Star64_linux/drivers/clocksource/timer-stm32.c
Daniel Lezcano 3c84e75b1e clocksource/drivers/stm32: Factor out more of the clockevent code
In order to prepare the clocksource code, let's factor out the clockevent
code, split the prescaler and timer width code into separate functions.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-17-git-send-email-daniel.lezcano@linaro.org
[ Small edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:26 +01:00

269 lines
6.5 KiB
C

/*
* Copyright (C) Maxime Coquelin 2015
* Author: Maxime Coquelin <mcoquelin.stm32@gmail.com>
* License terms: GNU General Public License (GPL), version 2
*
* Inspired by time-efm32.c from Uwe Kleine-Koenig
*/
#include <linux/kernel.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/clk.h>
#include <linux/reset.h>
#include <linux/slab.h>
#include "timer-of.h"
#define TIM_CR1 0x00
#define TIM_DIER 0x0c
#define TIM_SR 0x10
#define TIM_EGR 0x14
#define TIM_CNT 0x24
#define TIM_PSC 0x28
#define TIM_ARR 0x2c
#define TIM_CCR1 0x34
#define TIM_CR1_CEN BIT(0)
#define TIM_CR1_UDIS BIT(1)
#define TIM_CR1_OPM BIT(3)
#define TIM_CR1_ARPE BIT(7)
#define TIM_DIER_UIE BIT(0)
#define TIM_DIER_CC1IE BIT(1)
#define TIM_SR_UIF BIT(0)
#define TIM_EGR_UG BIT(0)
#define TIM_PSC_MAX USHRT_MAX
#define TIM_PSC_CLKRATE 10000
struct stm32_timer_private {
int bits;
};
/**
* stm32_timer_of_bits_set - set accessor helper
* @to: a timer_of structure pointer
* @bits: the number of bits (16 or 32)
*
* Accessor helper to set the number of bits in the timer-of private
* structure.
*
*/
static void stm32_timer_of_bits_set(struct timer_of *to, int bits)
{
struct stm32_timer_private *pd = to->private_data;
pd->bits = bits;
}
/**
* stm32_timer_of_bits_get - get accessor helper
* @to: a timer_of structure pointer
*
* Accessor helper to get the number of bits in the timer-of private
* structure.
*
* Returns an integer corresponding to the number of bits.
*/
static int stm32_timer_of_bits_get(struct timer_of *to)
{
struct stm32_timer_private *pd = to->private_data;
return pd->bits;
}
static void stm32_clock_event_disable(struct timer_of *to)
{
writel_relaxed(0, timer_of_base(to) + TIM_DIER);
}
static void stm32_clock_event_enable(struct timer_of *to)
{
writel_relaxed(TIM_CR1_UDIS | TIM_CR1_CEN, timer_of_base(to) + TIM_CR1);
}
static int stm32_clock_event_shutdown(struct clock_event_device *clkevt)
{
struct timer_of *to = to_timer_of(clkevt);
stm32_clock_event_disable(to);
return 0;
}
static int stm32_clock_event_set_next_event(unsigned long evt,
struct clock_event_device *clkevt)
{
struct timer_of *to = to_timer_of(clkevt);
unsigned long now, next;
next = readl_relaxed(timer_of_base(to) + TIM_CNT) + evt;
writel_relaxed(next, timer_of_base(to) + TIM_CCR1);
now = readl_relaxed(timer_of_base(to) + TIM_CNT);
if ((next - now) > evt)
return -ETIME;
writel_relaxed(TIM_DIER_CC1IE, timer_of_base(to) + TIM_DIER);
return 0;
}
static int stm32_clock_event_set_periodic(struct clock_event_device *clkevt)
{
struct timer_of *to = to_timer_of(clkevt);
stm32_clock_event_enable(to);
return stm32_clock_event_set_next_event(timer_of_period(to), clkevt);
}
static int stm32_clock_event_set_oneshot(struct clock_event_device *clkevt)
{
struct timer_of *to = to_timer_of(clkevt);
stm32_clock_event_enable(to);
return 0;
}
static irqreturn_t stm32_clock_event_handler(int irq, void *dev_id)
{
struct clock_event_device *clkevt = (struct clock_event_device *)dev_id;
struct timer_of *to = to_timer_of(clkevt);
writel_relaxed(0, timer_of_base(to) + TIM_SR);
if (clockevent_state_periodic(clkevt))
stm32_clock_event_set_periodic(clkevt);
else
stm32_clock_event_shutdown(clkevt);
clkevt->event_handler(clkevt);
return IRQ_HANDLED;
}
/**
* stm32_timer_width - Sort out the timer width (32/16)
* @to: a pointer to a timer-of structure
*
* Write the 32-bit max value and read/return the result. If the timer
* is 32 bits wide, the result will be UINT_MAX, otherwise it will
* be truncated by the 16-bit register to USHRT_MAX.
