diff --git a/patch/kernel/mvebu-next/add-helios4.patch b/patch/kernel/mvebu-next/add-helios4.patch deleted file mode 100644 index 7da28c9c9..000000000 --- a/patch/kernel/mvebu-next/add-helios4.patch +++ /dev/null @@ -1,357 +0,0 @@ -diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile -index eff87a3..3efb92f ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -1028,6 +1028,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \ - armada-385-linksys-rango.dtb \ - armada-385-linksys-shelby.dtb \ - armada-385-synology-ds116.dtb \ -+ armada-388-helios4.dtb \ - armada-385-turris-omnia.dtb \ - armada-388-clearfog.dtb \ - armada-388-clearfog-base.dtb \ -diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts -new file mode 100644 -index 0000000..4edb552 ---- /dev/null -+++ b/arch/arm/boot/dts/armada-388-helios4.dts -@@ -0,0 +1,339 @@ -+/* -+ * Device Tree file for Helios-4 -+ * based on SolidRun Clearfog revision A1 rev 2.0 (88F6828) -+ * -+ * Copyright (C) 2017 -+ * -+ */ -+ -+/dts-v1/; -+#include "armada-388.dtsi" -+#include "armada-38x-solidrun-microsom.dtsi" -+ -+/ { -+ model = "Helios4"; -+ compatible = "marvell,armada388", -+ "marvell,armada385", "marvell,armada380"; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x40000000>; /* 1 GB */ -+ }; -+ -+ aliases { -+ /* So that mvebu u-boot can update the MAC addresses */ -+ ethernet1 = ð0; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ reg_12v: regulator-12v { -+ compatible = "regulator-fixed"; -+ regulator-name = "power_brick_12V"; -+ regulator-min-microvolt = <12000000>; -+ regulator-max-microvolt = <12000000>; -+ regulator-always-on; -+ }; -+ -+ reg_3p3v: regulator-3p3v { -+ compatible = "regulator-fixed"; -+ regulator-name = "3P3V"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ vin-supply = <®_12v>; -+ }; -+ -+ reg_5p0v_hdd: regulator-5v-hdd { -+ compatible = "regulator-fixed"; -+ regulator-name = "5V_HDD"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-always-on; -+ vin-supply = <®_12v>; -+ }; -+ -+ reg_5p0v_usb: regulator-5v-usb { -+ compatible = "regulator-fixed"; -+ regulator-name = "USB-PWR"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ regulator-boot-on; -+ regulator-always-on; -+ enable-active-high; -+ gpio = <&expander0 6 GPIO_ACTIVE_HIGH>; -+ vin-supply = <®_12v>; -+ }; -+ -+ gpio-keys { -+ compatible = "gpio-keys"; -+ pinctrl-0 = <&user_button_pins>; -+ pinctrl-names = "default"; -+ -+ button_0 { -+ label = "User Button"; -+ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; -+ linux,can-disable; -+ linux,code = ; -+ }; -+ }; -+ -+ system-leds { -+ compatible = "gpio-leds"; -+ status-led { -+ label = "helios4:green:status"; -+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "heartbeat"; -+ default-state = "on"; -+ }; -+ -+ fault-led { -+ label = "helios4:red:fault"; -+ gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; -+ default-state = "keep"; -+ }; -+ }; -+ -+ io-leds { -+ compatible = "gpio-leds"; -+ sata1-led { -+ label = "helios4:green:ata1"; -+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "ata1"; -+ default-state = "off"; -+ }; -+ sata2-led { -+ label = "helios4:green:ata2"; -+ gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "ata2"; -+ default-state = "off"; -+ }; -+ sata3-led { -+ label = "helios4:green:ata3"; -+ gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "ata3"; -+ default-state = "off"; -+ }; -+ sata4-led { -+ label = "helios4:green:ata4"; -+ gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "ata4"; -+ default-state = "off"; -+ }; -+ usb-led { -+ label = "helios4:green:usb"; -+ gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "usb-host"; -+ default-state = "off"; -+ }; -+ }; -+ -+ fan1: j10-pwm { -+ compatible = "pwm-fan"; -+ pwms = <&gpio1 9 3000>; -+ }; -+ -+ fan2: j17-pwm { -+ compatible = "pwm-fan"; -+ pwms = <&gpio1 4 4500>; -+ }; -+ -+ usb2_phy: usb2-phy { -+ compatible = "usb-nop-xceiv"; -+ vbus-regulator = <®_5p0v_usb>; -+ }; -+ -+ usb3_phy: usb3-phy { -+ compatible = "usb-nop-xceiv"; -+ //vbus-regulator = <®_5p0v_usb>; -+ }; -+ -+ soc { -+ internal-regs { -+ i2c@11000 { -+ clock-frequency = <100000>; -+ pinctrl-0 = <&i2c0_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ /* -+ * PCA9655 GPIO expander, up to 1MHz clock. -+ * 0-Board Revision bit 0 # -+ * 1-Board Revision bit 1 # -+ * 5-USB3 overcurrent -+ * 6-USB3 power -+ */ -+ expander0: gpio-expander@20 { -+ /* -+ * This is how it should be: -+ * compatible = "onnn,pca9655", -+ * "nxp,pca9555"; -+ * but you can't do this because of -+ * the way I2C works. -+ */ -+ compatible = "nxp,pca9555"; -+ gpio-controller; -+ #gpio-cells = <2>; -+ reg = <0x20>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pca0_pins>; -+ interrupt-parent = <&gpio0>; -+ interrupts = <18 IRQ_TYPE_EDGE_FALLING>; -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ -+ board_rev_bit_0 { -+ gpio-hog; -+ gpios = <0 GPIO_ACTIVE_LOW>; -+ input; -+ line-name = "board-rev-0"; -+ }; -+ board_rev_bit_1 { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_LOW>; -+ input; -+ line-name = "board-rev-1"; -+ }; -+ usb3_ilimit { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "usb-overcurrent-status"; -+ }; -+ }; -+ -+ temp_sensor: temp@4c { -+ compatible = "ti,lm75"; -+ reg = <0x4c>; -+ vcc-supply = <®_3p3v>; -+ }; -+ -+ /* What device at 0x64 ? */ -+ }; -+ -+ i2c@11100 { -+ /* -+ * External I2C Bus for user peripheral -+ */ -+ clock-frequency = <400000>; -+ pinctrl-0 = <&helios_i2c1_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ }; -+ -+ sata@a8000 { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sata0: sata-port@0 { -+ reg = <0>; -+ }; -+ -+ sata1: sata-port@1 { -+ reg = <1>; -+ }; -+ }; -+ -+ sata@e0000 { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sata2: sata-port@0 { -+ reg = <0>; -+ }; -+ -+ sata3: sata-port@1 { -+ reg = <1>; -+ }; -+ }; -+ -+ spi@10680 { -+ pinctrl-0 = <&spi1_pins -+ µsom_spi1_cs_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ spi-flash@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "w25q32", "jedec,spi-nor"; -+ reg = <0>; /* Chip select 0 */ -+ spi-max-frequency = <104000000>; -+ spi-cpha; -+ status = "okay"; -+ }; -+ }; -+ -+ sdhci@d8000 { -+ bus-width = <4>; -+ cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; -+ no-1-8-v; -+ pinctrl-0 = <&helios_sdhci_pins -+ &helios_sdhci_cd_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ vmmc = <®_3p3v>; -+ wp-inverted; -+ }; -+ -+ usb@58000 { -+ //vcc-supply = <®_5p0v_usb>; -+ usb-phy = <&usb2_phy>; -+ status = "okay"; -+ }; -+ -+ usb3@f0000 { -+ status = "okay"; -+ }; -+ -+ usb3@f8000 { -+ status = "okay"; -+ }; -+ -+ pinctrl@18000 { -+ pca0_pins: pca0_pins { -+ marvell,pins = "mpp18"; -+ marvell,function = "gpio"; -+ }; -+ helios_i2c1_pins: i2c1-pins { -+ marvell,pins = "mpp26", "mpp27"; -+ marvell,function = "i2c1"; -+ }; -+ helios_sdhci_cd_pins: helios-sdhci-cd-pins { -+ marvell,pins = "mpp20"; -+ marvell,function = "gpio"; -+ }; -+ helios_sdhci_pins: helios-sdhci-pins { -+ marvell,pins = "mpp21", "mpp28", -+ "mpp37", "mpp38", -+ "mpp39", "mpp40"; -+ marvell,function = "sd0"; -+ }; -+ helios_led_pins: helios-led-pins { -+ marvell,pins = "mpp24", "mpp25", -+ "mpp49", "mpp50", -+ "mpp52", "mpp53", -+ "mpp54"; -+ marvell,function = "gpio"; -+ }; -+ helios_fan_pins: helios-fan-pins { -+ marvell,pins = "mpp41", "mpp43", -+ "mpp48", "mpp55"; -+ marvell,function = "gpio"; -+ }; -+ microsom_spi1_cs_pins: spi1-cs-pins { -+ marvell,pins = "mpp59"; -+ marvell,function = "spi1"; -+ }; -+ user_button_pins: user-button-pins { -+ marvell,pins = "mpp23"; -+ marvell,function = "gpio"; -+ }; -+ }; -+ }; -+ }; -+};