mirror of
https://github.com/Fishwaldo/build.git
synced 2025-07-04 12:09:24 +00:00
[xt-q8l-v10] fixed act8846 regulator against kernel 5.4, enabled eMMC DDR mode (#1778)
* Added ALSA configuration bits for rk3288 HDMI and SPDIF to allow pulseaudio show proper sound device/profile/mapping names instead of just "Built-in Audio" for all of them * Added ALSA device description in asound.conf to provide correct labels for PulseAudio for RK3288 devices when SPDIF and DW-I2S-HDMI simple audio cards are exposed Removed unnecessary ALSA configuration files previously added from rockchip.conf * Fixed cpu operating points tables and raised a bit (+5°C) cooling for non-critical temperatures for xt-q8l-v10 in dev and next kernel flavours * Fixed again cpu opp table * Removed whole cpu opp table and retouch only necessary operating points * Enabled gpiomem driver for xt-q8l-v10 in next kernel flavour * Added debounce delay and card detect gpio pins for sdmmc card holder for xt-q8l-v10 board * Added card-detect and debounce delay for sdmmc for xt-q8l-v10 board in next kernel flavour too * Fixed missing comment in xt-q8l-v10 device tree patch * Added gpiomem to xt-q8l-v10 board for dev kernel * Fixed FAN53555/Silergy patches to accomodate changes in u-boot v2019.04 * Changed property property flags for USB regulators in u-boot and kernel: kernel is now informed that bootloader is going to turn the USB power on * Fixed indentation in rk3288-xt-q8l-v10.dts, raised debounce delay to sdmmc, added vbus-supply to USB host, removed some unneeded properties * Added working DDR52 mode for eMMC on xt-q8l-v10 * Removed regulator-off-in-suspend for some xt-q8l-v10 regulators due to changed in act8865.c driver which causes the regulators to be misconfigured * Adjusted targets for xt-q8l-v10 (provides bionic desktop + buster server) * Removed all regular-state-mem nodes in xt-q8l-v10 device tree because the change in act8865.c affects also non-off entries * Brought xt-q8l-v10 device tree from rockchip-current to rockchip-dev
This commit is contained in:
Paolo
GitHub
parent
a186fd4984
commit
008f3fd47c
3 changed files with 416 additions and 254 deletions
|
|
@ -620,10 +620,8 @@ tritium-h5 current bionic cli stable yes
|
|||
|
||||
# xt-q8l-v10
|
||||
|
||||
xt-q8l-v10 legacy buster cli stable yes
|
||||
xt-q8l-v10 legacy bionic desktop stable yes
|
||||
xt-q8l-v10 current bionic minimal stable yes
|
||||
xt-q8l-v10 current bullseye minimal stable yes
|
||||
xt-q8l-v10 current bionic desktop stable yes
|
||||
xt-q8l-v10 current buster minimal stable yes
|
||||
|
||||
# Z28 pro
|
||||
|
||||
|
|
|
|||
|
|
@ -1,6 +1,9 @@
|
|||
diff --git a/arch/arm/boot/dts/rk3288-xt-q8l-v10.dts b/arch/arm/boot/dts/rk3288-xt-q8l-v10.dts
|
||||
new file mode 100644
|
||||
index 000000000..539e445b4
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/boot/dts/rk3288-xt-q8l-v10.dts 2019-08-03 13:55:48.719992666 +0000
|
||||
@@ -0,0 +1,982 @@
|
||||
+++ b/arch/arm/boot/dts/rk3288-xt-q8l-v10.dts
|
||||
@@ -0,0 +1,1061 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
|
||||
+ * 2018 Paolo Sabatino <paolo.sabatino@gm**l.com>
|
||||
|
|
@ -53,7 +56,7 @@
|
|||
+ model = "XT-Q8L-V10-RK3288";
|
||||
+ compatible = "generic,xt-q8l-v10-rk3288", "rockchip,rk3288";
|
||||
+
|
||||
+ memory {
|
||||
+ memory@0 {
|
||||
+ reg = <0x0 0x0 0x0 0x80000000>;
|
||||
+ device_type = "memory";
|
||||
+ };
|
||||
|
|
@ -83,7 +86,7 @@
|
|||
+ clock-frequency = <125000000>;
|
||||
+ clock-output-names = "ext_gmac";
|
||||
+ };
|
||||
+
|
||||
+
|
||||
+ /*
|
||||
+ * Handle the IR receiver using the gpio-ir-receiver kernel module.
