mirror of
https://github.com/Fishwaldo/build.git
synced 2025-03-17 20:31:25 +00:00
update Nano Pi Neo Plus 2(nanopineoplus2) DT (#743)
incorporate feed back from ThomasKaiser, arm-kernel list, and Kernel commit 442e1f7e Remove stuff that was incorrectly copied from Orange Pi PC2 Change white speces to tabs in the dts file add wifi power controller, mmc1, mmc2 fix typo s/orangepi/nanopi/, s/pus/plus/ usb_otg set to host mode wifi fix from brcm,bcm43xx-fmac.txt remove functions on header pins: spi, ir, ehci 1&2, ohci 1&2, uart 1&2 remove hdmi, de2, r-gpio-keys, mixer - not supported the board, reg_usb0_vbus Signed-off-by: Antony Antony <antony@phenome.org>
This commit is contained in:
parent
d3180af7bc
commit
66a3269524
1 changed files with 102 additions and 98 deletions
|
@ -8,15 +8,14 @@ index b296f10..f361a2a 100644
|
|||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
|
||||
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
|
||||
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopim1plus2.dtb
|
||||
|
||||
always := $(dtb-y)
|
||||
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
|
||||
new file mode 100644
|
||||
index 0000000..93df9fd
|
||||
index 0000000..f86db28
|
||||
--- /dev/null
|
||||
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
|
||||
@@ -0,0 +1,256 @@
|
||||
@@ -0,0 +1,260 @@
|
||||
+/*
|
||||
+ * Copyright (C) 2017 Antony Antony <antony@phenome.org>
|
||||
+ * Copyright (C) 2016 ARM Ltd.
|
||||
+ *
|
||||
+ * This file is dual-licensed: you can use it either under the terms
|
||||
|
@ -67,7 +66,7 @@ index 0000000..93df9fd
|
|||
+
|
||||
+/ {
|
||||
+ model = "FriendlyARM NanoPi NEO Plus2";
|
||||
+ compatible = "friendlyarm,nanopi-neo-pus2", "allwinner,sun50i-h5";
|
||||
+ compatible = "friendlyarm,nanopi-neo-plus2", "allwinner,sun50i-h5";
|
||||
+
|
||||
+ reg_vcc3v3: vcc3v3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
|
@ -89,29 +88,21 @@ index 0000000..93df9fd
|
|||
+ compatible = "gpio-leds";
|
||||
+
|
||||
+ pwr {
|
||||
+ label = "orangepi:green:pwr";
|
||||
+ label = "nanopi:green:pwr";
|
||||
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
|
||||
+ default-state = "on";
|
||||
+ };
|
||||
+
|
||||
+ status {
|
||||
+ label = "orangepi:red:status";
|
||||
+ label = "nanopi:red:status";
|
||||
+ gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ r-gpio-keys {
|
||||
+ compatible = "gpio-keys";
|
||||
+
|
||||
+ sw4 {
|
||||
+ label = "sw4";
|
||||
+ linux,code = <BTN_0>;
|
||||
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ reg_gmac_3v3: gmac-3v3 {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&gmac_power_pin_nanopi>;
|
||||
+ regulator-name = "gmac-3v3";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
|
@ -120,14 +111,32 @@ index 0000000..93df9fd
|
|||
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ reg_usb0_vbus: usb0-vbus {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "usb0-vbus";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ enable-active-high;
|
||||
+ gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
|
||||
+ status = "okay";
|
||||
+ vdd_cpux: gpio-regulator {
|
||||
+ compatible = "regulator-gpio";
|
||||
+
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&vdd_cpux_r_npi>;
|
||||
+
|
||||
+ regulator-name = "vdd-cpux";
|
||||
+ regulator-type = "voltage";
|
||||
+ regulator-boot-on;
|
||||
+ regulator-always-on;
|
||||
+ regulator-min-microvolt = <1100000>;
|
||||
+ regulator-max-microvolt = <1300000>;
|
||||
+ regulator-ramp-delay = <50>; /* 4ms */
|
||||
+
|
||||
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
|
||||
+ gpios-states = <0x1>;
|
||||
+ states = <1100000 0x0
|
||||
+ 1300000 0x1>;
|
||||
+ };
|
||||
+
|
||||
+ wifi_pwrseq: wifi_pwrseq {
|
||||
+ compatible = "mmc-pwrseq-simple";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&wifi_en_npi>;
|
||||
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
|
||||
+ post-power-on-delay-ms = <200>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
|
@ -139,22 +148,10 @@ index 0000000..93df9fd
|
|||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&de {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ehci0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ehci1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ehci2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ehci3 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
|
@ -168,16 +165,6 @@ index 0000000..93df9fd
|
|||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&hdmi {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ir {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&ir_pins_a>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&mdio {
|
||||
+ ext_rgmii_phy: ethernet-phy@7 {
|
||||
+ compatible = "ethernet-phy-ieee802.3-c22";
|
||||
|
@ -185,10 +172,6 @@ index 0000000..93df9fd
|
|||
+ };
|
||||
+};
|
||||
+
|
||||
+&mixer0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&mmc0 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
|
||||
|
@ -198,49 +181,81 @@ index 0000000..93df9fd
|
|||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&mmc1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&mmc1_pins_a>;
|
||||
+ vmmc-supply = <®_vcc3v3>;
|
||||
+ vqmmc-supply = <®_vcc3v3>;
|
||||
+ mmc-pwrseq = <&wifi_pwrseq>;
|
||||
+ bus-width = <4>;
|
||||
+ non-removable;
|
||||
+ boot_device = <0>;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ /*
|
||||
+ * WiFi driver support could be incomplete,
|
||||
+ * wlan0 is able to see Base Stations, however not able to join.
