Fix eMMC & leds on Beelink X2

Checked all settings individually and removed conflicting stuff. Now led behaviour as usual and able to access the and boot from eMMC

config/fex/beelinkx2.fex

@@ -16,7 +16,9 @@ machine = "Beelink X2"
 [platform]
 debug_mode = 1
 eraseflag = 1
-next_work = 2
+next_work = 3
+secure_without_OS = 1
+secure_bit = 0
 
 ;----------------------------------------------------------------------------------
 ;[target]  system bootup configuration
@@ -25,7 +27,7 @@ next_work = 2
 ;----------------------------------------------------------------------------------
 [target]
 boot_clock   	= 1008
-storage_type    = -1
+storage_type    = 2
 burn_key		= 0
 
 ;---------------------------------------------------------------------------------
@@ -42,8 +44,8 @@ keyen_flag = 0
 ; fel_key_min用于配置按键的最小键值
 ;---------------------------------------------------------------------------------
 [fel_key]
-fel_key_max            =07
+fel_key_max = 7
-fel_key_min            =02
+fel_key_min = 2
 
 ;----------------------------------------------------------------------------------
 ;card boot
@@ -60,7 +62,7 @@ fel_key_min            =02
 logical_start   = 40960
 sprite_work_delay	= 500
 sprite_err_delay	= 200
-sprite_gpio0    = port:PA15<1><default><default><default>
+sprite_gpio0    = port:PL10<1><default><default><default>
 next_work       = 3
 
 ;---------------------------------------------------------------------------------
@@ -79,7 +81,7 @@ irkey_used = 1
 pmukey_used = 1
 pmukey_num = 3
 led_power = 0
-led_state = 1
+led_state = 0
 
 ;-------------------------------------------------------------------------------
 ; 	boot阶段上电初始化GPIO
@@ -90,7 +92,7 @@ led_state = 1
 [boot_init_gpio]
 used	=	1
 gpio0	=  port:PL10<1><default><default><1>
-gpio1	=  port:PA15<1><default><default><0>
+gpio1	=  port:PG11<1><default><default><0>
 
 ;----------------------------------------------------------------------------------
 ;	used: 模块使能端     1：开启模块   0：关闭模块
@@ -98,7 +100,7 @@ gpio1	=  port:PA15<1><default><default><0>
 ;	recovery_key ： 按键配置  （例如：recovery_key= port:PH16<0><default>）
 ;----------------------------------------------------------------------------------
 [recovery_para]
-used =	0
+used = 1
 mode = 2
 recovery_key = port:PL04<0><default><default><default>
 
@@ -136,7 +138,7 @@ sdc_d5          = port:PC13<3><1><2><default>
 sdc_d6          = port:PC14<3><1><2><default>
 sdc_d7          = port:PC15<3><1><2><default>
 sdc_2xmode   	= 1
-;sdc_ddrmode		= 1
+sdc_ddrmode		= 1
 
 [twi_para]
 twi_port        = 0
@@ -154,7 +156,7 @@ force_uart_tx    = port:PF02<3><1><default><default>
 force_uart_rx    = port:PF04<3><1><default><default>
 
 [jtag_para]
-jtag_enable     = 1
+jtag_enable     = 0
 jtag_ms         = port:PA00<3><default><default><default>
 jtag_ck         = port:PA01<3><default><default><default>
 jtag_do         = port:PA02<3><default><default><default>
@@ -233,8 +235,9 @@ cpu_freq            = 48
 pll_ratio           = 0x111
 dram_selfresh_en    = 1
 dram_freq           = 36
-wakeup_src0         = port:PL03<6><default><default><0>
+wakeup_src0 		=
-wakeup_src_bt       = 
+wakeup_src_wl		= port:PG10<4><default><default><0>
+wakeup_src_bt		= port:PL03<6><default><default><0>
 
 ;----------------------------------------------------------------------------------
 ;i2c configuration
@@ -266,7 +269,7 @@ uart_tx         = port:PA04<2><1><default><default>
 uart_rx         = port:PA05<2><1><default><default>
 