|
||||
+ * This works flawlessy, the original xt-q8l-v10 remote uses a NEC
|
||||
|
|
@ -97,13 +100,13 @@
|
|||
+ pinctrl-0 = <&ir_int>;
|
||||
+ linux,rc-map-name = "rc-xt-q8l-v10";
|
||||
+ wakeup-source;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ keys: gpio-keys {
|
||||
+ compatible = "gpio-keys";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pwr_key>;
|
||||
+
|
||||
|
|
@ -115,7 +118,7 @@
|
|||
+ wakeup-source;
|
||||
+ debounce-interval = <100>;
|
||||
+ };
|
||||
+
|
||||
+
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
|
|
@ -127,7 +130,7 @@
|
|||
+ so while there is mass storage access it turns red and
|
||||
+ when it is idle is blue
|
||||
+ */
|
||||
+ gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
|
||||
+ gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
|
||||
+ label = "power";
|
||||
+ linux,default-trigger = "mmc0";
|
||||
+ pinctrl-names = "default";
|
||||
|
|
@ -162,7 +165,12 @@
|
|||
+ regulator-name = "vcc_flash";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ /*gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
|
||||
+ states = <1800000 0>,
|
||||
+ <3300000 1>;
|
||||
+ */
|
||||
+ vin-supply = <&vcc_io>;
|
||||
+ startup-delay-us = <100000>;
|
||||
+ };
|
||||
+
|
||||
+ vcc_host_5v: usb-host-regulator {
|
||||
|
|
@ -171,8 +179,8 @@
|
|||
+ regulator-name = "vcc_host_5v";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ regulator-boot-on;
|
||||
+ enable-active-high;
|
||||
+ regulator-boot-on;
|
||||
+ enable-active-high;
|
||||
+ vin-supply = <&vcc_sys>;
|
||||
+ };
|
||||
+
|
||||
|
|
@ -200,6 +208,13 @@
|
|||
+ post-power-on-delay-ms = <100>;
|
||||
+ };
|
||||
+
|
||||
+ emmc_pwrseq: emmc-pwrseq {
|
||||
+ compatible = "mmc-pwrseq-emmc";
|
||||
+ pinctrl-0 = <&emmc_reset>;
|
||||
+ pinctrl-names = "default";
|
||||
+ reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
+ * Sound taken from tinkerboard device tree, adapted to q8.
|
||||
+ */
|
||||
|
|
@ -217,27 +232,27 @@
|
|||
+ sound-dai = <&i2s>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ soundcard-spdif {
|
||||
+ compatible = "simple-audio-card";
|
||||
+ simple-audio-card,name = "SPDIF";
|
||||
+ simple-audio-card,dai-link@1 {
|
||||
+
|
||||
+ cpu {
|
||||
+ sound-dai = <&spdif>;
|
||||
+ };
|
||||
+
|
||||
+ codec {
|
||||
+ sound-dai = <&spdif_out>;
|
||||
+ };
|
||||
+
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ spdif_out: spdif-out {
|
||||
+ compatible = "linux,spdif-dit";
|
||||
+ #sound-dai-cells = <0>;
|
||||
+ };
|
||||
+ soundcard-spdif {
|
||||
+ compatible = "simple-audio-card";
|
||||
+ simple-audio-card,name = "SPDIF";
|
||||
+ simple-audio-card,dai-link@1 {
|
||||
+
|
||||
+ cpu {
|
||||
+ sound-dai = <&spdif>;
|
||||
+ };
|
||||
+
|
||||
+ codec {
|
||||
+ sound-dai = <&spdif_out>;
|
||||
+ };
|
||||
+
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ spdif_out: spdif-out {
|
||||
+ compatible = "linux,spdif-dit";
|
||||
+ #sound-dai-cells = <0>;
|
||||
+ };
|
||||
+
|
||||
+};
|
||||
+
|
||||
|
|
@ -303,8 +318,8 @@
|
|||
+ regulator-boot-on;
|
||||
+ vin-supply = <&vcc_sys>;
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdd_gpu: syr828@41 {
|
||||
|
|
@ -318,8 +333,8 @@
|
|||
+ regulator-always-on;
|
||||
+ vin-supply = <&vcc_sys>;
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ hym8563: hym8563@51 {
|
||||
|
|
@ -351,7 +366,7 @@
|
|||
+ wakeup-source;
|
||||
+
|
||||
+ regulators {
|
||||
+
|
||||
+
|
||||
+ /*
|
||||
+ * Regulator controlling DDR memory - always on
|
||||
+ */
|
||||
|
|
@ -360,9 +375,12 @@
|
|||
+ regulator-min-microvolt = <1200000>;
|
||||
+ regulator-max-microvolt = <1200000>;
|
||||
+ regulator-always-on;
|
||||
+ /*
|
||||
+ * Broken in kernel 5.4
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -374,9 +392,12 @@
|
|||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-always-on;
|
||||
+ /*
|
||||
+ * Broken in kernel 5.4
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -390,9 +411,12 @@
|
|||
+ regulator-min-microvolt = <1100000>;
|
||||
+ regulator-max-microvolt = <1100000>;
|
||||
+ regulator-always-on;
|
||||
+ /*
|
||||
+ * Broken in kernel 5.4
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -405,9 +429,12 @@
|
|||
+ regulator-min-microvolt = <2000000>;
|
||||
+ regulator-max-microvolt = <2000000>;
|
||||
+ regulator-always-on;
|
||||
+ /*
|
||||
+ * Broken in kernel 5.4
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -416,13 +443,16 @@
|
|||
+ */
|
||||
+ vccio_sd: REG5 {
|
||||
+ regulator-name = "vccio_sd";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-always-on;
|
||||
+ /*
|
||||
+ * Broken in kernel 5.4
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <3300000>;
|
||||
+ };
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -434,9 +464,12 @@
|
|||
+ regulator-min-microvolt = <1000000>;
|
||||
+ regulator-max-microvolt = <1000000>;
|
||||
+ regulator-always-on;
|
||||
+ /*
|
||||
+ * Broken in kernel 5.4
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -449,9 +482,14 @@
|
|||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ regulator-always-on;
|
||||
+
|
||||
+ /*
|
||||
+ The regulator can be set off in suspend, but kernel 5.4 modifications
|
||||
+ to enable suspend for ACT8865 device break the ACT8846
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -463,9 +501,14 @@
|
|||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-always-on; // Turn this on to get SPDIF!
