GitHub-Mirror/bl_mcu_sdk
2
0
Fork 0
mirror of https://github.com/Fishwaldo/bl_mcu_sdk.git synced 2025-03-15 19:31:43 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

[chore][openocd] add openocd config

Browse source
This commit is contained in:
jzlv 2023-01-11 20:36:12 +08:00
parent 240594aa20
commit 9e189b69cb
13 changed files with 215 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

3
tools/openocd/99-openocd.rules Normal file
View file

@ -0,0 +1,3 @@
# Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC
SUBSYSTEM=="tty", ATTRS{idVendor}=="0403",ATTRS{idProduct}=="6010", MODE="664", GROUP="plugdev"
SUBSYSTEM=="usb", ATTR{idVendor} =="0403",ATTR{idProduct} =="6010", MODE="664", GROUP="plugdev"

16
tools/openocd/interface/ft2232d.cfg Normal file
View file

@ -0,0 +1,16 @@
# BouffaloLab USB-JTAG/TTL adapter
adapter driver ftdi
ftdi_vid_pid 0x0403 0x6010
ftdi_channel 0
ftdi_tdo_sample_edge falling
transport select jtag
adapter speed 10000
ftdi_layout_init 0x00f8 0x00fb
#ftdi_layout_signal nTRST -data 0x0400
#ftdi_layout_signal nSRST -ndata 0x0020
#reset_config srst_only srst_push_pull
#adapter_nsrst_delay 100
#adapter_nsrst_assert_width 100

16
tools/openocd/interface/ft2232h.cfg Normal file
View file

@ -0,0 +1,16 @@
# BouffaloLab USB-JTAG/TTL adapter
adapter driver ftdi
ftdi_vid_pid 0x0403 0x6010
ftdi_channel 1
ftdi_tdo_sample_edge falling
transport select jtag
adapter speed 10000
ftdi_layout_init 0x00f8 0x00fb
#ftdi_layout_signal nTRST -data 0x0400
#ftdi_layout_signal nSRST -ndata 0x0020
#reset_config srst_only srst_push_pull
#adapter_nsrst_delay 100
#adapter_nsrst_assert_width 100

BIN
tools/openocd/libftdi1.dll Normal file
View file

Binary file not shown.

BIN
tools/openocd/libusb-0-1-4.dll Normal file
View file

Binary file not shown.

BIN
tools/openocd/libusb-1.0.dll Normal file
View file

Binary file not shown.

BIN
tools/openocd/libusb0.dll Normal file
View file

Binary file not shown.

BIN
tools/openocd/openocd Executable file
View file

Binary file not shown.

BIN
tools/openocd/openocd.exe Normal file
View file

Binary file not shown.

45
tools/openocd/target/tgt_602.cfg Normal file
View file

@ -0,0 +1,45 @@
#target chip
set _CHIPNAME riscv
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000c05
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
$_TARGETNAME.0 configure -work-area-phys 0x22020000 -work-area-size 0x10000 -work-area-backup 1
#$_TARGETNAME.0 configure -rtos auto
echo "Ready for Remote Connections"
$_TARGETNAME.0 configure -event reset-assert-pre {
echo "reset-assert-pre"
adapter speed 100
}
$_TARGETNAME.0 configure -event reset-deassert-post {
echo "reset-deassert-post"
adapter speed 4000
reg mstatus 0x7800
reg mie 0x0
# reg pc 0x22008000
}
$_TARGETNAME.0 configure -event reset-init {
echo "reset-init"
# 4MHz for FPGA
adapter speed 4000
}
gdb_memory_map enable
gdb_flash_program disable
riscv set_prefer_sba on
riscv set_command_timeout_sec 1
init
reset init
#jtag arp_init
#resume
#exit

45
tools/openocd/target/tgt_702.cfg Normal file
View file

@ -0,0 +1,45 @@
#target chip
set _CHIPNAME riscv
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x20000e05
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
$_TARGETNAME.0 configure -work-area-phys 0x22020000 -work-area-size 0x10000 -work-area-backup 1
#$_TARGETNAME.0 configure -rtos auto
echo "Ready for Remote Connections"
$_TARGETNAME.0 configure -event reset-assert-pre {
echo "reset-assert-pre"
adapter speed 100
}
$_TARGETNAME.0 configure -event reset-deassert-post {
echo "reset-deassert-post"
adapter speed 4000
reg mstatus 0x7800
reg mie 0x0
# reg pc 0x22008000
}
$_TARGETNAME.0 configure -event reset-init {
echo "reset-init"
# 4MHz for FPGA
adapter speed 4000
}
gdb_memory_map enable
gdb_flash_program disable
riscv set_prefer_sba on
riscv set_command_timeout_sec 1
init
reset init
#jtag arp_init
#resume
#exit

45
tools/openocd/target/tgt_c906.cfg Normal file
View file

@ -0,0 +1,45 @@
#target chip
set _CHIPNAME riscv
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10000b6f
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
$_TARGETNAME.0 configure -work-area-phys 0x3eff0000 -work-area-size 0x10000 -work-area-backup 0
#$_TARGETNAME.0 configure -rtos auto
echo "Ready for Remote Connections"
$_TARGETNAME.0 configure -event reset-assert-pre {
echo "reset-assert-pre"
adapter speed 100
}
$_TARGETNAME.0 configure -event reset-deassert-post {
echo "reset-deassert-post"
adapter speed 4000
reg mstatus 0x7800
reg mie 0x0
# reg pc 0x22008000
}
$_TARGETNAME.0 configure -event reset-init {
echo "reset-init"
# 4MHz for FPGA
adapter speed 4000
}
gdb_memory_map enable
gdb_flash_program disable
riscv set_prefer_sba off
riscv set_command_timeout_sec 3
init
#reset init
#jtag arp_init
#resume
#exit

45
tools/openocd/target/tgt_e907.cfg Normal file
View file

@ -0,0 +1,45 @@
#target chip
set _CHIPNAME riscv
jtag newtap $_CHIPNAME cpu -irlen 5 -expected-id 0x10000b6f
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME.0 riscv -chain-position $_TARGETNAME
$_TARGETNAME.0 configure -work-area-phys 0x40000000 -work-area-size 0x10000 -work-area-backup 0
#$_TARGETNAME.0 configure -rtos auto
echo "Ready for Remote Connections"
$_TARGETNAME.0 configure -event reset-assert-pre {
echo "reset-assert-pre"
adapter speed 100
}
$_TARGETNAME.0 configure -event reset-deassert-post {
echo "reset-deassert-post"
adapter speed 4000
reg mstatus 0x7800
reg mie 0x0
# reg pc 0x22008000
}
$_TARGETNAME.0 configure -event reset-init {
echo "reset-init"
# 4MHz for FPGA
adapter speed 4000
}
gdb_memory_map enable
gdb_flash_program disable
riscv set_prefer_sba off
riscv set_command_timeout_sec 3
init
#reset init
#jtag arp_init
#resume
#exit