 [uart1]
-uart_used       = 1
+uart_used       = 0
 uart_port       = 1
 uart_type       = 4
 uart_tx         = port:PG06<2><1><default><default>
@@ -275,7 +278,7 @@ uart_rts        = port:PG08<2><1><default><default>
 uart_cts        = port:PG09<2><1><default><default>
 
 [uart2]
-uart_used       = 1
+uart_used       = 0
 uart_port       = 2
 uart_type       = 4
 uart_tx         = port:PA00<2><1><default><default>
@@ -328,14 +331,24 @@ mode          = 0
 ;userspace gpio interface for android
 ;----------------------------------------------------------------------------------
 [gpio_para]
-gpio_used       = 1
+;gpio_used       = 0
-gpio_num        = 2
+;gpio_num        = 2
-gpio_pin_1      = port:PL10<1><default><default><1>
+;gpio_pin_1      = port:PL10<1><default><default><1>
-gpio_pin_2      = port:PA15<1><default><default><0>
+;gpio_pin_2      = port:PA15<1><default><default><0>
+;
+;[led_assign]
+;normal_led      = "gpio_pin_1"
+;standby_led     = "gpio_pin_2"
 
-[led_assign]
+;----------------------------------------------------------------------------------
-normal_led      = "gpio_pin_1"
+;sunxi led configuration
-standby_led     = "gpio_pin_2"
+;----------------------------------------------------------------------------------
+[leds_para]
+leds_used = 1
+green_led = port:PL10<1><default><default><1>
+green_led_active_low = 0
+red_led = port:PA15<1><default><default><0>
+red_led_active_low = 0
 
 ;----------------------------------------------------------------------------------
 ;thermal configuration
@@ -398,7 +411,7 @@ cooler10 = "240000 1 4294967295 0"
 [nand0_para]
 nand_support_2ch    = 0
 
-nand0_used          = 1
+nand0_used          = 0
 nand0_we            = port:PC00<2><0><1><default>
 nand0_ale           = port:PC01<2><0><1><default>
 nand0_cle           = port:PC02<2><0><1><default>
@@ -455,10 +468,10 @@ disp_init_enable         = 1
 disp_mode                = 0
 
 screen0_output_type      = 3
-screen0_output_mode      = 4
+screen0_output_mode      = 5
 
 screen1_output_type      = 3
-screen1_output_mode      = 4
+screen1_output_mode      = 5
 
 fb0_format               = 0
 fb0_width                = 0
@@ -564,12 +577,10 @@ gmac_power1        =
 ;--------------------------------------------------------------------------------
 
 [csi0]
-
 vip_used                 = 0
 vip_mode                 = 0
 vip_dev_qty              = 1
 vip_define_sensor_list   = 0
-
 vip_csi_pck              = port:PE00<2><default><default><default>
 vip_csi_mck              = port:PE01<2><default><default><default>
 vip_csi_hsync            = port:PE02<2><default><default><default>
@@ -584,7 +595,6 @@ vip_csi_d6               = port:PE10<2><default><default><default>
 vip_csi_d7               = port:PE11<2><default><default><default>
 vip_csi_sck              = port:PE12<2><default><default><default>
 vip_csi_sda              = port:PE13<2><default><default><default>
-
 vip_dev0_mname           = "ov5640"
 vip_dev0_pos             = "rear"
 vip_dev0_lane            = 1
@@ -609,12 +619,9 @@ vip_dev0_pwdn            =
 vip_dev0_flash_en        =
 vip_dev0_flash_mode      =
 vip_dev0_af_pwdn         =
-
 vip_dev0_act_used        = 0
 vip_dev0_act_name        = "ad5820_act"
 vip_dev0_act_slave       = 0x18
-
-
 vip_dev1_mname           = ""
 vip_dev1_pos             = "front"
 vip_dev1_lane            = 1
@@ -640,7 +647,6 @@ vip_dev1_flash_en        =
 vip_dev1_flash_mode      =
 vip_dev1_af_pwdn         =
 