|
||||
+
|
||||
+ /*
|
||||
+ The regulator can be set off in suspend, but kernel 5.4 modifications
|
||||
+ to enable suspend for ACT8865 device break the ACT8846
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -475,9 +518,13 @@
|
|||
+ regulator-name = "vcc_lan";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ /*
|
||||
+ * Broken in kernel 5.4
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -489,9 +536,13 @@
|
|||
+ regulator-min-microvolt = <1000000>;
|
||||
+ regulator-max-microvolt = <1000000>;
|
||||
+ regulator-always-on;
|
||||
+
|
||||
+ /*
|
||||
+ * Broken in kernel 5.4
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -503,9 +554,13 @@
|
|||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ regulator-always-on;
|
||||
+
|
||||
+ /*
|
||||
+ * Broken in kernel 5.4
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -518,9 +573,14 @@
|
|||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ regulator-always-on;
|
||||
+
|
||||
+ /*
|
||||
+ The regulator can be set off in suspend, but kernel 5.4 modifications
|
||||
+ to enable suspend for ACT8865 device break the ACT8846
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
|
|
@ -535,7 +595,7 @@
|
|||
+};
|
||||
+
|
||||
+&i2c4 {
|
||||
+
|
||||
+
|
||||
+ /*
|
||||
+ * Here should go the RK1000 audio codec parts, but seems that
|
||||
+ * there is no driver in linux kernel at the moment, so we can't
|
||||
|
|
@ -545,7 +605,7 @@
|
|||
+ * http://dl.radxa.com/rock/docs/hw/ds/RK1000-S%20DATASHEET%20V14.pdf
|
||||
+ */
|
||||
+ status = "okay";
|
||||
+
|
||||
+
|
||||
+};
|
||||
+
|
||||
+&i2c5 {
|
||||
|
|
@ -575,12 +635,12 @@
|
|||
+ bias-pull-up;
|
||||
+ drive-strength = <8>;
|
||||
+ };
|
||||
+
|
||||
+
|
||||
+ pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
|
||||
+ bias-pull-up;
|
||||
+ drive-strength = <8>;
|
||||
+ };
|
||||
+
|
||||
+
|
||||
+ pcfg_pull_none_8ma: pcfg-pull-none-8ma {
|
||||
+ bias-disable;
|
||||
+ drive-strength = <8>;
|
||||
|
|
@ -594,18 +654,18 @@
|
|||
+ pcfg_wl_int: pcfg-wl-int {
|
||||
+ bias-pull-up;
|
||||
+ };
|
||||
+
|
||||
+
|
||||
+ act8846 {
|
||||
+
|
||||
+
|
||||
+ /*
|
||||
+ * Original q8 device tree says:
|
||||
+ * - gpio0 11 HIGH -> power hold
|
||||
+ * - gpio7 1 LOW -> possibly pmic-vsel, we don't care
|
||||
+ */
|
||||
+ * - gpio7 1 LOW -> possibly pmic-vsel, we don't care
|
||||
+ */
|
||||
+ pmic_vsel: pmic-vsel {
|
||||
+ rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>;
|
||||
+ };
|
||||
+
|
||||
+
|
||||
+ pwr_hold: pwr-hold {
|
||||
+ rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
+ };
|
||||
|
|
@ -650,7 +710,7 @@
|
|||
+ };
|
||||
+
|
||||
+ sdmmc {
|
||||
+
|
||||
+
|
||||
+ /*
|
||||
+ * Copied from firefly board definition to give more drive to
|
||||
+ * the sdmmc pins. The Q8 seems to be quite able to drive
|
||||
|
|
@ -701,14 +761,22 @@
|
|||
+ };
|
||||
+
|
||||
+ };
|
||||
+
|
||||
+
|
||||
+
|
||||
+
|
||||
+ wireless-bluetooth {
|
||||
+ uart0_gpios: uart0-gpios {
|
||||
+ rockchip,pins = <4 19 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ emmc {
|
||||
+
|
||||
+ emmc_reset: emmc-reset {
|
||||
+ rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ };
|
||||
+
|
||||
+};
|
||||
+
|
||||
+&saradc {
|
||||
|
|
@ -717,24 +785,34 @@
|
|||
+};
|
||||
+
|
||||
+&emmc {
|
||||
+
|
||||
+
|
||||
+ /*
|
||||
+ * eMMC seems to be 52Mhz device on q8 devices, so set it here
|
||||
+ * vmmc-supply and vqmmc-supply are removed because they hang
|
||||
+ * u-boot >= v2018.03
|
||||
+ * From the original q8l firmware and eMMC datasheet it also should
|
||||
+ * support DDR highspeed mode, but using mmc-ddr-3_3v or mmc-ddr-1_8v
|
||||
+ * properties are not working
|
||||
+ * eMMC is a 52Mhz DDR device on q8 devices, so set it here.
|
||||
+ * Setting default-sample-rate to 180 degrees is very important,
|
||||
+ * otherwise the eMMC is not stable and may not be able to negotiate
|
||||
+ * the right clock.
|
||||
+ * Despite the code already seems to use 180 degree phase when
|
||||
+ * MMC + 8bit bus is set, we need to set default phase here too.
