close()
calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise
cancel_work_sync() will wait forever for tg3_reset_task() to
finish.
Reported-by: David Christensen <drc@linux.vnet.ibm.com>
Reported-by: Baptiste Covolato <baptiste@arista.com>
Fixes: db21997379 ("tg3: Schedule at most one tg3_reset_task run")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When validating kcore modules the do_validate_kcore_modules function
checks on every kernel module dso against modules record. The
__map__is_kmodule check is used to get only kernel module dso objects
through.
Currently the bpf images are slipping through the check and making the
validation to fail, so report falls back from kcore usage to kallsyms.
Adding __map__is_bpf_image check for bpf image and adding it to
__map__is_kmodule check.
Fixes: 3c29d4483e ("perf annotate: Add basic support for bpf_image")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200826213017.818788-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Event modifiers are not mentioned in the perf record or perf stat
manpages. Add them to orient new users more effectively by pointing
them to the perf list manpage for details.
Fixes: 2055fdaf87 ("perf list: Document precise event sampling for AMD IBS")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tony Jones <tonyj@suse.de>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200901215853.276234-1-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In case of error, the function perf_session__new() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR()
Committer notes:
This wasn't compiling due to an extraneous '{' not matched by a '}', fix
it.
Fixes: 13edc23720 ("perf bench: Add a multi-threaded synthesize benchmark")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200902140526.26916-1-yuehaibing@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print the name of the client rather than the number. This
makes it easier to debug what block is causing the fault.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It needs to load renoir_ta firmware because hdcp is enabled by default
for renoir now. This can avoid error:DTM TA is not initialized
Signed-off-by: Changfeng <Changfeng.Zhu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Calculate the correct value for max_entries or we might run after the
page_address array.
v2: Xinhui pointed out we don't need the shift
v3: use local copy of start and simplify some calculation
v4: fix the case that we map less VA range than BO size
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 1e691e2444 drm/amdgpu: stop allocating dummy GTT nodes
Reviewed-by: xinhui pan <xinhui.pan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The DRM device is a static member of
the amdgpu device structure and as such
always exists, so long as the PCI and
thus the amdgpu device exist.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable multi-ring ih1 and ih2 for Arcturus only.
For Navi10 family multi-ring has been disabled.
Apparently, having multi-ring enabled in Navi was causing
continus page fault interrupts.
Further investigation is needed to get to the root cause.
Related issue link:
https://gitlab.freedesktop.org/drm/amd/-/issues/1279
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When GPU is in reset, its status isn't stable and ring buffer also need
be reset when resuming. Therefore driver should protect GPU recovery
thread from ring buffer accessed by other threads. Otherwise GPU will
randomly hang during recovery.
v2: correct indent
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dennis Li <Dennis.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to read back from registers for manual mode rather than
using the metrics table.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1164
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Will be used to fetch the fan speeds when manual fan mode is
set.
v2: squash in a Coverity fix from Colin Ian King
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer needed as we can calculate it based on
the fan's max rpm.
v2: minor code rework
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer needed as we can calculate it based on
the fan's max rpm.
v2: rework code to avoid possible uninitialized
variable use.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On hardware with multiple uvd instances, dependent uvd jobs
may get scheduled to different uvd instances. Because uvd_enc
jobs retain hw context, dependent jobs should always run on the
same uvd instance. This patch disables GPU scheduler's load balancer
for a context that binds jobs from the same context to a uvd
instance.
v2: Squash in uvd_enc fix
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixed a compilation warning for casting to pointer from integer of
different size on 32-bit platforms.
Reported-by: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com>
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The new string should have enough space for the original string and the
back slashes IMHO.