-
 ;--------------------------------------------------------------------------------
 ;tv configuration
 ;
@@ -658,7 +664,7 @@ tvin_channel_num    =
 ;DE-Interlace configuration
 ;----------------------------------------------------------------------------------
 [di_para]
-di_used           = 1
+di_used           = 0
 
 ;--------------------------------------------------------------------------------
 ;   SDMMC PINS MAPPING                                                          |
@@ -688,7 +694,7 @@ di_used           = 1
 ;--------------------------------------------------------------------------------
 [mmc0_para]
 sdc_used          = 1
-sdc_detmode       = 1
+sdc_detmode       = 3
 sdc_buswidth      = 4
 sdc_clk           = port:PF02<2><1><2><default>
 sdc_cmd           = port:PF03<2><1><2><default>
@@ -723,7 +729,7 @@ sdc_2xmode        = 1
 sdc_ddrmode       = 1
 
 [mmc2_para]
-sdc_used          = 0
+sdc_used          = 1
 sdc_detmode       = 3
 sdc_buswidth      = 8
 sdc_clk           = port:PC05<3><1><2><default>
@@ -750,7 +756,7 @@ sdc_ddrmode       = 1
 ; sim card configuration
 ;--------------------------------------------------------------------------------
 [smc_para]
-smc_used            =
+smc_used            = 0
 smc_rst             = port:PA09<2><default><default><default>
 smc_vppen           = port:PA20<3><default><default><default>
 smc_vppp            = port:PA21<3><default><default><default>
@@ -837,7 +843,6 @@ usb_not_suspend     = 0
 vendor_id           = 0x18D1
 mass_storage_id     = 0x0001
 adb_id              = 0x0002
-
 manufacturer_name   = "USB Developer"
 product_name        = "Android"
 serial_number       = "20080411"
@@ -851,7 +856,6 @@ luns                = 3
 [serial_feature]
 serial_unique       = 0
 
-
 ;--------------------------------------------------------------------------------
 ;wifi/bt/fm/gps/nfc modules configuration
 ;module_power0: axp used by module, "axp22_dldo1" - use dldo1, not use keep it empty
@@ -902,7 +906,7 @@ wl_host_wake_invert   = 0
 ;                     0: not used, 1: used
 ;--------------------------------------------------------------------------------
 [bt_para]
-bt_used               = 1
+bt_used               = 0
 bt_uart_id            = 1
 bt_uart_baud          = 1500000
 bt_rst_n              = port:PG12<1><default><default><0>
@@ -1049,7 +1053,7 @@ ir_addr_code13       = 0xdd22
 ;ir tx--- infra remote configuration
 ;----------------------------------------------------------------------------------
 [cir]
-ir_used             = 0
+ir_used             = 1
 ir_tx               = port:PH07<2><default><default><default>
 
 
@@ -1092,15 +1096,11 @@ LV2_freq = 648000000
 LV2_volt = 1300
 
 [gpu_dvfs_table]
-
 G_LV_count = 3
-
 G_LV0_freq = 312000000
 G_LV0_volt = 1200000
-
 G_LV1_freq = 384000000
 G_LV1_volt = 1200000
-
 G_LV2_freq = 456000000
 G_LV2_volt = 1200000
 
@@ -1181,14 +1181,13 @@ s_system_power     = 50
 ;scr configuration
 ;----------------------------------------------------------------------------------
 [sim0]
-scr_used            = 1
+scr_used            = 0
 scr_vccen           = port:PA06<2><default><default><default>
 scr_slk             = port:PA07<2><default><default><default>
 scr_sda             = port:PA08<2><default><default><default>
 scr_rst             = port:PA09<2><default><default><default>
 scr_det             = port:PA10<2><default><default><default>
 
-
 ;--------------------------------------------------------------------------------
 ;tsc configuration
 ;--------------------------------------------------------------------------------
@@ -1232,7 +1231,6 @@ key3_vol				  =	666
 key4_vol				  =	857
 key5_vol				  = 2000
 
-
 ;----------------------------------------------------------------------------------
 ;display seven segment para
 ;----------------------------------------------------------------------------------