diff --git a/patch/kernel/rockchip-next/board-tinkerboard-support-older-eMMC-installs.patch b/patch/kernel/rockchip-next/board-tinkerboard-support-older-eMMC-installs.patch
new file mode 100644
index 000000000..5779bc54a
--- /dev/null
+++ b/patch/kernel/rockchip-next/board-tinkerboard-support-older-eMMC-installs.patch
@@ -0,0 +1,665 @@
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 2d0b2f4c4..d5c9022e7 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -859,6 +859,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+ 	rk3288-firefly-beta.dtb \
+ 	rk3288-firefly.dtb \
+ 	rk3288-firefly-reload.dtb \
++	rk3288-miniarm.dtb \
+ 	rk3288-miqi.dtb \
+ 	rk3288-phycore-rdk.dtb \
+ 	rk3288-popmetal.dtb \
+diff --git a/arch/arm/boot/dts/rk3288-miniarm.dts b/arch/arm/boot/dts/rk3288-miniarm.dts
+new file mode 100644
+index 000000000..d0961c35d
+--- /dev/null
++++ b/arch/arm/boot/dts/rk3288-miniarm.dts
+@@ -0,0 +1,647 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
++ */
++
++/dts-v1/;
++
++#include "rk3288.dtsi"
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/clock/rockchip,rk808.h>
++
++/ {
++	model = "Rockchip RK3288 Tinker Board";
++	compatible = "asus,rk3288-tinker", "rockchip,rk3288";
++
++	chosen {
++		stdout-path = "serial2:115200n8";
++	};
++
++	memory {
++		reg = <0x0 0x0 0x0 0x80000000>;
++		device_type = "memory";
++	};
++
++	ext_gmac: external-gmac-clock {
++		compatible = "fixed-clock";
++		#clock-cells = <0>;
++		clock-frequency = <125000000>;
++		clock-output-names = "ext_gmac";
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		autorepeat;
++
++		pinctrl-names = "default";
++		pinctrl-0 = <&pwrbtn>;
++
++		button@0 {
++			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
++			linux,code = <KEY_POWER>;
++			label = "GPIO Key Power";
++			linux,input-type = <1>;
++			wakeup-source;
++			debounce-interval = <100>;
++		};
++	};
++
++	gpio-leds {
++		compatible = "gpio-leds";
++
++		act-led {
++			gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger="mmc0";
++		};
++
++		heartbeat-led {
++			gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger="heartbeat";
++		};
++
++		pwr-led {
++			gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
++			linux,default-trigger = "default-on";
++		};
++	};
++
++	sound {
++		compatible = "simple-audio-card";
++		simple-audio-card,format = "i2s";
++		simple-audio-card,name = "rockchip,tinker-codec";
++		simple-audio-card,mclk-fs = <512>;
++
++		simple-audio-card,codec {
++			sound-dai = <&hdmi>;
++		};
++
++		simple-audio-card,cpu {
++			sound-dai = <&i2s>;
++		};
++	};
++
++	/* This is essential to get SDIO devices working.
++	   The Wifi depends on SDIO ! */
++	sdio_pwrseq: sdio-pwrseq {
++		compatible = "mmc-pwrseq-simple";
++		clocks = <&rk808 RK808_CLKOUT1>;
++		clock-names = "ext_clock";
++		pinctrl-names = "default";
++		pinctrl-0 = <&chip_enable_h>, <&wifi_enable_h>;
++
++		/*
++		 * On the module itself this is one of these (depending
++		 * on the actual card populated):
++		 * - SDIO_RESET_L_WL_REG_ON
++		 * - PDN (power down when low)
++		 */
++		reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>, <&gpio4 RK_PD3 GPIO_ACTIVE_LOW>;
++	};
++
++	vcc_sys: vsys-regulator {
++		compatible = "regulator-fixed";
++		regulator-name = "vcc_sys";
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		regulator-always-on;
++		regulator-boot-on;
++	};
++
++	vcc_sd: sdmmc-regulator {
++		compatible = "regulator-fixed";
++		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&sdmmc_pwr>;
++		regulator-name = "vcc_sd";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		startup-delay-us = <100000>;
++		vin-supply = <&vcc_io>;
++	};
++
++	wireless-wlan {
++		compatible = "wlan-platdata";
++		rockchip,grf = <&grf>;
++		wifi_chip_type = "8723bs";
++		sdio_vref = <1800>;
++		WIFI,host_wake_irq = <&gpio4 30 GPIO_ACTIVE_HIGH>;
++		status = "okay";
++	};
++/*
++	wireless-bluetooth {
++		compatible = "bluetooth-platdata";
++		uart_rts_gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
++		pinctrl-names = "default","rts_gpio";
++		pinctrl-0 = <&uart0_rts>;
++		pinctrl-1 = <&uart0_gpios>;
++		BT,reset_gpio    = <&gpio4 29 GPIO_ACTIVE_HIGH>;
++		BT,wake_gpio     = <&gpio4 26 GPIO_ACTIVE_HIGH>;
++		BT,wake_host_irq = <&gpio4 31 GPIO_ACTIVE_HIGH>;
++		status = "okay";
++	};
++*/
++
++};
++
++&cpu0 {
++	cpu0-supply = <&vdd_cpu>;
++};
++
++&gmac {
++	assigned-clocks = <&cru SCLK_MAC>;
++	assigned-clock-parents = <&ext_gmac>;
++	clock_in_out = "input";
++	phy-mode = "rgmii";