|
||||
+ *
|
||||
+ * Huge hint came from this patch:
|
||||
+ * https://patchwork.kernel.org/patch/11129183/
|
||||
+ *
|
||||
+ */
|
||||
+ clock-frequency = <50000000>;
|
||||
+
|
||||
+ broken-cd;
|
||||
+ bus-width = <8>;
|
||||
+ cap-mmc-highspeed;
|
||||
+
|
||||
+ disable-wp;
|
||||
+ non-removable;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
|
||||
+ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
|
||||
+
|
||||
+ vmmc-supply = <&vcc_io>;
|
||||
+ vqmmc-supply = <&vcc_flash>;
|
||||
+
|
||||
+ mmc-pwrseq = <&emmc_pwrseq>;
|
||||
+ mmc-ddr-1_8v;
|
||||
+ rockchip,default-sample-phase = <180>;
|
||||
+
|
||||
+ status = "okay";
|
||||
+};
|
||||
|
|
@ -746,9 +824,7 @@
|
|||
+ cap-mmc-highspeed;
|
||||
+ cap-sd-highspeed;
|
||||
+ cd-gpios = <&gpio6 RK_PC6 GPIO_ACTIVE_LOW>;
|
||||
+ cd-debounce-delay-ms = <200>;
|
||||
+ post-power-on-delay-ms = <50>;
|
||||
+ supports-cqe;
|
||||
+ cd-debounce-delay-ms = <500>;
|
||||
+ disable-wp;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
|
||||
|
|
@ -766,33 +842,33 @@
|
|||
+&sdio0 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+
|
||||
+ bus-width = <4>;
|
||||
+ mmc-pwrseq = <&sdio0_pwrseq>;
|
||||
+
|
||||
+
|
||||
+ vmmc-supply = <&vcc_io>;
|
||||
+ vqmmc-supply = <&vcc_18>; // This must be the same as in io_domains,
|
||||
+ vqmmc-supply = <&vcc_18>; // This must be the same as in io_domains,
|
||||
+ // otherwise the mmc1 device won't be detected properly
|
||||
+
|
||||
+// clock-frequency = <50000000>;
|
||||
+// max-frequency = <50000000>;
|
||||
+
|
||||
+ // clock-frequency = <50000000>;
|
||||
+ // max-frequency = <50000000>;
|
||||
+
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>;
|
||||
+
|
||||
+ pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>;
|
||||
+
|
||||
+ cap-sdio-irq;
|
||||
+ no-mmc;
|
||||
+ no-sd;
|
||||
+ cap-sd-highspeed; // required, otherwise does not work!
|
||||
+ supports-sdio;
|
||||
+ supports-sdio;
|
||||
+ non-removable;
|
||||
+
|
||||
+
|
||||
+ keep-power-in-suspend;
|
||||
+ disable-wp;
|
||||
+
|
||||
+
|
||||
+
|
||||
+
|
||||
+ status = "okay";
|
||||
+
|
||||
+
|
||||
+ brcmf: bcrmf@1 {
|
||||
+ reg = <1>;
|
||||
+ compatible = "brcm,bcm4329-fmac";
|
||||
|
|
@ -800,8 +876,8 @@
|
|||
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
|
||||
+ interrupt-names = "host-wake";
|
||||
+ status = "okay";
|
||||
+ };
|
||||
+
|
||||
+ };
|
||||
+
|
||||
+ //sd-uhs-sdr104; // required to be disabled, otherwise the device get
|
||||
+ // detected, but there is no communication
|
||||
+
|
||||
|
|
@ -823,13 +899,13 @@
|
|||
+ * These dmas described here for uarts are present in original q8 board
|
||||
+ * dts, so I replicate them here because documentation says that serial
|
||||
+ * ports can have dmas.
|
||||
+ * note:
|
||||
+ * note:
|
||||
+ * - uart0 is the serial port connected to the bluetooth module
|
||||
+ * - uart2 is the onboard serial port
|
||||
+ *
|
||||
+ * - uart2 is the onboard serial port
|
||||
+ *
|
||||
+ * As ok kernel 4.19 DMA for serial ports is disabled because it makes
|
||||
+ * the ports unusable
|
||||
+ *
|
||||
+ *
|
||||
+ */
|
||||
+&uart0 {
|
||||
+ pinctrl-names = "default";
|
||||
|
|
@ -873,31 +949,25 @@
|
|||
+ * specify the proper resources for all the phys though.
