diff --git a/bin/firmware-overlay/brcm/bcm43438-sdio.hcd b/bin/firmware-overlay/brcm/bcm43438-sdio.hcd new file mode 100644 index 000000000..1fc806e65 Binary files /dev/null and b/bin/firmware-overlay/brcm/bcm43438-sdio.hcd differ diff --git a/bin/firmware-overlay/brcm/brcmfmac43430-sdio.bin b/bin/firmware-overlay/brcm/brcmfmac43430-sdio.bin index 99d951f0d..59972d561 100644 Binary files a/bin/firmware-overlay/brcm/brcmfmac43430-sdio.bin and b/bin/firmware-overlay/brcm/brcmfmac43430-sdio.bin differ diff --git a/bin/firmware-overlay/brcm/brcmfmac43430-sdio.txt b/bin/firmware-overlay/brcm/brcmfmac43430-sdio.txt new file mode 100644 index 000000000..8f0bf6906 --- /dev/null +++ b/bin/firmware-overlay/brcm/brcmfmac43430-sdio.txt @@ -0,0 +1,54 @@ +#AP6212_NVRAM_V1.0_20140603 +# 2.4 GHz, 20 MHz BW mode + +# The following parameter values are just placeholders, need to be updated. +manfid=0x2d0 +prodid=0x0726 +vendid=0x14e4 +devid=0x43e2 +boardtype=0x0726 +boardrev=0x1101 +boardnum=22 +macaddr=00:90:4c:c5:12:38 +sromrev=11 +boardflags=0x00404201 +xtalfreq=26000 +nocrc=1 +ag0=255 +aa2g=1 +ccode=ALL + +pa0itssit=0x20 +extpagain2g=0 + +#PA parameters for 2.4GHz, measured at CHIP OUTPUT +pa2ga0=-168,7161,-820 +AvVmid_c0=0x0,0xc8 +cckpwroffset0=5 + +# PPR params +maxp2ga0=90 +txpwrbckof=6 +cckbw202gpo=0x5555 +legofdmbw202gpo=0x77777777 +mcsbw202gpo=0xaaaaaaaa + +# OFDM IIR : +ofdmdigfilttype=7 +# PAPD mode: +papdmode=2 + +il0macaddr=00:90:4c:c5:12:38 +wl0id=0x431b + +#OOB parameters +hostwake=0x40 +hostrdy=0x41 +usbrdy=0x03 +usbrdydelay=100 +deadman_to=0xffffffff +# muxenab: 0x1 for UART enable, 0x10 for Host awake +muxenab=0x10 +# CLDO PWM voltage settings - 0x4 - 1.1 volt +#cldo_pwm=0x4 + diff --git a/bin/firmware-overlay/brcm/config.txt b/bin/firmware-overlay/brcm/config.txt index ede140bf2..59b968247 100644 --- a/bin/firmware-overlay/brcm/config.txt +++ b/bin/firmware-overlay/brcm/config.txt @@ -1,3 +1,4 @@ +PM=0 nv_by_chip=1 \ 43362 1 nvram_ap6210.txt 43430 0 nvram_ap6212.txt