build/config/boards/cubietruckplus.csc

# Allwinner A83T octa core 2Gb SoC Wifi
BOARD_NAME="Cubietruck+"
BOARDFAMILY="sun8i"
BOOTCONFIG="Cubietruck_plus_defconfig"
OVERLAY_PREFIX="sun8i-a83t"
KERNEL_TARGET="current,edge"
Add vendor name to the board description (#1997) * Add vendor name to the board desctiption, move Cubieboard 1 to supported 2020-05-29 12:22:38 +02:00			`# Allwinner A83T octa core 2Gb SoC Wifi`
Moving sunxi-next to 4.17.y (#1049) * [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup 2018-07-17 15:53:30 +02:00			`BOARD_NAME="Cubietruck+"`
			`BOARDFAMILY="sun8i"`
			`BOOTCONFIG="Cubietruck_plus_defconfig"`
			`OVERLAY_PREFIX="sun8i-a83t"`
Renaming DEV branch to EDGE (#2704) * Change DEV to EDGE * Renaming patches dev folder to edge * Move patches into subdir where they will be archived. * Relink patch directories properly 2021-03-24 19:01:53 +01:00			`KERNEL_TARGET="current,edge"`