Refactor asound.state to use a variable for the file name

build-all.sh

@@ -199,7 +199,7 @@ for line in "${buildlist[@]}"; do
 		CPUMIN CPUMAX UBOOT_VER KERNEL_VER GOVERNOR BOOTSIZE BOOTFS_TYPE UBOOT_TOOLCHAIN KERNEL_TOOLCHAIN PACKAGE_LIST_EXCLUDE KERNEL_IMAGE_TYPE \
 		write_uboot_platform family_tweaks setup_write_uboot_platform BOOTSCRIPT UBOOT_TARGET_MAP LOCALVERSION UBOOT_COMPILER KERNEL_COMPILER \
 		MODULES MODULES_NEXT MODULES_DEV INITRD_ARCH HAS_UUID_SUPPORT BOOTENV_FILE BOOTDELAY MODULES_BLACKLIST MODULES_BLACKLIST_NEXT \
-		MODULES_BLACKLIST_DEV MOUNT SDCARD BOOTPATCHDIR KERNELPATCHDIR buildtext RELEASE IMAGE_TYPE OVERLAY_PREFIX
+		MODULES_BLACKLIST_DEV MOUNT SDCARD BOOTPATCHDIR KERNELPATCHDIR buildtext RELEASE IMAGE_TYPE OVERLAY_PREFIX ASOUND_STATE
 
 	read BOARD BRANCH RELEASE BUILD_DESKTOP <<< $line
 	n=$[$n+1]

config/sources/sun50iw1.conf

@@ -26,6 +26,12 @@ case $BRANCH in
 
 	GOVERNOR=interactive
 	INITRD_ARCH=arm
+
+	if [[ $BOARD == pinebook-a64 ]]; then
+		ASOUND_STATE='asound.state.pinebooka64-default'
+	else
+		ASOUND_STATE='asound.state.pine64-default'
+	fi
 	;;
 
 	dev)
@@ -61,13 +67,9 @@ family_tweaks()
 		for batlogo in low_pwr.bmp bempty.bmp battery_charge.bmp ; do
 			cp "$SRC/lib/bin/icons/pinebook-a64_$batlogo" "$CACHEDIR/$SDCARD/boot/bat/$batlogo"
 		done
-		# Audio / boot logo
-		mkdir -p $CACHEDIR/$SDCARD/var/lib/alsa/
+		# boot logo
 		if [[ $BOARD == pinebook-a64 ]]; then
-			cp $SRC/lib/config/asound.state.pinebooka64-default $CACHEDIR/$SDCARD/var/lib/alsa/asound.state
 			cp "$SRC/lib/bin/icons/pinebook-a64_bootlogo.bmp" "$CACHEDIR/$SDCARD/bootlogo.bmp"
-		else
-			cp $SRC/lib/config/asound.state.pine64-default $CACHEDIR/$SDCARD/var/lib/alsa/asound.state
 		fi
 	fi
 	if [[ $BRANCH == dev && $BOARD == pine64so ]]; then

config/sources/sun50iw2.conf

@@ -9,13 +9,9 @@ BOOTENV_FILE='sun50iw2-next.txt'
 [[ -z $CPUMAX ]] && CPUMAX=1010000
 GOVERNOR=ondemand
 
+ASOUND_STATE='asound.state.sun50iw2-dev'
+
 write_uboot_platform()
 {
 	dd if=$1/u-boot-sunxi-with-spl.bin of=$2 bs=1k seek=8 conv=fsync > /dev/null 2>&1
 }
-
-family_tweaks()
-{
-	mkdir -p $CACHEDIR/$SDCARD/var/lib/alsa/
-	cp $SRC/lib/config/asound.state.sun50iw2-dev $CACHEDIR/$SDCARD/var/lib/alsa/asound.state
-}

config/sources/sun7i.conf

@@ -14,6 +14,8 @@ case $BRANCH in
 
 	next)
 	CPUMAX=960000
+
+	ASOUND_STATE='asound.state.sunxi-next'
 	;;
 
 	dev)
@@ -39,8 +41,4 @@ family_tweaks()
 	sed -e 's/DEVICE=""/DEVICE="\/dev\/input\/event1"/g' -i $CACHEDIR/$SDCARD/etc/lirc/hardware.conf
 	sed -e 's/DRIVER="UNCONFIGURED"/DRIVER="devinput"/g' -i $CACHEDIR/$SDCARD/etc/lirc/hardware.conf
 	cp $SRC/lib/config/lirc.conf.cubietruck $CACHEDIR/$SDCARD/etc/lirc/lircd.conf
-	if [[ $BRANCH == next ]]; then
-		mkdir -p $CACHEDIR/$SDCARD/var/lib/alsa/
-		cp $SRC/lib/config/asound.state.sunxi-next $CACHEDIR/$SDCARD/var/lib/alsa/asound.state
-	fi
 }

config/sources/sun8i-r40.conf

@@ -1,7 +1,7 @@
 
 source "${BASH_SOURCE%/*}/sunxi_common.inc"
 