|
||||
+ */
|
||||
+ brcmf: wifi@1 {
|
||||
+ reg = <1>;
|
||||
+ compatible = "brcm,bcm4329-fmac";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&mmc2 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&mmc2_8bit_pins>;
|
||||
+ vmmc-supply = <®_vcc3v3>;
|
||||
+ bus-width = <8>;
|
||||
+ non-removable;
|
||||
+ cap-mmc-hw-reset;
|
||||
+ boot_device = <0>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&mmc2_8bit_pins {
|
||||
+ /* Increase drive strength for DDR modes */
|
||||
+ drive-strength = <40>;
|
||||
+ /* eMMC is missing pull-ups */
|
||||
+ bias-pull-up;
|
||||
+};
|
||||
+
|
||||
+&ohci0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ohci1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ohci2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ohci3 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&tcon0 {
|
||||
+ status = "okay";
|
||||
+&pio {
|
||||
+ leds_npi: led_pins@0 {
|
||||
+ pins = "PA10";
|
||||
+ function = "gpio_out";
|
||||
+ };
|
||||
+ gmac_power_pin_nanopi: gmac_power_pin@0 {
|
||||
+ pins = "PD6";
|
||||
+ function = "gpio_out";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&spi0 {
|
||||
+ status = "okay";
|
||||
+ spi-flash@0 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ compatible = "jedec,spi-nor";
|
||||
+ reg = <0>; /* Chip select 0 */
|
||||
+ spi-max-frequency = <10000000>;
|
||||
+ status = "okay";
|
||||
+ partitions {
|
||||
+ compatible = "fixed-partitions";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ partition@0 {
|
||||
+ label = "uboot";
|
||||
+ reg = <0x0 0x100000>;
|
||||
+ };
|
||||
+ partition@100000 {
|
||||
+ label = "env";
|
||||
+ reg = <0x100000 0x100000>;
|
||||
+ };
|
||||
+ };
|
||||
+ };
|
||||
+&r_pio {
|
||||
+ leds_r_npi: led_pins@0 {
|
||||
+ pins = "PL10";
|
||||
+ function = "gpio_out";
|
||||
+ };
|
||||
+
|
||||
+ vdd_cpux_r_npi: regulator_pins@0 {
|
||||
+ allwinner,pins = "PL6";
|
||||
+ allwinner,function = "gpio_out";
|
||||
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
+ };
|
||||
+
|
||||
+ wifi_en_npi: wifi_en_pin {
|
||||
+ pins = "PL7";
|
||||
+ function = "gpio_out";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&uart0 {
|
||||
|
@ -249,26 +264,15 @@ index 0000000..93df9fd
|
|||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart1_pins>;
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&uart2 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart2_pins>;
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&usb_otg {
|
||||
+ dr_mode = "otg";
|
||||
+ dr_mode = "host";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usbphy {
|
||||
+ /* USB Type-A ports' VBUS is always on */
|
||||
+ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
|
||||
+ usb0_vbus-supply = <®_usb0_vbus>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
--
|
||||
2.9.3
|
||||
|
|
Loading…
Add table
Reference in a new issue