|
||||
+ * The reference patch which works in conjuction with the reset lines:
|
||||
+ * https://patchwork.kernel.org/patch/9469811/
|
||||
+ *
|
||||
+ *
|
||||
+ */
|
||||
+&usbphy {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usbphy0 {
|
||||
+ vbus-supply = <&vcc_otg_5v>;
|
||||
+};
|
||||
+
|
||||
+&usbphy2 {
|
||||
+ vbus-supply = <&vcc_host_5v>;
|
||||
+};
|
||||
+
|
||||
+&usb_host0_ehci {
|
||||
+ dr_mode = "host";
|
||||
+ reg = <0x0 0xff500000 0x0 0x20000>;
|
||||
+ status = "disable";
|
||||
+ dr_mode = "host";
|
||||
+ reg = <0x0 0xff500000 0x0 0x20000>;
|
||||
+ status = "disable";
|
||||
+};
|
||||
+
|
||||
+&usb_host1 {
|
||||
+ vbus-supply = <&vcc_host_5v>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_otg {
|
||||
+ vbus-supply = <&vcc_otg_5v>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
|
|
@ -924,18 +994,10 @@
|
|||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+//&vpu_service {
|
||||
+// status = "okay";
|
||||
+//};
|
||||
+
|
||||
+&hevc_mmu {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+//&hevc_service {
|
||||
+// status = "okay";
|
||||
+//};
|
||||
+
|
||||
+&wdt {
|
||||
+ status = "okay";
|
||||
+};
|
||||
|
|
@ -978,8 +1040,28 @@
|
|||
+ opp-1608000000 {
|
||||
+ opp-microvolt = <1300000>;
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
+ Remove the overclocking/turbo frequencies
|
||||
+ */
|
||||
+ /delete-node/ opp@1704000000;
|
||||
+ /delete-node/ opp@1800000000;
|
||||
+ /delete-node/ opp@1896000000;
|
||||
+ /delete-node/ opp@1920000000;
|
||||
+ /delete-node/ opp@1992000000;
|
||||
+ /delete-node/ opp@2016000000;
|
||||
+ /delete-node/ opp@2040000000;
|
||||
+ /delete-node/ opp@2064000000;
|
||||
+ /delete-node/ opp@2088000000;
|
||||
+ /delete-node/ opp@2112000000;
|
||||
+ /delete-node/ opp@2136000000;
|
||||
+ /delete-node/ opp@2160000000;
|
||||
+ /delete-node/ opp@2184000000;
|
||||
+ /delete-node/ opp@2208000000;
|
||||
+
|
||||
+
|
||||
+};
|
||||
+
|
||||
+&gpiomem {
|
||||
+ status = "okay";
|
||||
+ status = "okay";
|
||||
+};
|
||||
|
|
|
|||
|
|
@ -1,6 +1,9 @@
|
|||
diff --git a/arch/arm/boot/dts/rk3288-xt-q8l-v10.dts b/arch/arm/boot/dts/rk3288-xt-q8l-v10.dts
|
||||
new file mode 100644
|
||||
index 000000000..539e445b4
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/boot/dts/rk3288-xt-q8l-v10.dts 2019-08-03 13:55:48.719992666 +0000
|
||||
@@ -0,0 +1,982 @@
|
||||
+++ b/arch/arm/boot/dts/rk3288-xt-q8l-v10.dts
|
||||
@@ -0,0 +1,1061 @@
|
||||
+/*
|
||||
+ * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
|
||||
+ * 2018 Paolo Sabatino <paolo.sabatino@gm**l.com>
|
||||
|
|
@ -53,7 +56,7 @@
|
|||
+ model = "XT-Q8L-V10-RK3288";
|
||||
+ compatible = "generic,xt-q8l-v10-rk3288", "rockchip,rk3288";
|
||||
+
|
||||
+ memory {
|
||||
+ memory@0 {
|
||||
+ reg = <0x0 0x0 0x0 0x80000000>;
|
||||
+ device_type = "memory";
|
||||
+ };
|
||||
|
|
@ -83,7 +86,7 @@
|
|||
+ clock-frequency = <125000000>;
|
||||
+ clock-output-names = "ext_gmac";
|
||||
+ };
|
||||
+
|
||||
+
|
||||
+ /*
|
||||
+ * Handle the IR receiver using the gpio-ir-receiver kernel module.
|
||||
+ * This works flawlessy, the original xt-q8l-v10 remote uses a NEC
|
||||
|
|
@ -97,13 +100,13 @@
|
|||
+ pinctrl-0 = <&ir_int>;
|
||||
+ linux,rc-map-name = "rc-xt-q8l-v10";
|
||||
+ wakeup-source;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ keys: gpio-keys {
|
||||
+ compatible = "gpio-keys";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pwr_key>;
|
||||
+
|
||||
|
|
@ -115,7 +118,7 @@
|
|||
+ wakeup-source;
|
||||
+ debounce-interval = <100>;
|
||||
+ };
|
||||
+
|
||||
+
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
|
|
@ -127,7 +130,7 @@
|
|||
+ so while there is mass storage access it turns red and
|
||||
+ when it is idle is blue
|
||||
+ */
|
||||
+ gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
|
||||
+ gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
|
||||
+ label = "power";
|
||||
+ linux,default-trigger = "mmc0";
|
||||
+ pinctrl-names = "default";
|
||||
|
|
@ -162,7 +165,12 @@
|
|||
+ regulator-name = "vcc_flash";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ /*gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>;
|
||||
+ states = <1800000 0>,
|
||||
+ <3300000 1>;
|
||||
+ */
|
||||
+ vin-supply = <&vcc_io>;
|
||||
+ startup-delay-us = <100000>;
|
||||
+ };
|
||||
+
|
||||
+ vcc_host_5v: usb-host-regulator {
|
||||
|
|
@ -171,8 +179,8 @@
|
|||
+ regulator-name = "vcc_host_5v";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ regulator-boot-on;
|
||||
+ enable-active-high;
|
||||
+ regulator-boot-on;
|
||||
+ enable-active-high;
|
||||
+ vin-supply = <&vcc_sys>;
|
||||
+ };
|
||||
+
|
||||
|
|
@ -200,6 +208,13 @@
|
|||
+ post-power-on-delay-ms = <100>;
|
||||
+ };
|
||||
+
|
||||
+ emmc_pwrseq: emmc-pwrseq {
|
||||
+ compatible = "mmc-pwrseq-emmc";
|
||||
+ pinctrl-0 = <&emmc_reset>;
|
||||
+ pinctrl-names = "default";
|
||||
+ reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
+ * Sound taken from tinkerboard device tree, adapted to q8.
