Moving sunxi-next to 4.17.y (#1049)
* [Early WIP] Update sunxi-next to kernel 4.17
* Switch Allwinner 32 and 64bit to U-boot 2018.05
* Adjust patched for 4.17.y / sunxi-next
- adjust both configurations
- removing FAT support from u-boot (breaks if you try to save)
Tested those boards:
Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes
Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes
Lime A64: USB no, HDMI no, wireless buggy, eMMC yes
Orangepi prime H5: OK http://ix.io/1fZJ DVFS no
Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT
* Kernel config update, enabling HDMI on CT+
* Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead
* Update orangepioneplus.wip
* Update orangepioneplus.wip
* Fix H6 build process
* Add regulator bits for Orangepizero+, thanks to @5kft
* add H5 support for optional 1.3v regulator and 1.3GHz operation
This patch adds two optional overlays that can be used to:
1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support
2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks
Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator
is controlled by GPIO PL6.
* updates for the NanoPi NEO Plus2
This change introduces a patch that provides two changes for the NanoPi NEO Plus2:
* Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks
* Correct the configurations of the on-board power and status LEDs
* Adjust nightly building and few boards config cleanup
2018-07-17 15:53:30 +02:00
|
|
|
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
|
2018-11-18 03:12:32 +00:00
|
|
|
index 1238de25a..ba5238ef5 100644
|
Moving sunxi-next to 4.17.y (#1049)
* [Early WIP] Update sunxi-next to kernel 4.17
* Switch Allwinner 32 and 64bit to U-boot 2018.05
* Adjust patched for 4.17.y / sunxi-next
- adjust both configurations
- removing FAT support from u-boot (breaks if you try to save)
Tested those boards:
Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes
Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes
Lime A64: USB no, HDMI no, wireless buggy, eMMC yes
Orangepi prime H5: OK http://ix.io/1fZJ DVFS no
Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT
* Kernel config update, enabling HDMI on CT+
* Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead
* Update orangepioneplus.wip
* Update orangepioneplus.wip
* Fix H6 build process
* Add regulator bits for Orangepizero+, thanks to @5kft
* add H5 support for optional 1.3v regulator and 1.3GHz operation
This patch adds two optional overlays that can be used to:
1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support
2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks
Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator
is controlled by GPIO PL6.
* updates for the NanoPi NEO Plus2
This change introduces a patch that provides two changes for the NanoPi NEO Plus2:
* Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks
* Correct the configurations of the on-board power and status LEDs
* Adjust nightly building and few boards config cleanup
2018-07-17 15:53:30 +02:00
|
|
|
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
|
|
|
|
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus.dts
|
2018-11-18 03:12:32 +00:00
|
|
|
@@ -57,6 +57,27 @@
|
|
|
|
|
enable-active-high;
|
|
|
|
|
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
|
2017-10-08 14:44:51 +03:00
|
|
|
};
|
|
|
|
|
+
|
|
|
|
|
+ reg_sy8113b: gpio-regulator {
|
|
|
|
|
+ compatible = "regulator-gpio";
|
|
|
|
|
+ regulator-name = "vdd-cpux";
|
|
|
|
|
+ regulator-type = "voltage";
|
|
|
|
|
+ regulator-boot-on;
|
|
|
|
|
+ regulator-always-on;
|
|
|
|
|
+ regulator-min-microvolt = <1100000>;
|
|
|
|
|
+ regulator-max-microvolt = <1300000>;
|
|
|
|
|
+ regulator-ramp-delay = <50>; /* 4ms */
|
|
|
|
|
+
|
|
|
|
|
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
|
|
|
|
|
+ enable-active-high;
|
|
|
|
|
+ gpios-states = <0x1>;
|
|
|
|
|
+ states = <1100000 0x0
|
|
|
|
|
+ 1300000 0x1>;
|
|
|
|
|
+ };
|
|
|
|
|
+};
|
|
|
|
|
+
|
|
|
|
|
+&cpu0 {
|
|
|
|
|
+ cpu-supply = <®_sy8113b>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
&ehci0 {
|