++	phy-supply = <&vcc33_lan>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&rgmii_pins>;
++	snps,reset-gpio = <&gpio4 7 0>;
++	snps,reset-active-low;
++	snps,reset-delays-us = <0 10000 1000000>;
++	tx_delay = <0x30>;
++	rx_delay = <0x10>;
++	status = "ok";
++};
++
++&gpu {
++	mali-supply = <&vdd_gpu>;
++	status = "okay";
++};
++
++&hdmi {
++	ddc-i2c-bus = <&i2c5>;
++	status = "okay";
++};
++
++&i2c0 {
++	clock-frequency = <400000>;
++	status = "okay";
++
++	rk808: pmic@1b {
++		compatible = "rockchip,rk808";
++		reg = <0x1b>;
++		interrupt-parent = <&gpio0>;
++		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
++		#clock-cells = <1>;
++		clock-output-names = "xin32k", "rk808-clkout2";
++		dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
++				<&gpio0 12 GPIO_ACTIVE_HIGH>;
++		pinctrl-names = "default";
++		pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
++		rockchip,system-power-controller;
++		wakeup-source;
++
++		vcc1-supply = <&vcc_sys>;
++		vcc2-supply = <&vcc_sys>;
++		vcc3-supply = <&vcc_sys>;
++		vcc4-supply = <&vcc_sys>;
++		vcc6-supply = <&vcc_sys>;
++		vcc7-supply = <&vcc_sys>;
++		vcc8-supply = <&vcc_io>;
++		vcc9-supply = <&vcc_io>;
++		vcc10-supply = <&vcc_io>;
++		vcc11-supply = <&vcc_sys>;
++		vcc12-supply = <&vcc_io>;
++		vddio-supply = <&vcc_io>;
++
++		regulators {
++			vdd_cpu: DCDC_REG1 {
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <712500>;
++				regulator-max-microvolt = <1500000>;
++				regulator-name = "vdd_arm";
++				regulator-ramp-delay = <6000>;
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdd_gpu: DCDC_REG2 {
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <712500>;
++				regulator-max-microvolt = <1500000>;
++				regulator-name = "vdd_gpu";
++				regulator-ramp-delay = <6000>;
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1000000>;
++				};
++			};
++
++			vcc_ddr: DCDC_REG3 {
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-name = "vcc_ddr";
++				regulator-state-mem {
++					regulator-on-in-suspend;
++				};
++			};
++
++			vcc_io: DCDC_REG4 {
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++				regulator-name = "vcc_io";
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <3300000>;
++				};
++			};
++
++			vcc18_ldo1: LDO_REG1 {
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++				regulator-name = "vcc18_ldo1";
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1800000>;
++				};
++			};
++
++			vcc33_mipi: LDO_REG2 {
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++				regulator-name = "vcc33_mipi";
++				regulator-state-mem {
++					regulator-off-in-suspend;
++				};
++			};
++
++			vdd_10: LDO_REG3 {
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1000000>;
++				regulator-max-microvolt = <1000000>;
++				regulator-name = "vdd_10";
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1000000>;
++				};
++			};
++
++			vcc18_codec: LDO_REG4 {
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++				regulator-name = "vcc18_codec";
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1800000>;
++				};
++			};
++
++			vccio_sd: LDO_REG5 {
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <3300000>;
++				regulator-name = "vccio_sd";
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <3300000>;
++				};
++			};
++
++			vdd10_lcd: LDO_REG6 {
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1000000>;
++				regulator-max-microvolt = <1000000>;
++				regulator-name = "vdd10_lcd";
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1000000>;
++				};
++			};
++
++			vcc_18: LDO_REG7 {
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++				regulator-name = "vcc_18";
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1800000>;
++				};
++			};
++
++			vcc18_lcd: LDO_REG8 {
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++				regulator-name = "vcc18_lcd";
++				regulator-state-mem {
++					regulator-on-in-suspend;
++					regulator-suspend-microvolt = <1800000>;
++				};
++			};
++
++			vcc33_sd: SWITCH_REG1 {
++				regulator-boot-on;
++				regulator-name = "vcc33_sd";
++				regulator-state-mem {
++					regulator-on-in-suspend;
++				};
++			};
++
++			vcc33_lan: SWITCH_REG2 {
++				regulator-always-on;
++				regulator-boot-on;
++				regulator-name = "vcc33_lan";
++				regulator-state-mem {
++					regulator-on-in-suspend;
++				};
++			};
++		};
++	};
++};
++
++&i2c1 {
++	status = "okay";
++};
++
++&i2c2 {
++	status = "okay";
++
++	afc0:af-controller@0 {
++		status = "okay";
++		compatible = "silicon touch,vm149C-v4l2-i2c-subdev";
++		reg = <0x0c>;