Fixes: fbc2844e84 ("perf vendor events: Use more flexible pattern matching for CPU identification for mapfile.csv")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lore.kernel.org/lkml/20200903152510.489233-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To address these errors found when cross building from x86_64 to MIPS
little endian 32-bit:
CC /tmp/build/perf/util/parse-events-bison.o
util/parse-events.y: In function 'parse_events_parse':
util/parse-events.y:514:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
514 | (void *) $2, $6, $4);
| ^
util/parse-events.y:531:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
531 | (void *) $2, NULL, $4)) {
| ^
util/parse-events.y:547:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
547 | (void *) $2, $4, 0);
| ^
util/parse-events.y:564:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
564 | (void *) $2, NULL, 0)) {
| ^
Fixes: cabbf26821 ("perf parse: Before yyabort-ing free components")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the "single port" example code for configuring a DSA switch without
tagging support from userspace the command to bring up the "lan2" link
was typo'd.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some configurations of ia64 and microblaze use min_low_pfn and
max_low_pfn in pfn_valid(). This causes build failures for modules that
use pfn_valid().
The fix is to add EXPORT_SYMBOL() for these variables on ia64 and
microblaze.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAl9RAB8THHJwcHRAbGlu
dXguaWJtLmNvbQAKCRA5A4Ymyw79kaw9B/9icBkgDj/KQKnD5y5PgDis4AIHZ59d
X2pIKk43sXB2xBQmtBxRkTrxHbBkNLOc81BaJJjkkVXEqGbtiYHHVgDFrazwFNwZ
q480Ha8CP4mNyR3JZ/sI0npdqX/BQxLJPa5v6hAa+UZExFCbNnPpcam/GsJIw7T4
Gd9caXJ3WE6uPrxjkdo6kthihfOxgSXX1cLIyMkFDZdhGbsBipm60+JScgk3f/cX
77qggeJ/2f7HDSoBCsPcxqBxqdlQ6J5P5L2gNEN67GgSegNBs/GAs7xDbTx2XuFv
9vTwZ8bTatkgLtnch5yQR/ul01DmgPZJUBQPYlLd7y+dfB5AgTBvNkby
=oS5W
-----END PGP SIGNATURE-----
Merge tag 'fixes-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull misc build failure fixes from Mike Rapoport:
"Fix min_low_pfn/max_low_pfn build errors on ia64 and microblaze.
Some configurations of ia64 and microblaze use min_low_pfn and
max_low_pfn in pfn_valid(). This causes build failures for modules
that use pfn_valid().
The fix is to add EXPORT_SYMBOL() for these variables on ia64 and
microblaze"
* tag 'fixes-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
ia64: fix min_low_pfn/max_low_pfn build errors
microblaze: fix min_low_pfn/max_low_pfn build errors
-----BEGIN PGP SIGNATURE-----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=lVnf
-----END PGP SIGNATURE-----
Merge tag 'affs-for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull affs fix from David Sterba:
"One fix to make permissions work the same way as on AmigaOS"
* tag 'affs-for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
affs: fix basic permission bits to actually work
The realtime flag only applies to the data fork, so don't use the
realtime block number checks on the attr fork of a realtime file.
Fixes: 30b0984d91 ("xfs: refactor bmap record validation")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
-----BEGIN PGP SIGNATURE-----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=OwNa
-----END PGP SIGNATURE-----
Merge tag 'media/v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- a compilation fix issue with ti-vpe on arm 32 bits
- two Kconfig fixes for imx214 and max9286 drivers
- a kernel information leak at v4l2-core on time32 compat ioctls
- some fixes at rc core unbind logic
- a fix at mceusb driver for it to not use GFP_ATOMIC
- fixes at cedrus and vicodec drivers at the control handling logic
- a fix at gpio-ir-tx to avoid disabling interruts on a spinlock
* tag 'media/v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: mceusb: Avoid GFP_ATOMIC where it is not needed
media: gpio-ir-tx: spinlock is not needed to disable interrupts
media: rc: do not access device via sysfs after rc_unregister_device()
media: rc: uevent sysfs file races with rc_unregister_device()
media: max9286: Depend on OF_GPIO
media: i2c: imx214: select V4L2_FWNODE
media: cedrus: Add missing v4l2_ctrl_request_hdl_put()
media: vicodec: add missing v4l2_ctrl_request_hdl_put()
media: media/v4l2-core: Fix kernel-infoleak in video_put_user()
media: ti-vpe: cal: Fix compilation on 32-bit ARM
In commit 4f0b4352bd ("drm/i915: Extract cdclk requirements checking
to separate function") the order of force_min_cdclk_changed check and
intel_modeset_checks(), was reversed. This broke the mechanism to
immediately force a new CDCLK minimum, and lead to driver probe
errors for display audio on GLK platform with 5.9-rc1 kernel. Fix
the issue by moving intel_modeset_checks() call later.
