remove useless patch according to 5.0.y

patch/kernel/sunxi-dev/board-pine-h6-pine-h6-0032-net-stmmac-sun8i-force-select-external-PHY-when-no-i.patch

@@ -1,41 +0,0 @@
-From 12bc6b6c1fbc938216a95f6cac983df2b2cd757a Mon Sep 17 00:00:00 2001
-From: Icenowy Zheng <icenowy@aosc.io>
-Date: Tue, 9 Jan 2018 23:58:12 +0800
-Subject: [PATCH 32/35] net: stmmac: sun8i: force select external PHY when no
- internal one
-
-The PHY selection bit also exists on SoCs without an internal PHY; if
-it's set to 1 (internal PHY) then the MAC will not make use of any PHY.
-
-This problem appears when adapting for H6, which has no real internal
-PHY (the "internal PHY" on H6 is not on-die, but on a co-packaged AC200
-chip, via RMII interface at GPIO bank A), but the PHY selection bit is
-set.
-
-Force the PHY selection bit to 0 when no external PHY to select this
-problem.
-
-Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
----
- drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
-index a3fa65b..099daef 100644
---- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
-+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
-@@ -826,6 +826,11 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
- 		 * address. No need to mask it again.
- 		 */
- 		reg |= 1 << H3_EPHY_ADDR_SHIFT;
-+	} else {
-+		/* For SoCs without internal PHY the PHY selection bit should be
-+		 * set to 0 (external PHY).
-+		 */
-+		reg &= ~(H3_EPHY_SELECT);
- 	}
- 
- 	if (!of_property_read_u32(node, "allwinner,tx-delay-ps", &val)) {
--- 
-2.7.4
-