|
||||
+ */
|
||||
|
|
@ -217,27 +232,27 @@
|
|||
+ sound-dai = <&i2s>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ soundcard-spdif {
|
||||
+ compatible = "simple-audio-card";
|
||||
+ simple-audio-card,name = "SPDIF";
|
||||
+ simple-audio-card,dai-link@1 {
|
||||
+
|
||||
+ cpu {
|
||||
+ sound-dai = <&spdif>;
|
||||
+ };
|
||||
+
|
||||
+ codec {
|
||||
+ sound-dai = <&spdif_out>;
|
||||
+ };
|
||||
+
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ spdif_out: spdif-out {
|
||||
+ compatible = "linux,spdif-dit";
|
||||
+ #sound-dai-cells = <0>;
|
||||
+ };
|
||||
+ soundcard-spdif {
|
||||
+ compatible = "simple-audio-card";
|
||||
+ simple-audio-card,name = "SPDIF";
|
||||
+ simple-audio-card,dai-link@1 {
|
||||
+
|
||||
+ cpu {
|
||||
+ sound-dai = <&spdif>;
|
||||
+ };
|
||||
+
|
||||
+ codec {
|
||||
+ sound-dai = <&spdif_out>;
|
||||
+ };
|
||||
+
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ spdif_out: spdif-out {
|
||||
+ compatible = "linux,spdif-dit";
|
||||
+ #sound-dai-cells = <0>;
|
||||
+ };
|
||||
+
|
||||
+};
|
||||
+
|
||||
|
|
@ -303,8 +318,8 @@
|
|||
+ regulator-boot-on;
|
||||
+ vin-supply = <&vcc_sys>;
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ vdd_gpu: syr828@41 {
|
||||
|
|
@ -318,8 +333,8 @@
|
|||
+ regulator-always-on;
|
||||
+ vin-supply = <&vcc_sys>;
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ hym8563: hym8563@51 {
|
||||
|
|
@ -351,7 +366,7 @@
|
|||
+ wakeup-source;
|
||||
+
|
||||
+ regulators {
|
||||
+
|
||||
+
|
||||
+ /*
|
||||
+ * Regulator controlling DDR memory - always on
|
||||
+ */
|
||||
|
|
@ -360,9 +375,12 @@
|
|||
+ regulator-min-microvolt = <1200000>;
|
||||
+ regulator-max-microvolt = <1200000>;
|
||||
+ regulator-always-on;
|
||||
+ /*
|
||||
+ * Broken in kernel 5.4
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -374,9 +392,12 @@
|
|||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-always-on;
|
||||
+ /*
|
||||
+ * Broken in kernel 5.4
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -390,9 +411,12 @@
|
|||
+ regulator-min-microvolt = <1100000>;
|
||||
+ regulator-max-microvolt = <1100000>;
|
||||
+ regulator-always-on;
|
||||
+ /*
|
||||
+ * Broken in kernel 5.4
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -405,9 +429,12 @@
|
|||
+ regulator-min-microvolt = <2000000>;
|
||||
+ regulator-max-microvolt = <2000000>;
|
||||
+ regulator-always-on;
|
||||
+ /*
|
||||
+ * Broken in kernel 5.4
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -416,13 +443,16 @@
|
|||
+ */
|
||||
+ vccio_sd: REG5 {
|
||||
+ regulator-name = "vccio_sd";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-always-on;
|
||||
+ /*
|
||||
+ * Broken in kernel 5.4
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-on-in-suspend;
|
||||
+ regulator-suspend-microvolt = <3300000>;
|
||||
+ };
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -434,9 +464,12 @@
|
|||
+ regulator-min-microvolt = <1000000>;
|
||||
+ regulator-max-microvolt = <1000000>;
|
||||
+ regulator-always-on;
|
||||
+ /*
|
||||
+ * Broken in kernel 5.4
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -449,9 +482,14 @@
|
|||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ regulator-always-on;
|
||||
+
|
||||
+ /*
|
||||
+ The regulator can be set off in suspend, but kernel 5.4 modifications
|
||||
+ to enable suspend for ACT8865 device break the ACT8846
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -463,9 +501,14 @@
|
|||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-always-on; // Turn this on to get SPDIF!
|
||||
+
|
||||
+ /*
|
||||
+ The regulator can be set off in suspend, but kernel 5.4 modifications
|
||||
+ to enable suspend for ACT8865 device break the ACT8846
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -475,9 +518,13 @@
|
|||
+ regulator-name = "vcc_lan";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+
|
||||
+ /*
|
||||
+ * Broken in kernel 5.4
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -489,9 +536,13 @@
|
|||
+ regulator-min-microvolt = <1000000>;
|
||||
+ regulator-max-microvolt = <1000000>;
|
||||
+ regulator-always-on;
|
||||
+
|
||||
+ /*
|
||||
+ * Broken in kernel 5.4
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -503,9 +554,13 @@
|
|||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ regulator-always-on;
|
||||
+
|
||||
+ /*
|
||||
+ * Broken in kernel 5.4
|
||||
+ regulator-state-mem {
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ regulator-on-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
|
|
@ -518,9 +573,14 @@
|
|||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
+ regulator-always-on;
|
||||
+
|
||||
+ /*
|
||||
+ The regulator can be set off in suspend, but kernel 5.4 modifications
|
||||
+ to enable suspend for ACT8865 device break the ACT8846
|
||||
+ regulator-state-mem {
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ regulator-off-in-suspend;
|
||||
+ };
|