[vsyrjala: It also broke the ability of planes to bump up the cdclk
and thus could lead to underruns when eg. flipping from 32bpp to
64bpp framebuffer. To be clear, we still compute the new cdclk
correctly but fail to actually program it to the hardware due to
intel_set_cdclk_{pre,post}_plane_update() not getting called on
account of state->modeset==false.]
Fixes: 4f0b4352bd ("drm/i915: Extract cdclk requirements checking to separate function")
BugLink: https://github.com/thesofproject/linux/issues/2410
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200901151036.1312357-1-kai.vehmanen@linux.intel.com
There've been quite a few regression reports about the lowered volume
(reduced to ca 65% from the previous level) on Lenovo Thinkpad X1
after the commit d2cd795c4e ("ALSA: hda - fixup for the bass speaker
on Lenovo Carbon X1 7th gen"). Although the commit itself does the
right thing from HD-audio POV in order to have a volume control for
bass speakers, it seems that the machine has some secret recipe under
the hood.
Through experiments, Benjamin Poirier found out that the following
routing gives the best result:
* DAC1 (NID 0x02) -> Speaker pin (NID 0x14)
* DAC2 (NID 0x03) -> Shared by both Bass Speaker pin (NID 0x17) &
Headphone pin (0x21)
* DAC3 (NID 0x06) -> Unused
DAC1 seems to have some equalizer internally applied, and you'd get
again the output in a bad quality if you connect this to the
headphone pin. Hence the headphone is connected to DAC2, which is now
shared with the bass speaker pin. DAC3 has no volume amp, hence it's
not connected at all.
For achieving the routing above, this patch introduced a couple of
workarounds:
* The connection list of bass speaker pin (NID 0x17) is reduced not to
include DAC3 (NID 0x06)
* Pass preferred_pairs array to specify the fixed connection
Here, both workarounds are needed because the generic parser prefers
the individual DAC assignment over others.
When the routing above is applied, the generic parser creates the two
volume controls "Front" and "Bass Speaker". Since we have only two
DACs for three output pins, those are not fully controlling each
output individually, and it would confuse PulseAudio. For avoiding
the pitfall, in this patch, we rename those volume controls to some
unique ones ("DAC1" and "DAC2"). Then PulseAudio ignore them and
concentrate only on the still good-working "Master" volume control.
If a user still wants to control each DAC volume, they can still
change manually via "DAC1" and "DAC2" volume controls.
Fixes: d2cd795c4e ("ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen")
Reported-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207407#c10
BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3214171
BugLink: https://gist.github.com/hamidzr/dd81e429dc86f4327ded7a2030e7d7d9#gistcomment-3276276
Link: https://lore/kernel.org/r/20200829112746.3118-1-benjamin.poirier@gmail.com
Link: https://lore.kernel.org/r/20200903083300.6333-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On RM400(a20r) machines ISA and SCSI interrupts share the same interrupt
line. Commit 49e6e07e3c ("MIPS: pass non-NULL dev_id on shared
request_irq()") accidently dropped the IRQF_SHARED bit, which breaks
registering SCSI interrupt. Put back IRQF_SHARED and add dev_id for
ISA interrupt.