++	};
++
++	eeprom:m24c08@50 {
++		compatible = "at,24c08";
++		reg = <0x50>;
++	};
++};
++
++&i2c3 {
++	status = "okay";
++};
++
++&i2c4 {
++	status = "okay";
++};
++
++&i2c5 {
++	status = "okay";
++};
++
++&i2s {
++	#sound-dai-cells = <0>;
++	status = "okay";
++};
++
++&io_domains {
++	status = "okay";
++	rockchip,grf = <&grf>;
++	wifi-supply = <&vcc_18>;
++	sdcard-supply = <&vccio_sd>;
++};
++
++&sdio0 {
++	status = "okay";
++	clock-frequency = <50000000>;
++	clock-freq-min-max = <200000 50000000>;
++	bus-width = <4>;
++	cap-sd-highspeed;
++	cap-sdio-irq;
++	disable-wp;
++	keep-power-in-suspend;
++	mmc-pwrseq = <&sdio_pwrseq>;
++	non-removable;
++	num-slots = <1>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
++	sd-uhs-sdr104;
++	supports-sdio;
++
++};
++
++&pinctrl {
++	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
++		drive-strength = <8>;
++	};
++
++	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
++		bias-pull-up;
++		drive-strength = <8>;
++	};
++
++	backlight {
++		bl_en: bl-en {
++			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	buttons {
++		pwrbtn: pwrbtn {
++			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
++		};
++	};
++
++	eth_phy {
++		eth_phy_pwr: eth-phy-pwr {
++			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	pmic {
++		pmic_int: pmic-int {
++			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
++					&pcfg_pull_up>;
++		};
++
++		dvs_1: dvs-1 {
++			rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
++					&pcfg_pull_down>;
++		};
++
++		dvs_2: dvs-2 {
++			rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
++					&pcfg_pull_down>;
++		};
++	};
++
++	sdio-pwrseq {
++		wifi_enable_h: wifienable-h {
++			rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		chip_enable_h: chip-enable-h {
++			rockchip,pins = <4 27 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	sdmmc {
++		sdmmc_bus4: sdmmc-bus4 {
++			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
++					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
++					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
++					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
++		};
++
++		sdmmc_clk: sdmmc-clk {
++			rockchip,pins = <6 20 RK_FUNC_1 \
++					&pcfg_pull_none_drv_8ma>;
++		};
++
++		sdmmc_cmd: sdmmc-cmd {
++			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
++		};
++
++		sdmmc_pwr: sdmmc-pwr {
++			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	usb {
++		host_vbus_drv: host-vbus-drv {
++			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++
++		pwr_3g: pwr-3g {
++			rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++	wireless-bluetooth {
++		uart0_gpios: uart0-gpios {
++			rockchip,pins = <4 19 RK_FUNC_GPIO &pcfg_pull_none>;
++		};
++	};
++
++};
++
++&pwm0 {
++	status = "okay";
++};
++
++&saradc {
++	vref-supply = <&vcc18_ldo1>;
++	status ="okay";
++};
++
++&sdmmc {
++	bus-width = <4>;
++	cap-mmc-highspeed;
++	cap-sd-highspeed;
++	card-detect-delay = <200>;
++	disable-wp;			/* wp not hooked up */
++	pinctrl-names = "default";
++	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
++	sd-uhs-sdr12;
++	sd-uhs-sdr25;
++	sd-uhs-sdr50;
++	sd-uhs-sdr104;
++	status = "okay";
++	supports-sd;
++	vmmc-supply = <&vcc33_sd>;
++	vqmmc-supply = <&vccio_sd>;
++};
++
++&emmc {
++	bus-width = <8>;
++	cap-mmc-highspeed;
++	disable-wp;
++	non-removable;
++	num-slots = <1>;
++	pinctrl-names = "default";
++	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
++	max-frequency = <150000000>;
++	mmc-hs200-1_8v;
++	mmc-ddr-1_8v;
++	status = "okay";
++};
++
++&tsadc {
++	rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
++	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
++	status = "okay";
++};
++
++&uart0 {
++	status = "okay";
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>,  <&uart0_rts>;
++};
++
++&uart1 {
++	status = "okay";
++};
++
++&uart2 {
++	status = "okay";
++};
++
++&uart3 {
++	status = "okay";
++};
++
++&uart4 {
++	status = "okay";
++};
++
++&usbphy {
++	status = "okay";
++};
++
++&usb_host0_ehci {
++	status = "okay";
++};
++
++&usb_host1 {
++	status = "okay";
++};
++
++&usb_otg {
++	status= "okay";
++};
++
++&vopb {
++	status = "okay";
++};
++
++&vopb_mmu {
++	status = "okay";
++};
++
++&vopl {
++	status = "okay";
++};
++
++&vopl_mmu {
++	status = "okay";
++};
++
++&vpu_mmu {
++	status = "okay";
++};
++
++&vpu_service {
++	status = "okay";
++};
++
++&hevc_mmu {
++	status = "okay";
++};
++
++&hevc_service {
++	status = "okay";
++};
++
++&wdt {
++	status = "okay";
++};