-[[ -z $OVERLAY_PREFIX ]] && OVERLAY_PREFIX='sun8i-h3'
+[[ -z $OVERLAY_PREFIX ]] && OVERLAY_PREFIX='sun8i-r40'
 
 case $BRANCH in
 	dev)
@@ -18,32 +18,3 @@ esac
 
 [[ -z $CPUMIN ]] && CPUMIN=480000
 [[ -z $CPUMAX ]] && CPUMAX=1010000
-
-family_tweaks()
-{
-	# this is for legacy kernel only
-	sed -e 's/DEVICE=""/DEVICE="\/dev\/lirc0"/g' -i $CACHEDIR/$SDCARD/etc/lirc/hardware.conf
-	sed -e 's/MODULES=""/MODULES="sunxi_cir"/g' -i $CACHEDIR/$SDCARD/etc/lirc/hardware.conf
-	sed -e 's/DRIVER="UNCONFIGURED"/DRIVER="default"/g' -i $CACHEDIR/$SDCARD/etc/lirc/hardware.conf
-	cp $SRC/lib/config/lirc.conf.cubietruck $CACHEDIR/$SDCARD/etc/lirc/lircd.conf
-	mkdir -p $CACHEDIR/$SDCARD/var/lib/alsa/
-	if [[ $BRANCH == default ]]; then
-		cp $SRC/lib/config/asound.state.sun8i-default $CACHEDIR/$SDCARD/var/lib/alsa/asound.state
-	else
-		cp $SRC/lib/config/asound.state.sun8i-dev $CACHEDIR/$SDCARD/var/lib/alsa/asound.state
-	fi
-	# enable serial gadget on OTG port since the board doesn't have Ethernet
-	case ${BOARD} in
-		orangepilite|nanopiair|orangepizero*)
-		mkdir -p $CACHEDIR/$SDCARD/etc/systemd/system/serial-getty@ttyGS0.service.d
-		if [[ $BRANCH == default ]]; then
-		cat <<-EOF > $CACHEDIR/$SDCARD/etc/systemd/system/serial-getty@ttyGS0.service.d/10-switch-role.conf
-		[Service]
-		ExecStartPre=-/bin/sh -c "echo 2 > /sys/bus/platform/devices/sunxi_usb_udc/otg_role"
-		EOF
-		fi
-		chroot $CACHEDIR/$SDCARD /bin/bash -c "systemctl --no-reload enable serial-getty@ttyGS0.service > /dev/null"
-		echo "ttyGS0" >> $CACHEDIR/$SDCARD/etc/securetty
-		;;
-	esac
-}

config/sources/sun8i.conf

@@ -10,6 +10,8 @@ case $BRANCH in
 	KERNELSOURCE='https://github.com/igorpecovnik/linux'
 	KERNELBRANCH='branch:sun8i'
 	KERNELDIR='linux-sun8i'
+
+	ASOUND_STATE='asound.state.sun8i-default'
 	;;
 
 	dev)
@@ -18,6 +20,8 @@ case $BRANCH in
 	KERNELDIR='linux-sun8i-mainline'
 
 	GOVERNOR=ondemand
+
+	ASOUND_STATE='asound.state.sun8i-dev'
 	;;
 esac
 
@@ -31,12 +35,6 @@ family_tweaks()
 	sed -e 's/MODULES=""/MODULES="sunxi_cir"/g' -i $CACHEDIR/$SDCARD/etc/lirc/hardware.conf
 	sed -e 's/DRIVER="UNCONFIGURED"/DRIVER="default"/g' -i $CACHEDIR/$SDCARD/etc/lirc/hardware.conf
 	cp $SRC/lib/config/lirc.conf.cubietruck $CACHEDIR/$SDCARD/etc/lirc/lircd.conf
-	mkdir -p $CACHEDIR/$SDCARD/var/lib/alsa/
-	if [[ $BRANCH == default ]]; then
-		cp $SRC/lib/config/asound.state.sun8i-default $CACHEDIR/$SDCARD/var/lib/alsa/asound.state
-	else
-		cp $SRC/lib/config/asound.state.sun8i-dev $CACHEDIR/$SDCARD/var/lib/alsa/asound.state
-	fi
 	# enable serial gadget on OTG port since the board doesn't have Ethernet
 	case ${BOARD} in
 		orangepilite|nanopiair|orangepizero*)

distributions.sh

@@ -176,6 +176,10 @@ install_common()
 	# to prevent creating swap file on NFS (needs specific kernel options)
 	# and f2fs/btrfs (not recommended or needs specific kernel options)
 	[[ $ROOTFS_TYPE != ext4 ]] && touch $CACHEDIR/$SDCARD/var/swap
+
+	# install initial asound.state if defined
+	mkdir -p $CACHEDIR/$SDCARD/var/lib/alsa/
+	[[ -n $ASOUND_STATE ]] && cp $SRC/lib/config/$ASOUND_STATE $CACHEDIR/$SDCARD/var/lib/alsa/asound.state
 }
 
 install_distribution_specific()