Fixes: 49e6e07e3c ("MIPS: pass non-NULL dev_id on shared request_irq()")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In cc97ab235f ("MIPS: Simplify FP context initialization), init_fp_ctx
just initialize the fp/msa context, and own_fp_inatomic just restore
FCSR and 64bit FP regs from it, but miss MSACSR and upper MSA regs for
MSA, so MSACSR and MSA upper regs's value from previous task on current
cpu can leak into current task and cause unpredictable behavior when MSA
context not initialized.
Fixes: cc97ab235f ("MIPS: Simplify FP context initialization")
Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use of the new -flive-patching flag was introduced with the following
commit:
43bd3a95c9 ("kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled")
This flag has several drawbacks:
- It disables some optimizations, so it can have a negative effect on
performance.
- According to the GCC documentation it's not compatible with LTO, which
will become a compatibility issue as LTO support gets upstreamed in
the kernel.
- It was intended to be used for source-based patch generation tooling,
as opposed to binary-based patch generation tooling (e.g.,
kpatch-build). It probably should have at least been behind a
separate config option so as not to negatively affect other livepatch
users.
- Clang doesn't have the flag, so as far as I can tell, this method of
generating patches is incompatible with Clang, which like LTO is
becoming more mainstream.
- It breaks GCC's implicit noreturn detection for local functions. This
is the cause of several "unreachable instruction" objtool warnings.
- The broken noreturn detection is an obvious GCC regression, but we
haven't yet gotten GCC developers to acknowledge that, which doesn't
inspire confidence in their willingness to keep the feature working as
optimizations are added or changed going forward.
- While there *is* a distro which relies on this flag for their distro
livepatch module builds, there's not a publicly documented way to
create safe livepatch modules with it. Its use seems to be based on
tribal knowledge. It serves no benefit to those who don't know how to
use it.
(In fact, I believe the current livepatch documentation and samples
are misleading and dangerous, and should be corrected. Or at least
amended with a disclaimer. But I don't feel qualified to make such
changes.)
Also, we have an idea for using objtool to detect function changes,
which could potentially obsolete the need for this flag anyway.
At this point the flag has no benefits for upstream which would
counteract the above drawbacks. Revert it until it becomes more ready.
This reverts commit 43bd3a95c9.
Fixes: 43bd3a95c9 ("kbuild: use -flive-patching when CONFIG_LIVEPATCH is enabled")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/696262e997359666afa053fe7d1a9fb2bb373964.1595010490.git.jpoimboe@redhat.com
One can not simply remove vmalloc faulting on x86-32. Upstream
commit: 7f0a002b5a ("x86/mm: remove vmalloc faulting")
removed it on x86 alltogether because previously the
arch_sync_kernel_mappings() interface was introduced. This interface
added synchronization of vmalloc/ioremap page-table updates to all
page-tables in the system at creation time and was thought to make
vmalloc faulting obsolete.
But that assumption was incredibly naive.
It turned out that there is a race window between the time the vmalloc
or ioremap code establishes a mapping and the time it synchronizes
this change to other page-tables in the system.
During this race window another CPU or thread can establish a vmalloc
mapping which uses the same intermediate page-table entries (e.g. PMD
or PUD) and does no synchronization in the end, because it found all
necessary mappings already present in the kernel reference page-table.
But when these intermediate page-table entries are not yet
synchronized, the other CPU or thread will continue with a vmalloc
address that is not yet mapped in the page-table it currently uses,
causing an unhandled page fault and oops like below:
BUG: unable to handle page fault for address: fe80c000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
*pde = 33183067 *pte = a8648163
Oops: 0002 [#1] SMP
CPU: 1 PID: 13514 Comm: cve-2017-17053 Tainted: G
...