||||
+ */
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
|
|
@ -535,7 +595,7 @@
|
|||
+};
|
||||
+
|
||||
+&i2c4 {
|
||||
+
|
||||
+
|
||||
+ /*
|
||||
+ * Here should go the RK1000 audio codec parts, but seems that
|
||||
+ * there is no driver in linux kernel at the moment, so we can't
|
||||
|
|
@ -545,7 +605,7 @@
|
|||
+ * http://dl.radxa.com/rock/docs/hw/ds/RK1000-S%20DATASHEET%20V14.pdf
|
||||
+ */
|
||||
+ status = "okay";
|
||||
+
|
||||
+
|
||||
+};
|
||||
+
|
||||
+&i2c5 {
|
||||
|
|
@ -575,12 +635,12 @@
|
|||
+ bias-pull-up;
|
||||
+ drive-strength = <8>;
|
||||
+ };
|
||||
+
|
||||
+
|
||||
+ pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
|
||||
+ bias-pull-up;
|
||||
+ drive-strength = <8>;
|
||||
+ };
|
||||
+
|
||||
+
|
||||
+ pcfg_pull_none_8ma: pcfg-pull-none-8ma {
|
||||
+ bias-disable;
|
||||
+ drive-strength = <8>;
|
||||
|
|
@ -594,18 +654,18 @@
|
|||
+ pcfg_wl_int: pcfg-wl-int {
|
||||
+ bias-pull-up;
|
||||
+ };
|
||||
+
|
||||
+
|
||||
+ act8846 {
|
||||
+
|
||||
+
|
||||
+ /*
|
||||
+ * Original q8 device tree says:
|
||||
+ * - gpio0 11 HIGH -> power hold
|
||||
+ * - gpio7 1 LOW -> possibly pmic-vsel, we don't care
|
||||
+ */
|
||||
+ * - gpio7 1 LOW -> possibly pmic-vsel, we don't care
|
||||
+ */
|
||||
+ pmic_vsel: pmic-vsel {
|
||||
+ rockchip,pins = <7 1 RK_FUNC_GPIO &pcfg_output_low>;
|
||||
+ };
|
||||
+
|
||||
+
|
||||
+ pwr_hold: pwr-hold {
|
||||
+ rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
+ };
|
||||
|
|
@ -650,7 +710,7 @@
|
|||
+ };
|
||||
+
|
||||
+ sdmmc {
|
||||
+
|
||||
+
|
||||
+ /*
|
||||
+ * Copied from firefly board definition to give more drive to
|
||||
+ * the sdmmc pins. The Q8 seems to be quite able to drive
|
||||
|
|
@ -701,14 +761,22 @@
|
|||
+ };
|
||||
+
|
||||
+ };
|
||||
+
|
||||
+
|
||||
+
|
||||
+
|
||||
+ wireless-bluetooth {
|
||||
+ uart0_gpios: uart0-gpios {
|
||||
+ rockchip,pins = <4 19 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ emmc {
|
||||
+
|
||||
+ emmc_reset: emmc-reset {
|
||||
+ rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+
|
||||
+ };
|
||||
+
|
||||
+};
|
||||
+
|
||||
+&saradc {
|
||||
|
|
@ -717,24 +785,34 @@
|
|||
+};
|
||||
+
|
||||
+&emmc {
|
||||
+
|
||||
+
|
||||
+ /*
|
||||
+ * eMMC seems to be 52Mhz device on q8 devices, so set it here
|
||||
+ * vmmc-supply and vqmmc-supply are removed because they hang
|
||||
+ * u-boot >= v2018.03
|
||||
+ * From the original q8l firmware and eMMC datasheet it also should
|
||||
+ * support DDR highspeed mode, but using mmc-ddr-3_3v or mmc-ddr-1_8v
|
||||
+ * properties are not working
|
||||
+ * eMMC is a 52Mhz DDR device on q8 devices, so set it here.
|
||||
+ * Setting default-sample-rate to 180 degrees is very important,
|
||||
+ * otherwise the eMMC is not stable and may not be able to negotiate
|
||||
+ * the right clock.
|
||||
+ * Despite the code already seems to use 180 degree phase when
|
||||
+ * MMC + 8bit bus is set, we need to set default phase here too.
|
||||
+ *
|
||||
+ * Huge hint came from this patch:
|
||||
+ * https://patchwork.kernel.org/patch/11129183/
|
||||
+ *
|
||||
+ */
|
||||
+ clock-frequency = <50000000>;
|
||||
+
|
||||
+ broken-cd;
|
||||
+ bus-width = <8>;
|
||||
+ cap-mmc-highspeed;
|
||||
+
|
||||
+ disable-wp;
|
||||
+ non-removable;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
|
||||
+ pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>;
|
||||
+
|
||||
+ vmmc-supply = <&vcc_io>;
|
||||
+ vqmmc-supply = <&vcc_flash>;
|
||||
+
|
||||
+ mmc-pwrseq = <&emmc_pwrseq>;
|
||||
+ mmc-ddr-1_8v;
|
||||
+ rockchip,default-sample-phase = <180>;
|
||||
+
|
||||
+ status = "okay";
|
||||
+};
|
||||
|
|
@ -746,9 +824,7 @@
|
|||
+ cap-mmc-highspeed;
|
||||
+ cap-sd-highspeed;
|
||||
+ cd-gpios = <&gpio6 RK_PC6 GPIO_ACTIVE_LOW>;
|
||||
+ cd-debounce-delay-ms = <200>;
|
||||
+ post-power-on-delay-ms = <50>;
|
||||
+ supports-cqe;
|
||||
+ cd-debounce-delay-ms = <500>;
|
||||
+ disable-wp;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
|
||||
|
|
@ -766,33 +842,33 @@
|
|||
+&sdio0 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+
|
||||
+
|
||||
+ bus-width = <4>;
|
||||
+ mmc-pwrseq = <&sdio0_pwrseq>;
|
||||
+
|
||||
+
|
||||
+ vmmc-supply = <&vcc_io>;
|
||||
+ vqmmc-supply = <&vcc_18>; // This must be the same as in io_domains,
|
||||
+ vqmmc-supply = <&vcc_18>; // This must be the same as in io_domains,
|
||||
+ // otherwise the mmc1 device won't be detected properly
|
||||
+
|
||||
+// clock-frequency = <50000000>;
|
||||
+// max-frequency = <50000000>;
|
||||
+
|
||||
+ // clock-frequency = <50000000>;
|
||||
+ // max-frequency = <50000000>;
|
||||
+
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>;
|
||||
+
|
||||
+ pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>;
|
||||
+
|
||||
+ cap-sdio-irq;
|
||||
+ no-mmc;
|
||||
+ no-sd;
|
||||
+ cap-sd-highspeed; // required, otherwise does not work!