*
*/
static void __init stm32_timer_set_width(struct timer_of *to)
{
u32 width;
writel_relaxed(UINT_MAX, timer_of_base(to) + TIM_ARR);
width = readl_relaxed(timer_of_base(to) + TIM_ARR);
stm32_timer_of_bits_set(to, width == UINT_MAX ? 32 : 16);
}
/**
* stm32_timer_set_prescaler - Compute and set the prescaler register
* @to: a pointer to a timer-of structure
*
* Depending on the timer width, compute the prescaler to always
* target a 10MHz timer rate for 16 bits. 32-bit timers are
* considered precise and long enough to not use the prescaler.
*/
static void __init stm32_timer_set_prescaler(struct timer_of *to)
{
int prescaler = 1;
if (stm32_timer_of_bits_get(to) != 32) {
prescaler = DIV_ROUND_CLOSEST(timer_of_rate(to),
TIM_PSC_CLKRATE);
/*
* The prescaler register is an u16, the variable
* can't be greater than TIM_PSC_MAX, let's cap it in
* this case.
*/
prescaler = prescaler < TIM_PSC_MAX ? prescaler : TIM_PSC_MAX;
}
writel_relaxed(prescaler - 1, timer_of_base(to) + TIM_PSC);
writel_relaxed(TIM_EGR_UG, timer_of_base(to) + TIM_EGR);
writel_relaxed(0, timer_of_base(to) + TIM_SR);
/* Adjust rate and period given the prescaler value */
to->of_clk.rate = DIV_ROUND_CLOSEST(to->of_clk.rate, prescaler);
to->of_clk.period = DIV_ROUND_UP(to->of_clk.rate, HZ);
}
static void __init stm32_clockevent_init(struct timer_of *to)
{
u32 bits = stm32_timer_of_bits_get(to);
to->clkevt.name = to->np->full_name;
to->clkevt.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
to->clkevt.set_state_shutdown = stm32_clock_event_shutdown;
to->clkevt.set_state_periodic = stm32_clock_event_set_periodic;
to->clkevt.set_state_oneshot = stm32_clock_event_set_oneshot;
to->clkevt.tick_resume = stm32_clock_event_shutdown;
to->clkevt.set_next_event = stm32_clock_event_set_next_event;
to->clkevt.rating = bits == 32 ? 250 : 100;
clockevents_config_and_register(&to->clkevt, timer_of_rate(to), 0x1,
(1 << bits) - 1);
pr_info("%pOF: STM32 clockevent driver initialized (%d bits)\n",
to->np, bits);
}
static int __init stm32_timer_init(struct device_node *node)
{
struct reset_control *rstc;
struct timer_of *to;
int ret;
to = kzalloc(sizeof(*to), GFP_KERNEL);
if (!to)
return -ENOMEM;
to->flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE;
to->of_irq.handler = stm32_clock_event_handler;
ret = timer_of_init(node, to);
if (ret)
goto err;
to->private_data = kzalloc(sizeof(struct stm32_timer_private),
GFP_KERNEL);
if (!to->private_data)
goto deinit;
rstc = of_reset_control_get(node, NULL);
if (!IS_ERR(rstc)) {
reset_control_assert(rstc);
reset_control_deassert(rstc);
}
stm32_timer_set_width(to);
stm32_timer_set_prescaler(to);
stm32_clockevent_init(to);
return 0;
deinit:
timer_of_cleanup(to);
err:
kfree(to);
return ret;
}
TIMER_OF_DECLARE(stm32, "st,stm32-timer", stm32_timer_init);