Call Trace:
ldt_dup_context+0x66/0x80
dup_mm+0x2b3/0x480
copy_process+0x133b/0x15c0
_do_fork+0x94/0x3e0
__ia32_sys_clone+0x67/0x80
__do_fast_syscall_32+0x3f/0x70
do_fast_syscall_32+0x29/0x60
do_SYSENTER_32+0x15/0x20
entry_SYSENTER_32+0x9f/0xf2
EIP: 0xb7eef549
So the arch_sync_kernel_mappings() interface is racy, but removing it
would mean to re-introduce the vmalloc_sync_all() interface, which is
even more awful. Keep arch_sync_kernel_mappings() in place and catch
the race condition in the page-fault handler instead.
Do a partial revert of above commit to get vmalloc faulting on x86-32
back in place.
Fixes: 7f0a002b5a ("x86/mm: remove vmalloc faulting")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200902155904.17544-1-joro@8bytes.org
When CONFIG_RETPOLINE is disabled, Clang uses a jump table for the
switch statement in cmdline_find_option (jump tables are disabled when
CONFIG_RETPOLINE is enabled). This function is called very early in boot
from sme_enable() if CONFIG_AMD_MEM_ENCRYPT is enabled. At this time,
the kernel is still executing out of the identity mapping, but the jump
table will contain virtual addresses.
Fix this by disabling jump tables for cmdline.c when AMD_MEM_ENCRYPT is
enabled.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200903023056.3914690-1-nivedita@alum.mit.edu
SYSFW ABI 3.0 has changed the rchan_oes_offset value for am654 to support
SR2.
Since the kernel now needs SYSFW API 3.0 to work because the merged irqchip
update, we need to also update the am654 rchan_oes_offset.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200831091019.25273-1-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Thanks to NVIDIA for confirming this workaround, and clarifying which HW
is affected.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Looks like when we converted everything over to Nvidia's class headers,
we mistakenly included the nvif/push507b.h instead of nvif/pushc37b.h,
which resulted in breaking CRC reporting for volta+:
nouveau 0000:1f:00.0: disp: chid 0 stat 10003361 reason 3
[RESERVED_METHOD] mthd 0d84 data 00000000 code 00000000
nouveau 0000:1f:00.0: disp: chid 0 stat 10003360 reason 3
[RESERVED_METHOD] mthd 0d80 data 00000000 code 00000000
nouveau 0000:1f:00.0: DRM: CRC notifier ctx for head 3 not finished
after 50ms
So, fix that.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: c4b27bc868 ("drm/nouveau/kms/nv50-: convert core crc_set_src() to new push macros")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Commit 2e26ccb119 ("drm/radeon: prefer lower reference dividers")
fixed screen flicker for HP Compaq nx9420 but breaks other laptops like
Asus X50SL.
Turns out we also need to favor lower feedback dividers.
Users confirmed this change fixes the regression and doesn't regress the
original fix.
Fixes: 2e26ccb119 ("drm/radeon: prefer lower reference dividers")
BugLink: https://bugs.launchpad.net/bugs/1791312
BugLink: https://bugs.launchpad.net/bugs/1861554
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On my R9 390, the voltage was reported as a constant 1000 mV.
This was due to a bug in smu7_hwmgr.c, in the smu7_read_sensor()
function, where some magic constants were used in a condition,
to determine whether the voltage should be read from PLANE2_VID
or PLANE1_VID. The VDDC mask was incorrectly used, instead of
the VDDGFX mask.
This patch changes the code to use the correct defined constants
(and apply the correct bitshift), thus resulting in correct voltage reporting.
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Starting in Linux 5.8, the graphics and memory clock frequency were not being
reported for CIK cards. This is a regression, since they were reported correctly
in Linux 5.7.
After investigation, I discovered that the smum_send_msg_to_smc() function,
attempts to call the corresponding get_argument() function of ci_smu_funcs.
However, the get_argument() function is not defined in ci_smu_funcs.
This patch fixes the bug by specifying the correct get_argument() function.
Fixes: a0ec225633 ("drm/amd/powerplay: unified interfaces for message issuing and response checking")
Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