|
||||
+ supports-sdio;
|
||||
+ supports-sdio;
|
||||
+ non-removable;
|
||||
+
|
||||
+
|
||||
+ keep-power-in-suspend;
|
||||
+ disable-wp;
|
||||
+
|
||||
+
|
||||
+
|
||||
+
|
||||
+ status = "okay";
|
||||
+
|
||||
+
|
||||
+ brcmf: bcrmf@1 {
|
||||
+ reg = <1>;
|
||||
+ compatible = "brcm,bcm4329-fmac";
|
||||
|
|
@ -800,8 +876,8 @@
|
|||
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
|
||||
+ interrupt-names = "host-wake";
|
||||
+ status = "okay";
|
||||
+ };
|
||||
+
|
||||
+ };
|
||||
+
|
||||
+ //sd-uhs-sdr104; // required to be disabled, otherwise the device get
|
||||
+ // detected, but there is no communication
|
||||
+
|
||||
|
|
@ -823,13 +899,13 @@
|
|||
+ * These dmas described here for uarts are present in original q8 board
|
||||
+ * dts, so I replicate them here because documentation says that serial
|
||||
+ * ports can have dmas.
|
||||
+ * note:
|
||||
+ * note:
|
||||
+ * - uart0 is the serial port connected to the bluetooth module
|
||||
+ * - uart2 is the onboard serial port
|
||||
+ *
|
||||
+ * - uart2 is the onboard serial port
|
||||
+ *
|
||||
+ * As ok kernel 4.19 DMA for serial ports is disabled because it makes
|
||||
+ * the ports unusable
|
||||
+ *
|
||||
+ *
|
||||
+ */
|
||||
+&uart0 {
|
||||
+ pinctrl-names = "default";
|
||||
|
|
@ -873,31 +949,25 @@
|
|||
+ * specify the proper resources for all the phys though.
|
||||
+ * The reference patch which works in conjuction with the reset lines:
|
||||
+ * https://patchwork.kernel.org/patch/9469811/
|
||||
+ *
|
||||
+ *
|
||||
+ */
|
||||
+&usbphy {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usbphy0 {
|
||||
+ vbus-supply = <&vcc_otg_5v>;
|
||||
+};
|
||||
+
|
||||
+&usbphy2 {
|
||||
+ vbus-supply = <&vcc_host_5v>;
|
||||
+};
|
||||
+
|
||||
+&usb_host0_ehci {
|
||||
+ dr_mode = "host";
|
||||
+ reg = <0x0 0xff500000 0x0 0x20000>;
|
||||
+ status = "disable";
|
||||
+ dr_mode = "host";
|
||||
+ reg = <0x0 0xff500000 0x0 0x20000>;
|
||||
+ status = "disable";
|
||||
+};
|
||||
+
|
||||
+&usb_host1 {
|
||||
+ vbus-supply = <&vcc_host_5v>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usb_otg {
|
||||
+ vbus-supply = <&vcc_otg_5v>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
|
|
@ -924,18 +994,10 @@
|
|||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+//&vpu_service {
|
||||
+// status = "okay";
|
||||
+//};
|
||||
+
|
||||
+&hevc_mmu {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+//&hevc_service {
|
||||
+// status = "okay";
|
||||
+//};
|
||||
+
|
||||
+&wdt {
|
||||
+ status = "okay";
|
||||
+};
|
||||
|
|
@ -978,8 +1040,28 @@
|
|||
+ opp-1608000000 {
|
||||
+ opp-microvolt = <1300000>;
|
||||
+ };
|
||||
+
|
||||
+ /*
|
||||
+ Remove the overclocking/turbo frequencies
|
||||
+ */
|
||||
+ /delete-node/ opp@1704000000;
|
||||
+ /delete-node/ opp@1800000000;
|
||||
+ /delete-node/ opp@1896000000;
|
||||
+ /delete-node/ opp@1920000000;
|
||||
+ /delete-node/ opp@1992000000;
|
||||
+ /delete-node/ opp@2016000000;
|
||||
+ /delete-node/ opp@2040000000;
|
||||
+ /delete-node/ opp@2064000000;
|
||||
+ /delete-node/ opp@2088000000;
|
||||
+ /delete-node/ opp@2112000000;
|
||||
+ /delete-node/ opp@2136000000;
|
||||
+ /delete-node/ opp@2160000000;
|
||||
+ /delete-node/ opp@2184000000;
|
||||
+ /delete-node/ opp@2208000000;
|
||||
+
|
||||
+
|
||||
+};
|
||||
+
|
||||
+&gpiomem {
|
||||
+ status = "okay";
|
||||
+ status = "okay";
|
||||
+};
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue