switch to 5.4.y

2025-07-07 21:48:53 +00:00 · 2019-11-25 19:51:06 -05:00 · 2019-11-25 19:51:06 -05:00 · aafb70a9a3
commit aafb70a9a3
parent 1a4c152fc6
189 changed files with 1212088 additions and 222 deletions
--- a/config/sources/families/include/sunxi64_common.inc
+++ b/config/sources/families/include/sunxi64_common.inc
@ -14,13 +14,22 @@ case $BRANCH in
 	;;
-	dev|current)
+	current)
 		KERNELSOURCE="https://github.com/megous/linux"
 		KERNELBRANCH="branch:orange-pi-5.3"
 		KERNELPATCHDIR='sunxi-'$BRANCH
 	;;
 	dev)
 		BOOTBRANCH='tag:v2019.10'
 		KERNELSOURCE="https://github.com/megous/linux"
 		KERNELBRANCH="branch:orange-pi-5.4"
 		KERNELPATCHDIR='sunxi-'$BRANCH
 	;;
 esac
 family_tweaks()
--- a/config/sources/families/include/sunxi_common.inc
+++ b/config/sources/families/include/sunxi_common.inc
@ -16,13 +16,22 @@ case $BRANCH in
 	;;
-	dev|current)
+	current)
 		KERNELSOURCE="https://github.com/megous/linux"
 		KERNELBRANCH="branch:orange-pi-5.3"
 		KERNELPATCHDIR='sunxi-dev'
 	;;
 	dev)
 		BOOTBRANCH='tag:v2019.10'
 		KERNELSOURCE="https://github.com/megous/linux"
 		KERNELBRANCH="branch:orange-pi-5.4"
 		KERNELPATCHDIR='sunxi-dev'
 	;;
 esac
 family_tweaks()
--- a/patch/kernel/sunxi-dev
+++ b/patch/kernel/sunxi-dev
@ -1 +0,0 @@
 sunxi-current
--- a/patch/kernel/sunxi-dev/0000-axp-adjustements.patch.disabled
+++ b/patch/kernel/sunxi-dev/0000-axp-adjustements.patch.disabled
@ -0,0 +1,229 @@
 diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
 index 44097a3e0..a0cbdbb2c 100644
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
@@ -756,6 +756,14 @@ config LEDS_NIC78BX
 	  To compile this driver as a module, choose M here: the module
 	  will be called leds-nic78bx.
 +config LEDS_AXP20X
 +	tristate "LED support for AXP20X-like PMICs (AXP813, ...)"
 +	depends on LEDS_CLASS && MFD_AXP20X
 +	help
 +	  This option enables support for on-chip LED drivers on
 +	  AXP20X-like PMICs.
 +
 +
 comment "LED Triggers"
 source "drivers/leds/trigger/Kconfig"
 diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
 index 420b5d2cf..a8149fb6e 100644
 --- a/drivers/leds/Makefile
 +++ b/drivers/leds/Makefile
@@ -78,6 +78,7 @@ obj-$(CONFIG_LEDS_MT6323)		+= leds-mt6323.o
 obj-$(CONFIG_LEDS_LM3692X)		+= leds-lm3692x.o
 obj-$(CONFIG_LEDS_SC27XX_BLTC)		+= leds-sc27xx-bltc.o
 obj-$(CONFIG_LEDS_LM3601X)		+= leds-lm3601x.o
 +obj-$(CONFIG_LEDS_AXP20X)		+= leds-axp20x.o
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_CR0014114)		+= leds-cr0014114.o
 diff --git a/drivers/leds/leds-axp20x.c b/drivers/leds/leds-axp20x.c
 new file mode 100644
 index 000000000..de33c1d83
 --- /dev/null
 +++ b/drivers/leds/leds-axp20x.c
@@ -0,0 +1,138 @@
 +/*
 + * LED Driver for X-Powers AXP813 PMIC.
 + *
 + * Copyright(c) 2017 Ondrej Jirman <megous@megous.com>
 + *
 + * This program is free software; you can redistribute  it and/or modify it
 + * under  the terms of  the GNU General  Public License as published by the
 + * Free Software Foundation;  either version 2 of the  License, or (at your
 + * option) any later version.
 + */
 +
 +#include <linux/module.h>
 +#include <linux/kernel.h>
 +#include <linux/platform_device.h>
 +#include <linux/leds.h>
 +#include <linux/slab.h>
 +#include <linux/of.h>
 +#include <linux/of_device.h>
 +#include <linux/mfd/axp20x.h>
 +
 +#define AXP813_CHGLED_CTRL_MASK		BIT(3)
 +#define AXP813_CHGLED_CTRL_CHARGER	BIT(3)
 +#define AXP813_CHGLED_CTRL_USER		0
 +
 +#define AXP813_CHGLED_USER_STATE_MASK		GENMASK(5, 4)
 +#define AXP813_CHGLED_USER_STATE_OFFSET		4
 +#define AXP813_CHGLED_USER_STATE_OFF		0
 +#define AXP813_CHGLED_USER_STATE_BLINK_SLOW	1
 +#define AXP813_CHGLED_USER_STATE_BLINK_FAST	2
 +#define AXP813_CHGLED_USER_STATE_ON		3
 +
 +struct axp20x_led {
 +	struct led_classdev cdev;
 +	struct regmap *regmap;
 +};
 +
 +static int axp20x_led_set(struct led_classdev *led_cdev,
 +			   enum led_brightness value)
 +{
 +	struct axp20x_led *led =
 +			container_of(led_cdev, struct axp20x_led, cdev);
 +	unsigned int val;
 +
 +	val = value == LED_OFF ? AXP813_CHGLED_USER_STATE_OFF :
 +		AXP813_CHGLED_USER_STATE_ON;
 +
 +	return regmap_update_bits(led->regmap, AXP20X_OFF_CTRL,
 +				  AXP813_CHGLED_USER_STATE_MASK,
 +				  val << AXP813_CHGLED_USER_STATE_OFFSET);
 +
 +}
 +
 +static int axp20x_led_probe(struct platform_device *pdev)
 +{
 +	struct axp20x_dev *axp20x;
 +	struct axp20x_led *led;
 +	int ret;
 +
 +	if (!of_device_is_available(pdev->dev.of_node))
 +		return -ENODEV;
 +
 +	axp20x = dev_get_drvdata(pdev->dev.parent);
 +	if (!axp20x)
 +		return -EINVAL;
 +
 +	led = devm_kzalloc(&pdev->dev,
 +			   sizeof(struct axp20x_led),
 +			   GFP_KERNEL);
 +	if (!led)
 +		return -ENOMEM;
 +
 +	led->regmap = axp20x->regmap;
 +
 +	led->cdev.name = "chgled";
 +	led->cdev.brightness_set_blocking = axp20x_led_set;
 +	led->cdev.brightness = LED_OFF;
 +	led->cdev.max_brightness = 1;
 +
 +	ret = led_classdev_register(pdev->dev.parent, &led->cdev);
 +	if (ret) {
 +		dev_err(&pdev->dev, "Failed to register led %s\n",
 +			led->cdev.name);
 +		return ret;
 +	}
 +
 +	ret = regmap_update_bits(led->regmap, AXP20X_OFF_CTRL,
 +				 AXP813_CHGLED_CTRL_MASK,
 +				 AXP813_CHGLED_CTRL_USER);
 +	if (ret) {
 +		dev_err(&pdev->dev, "Failed to enable user cnotrol\n");
 +	}
 +
 +	ret = axp20x_led_set(&led->cdev, led->cdev.brightness);
 +	if (ret) {
 +		dev_err(&pdev->dev, "Failed to init led %s\n",
 +			led->cdev.name);
 +	}
 +
 +	platform_set_drvdata(pdev, led);
 +	return 0;
 +}
 +
 +static int axp20x_led_remove(struct platform_device *pdev)
 +{
 +	struct axp20x_led *led = platform_get_drvdata(pdev);
 +
 +	axp20x_led_set(&led->cdev, LED_OFF);
 +
 +	regmap_update_bits(led->regmap, AXP20X_OFF_CTRL,
 +			   AXP813_CHGLED_CTRL_MASK,
 +			   AXP813_CHGLED_CTRL_CHARGER);
 +
 +	led_classdev_unregister(&led->cdev);
 +
 +	return 0;
 +}
 +
 +static const struct of_device_id axp20x_leds_of_match[] = {
 +	{ .compatible = "x-powers,axp813-leds", },
 +	{ },
 +};
 +MODULE_DEVICE_TABLE(of, axp20x_leds_of_match);
 +
 +static struct platform_driver axp20x_led_driver = {
 +	.driver		= {
 +		.name	= "axp20x-leds",
 +		.of_match_table = axp20x_leds_of_match,
 +	},
 +	.probe		= axp20x_led_probe,
 +	.remove		= axp20x_led_remove,
 +};
 +
 +module_platform_driver(axp20x_led_driver);
 +
 +MODULE_AUTHOR("Ondrej Jirman <megous@megous.com>");
 +MODULE_DESCRIPTION("LED driver for AXP813 PMIC");
 +MODULE_LICENSE("GPL");
 +MODULE_ALIAS("platform:leds-axp20x");
 diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
 index 0be511dd9..a9bdf3cdd 100644
 --- a/drivers/mfd/axp20x.c
 +++ b/drivers/mfd/axp20x.c
@@ -24,6 +24,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 +#include <linux/regulator/userspace-consumer.h>
 #include <linux/mfd/axp20x.h>
 #include <linux/mfd/core.h>
 #include <linux/of_device.h>
@@ -130,6 +131,7 @@ static const struct regmap_range axp288_volatile_ranges[] = {
 	regmap_reg_range(AXP288_BC_GLOBAL, AXP288_BC_GLOBAL),
 	regmap_reg_range(AXP288_BC_DET_STAT, AXP288_BC_DET_STAT),
 	regmap_reg_range(AXP20X_CHRG_BAK_CTRL, AXP20X_CHRG_BAK_CTRL),
 +	regmap_reg_range(AXP22X_CHRG_CTRL3, AXP22X_CHRG_CTRL3),
 	regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IPSOUT_V_HIGH_L),
 	regmap_reg_range(AXP20X_TIMER_CTRL, AXP20X_TIMER_CTRL),
 	regmap_reg_range(AXP22X_GPIO_STATE, AXP22X_GPIO_STATE),
@@ -762,6 +764,16 @@ static const struct mfd_cell axp809_cells[] = {
 	},
 };
 +static struct regulator_bulk_data vcc_vb = {
 +	.supply = "vcc-vb",
 +};
 +
 +static struct regulator_userspace_consumer_data vcc_vb_data = {
 +	.name = "vcc-vb",
 +	.num_supplies = 1,
 +	.supplies = &vcc_vb,
 +};
 +
 static const struct mfd_cell axp813_cells[] = {
 	{
 		.name			= "axp221-pek",
@@ -778,6 +790,16 @@ static const struct mfd_cell axp813_cells[] = {
 	}, {
 		.name		= "axp20x-battery-power-supply",
 		.of_compatible	= "x-powers,axp813-battery-power-supply",
 +	}, {
 +		.name			= "axp20x-usb-power-supply",
 +		.of_compatible		= "x-powers,axp813-usb-power-supply",
 +	}, {
 +		.name			= "axp20x-leds",
 +		.of_compatible		= "x-powers,axp813-leds",
 +	}, {
 +		.name			= "reg-userspace-consumer",
 +		.platform_data		= &vcc_vb_data,
 +		.pdata_size		= sizeof(vcc_vb_data),
 	},
 };
--- a/patch/kernel/sunxi-dev/0000-sound-soc-ac100-codec-Initial-implementation.patch.disabled
+++ b/patch/kernel/sunxi-dev/0000-sound-soc-ac100-codec-Initial-implementation.patch.disabled
@ -0,0 +1,346 @@
 From 6eb4890e1b83490864f18d3926182069e54a4dfb Mon Sep 17 00:00:00 2001
 From: Ondrej Jirman <megous@megous.com>
 Date: Sun, 12 Nov 2017 23:09:14 +0100
 Subject: [PATCH] sound: soc: ac100-codec: Initial implementation
 This driver provides AC100 codec controls.
 Note: This does not yet provide anything, it's just a skeleton
 for a future driver.
 Signed-off-by: Ondrej Jirman <megous@megous.com>
 ---
 sound/soc/sunxi/Kconfig       |  11 ++
 sound/soc/sunxi/Makefile      |   1 +
 sound/soc/sunxi/ac100-codec.c | 291 ++++++++++++++++++++++++++++++++++
 3 files changed, 303 insertions(+)
 create mode 100644 sound/soc/sunxi/ac100-codec.c
 diff --git a/sound/soc/sunxi/Kconfig b/sound/soc/sunxi/Kconfig
 index 22408bc2d6ec6..e276cc94a8c5e 100644
 --- a/sound/soc/sunxi/Kconfig
 +++ b/sound/soc/sunxi/Kconfig
@@ -20,6 +20,17 @@ config SND_SUN8I_CODEC
 	  Say Y or M if you want to add sun8i digital audio codec support.
 +config SND_AC100_CODEC
 +	tristate "Allwinner (X-Powers) AC100 audio codec"
 +	depends on OF
 +	depends on MACH_SUN8I || COMPILE_TEST
 +	select REGMAP_MMIO
 +	help
 +	  This option enables the audio codec support for Allwinner (X-Powers)
 +	  AC100 chip.
 +
 +	  Say Y or M if you want to add AC100 audio codec support.
 +
 config SND_SUN8I_CODEC_ANALOG
 	tristate "Allwinner sun8i Codec Analog Controls Support"
 	depends on MACH_SUN8I || (ARM64 && ARCH_SUNXI) || COMPILE_TEST
 diff --git a/sound/soc/sunxi/Makefile b/sound/soc/sunxi/Makefile
 index 4a9ef67386caf..83461fdbfaa2a 100644
 --- a/sound/soc/sunxi/Makefile
 +++ b/sound/soc/sunxi/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_SND_SUN4I_I2S) += sun4i-i2s.o
 obj-$(CONFIG_SND_SUN4I_SPDIF) += sun4i-spdif.o
 obj-$(CONFIG_SND_SUN8I_CODEC_ANALOG) += sun8i-codec-analog.o
 obj-$(CONFIG_SND_SUN8I_CODEC) += sun8i-codec.o
 +obj-$(CONFIG_SND_AC100_CODEC) += ac100-codec.o
 diff --git a/sound/soc/sunxi/ac100-codec.c b/sound/soc/sunxi/ac100-codec.c
 new file mode 100644
 index 0000000000000..d5438815be754
 --- /dev/null
 +++ b/sound/soc/sunxi/ac100-codec.c
@@ -0,0 +1,291 @@
 +/*
 + * This driver supports the controls for X-Powers (Allwinner)
 + * AC100 audio codec. This codec is co-packaged with AXP81x PMICs.
 + *
 + * (C) Copyright 2017 Ondrej Jirman <megous@megous.com>
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of the GNU General Public License as published by
 + * the Free Software Foundation; either version 2 of the License, or
 + * (at your option) any later version.
 + *
 + * This program is distributed in the hope that it will be useful,
 + * but WITHOUT ANY WARRANTY; without even the implied warranty of
 + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 + * GNU General Public License for more details.
 + */
 +
 +#include <linux/module.h>
 +#include <linux/delay.h>
 +#include <linux/clk.h>
 +#include <linux/io.h>
 +#include <linux/pm_runtime.h>
 +#include <linux/regmap.h>
 +#include <linux/mfd/ac100.h>
 +
 +#include <sound/pcm_params.h>
 +#include <sound/soc.h>
 +#include <sound/soc-dapm.h>
 +
 +/*
 + * Reasearch
 + * ---------
 + *
 + * Features:
 + * 2 A/D
 + * 2 D/A
 + * 2 I2S/PCM #1 and #2
 + * 1 PCM mono #3 muxable with I2S #2
 + * 3 mic inputs (mic #2 and #3 exclusively muxable at input)
 + * 1 line in (directly or through amp)
 + * 1 aux input
 + * all input signals mixable directly into output (bypass AD/DA)
 + *
 + * outputs:
 + * HPOUTL     - headphone left
 + * HPOUTR     - headphone right
 + * LINEOUT    - line out differential
 + * EAROUT     - earpeiece differential
 + * SPKOUT1    - SPOL left speaker differnetial
 + * SPKOUT2    - SPOR right speaker differnetial
 + *
 + * Power up:
 + * LDOIN      - 1.5-3.3V external power
 + * AVCC       - analog power 3V
 + * CPVDD      - 1.8V
 + * VDD-IO1    - power for I2S #1 and #2   1.8/3V
 + * VDD-IO2    - power for I2S #3  1.8/3V
 + * VCC-RTC    - power for RTC 1.8/3V
 + *
 + * Clocks: page 28
 + * SYSCLK must be 24576000 Hz (48kHz) or 22579200 Hz (44.1kHz)
 + *   - Source I2S1CLK/MCLK1
 + *   - If SRC# module is used SYSCLK must be generated by PLL
 + *   
 + * A/D:
 + * ADC_APC_CTRL B15 B11 enable/disable A/D to save power
 + * ADC_APC_CTRL B14-12 B10-8 volume control for A/D
 + * ADC_DIG_CTRL B15 enable/disable digital A/D to save power
 + * ADDA_FS_I2S1 ADDA_FS_I2S2 - select sample rate
 + *
 + * D/A:
 + * OMIXER_DACA_CTRL B15-14  enable/disable D/A channels
 + * DAC_DIG_CTRL B15 enable/disable digital D/A
 + *
 + * Mixer:
 + * - 2 channels DAC Output mixers
 + *   - inputs:
 + *      - LINEINL/R
 + *      - AXIL/R
 + *      - MIC1P/N,MIC2P/N
 + *      - Stereo DAC output
 + * - 2 channels ADC Record mixers   
 + *   - inputs:
 + *      - LINEINL/R
 + *      - AXIL/R
 + *      - MIC1P/N,MIC2P/N
 + *      - Stereo DAC output
 + * - Digital mixers
 + *   - avaliable on:
 + *     - before stereo DAC - DAC_MXR_SRC
 + *     - I2S1 output - I2S1_MXR_SRC
 + *     - I2S2 output - I2S2_MXR_SRC
 + * - Analogue inputs
 + *   - LINEINL/R - 1 ch. mono
 + *     - can be mixed into ADC record mixer or DAC output mixer
 + *     - -9dB to 12dB in 1.5dB step by LINEIN_DIFF_PREG
 + *   - AXIL/R - 2 ch. stereo
 + *     - can be mixed into ADC record mixer or DAC output mixer
 + *     - programmable volume level adj. and mute
 + *       - -9dB to 12dB in 1.5dB steps by AXI_PREG
 + *   - MIC1P/N - has preamp
 + *   - MIC2P/N - has preamp
 + *   - MIC3P/N - has preamp muxed with MIC2 (sel by ADC_SRCBST_CTRL B7)
 + *     - can be mixed into ADC record mixer or DAC output mixer
 + *     - preamps enable at ADC_SRCBST_CTRL B15 and B11
 + *       - preamp gain at MIC1BOOST MIC2BOOST
 + * - Analogue outputs:
 + *   - HPOUTL/R, HPOUTFB - 2ch. headphones
 + *     - sources output mixer or directly from DAC
 + *       - sel HPOUT_CTRL B15 B14
 + *       - mute HPOUT_CTRL B13 B12
 + *     - power amp
 + *       - powerdown/up HPOUT_CTRL B11
 + *     - volume HP_VOL[5:0] - 64dB range in 1dB step from 0dB to -62dB
 + *       - mute by using 0 for HP_VOL[5:0]
 + *     - DC offset cancellation (POP noise) HP_DCRM_EN
 + *       - This bit must be set 0xf before headphone PA enabled, and this bit
 + *         must be set 0x0 before headphone PA disabled.
 + *     - zero cross to prevent noise/clicsk on volume change ZCROSS_EN
 + *   - SPOLP/N, SPORP/N 2 ch. speakers (mono/stereo)
 + *     - source for SPOLP
 + *       - left output mixer or (left+right) output mixer
 + *     - source for SPORP
 + *       - right output mixer or (left+right) output mixer
 + *     - volume 43.5dB rang in 1.5dB step from -43.5dB to 0dB
 + *     - amp enable SPKOUT_CTRL B11 B7
 + *   - EAROUTP/N - 1 ch earpeice
 + *     - source left DAC, right DAC, left output mixer or right output mixer
 + *     - volume ERPOUT_CTRL[4:0] 43.5dB range in 1.5dB step from -43.5dB to 0dB
 + *     - power amp enable ERPOUT_CTRL B5
 + *   - LINEOUTP/N - 1ch line out
 + *     - source MIC1 preamp, MIC2 preamp, left output mix or right output mix
 + *     - volume 10.5dB range in 1.5dB step from -4.5dB to 6dB
 + *     - out buffer power up/down LOUT_CTRL B4
 + *
 + * Jack insert detection:
 + * - HBIAS current detection
 + *   - 5bit ADC sample rate 16/32/64/128Hz
 + *   - HMIC_STATUS[12:8] - ADC value
 + *   - 2 thresholds TH1 for plug connection, TH2 for key press
 + *   - can periodically trigger interrupts during key press (HBIAS above TH2)
 + * 
 + * Interrupts:
 + * - FALLING_EDGE
 + * - for:
 + *   - KEYDOWN
 + *   - KEYUP
 + *   - PLUG_IN
 + *   - PLUG_OUT
 + *   - HMIC_DATA
 + *
 + * High Pass Filter:
 + * - remove DC offset, can be disabled
 + *
 + * AGC:
 + * - automatic gain control before ADC input channels
 + * - params:
 + *   - attack, decay time - 32/fs to 2^15*32/fs
 + *   - target gain - –1dB to –30dB relative to a full-scale signal
 + *   - noise threshold - –30dB to –90dB of full-scale (mute if input below this level)
 + *   - max gain 0dB to 40dB in steps of 0.5dB
 + *   - hysteresis - for noise detection in terms of signal level
 + *   - debounce time - hysteresis for noise det in terms of time
 + * - also provides some output flags:
 + *   - noise threshold reached
 + *   - current gain
 + *   - agc saturated (gain could get higher for the given input, but limited by
 + *		      params)
 + *   - adc saturated - clipping at ADC input stage
 + *
 + * DRC:
 + * - dynamic range control for digital playback path
 + *   - energy filter
 + *   - compressor
 + *   - smooth filter
 + * - can be disabled
 + */
 +
 +#define AC100_HMIC_DATA_MASK			GENMASK(12, 8)
 +#define AC100_HMIC_DATA_OFF			8
 +#define AC100_HMIC_PULLOUT_PENDING		BIT(4)
 +#define AC100_HMIC_PLUGIN_PENDING		BIT(3)
 +#define AC100_HMIC_KEYUP_PENDING		BIT(2)
 +#define AC100_HMIC_KEYDOWN_PENDING		BIT(1)
 +#define AC100_HMIC_DATA_PENDING			BIT(0)
 +
 +struct ac100_codec {
 +	struct device	*dev;
 +	struct regmap	*regmap;
 +	int 		irq;
 +};
 +
 +static irqreturn_t ac100_codec_irq(int irq, void *data)
 +{
 +	struct ac100_codec *codec = data;
 +	unsigned int val = 0;
 +	int ret;
 +
 +	/* read status */
 +	ret = regmap_read(codec->regmap, AC100_HMIC_STATUS, &val);
 +	if (ret)
 +		return IRQ_HANDLED;
 +
 +	if (val & AC100_HMIC_PULLOUT_PENDING) {
 +		dev_info(codec->dev, "IRQ: Pull out");
 +	}
 +
 +	if (val & AC100_HMIC_PLUGIN_PENDING) {
 +		dev_info(codec->dev, "IRQ: Plug in");
 +	}
 +
 +	if (val & AC100_HMIC_KEYUP_PENDING) {
 +		dev_info(codec->dev, "IRQ: Key up");
 +	}
 +
 +	if (val & AC100_HMIC_KEYDOWN_PENDING) {
 +		dev_info(codec->dev, "IRQ: Key down");
 +	}
 +
 +	if (val & AC100_HMIC_DATA_PENDING) {
 +		dev_info(codec->dev, "IRQ: Data");
 +	}
 +
 +	/* clear status */
 +	ret = regmap_write(codec->regmap, AC100_HMIC_STATUS, 0);
 +	if (ret)
 +		return IRQ_HANDLED;
 +
 +	return IRQ_HANDLED;
 +}
 +
 +static int ac100_codec_probe(struct platform_device *pdev)
 +{
 +	struct ac100_dev *ac100 = dev_get_drvdata(pdev->dev.parent);
 +	struct ac100_codec *codec;
 +	int ret;
 +
 +	codec = devm_kzalloc(&pdev->dev, sizeof(*codec), GFP_KERNEL);
 +	if (!codec)
 +		return -ENOMEM;
 +
 +	platform_set_drvdata(pdev, codec);
 +	codec->dev = &pdev->dev;
 +	codec->regmap = ac100->regmap;
 +
 +	codec->irq = platform_get_irq(pdev, 0);
 +	if (codec->irq < 0) {
 +		dev_err(&pdev->dev, "No IRQ resource\n");
 +		return codec->irq;
 +	}
 +
 +	ret = devm_request_threaded_irq(&pdev->dev, codec->irq, NULL,
 +					ac100_codec_irq,
 +					IRQF_SHARED | IRQF_ONESHOT,
 +					dev_name(&pdev->dev), codec);
 +	if (ret) {
 +		dev_err(&pdev->dev, "Could not request IRQ\n");
 +		return ret;
 +	}
 +
 +	return ret;
 +}
 +
 +static int ac100_codec_remove(struct platform_device *pdev)
 +{
 +	struct snd_soc_card *card = platform_get_drvdata(pdev);
 +	struct ac100_codec *codec = snd_soc_card_get_drvdata(card);
 +
 +	return 0;
 +}
 +
 +static const struct of_device_id ac100_codec_of_match[] = {
 +	{ .compatible = "x-powers,ac100-codec" },
 +	{}
 +};
 +MODULE_DEVICE_TABLE(of, ac100_codec_of_match);
 +
 +static struct platform_driver ac100_codec_driver = {
 +	.driver = {
 +		.name = "ac100-codec",
 +		.of_match_table = ac100_codec_of_match,
 +	},
 +	.probe = ac100_codec_probe,
 +	.remove = ac100_codec_remove,
 +};
 +module_platform_driver(ac100_codec_driver);
 +
 +MODULE_DESCRIPTION("X-Powers AC100 codec driver");
 +MODULE_AUTHOR("Ondrej Jirman <megous@megous.com>");
 +MODULE_LICENSE("GPL");
 +MODULE_ALIAS("platform:ac100-codec");
--- a/patch/kernel/sunxi-dev/0001-arm64-allwinner-a64-enable-Wi-Fi-for-Pine64.patch
+++ b/patch/kernel/sunxi-dev/0001-arm64-allwinner-a64-enable-Wi-Fi-for-Pine64.patch
@ -0,0 +1,52 @@
 From a5b709a81ad9a5e2e6e4be6a696711ad7f35ad57 Mon Sep 17 00:00:00 2001
 From: Icenowy Zheng <icenowy@aosc.io>
 Date: Thu, 9 Feb 2017 00:18:56 +0800
 Subject: [PATCH 001/146] arm64: allwinner: a64: enable Wi-Fi for Pine64
 The Wi-Fi modules of Pine64 is powered via DLDO4 and ELDO1 (the latter
 one provides I/O voltage).
 Add device node for it.
 Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
 ---
 .../boot/dts/allwinner/sun50i-a64-pine64.dts     | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
 index 1b9b92e541d2..d06b5b88f60e 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -62,6 +62,11 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 +
 +	wifi_pwrseq: wifi_pwrseq {
 +		compatible = "mmc-pwrseq-simple";
 +		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 +	};
 };
 &ehci0 {
@@ -109,6 +114,17 @@
 	status = "okay";
 };
 +&mmc1 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&mmc1_pins>;
 +	vmmc-supply = <&reg_dldo4>;
 +	vqmmc-supply = <&reg_eldo1>;
 +	mmc-pwrseq = <&wifi_pwrseq>;
 +	non-removable;
 +	bus-width = <4>;
 +	status = "okay";
 +};
 +
 &ohci0 {
 	status = "okay";
 };
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0001-arm64-pine64-plus-add-PHY-regulator-delay.patch
+++ b/patch/kernel/sunxi-dev/0001-arm64-pine64-plus-add-PHY-regulator-delay.patch
@ -0,0 +1,33 @@
 From bb0516f4d03ffe9bcc06f840e477ea665af94e9d Mon Sep 17 00:00:00 2001
 From: Jernej Skrabec <jernej.skrabec@siol.net>
 Date: Sun, 25 Aug 2019 14:40:10 +0200
 Subject: [PATCH] arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator
 delay
 Depending on kernel and bootloader configuration, it's possible that
 Realtek ethernet PHY isn't powered on properly. It needs some time
 before it can be used.
 Fix that by adding 100ms ramp delay to regulator responsible for
 powering PHY.
 Fixes: 94dcfdc77fc5 ("arm64: allwinner: pine64-plus: Enable dwmac-sun8i")
 Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
 ---
 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 4 ++++
 1 file changed, 4 insertions(+)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
 index 24f1aac366d6..9612a34c1762 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@@ -63,3 +63,7 @@
                reg = <1>;
        };
 };
 +
 +&reg_dc1sw {
 +       regulator-enable-ramp-delay = <100000>;
 +};
 --
 2.23.0
--- a/patch/kernel/sunxi-dev/0001-general-armbian-boot-logo.patch
+++ b/patch/kernel/sunxi-dev/0001-general-armbian-boot-logo.patch
--- a/patch/kernel/sunxi-dev/0001-pinctrl-sunxi-Disable-strict-mode-for-A64-pinctrl-dr.patch
+++ b/patch/kernel/sunxi-dev/0001-pinctrl-sunxi-Disable-strict-mode-for-A64-pinctrl-dr.patch
@ -0,0 +1,30 @@
 From 4aa7894de903660f5c8d5155f2590d00022ca95e Mon Sep 17 00:00:00 2001
 From: WaterByWind <WaterByWind@users.noreply.github.com>
 Date: Sun, 14 Apr 2019 16:16:09 -0400
 Subject: [PATCH] pinctrl: sunxi: Disable strict mode for A64 pinctrl driver
 With kernel 4.15.y (and later):
 *  Strict mode was enabled by default via commit 1396007286b1e2fd5dd10ae6a5ccaaaed51ab762 which can/will cause breakage with existing implementations.
 * The ability to configure strict mode was added via commit aae842a3ff3385f27f1df8a9ee1494a416ec032d to allow older drivers to maintain existing behavior and avoid breakage.
 * Commit cd70387f892205bcd7b8093b0837269b0739cbe0 had then explicitly disabled strict mode for most other existing SoCs but did not include A64.
 This change is to update the A64 pinctrl driver similar to the other pre-existing SoC pinctrl drivers.
 ---
 drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c | 1 +
 1 file changed, 1 insertion(+)
 diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c
 index 7b83d3755a0e..bea52c5a9afa 100644
 --- a/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c
 +++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c
@@ -578,6 +578,7 @@ static const struct sunxi_pinctrl_desc a64_pinctrl_data = {
 	.pins = a64_pins,
 	.npins = ARRAY_SIZE(a64_pins),
 	.irq_banks = 3,
 +	.disable_strict_mode = true,
 };
 static int a64_pinctrl_probe(struct platform_device *pdev)
 -- 
 2.20.1 (Apple Git-117)
--- a/patch/kernel/sunxi-dev/0002-arm64-allwinner-a64-add-Mali-device-node.patch-DISABLED
+++ b/patch/kernel/sunxi-dev/0002-arm64-allwinner-a64-add-Mali-device-node.patch-DISABLED
@ -0,0 +1,72 @@
 From fa666ec858630bad5d3bf2952c96460302065102 Mon Sep 17 00:00:00 2001
 From: Icenowy Zheng <icenowy@aosc.io>
 Date: Sat, 6 May 2017 19:29:44 +0800
 Subject: [PATCH 002/146] arm64: allwinner: a64: add Mali device node
 Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
 ---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 41 +++++++++++++++++++
 1 file changed, 41 insertions(+)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
 index d3daf90a8715..0f69f3593975 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -157,6 +157,20 @@
 		compatible = "linux,spdif-dit";
 	};
 +	reserved-memory {
 +		#address-cells = <1>;
 +		#size-cells = <1>;
 +		ranges;
 +
 +		cma: linux,cma {
 +			compatible = "shared-dma-pool";
 +			reusable;
 +			size = <0x4000000>;
 +			alignment = <0x2000>;
 +			linux,cma-default;
 +		};
 +	};
 +
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
@@ -664,6 +678,33 @@
 			};
 		};
 +		mali: gpu@1c40000 {
 +			compatible = "allwinner,sun50i-a64-mali",
 +				     "allwinner,sun7i-a20-mali", "arm,mali-400";
 +			reg = <0x01c40000 0x10000>;
 +			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
 +				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
 +				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
 +				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
 +				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
 +				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
 +				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 +			interrupt-names = "gp",
 +					  "gpmmu",
 +					  "pp0",
 +					  "ppmmu0",
 +					  "pp1",
 +					  "ppmmu1",
 +					  "pmu";
 +			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
 +			clock-names = "bus", "core";
 +			resets = <&ccu RST_BUS_GPU>;
 +			memory-region = <&cma>;
 +
 +			assigned-clocks = <&ccu CLK_GPU>;
 +			assigned-clock-rates = <384000000>;
 +		};
 +
 		gic: interrupt-controller@1c81000 {
 			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0003-net-stmmac-dwmac-sun8i-support-RGMII-modes-with-PHY-.patch
+++ b/patch/kernel/sunxi-dev/0003-net-stmmac-dwmac-sun8i-support-RGMII-modes-with-PHY-.patch
@ -0,0 +1,35 @@
 From 98800eeb2244387e821f4af8d21ccf2deaf18da0 Mon Sep 17 00:00:00 2001
 From: Icenowy Zheng <icenowy@aosc.io>
 Date: Mon, 21 Aug 2017 23:02:32 +0800
 Subject: [PATCH 003/146] net: stmmac: dwmac-sun8i: support RGMII modes with
 PHY internal delay
 Some boards uses a PHY with internal delay with an Allwinner SoC.
 Support these PHY modes in the driver.
 As the driver has no configuration registers for these modes, just treat
 them as ordinary RGMII.
 Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
 ---
 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 3 +++
 1 file changed, 3 insertions(+)
 diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
 index f9a61f90cfbc..3c18f4a9dd6c 100644
 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
 +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -933,6 +933,9 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
 		/* default */
 		break;
 	case PHY_INTERFACE_MODE_RGMII:
 +	case PHY_INTERFACE_MODE_RGMII_ID:
 +	case PHY_INTERFACE_MODE_RGMII_RXID:
 +	case PHY_INTERFACE_MODE_RGMII_TXID:
 		reg |= SYSCON_EPIT | SYSCON_ETCS_INT_GMII;
 		break;
 	case PHY_INTERFACE_MODE_RMII:
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0004-arm64-allwinner-a64-disable-the-RTL8211E-internal-RX.patch
+++ b/patch/kernel/sunxi-dev/0004-arm64-allwinner-a64-disable-the-RTL8211E-internal-RX.patch
@ -0,0 +1,35 @@
 From e89cb84d23d2537cd1b256afdd0fe880648ee1a9 Mon Sep 17 00:00:00 2001
 From: Icenowy Zheng <icenowy@aosc.io>
 Date: Mon, 21 Aug 2017 23:08:08 +0800
 Subject: [PATCH 004/146] arm64: allwinner: a64: disable the RTL8211E internal
 RX delay on Pine64+
 Some Pine64+ boards have a broken RTL8211E PHY, which cannot work
 reliably in 1000Base-T mode with default configuration.
 A solution is passed to Pine64, which is said to be disabling the
 internal RX delay of the PHY.
 Enable the hack by set the PHY mode to RGMII-TXID.
 Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
 ---
 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
 index 24f1aac366d6..ed715426fffc 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@@ -52,7 +52,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
 -	phy-mode = "rgmii";
 +	phy-mode = "rgmii-txid";
 	phy-handle = <&ext_rgmii_phy>;
 	status = "okay";
 };
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0005-drm-gem-cma-Export-with-handle-allocator.patch
+++ b/patch/kernel/sunxi-dev/0005-drm-gem-cma-Export-with-handle-allocator.patch
@ -0,0 +1,50 @@
 From ea69ff188dd5d9ac7162f05a22bf299b83a7536e Mon Sep 17 00:00:00 2001
 From: Maxime Ripard <maxime.ripard@free-electrons.com>
 Date: Mon, 7 Dec 2015 09:33:28 +0100
 Subject: [PATCH 005/146] drm: gem: cma: Export with handle allocator
 Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
 ---
 drivers/gpu/drm/drm_gem_cma_helper.c | 3 ++-
 include/drm/drm_gem_cma_helper.h     | 4 ++++
 2 files changed, 6 insertions(+), 1 deletion(-)
 diff --git a/drivers/gpu/drm/drm_gem_cma_helper.c b/drivers/gpu/drm/drm_gem_cma_helper.c
 index 80a5115c3846..077c61f065d9 100644
 --- a/drivers/gpu/drm/drm_gem_cma_helper.c
 +++ b/drivers/gpu/drm/drm_gem_cma_helper.c
@@ -142,7 +142,7 @@ EXPORT_SYMBOL_GPL(drm_gem_cma_create);
  * A struct drm_gem_cma_object * on success or an ERR_PTR()-encoded negative
  * error code on failure.
  */
 -static struct drm_gem_cma_object *
 +struct drm_gem_cma_object *
 drm_gem_cma_create_with_handle(struct drm_file *file_priv,
 			       struct drm_device *drm, size_t size,
 			       uint32_t *handle)
@@ -169,6 +169,7 @@ drm_gem_cma_create_with_handle(struct drm_file *file_priv,
 	return cma_obj;
 }
 +EXPORT_SYMBOL_GPL(drm_gem_cma_create_with_handle);
 /**
  * drm_gem_cma_free_object - free resources associated with a CMA GEM object
 diff --git a/include/drm/drm_gem_cma_helper.h b/include/drm/drm_gem_cma_helper.h
 index 19777145cf8e..79f397c91517 100644
 --- a/include/drm/drm_gem_cma_helper.h
 +++ b/include/drm/drm_gem_cma_helper.h
@@ -79,6 +79,10 @@ int drm_gem_cma_mmap(struct file *filp, struct vm_area_struct *vma);
 /* allocate physical memory */
 struct drm_gem_cma_object *drm_gem_cma_create(struct drm_device *drm,
 					      size_t size);
 +struct drm_gem_cma_object *
 +drm_gem_cma_create_with_handle(struct drm_file *file_priv,
 +			       struct drm_device *drm, size_t size,
 +			       uint32_t *handle);
 extern const struct vm_operations_struct drm_gem_cma_vm_ops;
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0006-drm-sun4i-Add-GEM-allocator.patch
+++ b/patch/kernel/sunxi-dev/0006-drm-sun4i-Add-GEM-allocator.patch
@ -0,0 +1,102 @@
 From b143de6aef8be007256082e0f89606b7f5e3c757 Mon Sep 17 00:00:00 2001
 From: Maxime Ripard <maxime.ripard@free-electrons.com>
 Date: Mon, 7 Dec 2015 09:47:34 +0100
 Subject: [PATCH 006/146] drm/sun4i: Add GEM allocator
 Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
 ---
 drivers/gpu/drm/sun4i/sun4i_drv.c | 27 +++++++++++++++++++++++++++
 include/uapi/drm/sun4i_drm.h      | 29 +++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+)
 create mode 100644 include/uapi/drm/sun4i_drm.h
 diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c
 index 8b0cd08034e0..9f5de14fb2fe 100644
 --- a/drivers/gpu/drm/sun4i/sun4i_drv.c
 +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c
@@ -22,6 +22,8 @@
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_of.h>
 +#include <uapi/drm/sun4i_drm.h>
 +
 #include "sun4i_drv.h"
 #include "sun4i_frontend.h"
 #include "sun4i_framebuffer.h"
@@ -30,6 +32,27 @@
 DEFINE_DRM_GEM_CMA_FOPS(sun4i_drv_fops);
 +static int sun4i_gem_create_ioctl(struct drm_device *drm, void *data,
 +				  struct drm_file *file_priv)
 +{
 +	struct drm_sun4i_gem_create *args = data;
 +	struct drm_gem_cma_object *cma_obj;
 +	size_t size;
 +
 +	/* The Mali requires a 64 bytes alignment */
 +	size = ALIGN(args->size, 64);
 +
 +	cma_obj = drm_gem_cma_create_with_handle(file_priv, drm, size,
 +						 &args->handle);
 +
 +	return PTR_ERR_OR_ZERO(cma_obj);
 +}
 +
 +static const struct drm_ioctl_desc sun4i_drv_ioctls[] = {
 +	DRM_IOCTL_DEF_DRV(SUN4I_GEM_CREATE, sun4i_gem_create_ioctl,
 +			  DRM_UNLOCKED | DRM_AUTH),
 +};
 +
 static struct drm_driver sun4i_drv_driver = {
 	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME | DRIVER_ATOMIC,
@@ -42,6 +65,10 @@ static struct drm_driver sun4i_drv_driver = {
 	.major			= 1,
 	.minor			= 0,
 +	/* Custom ioctls */
 +	.ioctls			= sun4i_drv_ioctls,
 +	.num_ioctls		= ARRAY_SIZE(sun4i_drv_ioctls),
 +
 	/* GEM Operations */
 	.dumb_create		= drm_gem_cma_dumb_create,
 	.gem_free_object_unlocked = drm_gem_cma_free_object,
 diff --git a/include/uapi/drm/sun4i_drm.h b/include/uapi/drm/sun4i_drm.h
 new file mode 100644
 index 000000000000..67b9dd4ee594
 --- /dev/null
 +++ b/include/uapi/drm/sun4i_drm.h
@@ -0,0 +1,29 @@
 +/*
 + * Copyright (C) 2015 Free Electrons
 + * Copyright (C) 2015 NextThing Co
 + *
 + * Maxime Ripard <maxime.ripard@free-electrons.com>
 + *
 + * This program is free software; you can redistribute it and/or
 + * modify it under the terms of the GNU General Public License as
 + * published by the Free Software Foundation; either version 2 of
 + * the License, or (at your option) any later version.
 + */
 +
 +#ifndef _UAPI_SUN4I_DRM_H_
 +#define _UAPI_SUN4I_DRM_H_
 +
 +#include <drm/drm.h>
 +
 +struct drm_sun4i_gem_create {
 +	__u64 size;
 +	__u32 flags;
 +	__u32 handle;
 +};
 +
 +#define DRM_SUN4I_GEM_CREATE		0x00
 +
 +#define DRM_IOCTL_SUN4I_GEM_CREATE	DRM_IOWR(DRM_COMMAND_BASE + DRM_SUN4I_GEM_CREATE, \
 +						 struct drm_sun4i_gem_create)
 +
 +#endif
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0007-Add-sopine-HDMI-sound-and-WiFi-support.patch
+++ b/patch/kernel/sunxi-dev/0007-Add-sopine-HDMI-sound-and-WiFi-support.patch
@ -0,0 +1,96 @@
 From 87020e638ad511e0ebe9c72208d2f0192c905812 Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Sun, 3 Dec 2017 11:43:08 -0800
 Subject: [PATCH 007/146] Add sopine HDMI sound and WiFi support
 ---
 .../allwinner/sun50i-a64-sopine-baseboard.dts | 18 ++++++++++++
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 29 +++++++++++++++++++
 2 files changed, 47 insertions(+)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
 index c21f2331add6..8161895dde52 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -86,6 +86,10 @@
 	status = "okay";
 };
 +&i2s2 {
 +	status = "okay";
 +};
 +
 &mdio {
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
@@ -93,6 +97,16 @@
 	};
 };
 +&mmc1 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&mmc1_pins>;
 +	vmmc-supply = <&reg_dldo4>;
 +	vqmmc-supply = <&reg_eldo1>;
 +	non-removable;
 +	bus-width = <4>;
 +	status = "okay";
 +};
 +
 &mmc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
@@ -138,6 +152,10 @@
 	vcc-hdmi-supply = <&reg_dldo1>;
 };
 +&sound_hdmi {
 +	status = "okay";
 +};
 +
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
 index 0f69f3593975..0b44018361cb 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -727,6 +727,35 @@
 			status = "disabled";
 		};
 +		i2s2: i2s@1c22800 {
 +			#sound-dai-cells = <0>;
 +			compatible = "allwinner,sun8i-h3-i2s";
 +			reg = <0x01c22800 0x400>;
 +			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 +			clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
 +			clock-names = "apb", "mod";
 +			dmas = <&dma 27>;
 +			resets = <&ccu RST_BUS_I2S2>;
 +			dma-names = "tx";
 +			status = "disabled";
 +		};
 +
 +		sound_hdmi: sound_hdmi {
 +			compatible = "simple-audio-card";
 +			simple-audio-card,format = "i2s";
 +			simple-audio-card,name = "allwinner,hdmi";
 +			simple-audio-card,mclk-fs = <256>;
 +			status = "disabled";
 +
 +			simple-audio-card,codec {
 +				sound-dai = <&hdmi>;
 +			};
 +
 +			simple-audio-card,cpu {
 +				sound-dai = <&i2s2>;
 +			};
 +		};
 +
 		rtc: rtc@1f00000 {
 			compatible = "allwinner,sun6i-a31-rtc";
 			reg = <0x01f00000 0x54>;
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0008-arm64-dts-sun50i-a64-pine64-add-HDMI-audio-nodes.patch
+++ b/patch/kernel/sunxi-dev/0008-arm64-dts-sun50i-a64-pine64-add-HDMI-audio-nodes.patch
@ -0,0 +1,39 @@
 From 887b96d878bb0e261bc19062dc73d193c75bc56a Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Tue, 26 Dec 2017 15:53:53 -0800
 Subject: [PATCH 008/146] arm64: dts: sun50i-a64-pine64: add HDMI audio nodes
 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
 ---
 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 8 ++++++++
 1 file changed, 8 insertions(+)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
 index d06b5b88f60e..8c5dd99cc9ac 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -97,6 +97,10 @@
 	bias-pull-up;
 };
 +&i2s2 {
 +	status = "okay";
 +};
 +
 &mdio {
 	ext_rmii_phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
@@ -254,6 +258,10 @@
 	status = "disabled";
 };
 +&sound_hdmi {
 +	status = "okay";
 +};
 +
 /* On Exp and Euler connectors */
 &uart0 {
 	pinctrl-names = "default";
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0009-dt-bindings-update-the-Allwinner-GPADC-device-tree-b.patch
+++ b/patch/kernel/sunxi-dev/0009-dt-bindings-update-the-Allwinner-GPADC-device-tree-b.patch
@ -0,0 +1,95 @@
 From 92e5c7876cef2b53ed3d1701169fcd93b73e0e33 Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Sat, 20 Jan 2018 13:25:21 +0100
 Subject: [PATCH 009/146] dt-bindings: update the Allwinner GPADC device tree
 binding for H3 & A83T
 Allwinner H3 features a thermal sensor like the one in A33, but has its
 register re-arranged, the clock divider moved to CCU (originally the
 clock divider is in ADC) and added a pair of bus clock and reset.
 Allwinner A83T features a thermal sensor similar to the H3, the ths clock,
 the bus clock and the reset was removed from the CCU. The THS in A83T
 has a clock that is directly connected and runs with 24 MHz.
 Update the binding document to cover H3 and A83T.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 .../devicetree/bindings/mfd/sun4i-gpadc.txt   | 50 +++++++++++++++++--
 1 file changed, 47 insertions(+), 3 deletions(-)
 diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
 index 86dd8191b04c..f6b939617a6d 100644
 --- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
 +++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
@@ -4,12 +4,35 @@ The Allwinner SoCs all have an ADC that can also act as a thermal sensor
 and sometimes as a touchscreen controller.
 Required properties:
 -  - compatible: "allwinner,sun8i-a33-ths",
 +  - compatible: must contain one of the following compatibles:
 +		- "allwinner,sun8i-a33-ths"
 +		- "allwinner,sun8i-h3-ths"
 +		- "allwinner,sun8i-a83t-ths"
   - reg: mmio address range of the chip,
 -  - #thermal-sensor-cells: shall be 0,
 +  - #thermal-sensor-cells: shall be 0 or 1,
   - #io-channel-cells: shall be 0,
 -Example:
 +Required properties for the following compatibles:
 +		- "allwinner,sun8i-h3-ths"
 +		- "allwinner,sun8i-a83t-ths"
 +  - interrupts: the sampling interrupt of the ADC,
 +
 +Required properties for the following compatibles:
 +		- "allwinner,sun8i-h3-ths"
 +  - clocks: the bus clock and the input clock of the ADC,
 +  - clock-names: should be "bus" and "mod",
 +  - resets: the bus reset of the ADC,
 +
 +Optional properties for the following compatibles:
 +		- "allwinner,sun8i-h3-ths"
 +  - nvmem-cells: A phandle to the calibration data provided by a nvmem device.
 +		If unspecified default values shall be used. The size should
 +		be 0x4 or 0x8, depending on the amount of CDATA registers.
 +  - nvmem-cell-names: Should be "calibration".
 +
 +Details see: bindings/nvmem/nvmem.txt
 +
 +Example for A33:
 	ths: ths@1c25000 {
 		compatible = "allwinner,sun8i-a33-ths";
 		reg = <0x01c25000 0x100>;
@@ -17,6 +40,27 @@ Example:
 		#io-channel-cells = <0>;
 	};
 +Example for H3:
 +	ths: thermal-sensor@1c25000 {
 +		compatible = "allwinner,sun8i-h3-ths";
 +		reg = <0x01c25000 0x400>;
 +		clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
 +		clock-names = "bus", "mod";
 +		resets = <&ccu RST_BUS_THS>;
 +		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 +		#thermal-sensor-cells = <0>;
 +		#io-channel-cells = <0>;
 +	};
 +
 +Example for A83T:
 +	ths: thermal-sensor@1f04000 {
 +		compatible = "allwinner,sun8i-a83t-ths";
 +		reg = <0x01f04000 0x100>;
 +		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 +		#thermal-sensor-cells = <1>;
 +		#io-channel-cells = <0>;
 +	};
 +
 sun4i, sun5i and sun6i SoCs are also supported via the older binding:
 sun4i resistive touchscreen controller
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0010-general-h6-add-dma-i2c-ir-spi-uart.patch
+++ b/patch/kernel/sunxi-dev/0010-general-h6-add-dma-i2c-ir-spi-uart.patch
@ -0,0 +1,174 @@
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
 index dc785da9c..141fd186b 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -113,6 +113,12 @@
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 +		opp@1640000000 {
 +			opp-hz = /bits/ 64 <1640000000>;
 +			opp-microvolt = <1160000 1160000 1160000>;
 +			clock-latency-ns = <244144>; /* 8 32k periods */
 +		};
 +
 		opp@1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
 			opp-microvolt = <1160000 1160000 1160000>;
@@ -374,6 +381,17 @@
 			#dma-cells = <1>;
 		};
 +		gic: interrupt-controller@3021000 {
 +			compatible = "arm,gic-400";
 +			reg = <0x03021000 0x1000>,
 +			      <0x03022000 0x2000>,
 +			      <0x03024000 0x2000>,
 +			      <0x03026000 0x2000>;
 +			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 +			interrupt-controller;
 +			#interrupt-cells = <3>;
 +		};
 +
 		sid: efuse@3006000 {
 			compatible = "allwinner,sun50i-h6-sid";
 			reg = <0x03006000 0x400>;
@@ -279,6 +305,7 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 +			/omit-if-no-ref/
 			ext_rgmii_pins: rgmii-pins {
 				pins = "PD0", "PD1", "PD2", "PD3", "PD4",
 				       "PD5", "PD7", "PD8", "PD9", "PD10",
@@ -309,6 +354,7 @@
 				bias-pull-up;
 			};
 +			/omit-if-no-ref/
 			mmc2_pins: mmc2-pins {
 				pins = "PC1", "PC4", "PC5", "PC6",
 				       "PC7", "PC8", "PC9", "PC10",
@@ -318,6 +364,16 @@
 				bias-pull-up;
 			};
 +			spi0_pins: spi0-pins {
 +				pins = "PC2", "PC3", "PC0", "PC5";
 +				function = "spi0";
 +			};
 +
 +			spi1_pins: spi1-pins {
 +				pins = "PH5", "PH6", "PH4", "PH3";
 +				function = "spi1";
 +			};
 +
 			uart0_ph_pins: uart0-ph-pins {
 				pins = "PH0", "PH1";
 				function = "uart0";
@@ -511,17 +540,26 @@
 				pins = "PG8", "PG9";
 				function = "uart1";
 			};
 -		};
 -		gic: interrupt-controller@3021000 {
 -			compatible = "arm,gic-400";
 -			reg = <0x03021000 0x1000>,
 -			      <0x03022000 0x2000>,
 -			      <0x03024000 0x2000>,
 -			      <0x03026000 0x2000>;
 -			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 -			interrupt-controller;
 -			#interrupt-cells = <3>;
 +			uart2_pins: uart2-pins {
 +				pins = "PD19", "PD20";
 +				function = "uart2";
 +			};
 +
 +			uart2_rts_cts_pins: uart2-rts-cts-pins {
 +				pins = "PD21", "PD22";
 +				function = "uart2";
 +			};
 +
 +			uart3_pins: uart3-pins {
 +				pins = "PD23", "PD24";
 +				function = "uart3";
 +			};
 +
 +			uart3_rts_cts_pins: uart3-rts-cts-pins {
 +				pins = "PD25", "PD26";
 +				function = "uart3";
 +			};
 		};
 		mmc0: mmc@4020000 {
@@ -391,6 +495,38 @@
 			#size-cells = <0>;
 		};
 +		spi0: spi@5010000 {
 +			compatible = "allwinner,sun8i-h3-spi";
 +			reg = <0x05010000 0x1000>;
 +			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 +			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
 +			clock-names = "ahb", "mod";
 +			dmas = <&dma 22>, <&dma 22>;
 +			dma-names = "rx", "tx";
 +			pinctrl-names = "default";
 +			pinctrl-0 = <&spi0_pins>;
 +			resets = <&ccu RST_BUS_SPI0>;
 +			status = "disabled";
 +			#address-cells = <1>;
 +			#size-cells = <0>;
 +		};
 +
 +		spi1: spi@5011000 {
 +			compatible = "allwinner,sun8i-h3-spi";
 +			reg = <0x05011000 0x1000>;
 +			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 +			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
 +			clock-names = "ahb", "mod";
 +			dmas = <&dma 23>, <&dma 23>;
 +			dma-names = "rx", "tx";
 +			pinctrl-names = "default";
 +			pinctrl-0 = <&spi1_pins>;
 +			resets = <&ccu RST_BUS_SPI1>;
 +			status = "disabled";
 +			#address-cells = <1>;
 +			#size-cells = <0>;
 +		};
 +
 		uart0: serial@5000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x05000000 0x400>;
@@ -768,6 +904,29 @@
 				pins = "PL0", "PL1";
 				function = "s_i2c";
 			};
 +
 +			r_ir_rx_pins: r-ir-rx-pins {
 +				pins = "PL9";
 +				function = "s_cir_rx";
 +			};
 +
 +			r_uart_pins: r-uart-pins {
 +				pins = "PL2", "PL3";
 +				function = "s_uart";
 +			};
 +		};
 +
 +		r_uart: serial@7080000 {
 +			compatible = "snps,dw-apb-uart";
 +			reg = <0x07080000 0x400>;
 +			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 +			reg-shift = <2>;
 +			reg-io-width = <4>;
 +			clocks = <&r_ccu CLK_R_APB2_UART>;
 +			resets = <&r_ccu RST_R_APB2_UART>;
 +			pinctrl-names = "default";
 +			pinctrl-0 = <&r_uart_pins>;
 +			status = "disabled";
 		};
 		r_i2c: i2c@7081400 {
--- a/patch/kernel/sunxi-dev/0011-iio-adc-sun4i-gpadc-iio-rename-A33-specified-registe.patch
+++ b/patch/kernel/sunxi-dev/0011-iio-adc-sun4i-gpadc-iio-rename-A33-specified-registe.patch
@ -0,0 +1,56 @@
 From ef6a8862ab9440c5d6a73da32be83edc46e2fe94 Mon Sep 17 00:00:00 2001
 From: Icenowy Zheng <icenowy@aosc.io>
 Date: Thu, 14 Sep 2017 22:52:47 +0800
 Subject: [PATCH 011/146] iio: adc: sun4i-gpadc-iio: rename A33-specified
 registers to contain A33
 As the H3 SoC, which is also in sun8i line, has totally different
 register map for the thermal sensor (a cut down version of GPADC), we
 should rename A23/A33-specified registers to contain A33, in order to
 prevent obfuscation with H3 registers. Currently these registers are
 only prefixed "SUN8I", not "SUN8I_A33".
 Add "_A33" after "SUN8I" on the register names.
 Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
 Reviewed-by: Chen-Yu Tsai <wens@csie.org>
 Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
 Acked-by: Lee Jones <lee.jones@linaro.org>
 ---
 drivers/iio/adc/sun4i-gpadc-iio.c | 2 +-
 include/linux/mfd/sun4i-gpadc.h   | 6 +++---
 2 files changed, 4 insertions(+), 4 deletions(-)
 diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
 index 04d7147e0110..03804ff9c006 100644
 --- a/drivers/iio/adc/sun4i-gpadc-iio.c
 +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -88,7 +88,7 @@ static const struct gpadc_data sun6i_gpadc_data = {
 static const struct gpadc_data sun8i_a33_gpadc_data = {
 	.temp_offset = -1662,
 	.temp_scale = 162,
 -	.tp_mode_en = SUN8I_GPADC_CTRL1_CHOP_TEMP_EN,
 +	.tp_mode_en = SUN8I_A33_GPADC_CTRL1_CHOP_TEMP_EN,
 };
 struct sun4i_gpadc_iio {
 diff --git a/include/linux/mfd/sun4i-gpadc.h b/include/linux/mfd/sun4i-gpadc.h
 index 139872c2e0fe..78d31984a222 100644
 --- a/include/linux/mfd/sun4i-gpadc.h
 +++ b/include/linux/mfd/sun4i-gpadc.h
@@ -38,9 +38,9 @@
 #define SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(x)		(GENMASK(3, 0) & BIT(x))
 #define SUN6I_GPADC_CTRL1_ADC_CHAN_MASK			GENMASK(3, 0)
 -/* TP_CTRL1 bits for sun8i SoCs */
 -#define SUN8I_GPADC_CTRL1_CHOP_TEMP_EN			BIT(8)
 -#define SUN8I_GPADC_CTRL1_GPADC_CALI_EN			BIT(7)
 +/* TP_CTRL1 bits for A33 */
 +#define SUN8I_A33_GPADC_CTRL1_CHOP_TEMP_EN		BIT(8)
 +#define SUN8I_A33_GPADC_CTRL1_GPADC_CALI_EN		BIT(7)
 #define SUN4I_GPADC_CTRL2				0x08
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0012-general-h6-new-opp-table.patch
+++ b/patch/kernel/sunxi-dev/0012-general-h6-new-opp-table.patch
@ -0,0 +1,72 @@
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
 index 141fd186b..4d4dcf8eb 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -67,61 +67,62 @@
 		};
 	};
 +	/* axp80,DCDC-A: 0.6~1.1V, 10mV/Step, 51 steps; 1.12~1.52V, 20mV/Step, 21 Steps */
 	cpu_opp_table: opp_table {
 		compatible = "operating-points-v2";
 		opp-shared;
 		opp@480000000 {
 			opp-hz = /bits/ 64 <480000000>;
 			opp-microvolt = <880000 880000 880000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 		opp@720000000 {
 			opp-hz = /bits/ 64 <720000000>;
 			opp-microvolt = <880000 880000 880000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 		opp@816000000 {
 			opp-hz = /bits/ 64 <816000000>;
 			opp-microvolt = <880000 880000 880000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 		opp@888000000 {
 			opp-hz = /bits/ 64 <888000000>;
 			opp-microvolt = <880000 880000 880000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 		opp@1080000000 {
 			opp-hz = /bits/ 64 <1080000000>;
 -			opp-microvolt = <940000 940000 940000>;
 +			opp-microvolt = <880000 880000 940000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 		opp@1320000000 {
 			opp-hz = /bits/ 64 <1320000000>;
 -			opp-microvolt = <1000000 1000000 1000000>;
 +			opp-microvolt = <880000 880000 1000000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 		opp@1488000000 {
 			opp-hz = /bits/ 64 <1488000000>;
 -			opp-microvolt = <1060000 1060000 1060000>;
 +			opp-microvolt = <940000 940000 1060000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 		opp@1640000000 {
 			opp-hz = /bits/ 64 <1640000000>;
 -			opp-microvolt = <1160000 1160000 1160000>;
 +			opp-microvolt = <990000 990000 1160000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 		opp@1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
 -			opp-microvolt = <1160000 1160000 1160000>;
 +			opp-microvolt = <1050000 1050000 1160000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 	};
--- a/patch/kernel/sunxi-dev/0012-iio-adc-sun4i-gpadc-iio-rework-sampling-start-end-co.patch
+++ b/patch/kernel/sunxi-dev/0012-iio-adc-sun4i-gpadc-iio-rework-sampling-start-end-co.patch
@ -0,0 +1,237 @@
 From 3de3b1512ed5905e9522a4966d238f571825ee70 Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Sat, 20 Jan 2018 14:03:10 +0100
 Subject: [PATCH 012/146] iio: adc: sun4i-gpadc-iio: rework: sampling start/end
 code readout reg
 For adding newer sensor some basic rework of the code is necessary.
 This commit reworks the code and allows the sampling start/end code and
 the position of value readout register to be altered. Later the start/end
 functions will be used to configure the ths and start/stop the
 sampling.
 Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 drivers/iio/adc/sun4i-gpadc-iio.c | 87 ++++++++++++++++++++++++++++---
 include/linux/mfd/sun4i-gpadc.h   | 19 +++++--
 2 files changed, 94 insertions(+), 12 deletions(-)
 diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
 index 03804ff9c006..363936b37c5a 100644
 --- a/drivers/iio/adc/sun4i-gpadc-iio.c
 +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -49,6 +49,18 @@ static unsigned int sun6i_gpadc_chan_select(unsigned int chan)
 	return SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(chan);
 }
 +struct sun4i_gpadc_iio;
 +
 +/*
 + * Prototypes for these functions, which enable these functions to be
 + * referenced in gpadc_data structures.
 + */
 +static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info);
 +static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info);
 +
 +static int sunxi_ths_sample_start(struct sun4i_gpadc_iio *info);
 +static int sunxi_ths_sample_end(struct sun4i_gpadc_iio *info);
 +
 struct gpadc_data {
 	int		temp_offset;
 	int		temp_scale;
@@ -56,6 +68,13 @@ struct gpadc_data {
 	unsigned int	tp_adc_select;
 	unsigned int	(*adc_chan_select)(unsigned int chan);
 	unsigned int	adc_chan_mask;
 +	unsigned int	temp_data;
 +	int		(*sample_start)(struct sun4i_gpadc_iio *info);
 +	int		(*sample_end)(struct sun4i_gpadc_iio *info);
 +	u32		ctrl0_map;
 +	u32		ctrl2_map;
 +	u32		sensor_en_map;
 +	u32		filter_map;
 };
 static const struct gpadc_data sun4i_gpadc_data = {
@@ -65,6 +84,9 @@ static const struct gpadc_data sun4i_gpadc_data = {
 	.tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
 	.adc_chan_select = &sun4i_gpadc_chan_select,
 	.adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
 +	.temp_data = SUN4I_GPADC_TEMP_DATA,
 +	.sample_start = sun4i_gpadc_sample_start,
 +	.sample_end = sun4i_gpadc_sample_end,
 };
 static const struct gpadc_data sun5i_gpadc_data = {
@@ -74,6 +96,9 @@ static const struct gpadc_data sun5i_gpadc_data = {
 	.tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
 	.adc_chan_select = &sun4i_gpadc_chan_select,
 	.adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
 +	.temp_data = SUN4I_GPADC_TEMP_DATA,
 +	.sample_start = sun4i_gpadc_sample_start,
 +	.sample_end = sun4i_gpadc_sample_end,
 };
 static const struct gpadc_data sun6i_gpadc_data = {
@@ -83,12 +108,18 @@ static const struct gpadc_data sun6i_gpadc_data = {
 	.tp_adc_select = SUN6I_GPADC_CTRL1_TP_ADC_SELECT,
 	.adc_chan_select = &sun6i_gpadc_chan_select,
 	.adc_chan_mask = SUN6I_GPADC_CTRL1_ADC_CHAN_MASK,
 +	.temp_data = SUN4I_GPADC_TEMP_DATA,
 +	.sample_start = sun4i_gpadc_sample_start,
 +	.sample_end = sun4i_gpadc_sample_end,
 };
 static const struct gpadc_data sun8i_a33_gpadc_data = {
 	.temp_offset = -1662,
 	.temp_scale = 162,
 	.tp_mode_en = SUN8I_A33_GPADC_CTRL1_CHOP_TEMP_EN,
 +	.temp_data = SUN4I_GPADC_TEMP_DATA,
 +	.sample_start = sun4i_gpadc_sample_start,
 +	.sample_end = sun4i_gpadc_sample_end,
 };
 struct sun4i_gpadc_iio {
@@ -277,7 +308,7 @@ static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val)
 	if (info->no_irq) {
 		pm_runtime_get_sync(indio_dev->dev.parent);
 -		regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, val);
 +		regmap_read(info->regmap, info->data->temp_data, val);
 		pm_runtime_mark_last_busy(indio_dev->dev.parent);
 		pm_runtime_put_autosuspend(indio_dev->dev.parent);
@@ -382,10 +413,8 @@ static irqreturn_t sun4i_gpadc_fifo_data_irq_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 -static int sun4i_gpadc_runtime_suspend(struct device *dev)
 +static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info)
 {
 -	struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
 -
 	/* Disable the ADC on IP */
 	regmap_write(info->regmap, SUN4I_GPADC_CTRL1, 0);
 	/* Disable temperature sensor on IP */
@@ -394,19 +423,32 @@ static int sun4i_gpadc_runtime_suspend(struct device *dev)
 	return 0;
 }
 -static int sun4i_gpadc_runtime_resume(struct device *dev)
 +static int sunxi_ths_sample_end(struct sun4i_gpadc_iio *info)
 +{
 +	/* Disable temperature sensor */
 +	regmap_write(info->regmap, SUNXI_THS_CTRL2, 0x0);
 +
 +	return 0;
 +}
 +
 +static int sun4i_gpadc_runtime_suspend(struct device *dev)
 {
 	struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
 +	return info->data->sample_end(info);
 +}
 +
 +static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info)
 +{
 	/* clkin = 6MHz */
 	regmap_write(info->regmap, SUN4I_GPADC_CTRL0,
 		     SUN4I_GPADC_CTRL0_ADC_CLK_DIVIDER(2) |
 		     SUN4I_GPADC_CTRL0_FS_DIV(7) |
 -		     SUN4I_GPADC_CTRL0_T_ACQ(63));
 +		     SUNXI_THS_ACQ0(63));
 	regmap_write(info->regmap, SUN4I_GPADC_CTRL1, info->data->tp_mode_en);
 	regmap_write(info->regmap, SUN4I_GPADC_CTRL3,
 -		     SUN4I_GPADC_CTRL3_FILTER_EN |
 -		     SUN4I_GPADC_CTRL3_FILTER_TYPE(1));
 +		     SUNXI_THS_FILTER_EN |
 +		     SUNXI_THS_FILTER_TYPE(1));
 	/* period = SUN4I_GPADC_TPR_TEMP_PERIOD * 256 * 16 / clkin; ~0.6s */
 	regmap_write(info->regmap, SUN4I_GPADC_TPR,
 		     SUN4I_GPADC_TPR_TEMP_ENABLE |
@@ -415,6 +457,35 @@ static int sun4i_gpadc_runtime_resume(struct device *dev)
 	return 0;
 }
 +static int sunxi_ths_sample_start(struct sun4i_gpadc_iio *info)
 +{
 +	u32 value;
 +
 +	if (info->data->ctrl0_map)
 +		regmap_write(info->regmap, SUNXI_THS_CTRL0,
 +			info->data->ctrl0_map);
 +
 +	regmap_write(info->regmap, SUNXI_THS_CTRL2,
 +		info->data->ctrl2_map);
 +
 +	regmap_write(info->regmap, SUNXI_THS_FILTER,
 +		info->data->filter_map);
 +
 +	regmap_read(info->regmap, SUNXI_THS_CTRL2, &value);
 +
 +	regmap_write(info->regmap, SUNXI_THS_CTRL2,
 +		info->data->sensor_en_map | value);
 +
 +	return 0;
 +}
 +
 +static int sun4i_gpadc_runtime_resume(struct device *dev)
 +{
 +	struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
 +
 +	return info->data->sample_start(info);
 +}
 +
 static int sun4i_gpadc_get_temp(void *data, int *temp)
 {
 	struct sun4i_gpadc_iio *info = data;
 diff --git a/include/linux/mfd/sun4i-gpadc.h b/include/linux/mfd/sun4i-gpadc.h
 index 78d31984a222..39e096c3ddac 100644
 --- a/include/linux/mfd/sun4i-gpadc.h
 +++ b/include/linux/mfd/sun4i-gpadc.h
@@ -17,7 +17,6 @@
 #define SUN4I_GPADC_CTRL0_ADC_CLK_SELECT		BIT(22)
 #define SUN4I_GPADC_CTRL0_ADC_CLK_DIVIDER(x)		((GENMASK(1, 0) & (x)) << 20)
 #define SUN4I_GPADC_CTRL0_FS_DIV(x)			((GENMASK(3, 0) & (x)) << 16)
 -#define SUN4I_GPADC_CTRL0_T_ACQ(x)			(GENMASK(15, 0) & (x))
 #define SUN4I_GPADC_CTRL1				0x04
@@ -51,9 +50,6 @@
 #define SUN4I_GPADC_CTRL3				0x0c
 -#define SUN4I_GPADC_CTRL3_FILTER_EN			BIT(2)
 -#define SUN4I_GPADC_CTRL3_FILTER_TYPE(x)		(GENMASK(1, 0) & (x))
 -
 #define SUN4I_GPADC_TPR					0x18
 #define SUN4I_GPADC_TPR_TEMP_ENABLE			BIT(16)
@@ -90,6 +86,21 @@
 /* 10s delay before suspending the IP */
 #define SUN4I_GPADC_AUTOSUSPEND_DELAY			10000
 +/* SUNXI_THS COMMON REGISTERS + DEFINES */
 +#define SUNXI_THS_CTRL0					0x00
 +#define SUNXI_THS_CTRL2					0x40
 +#define SUNXI_THS_FILTER				0x70
 +
 +#define SUNXI_THS_FILTER_EN				BIT(2)
 +#define SUNXI_THS_FILTER_TYPE(x)			(GENMASK(1, 0) & (x))
 +#define SUNXI_THS_ACQ0(x)				(GENMASK(15, 0) & (x))
 +#define SUNXI_THS_ACQ1(x)				(GENMASK(31, 16) & ((x) << 16))
 +
 +#define SUNXI_THS_TEMP_SENSE_EN0			BIT(0)
 +#define SUNXI_THS_TEMP_SENSE_EN1			BIT(1)
 +#define SUNXI_THS_TEMP_SENSE_EN2			BIT(2)
 +#define SUNXI_THS_TEMP_SENSE_EN3			BIT(3)
 +
 struct sun4i_gpadc_dev {
 	struct device			*dev;
 	struct regmap			*regmap;
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0013-iio-adc-sun4i-gpadc-iio-rework-support-clocks-and-re.patch
+++ b/patch/kernel/sunxi-dev/0013-iio-adc-sun4i-gpadc-iio-rework-support-clocks-and-re.patch
@ -0,0 +1,168 @@
 From c2d19fecbff6a21b3ab351c7843ae27de0d10b5b Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Sun, 21 Jan 2018 22:23:00 +0100
 Subject: [PATCH 013/146] iio: adc: sun4i-gpadc-iio: rework: support clocks and
 reset
 For adding newer sensor some basic rework of the code is necessary.
 The SoCs after H3 has newer thermal sensor ADCs, which have two clock
 inputs (bus clock and sampling clock) and a reset. The registers are
 also re-arranged.
 This commit reworks the code, adds the process of the clocks and
 resets.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
 ---
 drivers/iio/adc/sun4i-gpadc-iio.c | 80 +++++++++++++++++++++++++++++++
 1 file changed, 80 insertions(+)
 diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
 index 363936b37c5a..1a80744bd472 100644
 --- a/drivers/iio/adc/sun4i-gpadc-iio.c
 +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -22,6 +22,7 @@
  * shutdown for not being used.
  */
 +#include <linux/clk.h>
 #include <linux/completion.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -31,6 +32,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 +#include <linux/reset.h>
 #include <linux/thermal.h>
 #include <linux/delay.h>
@@ -75,6 +77,9 @@ struct gpadc_data {
 	u32		ctrl2_map;
 	u32		sensor_en_map;
 	u32		filter_map;
 +	bool		has_bus_clk;
 +	bool		has_bus_rst;
 +	bool		has_mod_clk;
 };
 static const struct gpadc_data sun4i_gpadc_data = {
@@ -134,6 +139,9 @@ struct sun4i_gpadc_iio {
 	atomic_t			ignore_temp_data_irq;
 	const struct gpadc_data		*data;
 	bool				no_irq;
 +	struct clk			*bus_clk;
 +	struct clk			*mod_clk;
 +	struct reset_control		*reset;
 	/* prevents concurrent reads of temperature and ADC */
 	struct mutex			mutex;
 	struct thermal_zone_device	*tzd;
@@ -435,6 +443,12 @@ static int sun4i_gpadc_runtime_suspend(struct device *dev)
 {
 	struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
 +	if (info->data->has_mod_clk)
 +		clk_disable(info->mod_clk);
 +
 +	if (info->data->has_bus_clk)
 +		clk_disable(info->bus_clk);
 +
 	return info->data->sample_end(info);
 }
@@ -483,6 +497,12 @@ static int sun4i_gpadc_runtime_resume(struct device *dev)
 {
 	struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
 +	if (info->data->has_mod_clk)
 +		clk_enable(info->mod_clk);
 +
 +	if (info->data->has_bus_clk)
 +		clk_enable(info->bus_clk);
 +
 	return info->data->sample_start(info);
 }
@@ -597,10 +617,61 @@ static int sun4i_gpadc_probe_dt(struct platform_device *pdev,
 		return ret;
 	}
 +	if (info->data->has_bus_rst) {
 +		info->reset = devm_reset_control_get(&pdev->dev, NULL);
 +		if (IS_ERR(info->reset)) {
 +			ret = PTR_ERR(info->reset);
 +			return ret;
 +		}
 +
 +		ret = reset_control_deassert(info->reset);
 +		if (ret)
 +			return ret;
 +	}
 +
 +	if (info->data->has_bus_clk) {
 +		info->bus_clk = devm_clk_get(&pdev->dev, "bus");
 +		if (IS_ERR(info->bus_clk)) {
 +			ret = PTR_ERR(info->bus_clk);
 +			goto assert_reset;
 +		}
 +
 +		ret = clk_prepare_enable(info->bus_clk);
 +		if (ret)
 +			goto assert_reset;
 +	}
 +
 +	if (info->data->has_mod_clk) {
 +		info->mod_clk = devm_clk_get(&pdev->dev, "mod");
 +		if (IS_ERR(info->mod_clk)) {
 +			ret = PTR_ERR(info->mod_clk);
 +			goto disable_bus_clk;
 +		}
 +
 +		/* Running at 6MHz */
 +		ret = clk_set_rate(info->mod_clk, 4000000);
 +		if (ret)
 +			goto disable_bus_clk;
 +
 +		ret = clk_prepare_enable(info->mod_clk);
 +		if (ret)
 +			goto disable_bus_clk;
 +	}
 +
 	if (IS_ENABLED(CONFIG_THERMAL_OF))
 		info->sensor_device = &pdev->dev;
 	return 0;
 +
 +disable_bus_clk:
 +	if (info->data->has_bus_clk)
 +		clk_disable_unprepare(info->bus_clk);
 +
 +assert_reset:
 +	if (info->data->has_bus_rst)
 +		reset_control_assert(info->reset);
 +
 +	return ret;
 }
 static int sun4i_gpadc_probe_mfd(struct platform_device *pdev,
@@ -766,6 +837,15 @@ static int sun4i_gpadc_remove(struct platform_device *pdev)
 	if (!info->no_irq)
 		iio_map_array_unregister(indio_dev);
 +	if (info->data->has_mod_clk)
 +		clk_disable_unprepare(info->mod_clk);
 +
 +	if (info->data->has_bus_clk)
 +		clk_disable_unprepare(info->bus_clk);
 +
 +	if (info->data->has_bus_rst)
 +		reset_control_assert(info->reset);
 +
 	return 0;
 }
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0014-iio-adc-sun4i-gpadc-iio-rework-support-multible-sens.patch
+++ b/patch/kernel/sunxi-dev/0014-iio-adc-sun4i-gpadc-iio-rework-support-multible-sens.patch
@ -0,0 +1,186 @@
 From e684b6faf4b5509f852867cac4830a0274f89211 Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Sun, 21 Jan 2018 22:26:50 +0100
 Subject: [PATCH 014/146] iio: adc: sun4i-gpadc-iio: rework: support multible
 sensors
 For adding newer sensor some basic rework of the code is necessary.
 This patch reworks the driver to be able to handle more than one
 thermal sensor. Newer SoC like the A80 have 4 thermal sensors.
 Because of this the maximal sensor count value was set to 4.
 The sensor_id value is set during sensor registration and is for each
 registered sensor indiviual. This makes it able to differntiate the
 sensors when the value is read from the register.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 drivers/iio/adc/sun4i-gpadc-iio.c | 36 ++++++++++++++++++++-----------
 include/linux/mfd/sun4i-gpadc.h   |  6 ++++++
 2 files changed, 29 insertions(+), 13 deletions(-)
 diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
 index 1a80744bd472..bff06f2798e8 100644
 --- a/drivers/iio/adc/sun4i-gpadc-iio.c
 +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -70,7 +70,7 @@ struct gpadc_data {
 	unsigned int	tp_adc_select;
 	unsigned int	(*adc_chan_select)(unsigned int chan);
 	unsigned int	adc_chan_mask;
 -	unsigned int	temp_data;
 +	unsigned int	temp_data[MAX_SENSOR_COUNT];
 	int		(*sample_start)(struct sun4i_gpadc_iio *info);
 	int		(*sample_end)(struct sun4i_gpadc_iio *info);
 	u32		ctrl0_map;
@@ -80,6 +80,7 @@ struct gpadc_data {
 	bool		has_bus_clk;
 	bool		has_bus_rst;
 	bool		has_mod_clk;
 +	int		sensor_count;
 };
 static const struct gpadc_data sun4i_gpadc_data = {
@@ -89,9 +90,10 @@ static const struct gpadc_data sun4i_gpadc_data = {
 	.tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
 	.adc_chan_select = &sun4i_gpadc_chan_select,
 	.adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
 -	.temp_data = SUN4I_GPADC_TEMP_DATA,
 +	.temp_data = {SUN4I_GPADC_TEMP_DATA, 0, 0, 0},
 	.sample_start = sun4i_gpadc_sample_start,
 	.sample_end = sun4i_gpadc_sample_end,
 +	.sensor_count = 1,
 };
 static const struct gpadc_data sun5i_gpadc_data = {
@@ -101,9 +103,10 @@ static const struct gpadc_data sun5i_gpadc_data = {
 	.tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
 	.adc_chan_select = &sun4i_gpadc_chan_select,
 	.adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
 -	.temp_data = SUN4I_GPADC_TEMP_DATA,
 +	.temp_data = {SUN4I_GPADC_TEMP_DATA, 0, 0, 0},
 	.sample_start = sun4i_gpadc_sample_start,
 	.sample_end = sun4i_gpadc_sample_end,
 +	.sensor_count = 1,
 };
 static const struct gpadc_data sun6i_gpadc_data = {
@@ -113,18 +116,20 @@ static const struct gpadc_data sun6i_gpadc_data = {
 	.tp_adc_select = SUN6I_GPADC_CTRL1_TP_ADC_SELECT,
 	.adc_chan_select = &sun6i_gpadc_chan_select,
 	.adc_chan_mask = SUN6I_GPADC_CTRL1_ADC_CHAN_MASK,
 -	.temp_data = SUN4I_GPADC_TEMP_DATA,
 +	.temp_data = {SUN4I_GPADC_TEMP_DATA, 0, 0, 0},
 	.sample_start = sun4i_gpadc_sample_start,
 	.sample_end = sun4i_gpadc_sample_end,
 +	.sensor_count = 1,
 };
 static const struct gpadc_data sun8i_a33_gpadc_data = {
 	.temp_offset = -1662,
 	.temp_scale = 162,
 	.tp_mode_en = SUN8I_A33_GPADC_CTRL1_CHOP_TEMP_EN,
 -	.temp_data = SUN4I_GPADC_TEMP_DATA,
 +	.temp_data = {SUN4I_GPADC_TEMP_DATA, 0, 0, 0},
 	.sample_start = sun4i_gpadc_sample_start,
 	.sample_end = sun4i_gpadc_sample_end,
 +	.sensor_count = 1,
 };
 struct sun4i_gpadc_iio {
@@ -142,6 +147,7 @@ struct sun4i_gpadc_iio {
 	struct clk			*bus_clk;
 	struct clk			*mod_clk;
 	struct reset_control		*reset;
 +	int				sensor_id;
 	/* prevents concurrent reads of temperature and ADC */
 	struct mutex			mutex;
 	struct thermal_zone_device	*tzd;
@@ -309,14 +315,15 @@ static int sun4i_gpadc_adc_read(struct iio_dev *indio_dev, int channel,
 	return sun4i_gpadc_read(indio_dev, channel, val, info->fifo_data_irq);
 }
 -static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val)
 +static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val,
 +				int sensor)
 {
 	struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
 	if (info->no_irq) {
 		pm_runtime_get_sync(indio_dev->dev.parent);
 -		regmap_read(info->regmap, info->data->temp_data, val);
 +		regmap_read(info->regmap, info->data->temp_data[sensor], val);
 		pm_runtime_mark_last_busy(indio_dev->dev.parent);
 		pm_runtime_put_autosuspend(indio_dev->dev.parent);
@@ -363,7 +370,7 @@ static int sun4i_gpadc_read_raw(struct iio_dev *indio_dev,
 			ret = sun4i_gpadc_adc_read(indio_dev, chan->channel,
 						   val);
 		else
 -			ret = sun4i_gpadc_temp_read(indio_dev, val);
 +			ret = sun4i_gpadc_temp_read(indio_dev, val, 0);
 		if (ret)
 			return ret;
@@ -511,7 +518,7 @@ static int sun4i_gpadc_get_temp(void *data, int *temp)
 	struct sun4i_gpadc_iio *info = data;
 	int val, scale, offset;
 -	if (sun4i_gpadc_temp_read(info->indio_dev, &val))
 +	if (sun4i_gpadc_temp_read(info->indio_dev, &val, info->sensor_id))
 		return -ETIMEDOUT;
 	sun4i_gpadc_temp_scale(info->indio_dev, &scale);
@@ -755,7 +762,7 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
 {
 	struct sun4i_gpadc_iio *info;
 	struct iio_dev *indio_dev;
 -	int ret;
 +	int ret, i;
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
 	if (!indio_dev)
@@ -788,9 +795,12 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 	if (IS_ENABLED(CONFIG_THERMAL_OF)) {
 -		info->tzd = thermal_zone_of_sensor_register(info->sensor_device,
 -							    0, info,
 -							    &sun4i_ts_tz_ops);
 +		for (i = 0; i < info->data->sensor_count; i++) {
 +			info->sensor_id = i;
 +			info->tzd = thermal_zone_of_sensor_register(
 +					info->sensor_device,
 +					i, info, &sun4i_ts_tz_ops);
 +		}
 		/*
 		 * Do not fail driver probing when failing to register in
 		 * thermal because no thermal DT node is found.
 diff --git a/include/linux/mfd/sun4i-gpadc.h b/include/linux/mfd/sun4i-gpadc.h
 index 39e096c3ddac..40b4dd9d2405 100644
 --- a/include/linux/mfd/sun4i-gpadc.h
 +++ b/include/linux/mfd/sun4i-gpadc.h
@@ -90,6 +90,10 @@
 #define SUNXI_THS_CTRL0					0x00
 #define SUNXI_THS_CTRL2					0x40
 #define SUNXI_THS_FILTER				0x70
 +#define SUNXI_THS_TDATA0				0x80
 +#define SUNXI_THS_TDATA1				0x84
 +#define SUNXI_THS_TDATA2				0x88
 +#define SUNXI_THS_TDATA3				0x8c
 #define SUNXI_THS_FILTER_EN				BIT(2)
 #define SUNXI_THS_FILTER_TYPE(x)			(GENMASK(1, 0) & (x))
@@ -101,6 +105,8 @@
 #define SUNXI_THS_TEMP_SENSE_EN2			BIT(2)
 #define SUNXI_THS_TEMP_SENSE_EN3			BIT(3)
 +#define MAX_SENSOR_COUNT				4
 +
 struct sun4i_gpadc_dev {
 	struct device			*dev;
 	struct regmap			*regmap;
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0015-iio-adc-sun4i-gpadc-iio-rework-support-nvmem-calibra.patch
+++ b/patch/kernel/sunxi-dev/0015-iio-adc-sun4i-gpadc-iio-rework-support-nvmem-calibra.patch
@ -0,0 +1,166 @@
 From 9bb64076c49cf41aaa252ce7b5aa24b93c322bd5 Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Sun, 21 Jan 2018 22:29:55 +0100
 Subject: [PATCH 015/146] iio: adc: sun4i-gpadc-iio: rework: support nvmem
 calibration data
 This patch reworks the driver to support nvmem calibration cells.
 The driver checks if the nvmem calibration is supported and reads out
 the nvmem. At the beginning of the startup process the calibration data
 is written to the related registers.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 drivers/iio/adc/sun4i-gpadc-iio.c | 52 +++++++++++++++++++++++++++++++
 include/linux/mfd/sun4i-gpadc.h   |  2 ++
 2 files changed, 54 insertions(+)
 diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
 index bff06f2798e8..7b12666cdd9e 100644
 --- a/drivers/iio/adc/sun4i-gpadc-iio.c
 +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -27,6 +27,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
 +#include <linux/nvmem-consumer.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
@@ -81,6 +82,7 @@ struct gpadc_data {
 	bool		has_bus_rst;
 	bool		has_mod_clk;
 	int		sensor_count;
 +	bool		supports_nvmem;
 };
 static const struct gpadc_data sun4i_gpadc_data = {
@@ -94,6 +96,7 @@ static const struct gpadc_data sun4i_gpadc_data = {
 	.sample_start = sun4i_gpadc_sample_start,
 	.sample_end = sun4i_gpadc_sample_end,
 	.sensor_count = 1,
 +	.supports_nvmem = false,
 };
 static const struct gpadc_data sun5i_gpadc_data = {
@@ -107,6 +110,7 @@ static const struct gpadc_data sun5i_gpadc_data = {
 	.sample_start = sun4i_gpadc_sample_start,
 	.sample_end = sun4i_gpadc_sample_end,
 	.sensor_count = 1,
 +	.supports_nvmem = false,
 };
 static const struct gpadc_data sun6i_gpadc_data = {
@@ -120,6 +124,7 @@ static const struct gpadc_data sun6i_gpadc_data = {
 	.sample_start = sun4i_gpadc_sample_start,
 	.sample_end = sun4i_gpadc_sample_end,
 	.sensor_count = 1,
 +	.supports_nvmem = false,
 };
 static const struct gpadc_data sun8i_a33_gpadc_data = {
@@ -130,6 +135,7 @@ static const struct gpadc_data sun8i_a33_gpadc_data = {
 	.sample_start = sun4i_gpadc_sample_start,
 	.sample_end = sun4i_gpadc_sample_end,
 	.sensor_count = 1,
 +	.supports_nvmem = false,
 };
 struct sun4i_gpadc_iio {
@@ -148,6 +154,8 @@ struct sun4i_gpadc_iio {
 	struct clk			*mod_clk;
 	struct reset_control		*reset;
 	int				sensor_id;
 +	u32				calibration_data[2];
 +	bool				has_calibration_data[2];
 	/* prevents concurrent reads of temperature and ADC */
 	struct mutex			mutex;
 	struct thermal_zone_device	*tzd;
@@ -459,6 +467,17 @@ static int sun4i_gpadc_runtime_suspend(struct device *dev)
 	return info->data->sample_end(info);
 }
 +static void sunxi_calibrate(struct sun4i_gpadc_iio *info)
 +{
 +	if (info->has_calibration_data[0])
 +		regmap_write(info->regmap, SUNXI_THS_CDATA_0_1,
 +			info->calibration_data[0]);
 +
 +	if (info->has_calibration_data[1])
 +		regmap_write(info->regmap, SUNXI_THS_CDATA_2_3,
 +			info->calibration_data[1]);
 +}
 +
 static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info)
 {
 	/* clkin = 6MHz */
@@ -481,6 +500,7 @@ static int sun4i_gpadc_sample_start(struct sun4i_gpadc_iio *info)
 static int sunxi_ths_sample_start(struct sun4i_gpadc_iio *info)
 {
 	u32 value;
 +	sunxi_calibrate(info);
 	if (info->data->ctrl0_map)
 		regmap_write(info->regmap, SUNXI_THS_CTRL0,
@@ -602,6 +622,9 @@ static int sun4i_gpadc_probe_dt(struct platform_device *pdev,
 	struct resource *mem;
 	void __iomem *base;
 	int ret;
 +	struct nvmem_cell *cell;
 +	ssize_t cell_size;
 +	u64 *cell_data;
 	info->data = of_device_get_match_data(&pdev->dev);
 	if (!info->data)
@@ -616,6 +639,35 @@ static int sun4i_gpadc_probe_dt(struct platform_device *pdev,
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 +	info->has_calibration_data[0] = false;
 +	info->has_calibration_data[1] = false;
 +
 +	if (!info->data->supports_nvmem)
 +		goto no_nvmem;
 +
 +	cell = devm_nvmem_cell_get(&pdev->dev, "calibration");
 +	if (IS_ERR(cell)) {
 +		if (PTR_ERR(cell) == -EPROBE_DEFER)
 +			return PTR_ERR(cell);
 +	} else {
 +		cell_data = (u64 *)nvmem_cell_read(cell, &cell_size);
 +		devm_nvmem_cell_put(&pdev->dev, cell);
 +		if (cell_size <= 4) {
 +			info->has_calibration_data[0] = true;
 +			info->calibration_data[0] = be32_to_cpu(cell_data[0] &
 +					GENMASK(31, 0));
 +		} else if (cell_size <= 8) {
 +			info->has_calibration_data[0] = true;
 +			info->calibration_data[0] = be32_to_cpu(cell_data[0] &
 +					GENMASK(31, 0));
 +			info->has_calibration_data[1] = true;
 +			info->calibration_data[1] = be32_to_cpu(
 +					(cell_data[0] >> 32) & GENMASK(31, 0));
 +		}
 +	}
 +
 +no_nvmem:
 +
 	info->regmap = devm_regmap_init_mmio(&pdev->dev, base,
 					     &sun4i_gpadc_regmap_config);
 	if (IS_ERR(info->regmap)) {
 diff --git a/include/linux/mfd/sun4i-gpadc.h b/include/linux/mfd/sun4i-gpadc.h
 index 40b4dd9d2405..c251002431bd 100644
 --- a/include/linux/mfd/sun4i-gpadc.h
 +++ b/include/linux/mfd/sun4i-gpadc.h
@@ -90,6 +90,8 @@
 #define SUNXI_THS_CTRL0					0x00
 #define SUNXI_THS_CTRL2					0x40
 #define SUNXI_THS_FILTER				0x70
 +#define SUNXI_THS_CDATA_0_1				0x74
 +#define SUNXI_THS_CDATA_2_3				0x78
 #define SUNXI_THS_TDATA0				0x80
 #define SUNXI_THS_TDATA1				0x84
 #define SUNXI_THS_TDATA2				0x88
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0016-iio-adc-sun4i-gpadc-iio-rework-add-interrupt-support.patch
+++ b/patch/kernel/sunxi-dev/0016-iio-adc-sun4i-gpadc-iio-rework-add-interrupt-support.patch
@ -0,0 +1,253 @@
 From 153c005037601e2ba02f7fb36d8864194d8c98c8 Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Sun, 21 Jan 2018 11:20:55 +0100
 Subject: [PATCH 016/146] iio: adc: sun4i-gpadc-iio: rework: add interrupt
 support
 This patch rewors the driver to support interrupts for the thermal part
 of the sensor.
 This is only available for the newer sensor (currently H3 and A83T).
 The interrupt will be trigerd on data available and triggers the update
 for the thermal sensors. All newer sensors have different amount of
 sensors and different interrupts for each device the reset of the
 interrupts need to be done different
 For the newer sensors is the autosuspend disabled.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 drivers/iio/adc/sun4i-gpadc-iio.c | 68 ++++++++++++++++++++++++++++---
 include/linux/mfd/sun4i-gpadc.h   | 33 +++++++++++++++
 2 files changed, 95 insertions(+), 6 deletions(-)
 diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
 index 7b12666cdd9e..77e07f042730 100644
 --- a/drivers/iio/adc/sun4i-gpadc-iio.c
 +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -78,11 +78,14 @@ struct gpadc_data {
 	u32		ctrl2_map;
 	u32		sensor_en_map;
 	u32		filter_map;
 +	u32		irq_clear_map;
 +	u32		irq_control_map;
 	bool		has_bus_clk;
 	bool		has_bus_rst;
 	bool		has_mod_clk;
 	int		sensor_count;
 	bool		supports_nvmem;
 +	bool		support_irq;
 };
 static const struct gpadc_data sun4i_gpadc_data = {
@@ -97,6 +100,7 @@ static const struct gpadc_data sun4i_gpadc_data = {
 	.sample_end = sun4i_gpadc_sample_end,
 	.sensor_count = 1,
 	.supports_nvmem = false,
 +	.support_irq = false,
 };
 static const struct gpadc_data sun5i_gpadc_data = {
@@ -111,6 +115,7 @@ static const struct gpadc_data sun5i_gpadc_data = {
 	.sample_end = sun4i_gpadc_sample_end,
 	.sensor_count = 1,
 	.supports_nvmem = false,
 +	.support_irq = false,
 };
 static const struct gpadc_data sun6i_gpadc_data = {
@@ -125,6 +130,7 @@ static const struct gpadc_data sun6i_gpadc_data = {
 	.sample_end = sun4i_gpadc_sample_end,
 	.sensor_count = 1,
 	.supports_nvmem = false,
 +	.support_irq = false,
 };
 static const struct gpadc_data sun8i_a33_gpadc_data = {
@@ -136,6 +142,7 @@ static const struct gpadc_data sun8i_a33_gpadc_data = {
 	.sample_end = sun4i_gpadc_sample_end,
 	.sensor_count = 1,
 	.supports_nvmem = false,
 +	.support_irq = false,
 };
 struct sun4i_gpadc_iio {
@@ -339,6 +346,11 @@ static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val,
 		return 0;
 	}
 +	if (info->data->support_irq) {
 +		regmap_read(info->regmap, info->data->temp_data[sensor], val);
 +		return 0;
 +	}
 +
 	return sun4i_gpadc_read(indio_dev, 0, val, info->temp_data_irq);
 }
@@ -436,6 +448,17 @@ static irqreturn_t sun4i_gpadc_fifo_data_irq_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 +static irqreturn_t sunxi_irq_thread(int irq, void *data)
 +{
 +	struct sun4i_gpadc_iio *info = data;
 +
 +	regmap_write(info->regmap, SUNXI_THS_STAT, info->data->irq_clear_map);
 +
 +	thermal_zone_device_update(info->tzd, THERMAL_EVENT_TEMP_SAMPLE);
 +
 +	return IRQ_HANDLED;
 +}
 +
 static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info)
 {
 	/* Disable the ADC on IP */
@@ -448,6 +471,8 @@ static int sun4i_gpadc_sample_end(struct sun4i_gpadc_iio *info)
 static int sunxi_ths_sample_end(struct sun4i_gpadc_iio *info)
 {
 +	/* Disable ths interrupt*/
 +	regmap_write(info->regmap, SUNXI_THS_INTC, 0x0);
 	/* Disable temperature sensor */
 	regmap_write(info->regmap, SUNXI_THS_CTRL2, 0x0);
@@ -509,9 +534,15 @@ static int sunxi_ths_sample_start(struct sun4i_gpadc_iio *info)
 	regmap_write(info->regmap, SUNXI_THS_CTRL2,
 		info->data->ctrl2_map);
 +	regmap_write(info->regmap, SUNXI_THS_STAT,
 +			info->data->irq_clear_map);
 +
 	regmap_write(info->regmap, SUNXI_THS_FILTER,
 		info->data->filter_map);
 +	regmap_write(info->regmap, SUNXI_THS_INTC,
 +		info->data->irq_control_map);
 +
 	regmap_read(info->regmap, SUNXI_THS_CTRL2, &value);
 	regmap_write(info->regmap, SUNXI_THS_CTRL2,
@@ -625,12 +656,29 @@ static int sun4i_gpadc_probe_dt(struct platform_device *pdev,
 	struct nvmem_cell *cell;
 	ssize_t cell_size;
 	u64 *cell_data;
 +	int irq;
 	info->data = of_device_get_match_data(&pdev->dev);
 	if (!info->data)
 		return -ENODEV;
 -	info->no_irq = true;
 +	if (info->data->support_irq) {
 +		/* only the new versions of ths support right now irqs */
 +		irq = platform_get_irq(pdev, 0);
 +		if (irq < 0) {
 +			dev_err(&pdev->dev, "failed to get IRQ: %d\n", irq);
 +			return irq;
 +		}
 +
 +		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
 +				sunxi_irq_thread, IRQF_ONESHOT,
 +				dev_name(&pdev->dev), info);
 +		if (ret)
 +			return ret;
 +
 +	} else
 +		info->no_irq = true;
 +
 	indio_dev->num_channels = ARRAY_SIZE(sun8i_a33_gpadc_channels);
 	indio_dev->channels = sun8i_a33_gpadc_channels;
@@ -840,11 +888,13 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 -	pm_runtime_set_autosuspend_delay(&pdev->dev,
 -					 SUN4I_GPADC_AUTOSUSPEND_DELAY);
 -	pm_runtime_use_autosuspend(&pdev->dev);
 -	pm_runtime_set_suspended(&pdev->dev);
 -	pm_runtime_enable(&pdev->dev);
 +	if (!info->data->support_irq) {
 +		pm_runtime_set_autosuspend_delay(&pdev->dev,
 +						 SUN4I_GPADC_AUTOSUSPEND_DELAY);
 +		pm_runtime_use_autosuspend(&pdev->dev);
 +		pm_runtime_set_suspended(&pdev->dev);
 +		pm_runtime_enable(&pdev->dev);
 +	}
 	if (IS_ENABLED(CONFIG_THERMAL_OF)) {
 		for (i = 0; i < info->data->sensor_count; i++) {
@@ -865,6 +915,9 @@ static int sun4i_gpadc_probe(struct platform_device *pdev)
 		}
 	}
 +	if (info->data->support_irq)
 +		info->data->sample_start(info);
 +
 	ret = devm_iio_device_register(&pdev->dev, indio_dev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "could not register the device\n");
@@ -894,6 +947,9 @@ static int sun4i_gpadc_remove(struct platform_device *pdev)
 	if (!IS_ENABLED(CONFIG_THERMAL_OF))
 		return 0;
 +	if (info->data->support_irq)
 +		info->data->sample_end(info);
 +
 	thermal_zone_of_sensor_unregister(info->sensor_device, info->tzd);
 	if (!info->no_irq)
 diff --git a/include/linux/mfd/sun4i-gpadc.h b/include/linux/mfd/sun4i-gpadc.h
 index c251002431bd..ab34a96a7ff3 100644
 --- a/include/linux/mfd/sun4i-gpadc.h
 +++ b/include/linux/mfd/sun4i-gpadc.h
@@ -89,6 +89,8 @@
 /* SUNXI_THS COMMON REGISTERS + DEFINES */
 #define SUNXI_THS_CTRL0					0x00
 #define SUNXI_THS_CTRL2					0x40
 +#define SUNXI_THS_INTC					0x44
 +#define SUNXI_THS_STAT					0x48
 #define SUNXI_THS_FILTER				0x70
 #define SUNXI_THS_CDATA_0_1				0x74
 #define SUNXI_THS_CDATA_2_3				0x78
@@ -107,6 +109,37 @@
 #define SUNXI_THS_TEMP_SENSE_EN2			BIT(2)
 #define SUNXI_THS_TEMP_SENSE_EN3			BIT(3)
 +#define SUNXI_THS_TEMP_PERIOD(x)			(GENMASK(31, 12) & ((x) << 12))
 +
 +#define SUNXI_THS_INTS_ALARM_OFF_2			BIT(14)
 +#define SUNXI_THS_INTS_ALARM_OFF_1			BIT(13)
 +#define SUNXI_THS_INTS_ALARM_OFF_0			BIT(12)
 +#define SUNXI_THS_INTS_TDATA_IRQ_3			BIT(11)
 +#define SUNXI_THS_INTS_TDATA_IRQ_2			BIT(10)
 +#define SUNXI_THS_INTS_TDATA_IRQ_1			BIT(9)
 +#define SUNXI_THS_INTS_TDATA_IRQ_0			BIT(8)
 +#define SUNXI_THS_INTS_SHUT_INT_3			BIT(7)
 +#define SUNXI_THS_INTS_SHUT_INT_2			BIT(6)
 +#define SUNXI_THS_INTS_SHUT_INT_1			BIT(5)
 +#define SUNXI_THS_INTS_SHUT_INT_0			BIT(4)
 +#define SUNXI_THS_INTS_ALARM_INT_3			BIT(3)
 +#define SUNXI_THS_INTS_ALARM_INT_2			BIT(2)
 +#define SUNXI_THS_INTS_ALARM_INT_1			BIT(1)
 +#define SUNXI_THS_INTS_ALARM_INT_0			BIT(0)
 +
 +#define SUNXI_THS_INTC_TDATA_IRQ_EN3			BIT(11)
 +#define SUNXI_THS_INTC_TDATA_IRQ_EN2			BIT(10)
 +#define SUNXI_THS_INTC_TDATA_IRQ_EN1			BIT(9)
 +#define SUNXI_THS_INTC_TDATA_IRQ_EN0			BIT(8)
 +#define SUNXI_THS_INTC_SHUT_INT_EN3			BIT(7)
 +#define SUNXI_THS_INTC_SHUT_INT_EN2			BIT(6)
 +#define SUNXI_THS_INTC_SHUT_INT_EN1			BIT(5)
 +#define SUNXI_THS_INTC_SHUT_INT_EN0			BIT(4)
 +#define SUNXI_THS_INTC_ALARM_INT_EN3			BIT(3)
 +#define SUNXI_THS_INTC_ALARM_INT_EN2			BIT(2)
 +#define SUNXI_THS_INTC_ALARM_INT_EN1			BIT(1)
 +#define SUNXI_THS_INTC_ALARM_INT_EN0			BIT(0)
 +
 #define MAX_SENSOR_COUNT				4
 struct sun4i_gpadc_dev {
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0017-iio-adc-sun4i-gpadc-iio-add-support-for-H3-thermal-s.patch
+++ b/patch/kernel/sunxi-dev/0017-iio-adc-sun4i-gpadc-iio-add-support-for-H3-thermal-s.patch
@ -0,0 +1,67 @@
 From 1968a84bd7cfdf60b29a154e682c4239bdfe6cb7 Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Sun, 21 Jan 2018 23:14:09 +0100
 Subject: [PATCH 017/146] iio: adc: sun4i-gpadc-iio: add support for H3 thermal
 sensor
 This patch adds support for the H3 ths sensor.
 The H3 supports interrupts. The interrupt is configured to update the
 the sensor values every second. The calibration data is writen at the
 begin of the init process.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 drivers/iio/adc/sun4i-gpadc-iio.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
 diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
 index 77e07f042730..f2e0ec65c53e 100644
 --- a/drivers/iio/adc/sun4i-gpadc-iio.c
 +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -145,6 +145,31 @@ static const struct gpadc_data sun8i_a33_gpadc_data = {
 	.support_irq = false,
 };
 +static const struct gpadc_data sun8i_h3_ths_data = {
 +	.temp_offset = -1791,
 +	.temp_scale = -121,
 +	.temp_data = {SUNXI_THS_TDATA0, 0, 0, 0},
 +	.sample_start = sunxi_ths_sample_start,
 +	.sample_end = sunxi_ths_sample_end,
 +	.has_bus_clk = true,
 +	.has_bus_rst = true,
 +	.has_mod_clk = true,
 +	.sensor_count = 1,
 +	.supports_nvmem = true,
 +	.support_irq = true,
 +	.ctrl0_map = SUNXI_THS_ACQ0(0xff),
 +	.ctrl2_map = SUNXI_THS_ACQ1(0x3f),
 +	.sensor_en_map = SUNXI_THS_TEMP_SENSE_EN0,
 +	.filter_map = SUNXI_THS_FILTER_EN |
 +		SUNXI_THS_FILTER_TYPE(0x2),
 +	.irq_clear_map = SUNXI_THS_INTS_ALARM_INT_0 |
 +			SUNXI_THS_INTS_SHUT_INT_0   |
 +			SUNXI_THS_INTS_TDATA_IRQ_0  |
 +			SUNXI_THS_INTS_ALARM_OFF_0,
 +	.irq_control_map = SUNXI_THS_INTC_TDATA_IRQ_EN0 |
 +		SUNXI_THS_TEMP_PERIOD(0x7),
 +};
 +
 struct sun4i_gpadc_iio {
 	struct iio_dev			*indio_dev;
 	struct completion		completion;
@@ -643,6 +668,10 @@ static const struct of_device_id sun4i_gpadc_of_id[] = {
 		.compatible = "allwinner,sun8i-a33-ths",
 		.data = &sun8i_a33_gpadc_data,
 	},
 +	{
 +		.compatible = "allwinner,sun8i-h3-ths",
 +		.data = &sun8i_h3_ths_data,
 +	},
 	{ /* sentinel */ }
 };
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0018-iio-adc-sun4i-gpadc-iio-add-support-for-A83T-thermal.patch
+++ b/patch/kernel/sunxi-dev/0018-iio-adc-sun4i-gpadc-iio-add-support-for-A83T-thermal.patch
@ -0,0 +1,75 @@
 From 20484f59a26747db157563c9ba13767c21b48efb Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Sun, 21 Jan 2018 18:50:11 +0100
 Subject: [PATCH 018/146] iio: adc: sun4i-gpadc-iio: add support for A83T
 thermal sensor
 This patch adds support for the A83T ths sensor.
 The A83T does not support interrupts. This seems to be broken.
 The calibration data is writen at the begin of the init process.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 drivers/iio/adc/sun4i-gpadc-iio.c | 38 +++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
 index f2e0ec65c53e..b8693afcdbea 100644
 --- a/drivers/iio/adc/sun4i-gpadc-iio.c
 +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -170,6 +170,40 @@ static const struct gpadc_data sun8i_h3_ths_data = {
 		SUNXI_THS_TEMP_PERIOD(0x7),
 };
 +static const struct gpadc_data sun8i_a83t_ths_data = {
 +	.temp_offset = -2724,
 +	.temp_scale = -70,
 +	.temp_data = {SUNXI_THS_TDATA0,
 +		SUNXI_THS_TDATA1,
 +		SUNXI_THS_TDATA2,
 +		0},
 +	.sample_start = sunxi_ths_sample_start,
 +	.sample_end = sunxi_ths_sample_end,
 +	.sensor_count = 3,
 +	.supports_nvmem = false,
 +	.support_irq = true,
 +	.ctrl0_map = SUNXI_THS_ACQ0(0x1f3),
 +	.ctrl2_map = SUNXI_THS_ACQ1(0x1f3),
 +	.sensor_en_map = SUNXI_THS_TEMP_SENSE_EN0 |
 +		SUNXI_THS_TEMP_SENSE_EN1 |
 +		SUNXI_THS_TEMP_SENSE_EN2,
 +	.filter_map = SUNXI_THS_FILTER_EN |
 +		SUNXI_THS_FILTER_TYPE(0x2),
 +	.irq_clear_map = SUNXI_THS_INTS_ALARM_INT_0 |
 +		SUNXI_THS_INTS_ALARM_INT_1 |
 +		SUNXI_THS_INTS_ALARM_INT_2 |
 +		SUNXI_THS_INTS_SHUT_INT_0  |
 +		SUNXI_THS_INTS_SHUT_INT_1  |
 +		SUNXI_THS_INTS_SHUT_INT_2  |
 +		SUNXI_THS_INTS_TDATA_IRQ_0 |
 +		SUNXI_THS_INTS_TDATA_IRQ_1 |
 +		SUNXI_THS_INTS_TDATA_IRQ_2,
 +	.irq_control_map = SUNXI_THS_INTC_TDATA_IRQ_EN0 |
 +		SUNXI_THS_INTC_TDATA_IRQ_EN1 |
 +		SUNXI_THS_INTC_TDATA_IRQ_EN2 |
 +		SUNXI_THS_TEMP_PERIOD(0x257),
 +};
 +
 struct sun4i_gpadc_iio {
 	struct iio_dev			*indio_dev;
 	struct completion		completion;
@@ -672,6 +706,10 @@ static const struct of_device_id sun4i_gpadc_of_id[] = {
 		.compatible = "allwinner,sun8i-h3-ths",
 		.data = &sun8i_h3_ths_data,
 	},
 +	{
 +		.compatible = "allwinner,sun8i-a83t-ths",
 +		.data = &sun8i_a83t_ths_data,
 +	},
 	{ /* sentinel */ }
 };
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0020-arm-dts-sun8i-h3-add-support-for-the-thermal-sensor-.patch
+++ b/patch/kernel/sunxi-dev/0020-arm-dts-sun8i-h3-add-support-for-the-thermal-sensor-.patch
@ -0,0 +1,30 @@
 From e475b475fbab608b805a57c8cc083e7b3da77954 Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Fri, 26 Jan 2018 01:07:15 +0100
 Subject: [PATCH 020/146] arm: dts: sun8i: h3: add support for the thermal
 sensor in H3
 This patch adds the missing compatible and the thermal sensor cells.
 The H3 has one sensor.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 arch/arm/boot/dts/sun8i-h3.dtsi | 5 +++++
 1 file changed, 5 insertions(+)
 diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
 index f0096074a467..5907b54b6e1d 100644
 --- a/arch/arm/boot/dts/sun8i-h3.dtsi
 +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -216,3 +216,8 @@
 &pio {
 	compatible = "allwinner,sun8i-h3-pinctrl";
 };
 +
 +&ths {
 +	compatible = "allwinner,sun8i-h3-ths";
 +	#thermal-sensor-cells = <0>;
 +};
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0021-arm-dts-sun8i-h3-add-thermal-zone-to-H3.patch
+++ b/patch/kernel/sunxi-dev/0021-arm-dts-sun8i-h3-add-thermal-zone-to-H3.patch
@ -0,0 +1,36 @@
 From 16346f511d19e20e12041076f402606b87de0b56 Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Fri, 26 Jan 2018 01:10:12 +0100
 Subject: [PATCH 021/146] arm: dts: sun8i: h3: add thermal zone to H3
 This patch adds the thermal zones to the H3. We have only one sensor and
 that is placed in the cpu.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)
 diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
 index 5907b54b6e1d..d2c85be8a2d0 100644
 --- a/arch/arm/boot/dts/sun8i-h3.dtsi
 +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -111,6 +111,15 @@
 		};
 	};
 +	thermal-zones {
 +		cpu-thermal {
 +			/* milliseconds */
 +			polling-delay-passive = <250>;
 +			polling-delay = <1000>;
 +			thermal-sensors = <&ths 0>;
 +		};
 +	};
 +
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0022-arm-dts-sun8i-h3-enable-H3-sid-controller.patch.disabled
+++ b/patch/kernel/sunxi-dev/0022-arm-dts-sun8i-h3-enable-H3-sid-controller.patch.disabled
@ -0,0 +1,34 @@
 From 328b1316b4a89f2bf9e451f3cfa41d591962c44e Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Tue, 23 Jan 2018 10:57:37 +0100
 Subject: [PATCH 022/146] arm: dts: sun8i: h3: enable H3 sid controller
 This patch enables the the sid controller in the H3. It can be used
 for thermal calibration data.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 arch/arm/boot/dts/sun8i-h3.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)
 diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
 index d2c85be8a2d0..791a9406c671 100644
 --- a/arch/arm/boot/dts/sun8i-h3.dtsi
 +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -111,6 +111,13 @@
 		};
 	};
 +	soc {
 +		sid: eeprom@1c14000 {
 +			compatible = "allwinner,sun8i-h3-sid";
 +			reg = <0x01c14000 0x400>;
 +		};
 +	};
 +
 	thermal-zones {
 		cpu-thermal {
 			/* milliseconds */
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0023-arm-dts-sun8i-a83t-add-support-for-the-thermal-senso.patch.disabled
+++ b/patch/kernel/sunxi-dev/0023-arm-dts-sun8i-a83t-add-support-for-the-thermal-senso.patch.disabled
@ -0,0 +1,38 @@
 From 4d9df1fab6b1601612b7b4380f83d3c4560c671e Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Fri, 26 Jan 2018 01:15:17 +0100
 Subject: [PATCH 023/146] arm: dts: sun8i: a83t: add support for the thermal
 sensor in A83T
 As we have gained the support for the thermal sensor in A83T,
 we can now add its device nodes to the device tree.
 The A83T seems to have a broken IRQ 31, thus we use here IRQ 41.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
 diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
 index 00a02b037320..6bdfcc7a1ac3 100644
 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
 +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -757,6 +757,14 @@
 			clocks = <&osc24M>;
 		};
 +		ths: thermal-sensor@1f04000 {
 +			compatible = "allwinner,sun8i-a83t-ths";
 +			reg = <0x01f04000 0x100>;
 +			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 +			#thermal-sensor-cells = <1>;
 +			#io-channel-cells = <0>;
 +		};
 +
 		watchdog@1c20ca0 {
 			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0024-arm-dts-sun8i-a83t-add-thermal-zone-to-A83T.patch.disabled
+++ b/patch/kernel/sunxi-dev/0024-arm-dts-sun8i-a83t-add-thermal-zone-to-A83T.patch.disabled
@ -0,0 +1,46 @@
 From 5bcffafbbcc98a66101d02d37ba6beca3f52068e Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Fri, 26 Jan 2018 01:17:14 +0100
 Subject: [PATCH 024/146] arm: dts: sun8i: a83t: add thermal zone to A83T
 This patch adds the thermal zones to the A83T. Sensor 0 is located in the
 cpu cluster 0. Sensor 1 is located in cluster 1 and Sensor 3 is located
 in the gpu.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 arch/arm/boot/dts/sun8i-a83t.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
 diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
 index 6bdfcc7a1ac3..ec22157419b6 100644
 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
 +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -1033,4 +1033,24 @@
 			#size-cells = <0>;
 		};
 	};
 +
 +	thermal-zones {
 +		cpu0_thermal: cpu0-thermal {
 +			polling-delay-passive = <1000>;
 +			polling-delay = <5000>;
 +			thermal-sensors = <&ths 0>;
 +		};
 +
 +		cpu1_thermal: cpu1-thermal {
 +			polling-delay-passive = <1000>;
 +			polling-delay = <5000>;
 +			thermal-sensors = <&ths 1>;
 +		};
 +
 +		gpu_thermal: gpu-thermal {
 +			polling-delay-passive = <1000>;
 +			polling-delay = <5000>;
 +			thermal-sensors = <&ths 2>;
 +		};
 +	};
 };
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0026-iio-adc-Kconfig-enable-A80-A64-and-H5-for-THS.patch
+++ b/patch/kernel/sunxi-dev/0026-iio-adc-Kconfig-enable-A80-A64-and-H5-for-THS.patch
@ -0,0 +1,26 @@
 From f79548364ea767853c5a95f1db2407219f06572a Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Wed, 24 Jan 2018 22:35:13 +0100
 Subject: [PATCH 026/146] iio: adc: Kconfig: enable A80, A64 and H5 for THS
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 drivers/iio/adc/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
 diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
 index 4a754921fb6f..c77aec60a364 100644
 --- a/drivers/iio/adc/Kconfig
 +++ b/drivers/iio/adc/Kconfig
@@ -723,7 +723,7 @@ config STX104
 config SUN4I_GPADC
 	tristate "Support for the Allwinner SoCs GPADC"
 	depends on IIO
 -	depends on MFD_SUN4I_GPADC || MACH_SUN8I
 +	depends on MFD_SUN4I_GPADC || MACH_SUN8I || MACH_SUN50I || MACH_SUN9I
 	depends on THERMAL || !THERMAL_OF
 	select REGMAP_IRQ
 	help
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0027-iio-adc-sun4i-gpadc-iio-add-support-for-H5-thermal-s.patch
+++ b/patch/kernel/sunxi-dev/0027-iio-adc-sun4i-gpadc-iio-add-support-for-H5-thermal-s.patch
@ -0,0 +1,79 @@
 From 46f1130b5286457e519c296a4b683747deb983cb Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Wed, 24 Jan 2018 16:58:30 +0100
 Subject: [PATCH 027/146] iio: adc: sun4i-gpadc-iio: add support for H5 thermal
 sensor
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
 This patch adds support for the H5 ths sensor.
 The H5 supports interrupts. The interrupt is configured to update
 the sensor values every second. The sensor is except the scale/offset
 values and an additional sensor for the gpu the same. A temperatur higer
 than 70°C needs an other formula. Since the operating temperatures maximum
 is 70°C this case was neglegted.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 drivers/iio/adc/sun4i-gpadc-iio.c | 36 +++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
 index b8693afcdbea..40529a197335 100644
 --- a/drivers/iio/adc/sun4i-gpadc-iio.c
 +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -204,6 +204,38 @@ static const struct gpadc_data sun8i_a83t_ths_data = {
 		SUNXI_THS_TEMP_PERIOD(0x257),
 };
 +static const struct gpadc_data sun50i_h5_ths_data = {
 +	.temp_offset = -1872,
 +	.temp_scale = -119,
 +	.temp_data = {SUNXI_THS_TDATA0,
 +		SUNXI_THS_TDATA1, 0, 0},
 +	.sample_start = sunxi_ths_sample_start,
 +	.sample_end = sunxi_ths_sample_end,
 +	.has_bus_clk = true,
 +	.has_bus_rst = true,
 +	.has_mod_clk = true,
 +	.sensor_count = 2,
 +	.supports_nvmem = false,
 +	.support_irq = true,
 +	.ctrl0_map = SUNXI_THS_ACQ0(0x1f3),
 +	.ctrl2_map = SUNXI_THS_ACQ1(0x1f3),
 +	.sensor_en_map = SUNXI_THS_TEMP_SENSE_EN0 |
 +		SUNXI_THS_TEMP_SENSE_EN1,
 +	.filter_map = SUNXI_THS_FILTER_EN |
 +		SUNXI_THS_FILTER_TYPE(0x2),
 +	.irq_clear_map = SUNXI_THS_INTS_ALARM_INT_0 |
 +		SUNXI_THS_INTS_ALARM_INT_1 |
 +		SUNXI_THS_INTS_SHUT_INT_0   |
 +		SUNXI_THS_INTS_SHUT_INT_1   |
 +		SUNXI_THS_INTS_TDATA_IRQ_0  |
 +		SUNXI_THS_INTS_TDATA_IRQ_1  |
 +		SUNXI_THS_INTS_ALARM_OFF_0  |
 +		SUNXI_THS_INTS_ALARM_OFF_1,
 +	.irq_control_map = SUNXI_THS_INTC_TDATA_IRQ_EN0 |
 +		SUNXI_THS_INTC_TDATA_IRQ_EN1 |
 +		SUNXI_THS_TEMP_PERIOD(0x3a),
 +};
 +
 struct sun4i_gpadc_iio {
 	struct iio_dev			*indio_dev;
 	struct completion		completion;
@@ -710,6 +742,10 @@ static const struct of_device_id sun4i_gpadc_of_id[] = {
 		.compatible = "allwinner,sun8i-a83t-ths",
 		.data = &sun8i_a83t_ths_data,
 	},
 +	{
 +		.compatible = "allwinner,sun50i-h5-ths",
 +		.data = &sun50i_h5_ths_data,
 +	},
 	{ /* sentinel */ }
 };
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0028-iio-adc-sun4i-gpadc-iio-add-support-for-A80-thermal-.patch
+++ b/patch/kernel/sunxi-dev/0028-iio-adc-sun4i-gpadc-iio-add-support-for-A80-thermal-.patch
@ -0,0 +1,86 @@
 From 413a3bde03c061d4b5affe25ad75f4dfe6e3282b Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Wed, 24 Jan 2018 17:28:02 +0100
 Subject: [PATCH 028/146] iio: adc: sun4i-gpadc-iio: add support for A80
 thermal sensor
 This patch adds support for the A80 ths sensor.
 The A80 has 4 sensors and supports interrupts. The interrupt is configured to update
 the sensor values every second. The A80 shares some registers with the
 integrated GPADC. ACQ0 must be set in the GPADC register with the offset
 0x00. In fact the GPADC and the THS use the same register base and also
 the same clocks and resets.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 drivers/iio/adc/sun4i-gpadc-iio.c | 46 +++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
 index 40529a197335..7ab175f0bd40 100644
 --- a/drivers/iio/adc/sun4i-gpadc-iio.c
 +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -236,6 +236,48 @@ static const struct gpadc_data sun50i_h5_ths_data = {
 		SUNXI_THS_TEMP_PERIOD(0x3a),
 };
 +static const struct gpadc_data sun9i_a80_ths_data = {
 +	.temp_offset = -2794,
 +	.temp_scale = -67,
 +	.temp_data = {SUNXI_THS_TDATA0,
 +		SUNXI_THS_TDATA1,
 +		SUNXI_THS_TDATA2,
 +		SUNXI_THS_TDATA3},
 +	.sample_start = sunxi_ths_sample_start,
 +	.sample_end = sunxi_ths_sample_end,
 +	.has_bus_clk = true,
 +	.has_bus_rst = true,
 +	.has_mod_clk = true,
 +	.sensor_count = 4,
 +	.supports_nvmem = false,
 +	.support_irq = true,
 +	.ctrl0_map = SUNXI_THS_ACQ0(0x1f3),
 +	.ctrl2_map = SUNXI_THS_TEMP_SENSE_EN0 |
 +		SUNXI_THS_TEMP_SENSE_EN1 |
 +		SUNXI_THS_TEMP_SENSE_EN2 |
 +		SUNXI_THS_TEMP_SENSE_EN3 |
 +		SUNXI_THS_ACQ1(0x1f3),
 +	.filter_map = SUNXI_THS_FILTER_EN |
 +		SUNXI_THS_FILTER_TYPE(0x2),
 +	.irq_clear_map = SUNXI_THS_INTS_ALARM_INT_0 |
 +		SUNXI_THS_INTS_ALARM_INT_1 |
 +		SUNXI_THS_INTS_ALARM_INT_2 |
 +		SUNXI_THS_INTS_ALARM_INT_3 |
 +		SUNXI_THS_INTS_SHUT_INT_0  |
 +		SUNXI_THS_INTS_SHUT_INT_1  |
 +		SUNXI_THS_INTS_SHUT_INT_2  |
 +		SUNXI_THS_INTS_SHUT_INT_3  |
 +		SUNXI_THS_INTS_TDATA_IRQ_0 |
 +		SUNXI_THS_INTS_TDATA_IRQ_1 |
 +		SUNXI_THS_INTS_TDATA_IRQ_2 |
 +		SUNXI_THS_INTS_TDATA_IRQ_3,
 +	.irq_control_map = SUNXI_THS_INTC_TDATA_IRQ_EN0 |
 +		SUNXI_THS_INTC_TDATA_IRQ_EN1 |
 +		SUNXI_THS_INTC_TDATA_IRQ_EN2 |
 +		SUNXI_THS_INTC_TDATA_IRQ_EN3 |
 +		SUNXI_THS_TEMP_PERIOD(0x3a),
 +};
 +
 struct sun4i_gpadc_iio {
 	struct iio_dev			*indio_dev;
 	struct completion		completion;
@@ -746,6 +788,10 @@ static const struct of_device_id sun4i_gpadc_of_id[] = {
 		.compatible = "allwinner,sun50i-h5-ths",
 		.data = &sun50i_h5_ths_data,
 	},
 +	{
 +		.compatible = "allwinner,sun9i-a80-ths",
 +		.data = &sun9i_a80_ths_data,
 +	},
 	{ /* sentinel */ }
 };
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0029-iio-adc-sun4i-gpadc-iio-add-support-for-A64-thermal-.patch
+++ b/patch/kernel/sunxi-dev/0029-iio-adc-sun4i-gpadc-iio-add-support-for-A64-thermal-.patch
@ -0,0 +1,87 @@
 From 5a1eb96e482c276f8bc81c18696748ecb20b3656 Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Wed, 24 Jan 2018 17:41:45 +0100
 Subject: [PATCH 029/146] iio: adc: sun4i-gpadc-iio: add support for A64
 thermal sensor
 This patch adds support for the A64 ths sensor.
 The A64 supports interrupts. The interrupt is configured to update
 the sensor values every second.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 drivers/iio/adc/sun4i-gpadc-iio.c | 50 +++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)
 diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
 index 7ab175f0bd40..fdfa01bad325 100644
 --- a/drivers/iio/adc/sun4i-gpadc-iio.c
 +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -278,6 +278,52 @@ static const struct gpadc_data sun9i_a80_ths_data = {
 		SUNXI_THS_TEMP_PERIOD(0x3a),
 };
 +static const struct gpadc_data sun50i_a64_ths_data = {
 +	.temp_offset = -2170,
 +	.temp_scale = -117,
 +	.temp_data = {SUNXI_THS_TDATA0,
 +		SUNXI_THS_TDATA1,
 +		SUNXI_THS_TDATA2,
 +		0},
 +	.sample_start = sunxi_ths_sample_start,
 +	.sample_end = sunxi_ths_sample_end,
 +	.has_bus_clk = true,
 +	.has_bus_rst = true,
 +	.has_mod_clk = true,
 +	.sensor_count = 3,
 +	.supports_nvmem = false,
 +	.support_irq = true,
 +
 +	/* The final sample period is calculated as follows:
 +	 * (THERMAL_PER + 1) * 4096 / 24MHz * 2^(FILTER_TYPE + 1)
 +	 *
 +	 * This results to about 1Hz with these settings.
 +	 */
 +	.ctrl0_map = SUNXI_THS_ACQ0(0xff),
 +	.ctrl2_map = SUNXI_THS_TEMP_SENSE_EN0 |
 +		SUNXI_THS_TEMP_SENSE_EN1 |
 +		SUNXI_THS_TEMP_SENSE_EN2 |
 +		SUNXI_THS_ACQ1(0x3f),
 +	.filter_map = SUNXI_THS_FILTER_EN |
 +		SUNXI_THS_FILTER_TYPE(0x1),
 +	.irq_clear_map = SUNXI_THS_INTS_ALARM_INT_0 |
 +		SUNXI_THS_INTS_ALARM_INT_1 |
 +		SUNXI_THS_INTS_ALARM_INT_2 |
 +		SUNXI_THS_INTS_SHUT_INT_0  |
 +		SUNXI_THS_INTS_SHUT_INT_1  |
 +		SUNXI_THS_INTS_SHUT_INT_2  |
 +		SUNXI_THS_INTS_TDATA_IRQ_0 |
 +		SUNXI_THS_INTS_TDATA_IRQ_1 |
 +		SUNXI_THS_INTS_TDATA_IRQ_2 |
 +		SUNXI_THS_INTS_ALARM_OFF_0 |
 +		SUNXI_THS_INTS_ALARM_OFF_1 |
 +		SUNXI_THS_INTS_ALARM_OFF_2,
 +	.irq_control_map = SUNXI_THS_INTC_TDATA_IRQ_EN0 |
 +		SUNXI_THS_INTC_TDATA_IRQ_EN1 |
 +		SUNXI_THS_INTC_TDATA_IRQ_EN2 |
 +		SUNXI_THS_TEMP_PERIOD(0x7),
 +};
 +
 struct sun4i_gpadc_iio {
 	struct iio_dev			*indio_dev;
 	struct completion		completion;
@@ -792,6 +838,10 @@ static const struct of_device_id sun4i_gpadc_of_id[] = {
 		.compatible = "allwinner,sun9i-a80-ths",
 		.data = &sun9i_a80_ths_data,
 	},
 +	{
 +		.compatible = "allwinner,sun50i-a64-ths",
 +		.data = &sun50i_a64_ths_data,
 +	},
 	{ /* sentinel */ }
 };
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0030-arm64-dts-allwinner-h5-add-support-for-the-thermal-s.patch
+++ b/patch/kernel/sunxi-dev/0030-arm64-dts-allwinner-h5-add-support-for-the-thermal-s.patch
@ -0,0 +1,30 @@
 From e6e2d489bd4776f62a962ad8f511d862a1864f80 Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Fri, 26 Jan 2018 01:40:38 +0100
 Subject: [PATCH 030/146] arm64: dts: allwinner: h5: add support for the
 thermal sensor in H5
 This patch adds the missing compatible and the thermal sensor cells.
 The H5 has two sensors.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 5 +++++
 1 file changed, 5 insertions(+)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
 index 62d646baac3c..ee12490203b8 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -129,3 +129,8 @@
 		     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 	compatible = "allwinner,sun50i-h5-pinctrl";
 };
 +
 +&ths {
 +	compatible = "allwinner,sun50i-h5-ths";
 +	#thermal-sensor-cells = <1>;
 +};
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0031-arm64-dts-allwinner-h5-add-termal-zone-to-H5.patch
+++ b/patch/kernel/sunxi-dev/0031-arm64-dts-allwinner-h5-add-termal-zone-to-H5.patch
@ -0,0 +1,43 @@
 From b3ec6c1e145347ad88b14fcab39080c5af9410ef Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Fri, 26 Jan 2018 01:42:16 +0100
 Subject: [PATCH 031/146] arm64: dts: allwinner: h5: add termal zone to H5
 This patch adds the termal zones to the H5. Sensor 0 is located in the
 cpu. Sensor 1 is located in the gpu.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
 index ee12490203b8..849c3d8a50bb 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -81,6 +81,22 @@
 		method = "smc";
 	};
 +	thermal-zones {
 +		cpu-thermal {
 +			/* milliseconds */
 +			polling-delay-passive = <250>;
 +			polling-delay = <1000>;
 +			thermal-sensors = <&ths 0>;
 +		};
 +
 +		gpu-thermal {
 +			/* milliseconds */
 +			polling-delay-passive = <250>;
 +			polling-delay = <1000>;
 +			thermal-sensors = <&ths 1>;
 +		};
 +	};
 +
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0032-arm-dts-sun9i-a80-add-support-for-the-thermal-sensor.patch
+++ b/patch/kernel/sunxi-dev/0032-arm-dts-sun9i-a80-add-support-for-the-thermal-sensor.patch
@ -0,0 +1,42 @@
 From 4990f2559d012df5c225df7cda3c29d60d3263b7 Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Sat, 27 Jan 2018 21:30:16 +0100
 Subject: [PATCH 032/146] arm: dts: sun9i: a80: add support for the thermal
 sensor in A80
 As we have gained the support for the thermal sensor in A80,
 we can now add its device nodes to the device tree.
 The clocks and the resets are shared between the GPADC and the THS
 sensor.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 arch/arm/boot/dts/sun9i-a80.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)
 diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
 index 25591d6883ef..9411831d04aa 100644
 --- a/arch/arm/boot/dts/sun9i-a80.dtsi
 +++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -913,6 +913,17 @@
 			#reset-cells = <1>;
 		};
 +		ths: thermal-sensor@6004C00 {
 +			compatible = "allwinner,sun9i-a80-ths";
 +			reg = <0x06004C00 0x100>;
 +			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 +			clocks = <&ccu CLK_BUS_GPADC>, <&ccu CLK_GPADC>;
 +			clock-names = "bus", "mod";
 +			resets = <&ccu RST_BUS_GPADC>;
 +			#thermal-sensor-cells = <1>;
 +			#io-channel-cells = <0>;
 +		};
 +
 		timer@6000c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x06000c00 0xa0>;
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0033-arm-dts-sun9i-a80-add-thermal-zone-to-A80.patch
+++ b/patch/kernel/sunxi-dev/0033-arm-dts-sun9i-a80-add-thermal-zone-to-A80.patch
@ -0,0 +1,54 @@
 From 559d5cc47ffd71a47da77424e251a8d21250cabb Mon Sep 17 00:00:00 2001
 From: Philipp Rossak <embed3d@gmail.com>
 Date: Sat, 27 Jan 2018 21:39:09 +0100
 Subject: [PATCH 033/146] arm: dts: sun9i: a80: add thermal zone to A80
 This patch adds the thermal zones to the A80.
 Sensor 0 is located besides the big CPU, sensor 1 is located besides the
 DRAM, sensor 2 is located besides the GPU and sensor 3 is located besides
 the small CPU.
 Signed-off-by: Philipp Rossak <embed3d@gmail.com>
 ---
 arch/arm/boot/dts/sun9i-a80.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)
 diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
 index 9411831d04aa..6c52b33dad84 100644
 --- a/arch/arm/boot/dts/sun9i-a80.dtsi
 +++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -1221,4 +1221,30 @@
 			#size-cells = <0>;
 		};
 	};
 +
 +	thermal-zones {
 +		cpu0_thermal: cpu0-thermal {
 +			polling-delay-passive = <1000>;
 +			polling-delay = <5000>;
 +			thermal-sensors = <&ths 0>;
 +		};
 +
 +		dram_thermal: dram-thermal {
 +			polling-delay-passive = <1000>;
 +			polling-delay = <5000>;
 +			thermal-sensors = <&ths 1>;
 +		};
 +
 +		gpu_thermal: gpu-thermal {
 +			polling-delay-passive = <1000>;
 +			polling-delay = <5000>;
 +			thermal-sensors = <&ths 2>;
 +		};
 +
 +		cpu2_thermal: cpu2-thermal {
 +			polling-delay-passive = <1000>;
 +			polling-delay = <5000>;
 +			thermal-sensors = <&ths 3>;
 +		};
 +	};
 };
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0034-dts-a64-ths.patch
+++ b/patch/kernel/sunxi-dev/0034-dts-a64-ths.patch
@ -0,0 +1,62 @@
 From ff4436bd3de240a1d0796d4c6f8bd676ff0925e1 Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Mon, 23 Apr 2018 23:24:41 -0700
 Subject: [PATCH 034/146] dts: a64 ths
 ---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 32 +++++++++++++++++++
 1 file changed, 32 insertions(+)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
 index 0b44018361cb..0eb482eb58b7 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -171,6 +171,27 @@
 		};
 	};
 +	thermal-zones {
 +		cpu_thermal: cpu0-thermal {
 +		       /* milliseconds */
 +		       polling-delay-passive = <250>;
 +		       polling-delay = <1000>;
 +		       thermal-sensors = <&ths 0>;
 +		};
 +		gpu0_thermal: gpu0-thermal {
 +		       /* milliseconds */
 +		       polling-delay-passive = <250>;
 +		       polling-delay = <1000>;
 +		       thermal-sensors = <&ths 1>;
 +		};
 +		gpu1_thermal: gpu1-thermal {
 +		       /* milliseconds */
 +		       polling-delay-passive = <250>;
 +		       polling-delay = <1000>;
 +		       thermal-sensors = <&ths 2>;
 +		};
 +	};
 +
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
@@ -536,6 +557,17 @@
 			status = "disabled";
 		};
 +		ths: thermal-sensor@1c25000 {
 +			compatible = "allwinner,sun50i-a64-ths";
 +			reg = <0x01c25000 0x100>;
 +			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 +			clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
 +			clock-names = "bus", "mod";
 +			resets = <&ccu RST_BUS_THS>;
 +			#io-channel-cells = <0>;
 +			#thermal-sensor-cells = <1>;
 +		};
 +
 		uart0: serial@1c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0035-clk-sunxi-ng-add-mux-and-pll-notifiers-for-A64-CPU-c.patch
+++ b/patch/kernel/sunxi-dev/0035-clk-sunxi-ng-add-mux-and-pll-notifiers-for-A64-CPU-c.patch
@ -0,0 +1,73 @@
 From 5afd98f6db25b34a96bfc7544681dbf40896c1fd Mon Sep 17 00:00:00 2001
 From: Icenowy Zheng <icenowy@aosc.io>
 Date: Sat, 23 Sep 2017 08:15:29 +0800
 Subject: [PATCH 035/146] clk: sunxi-ng: add mux and pll notifiers for A64 CPU
 clock
 The A64 PLL_CPU clock has the same instability if some factor changed
 without the PLL gated like other SoCs with sun6i-style CCU, e.g. A33,
 H3.
 Add the mux and pll notifiers for A64 CPU clock to workaround the
 problem.
 Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks")
 Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
 ---
 drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 28 ++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)
 diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
 index ee9c12cf3f08..1fe3c3fbc9bc 100644
 --- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
 +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -896,11 +896,26 @@ static const struct sunxi_ccu_desc sun50i_a64_ccu_desc = {
 	.num_resets	= ARRAY_SIZE(sun50i_a64_ccu_resets),
 };
 +static struct ccu_pll_nb sun50i_a64_pll_cpu_nb = {
 +	.common	= &pll_cpux_clk.common,
 +	/* copy from pll_cpux_clk */
 +	.enable	= BIT(31),
 +	.lock	= BIT(28),
 +};
 +
 +static struct ccu_mux_nb sun50i_a64_cpu_nb = {
 +	.common		= &cpux_clk.common,
 +	.cm		= &cpux_clk.mux,
 +	.delay_us	= 1, /* > 8 clock cycles at 24 MHz */
 +	.bypass_index	= 1, /* index of 24 MHz oscillator */
 +};
 +
 static int sun50i_a64_ccu_probe(struct platform_device *pdev)
 {
 	struct resource *res;
 	void __iomem *reg;
 	u32 val;
 +	int ret;
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	reg = devm_ioremap_resource(&pdev->dev, res);
@@ -914,7 +929,18 @@ static int sun50i_a64_ccu_probe(struct platform_device *pdev)
 	writel(0x515, reg + SUN50I_A64_PLL_MIPI_REG);
 -	return sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc);
 +	ret = sunxi_ccu_probe(pdev->dev.of_node, reg, &sun50i_a64_ccu_desc);
 +	if (ret)
 +		return ret;
 +
 +	/* Gate then ungate PLL CPU after any rate changes */
 +	ccu_pll_notifier_register(&sun50i_a64_pll_cpu_nb);
 +
 +	/* Reparent CPU during PLL CPU rate changes */
 +	ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
 +				  &sun50i_a64_cpu_nb);
 +
 +	return 0;
 }
 static const struct of_device_id sun50i_a64_ccu_ids[] = {
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0036-sun4i-gpadc-iio-ignore-zero-samples-to-avoid-force-p.patch
+++ b/patch/kernel/sunxi-dev/0036-sun4i-gpadc-iio-ignore-zero-samples-to-avoid-force-p.patch
@ -0,0 +1,31 @@
 From a6b5eb09bddbd0c331f41fefa2fd2f71a2cf9455 Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Tue, 24 Apr 2018 22:21:10 -0700
 Subject: [PATCH 036/146] sun4i-gpadc-iio: ignore zero samples to avoid force
 poweroff when reading first sample
 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
 ---
 drivers/iio/adc/sun4i-gpadc-iio.c | 6 ++++++
 1 file changed, 6 insertions(+)
 diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
 index fdfa01bad325..68256e73a4d2 100644
 --- a/drivers/iio/adc/sun4i-gpadc-iio.c
 +++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -751,6 +751,12 @@ static int sun4i_gpadc_get_temp(void *data, int *temp)
 	if (sun4i_gpadc_temp_read(info->indio_dev, &val, info->sensor_id))
 		return -ETIMEDOUT;
 +	/* Ignore first sample which is always zero. 0 is either too
 +	 * cold or too hot, so we can safely ignore it
 +	 */
 +	if (val == 0)
 +		return -ETIMEDOUT;
 +
 	sun4i_gpadc_temp_scale(info->indio_dev, &scale);
 	sun4i_gpadc_temp_offset(info->indio_dev, &offset);
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0037-a64-dvfs-wip.patch
+++ b/patch/kernel/sunxi-dev/0037-a64-dvfs-wip.patch
@ -0,0 +1,260 @@
 From b07dd371b1a1203a013f91da750259f7a2467fce Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Tue, 24 Apr 2018 22:21:27 -0700
 Subject: [PATCH 037/146] a64 dvfs wip
 Changed: Igor
 ---
 .../boot/dts/allwinner/sun50i-a64-pine64.dts  |   4 +
 .../dts/allwinner/sun50i-a64-pinebook.dts     |   4 +
 .../allwinner/sun50i-a64-sopine-baseboard.dts |   4 +
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 111 ++++++++++++++++--
 drivers/clk/sunxi-ng/ccu-sun50i-a64.h         |   1 -
 include/dt-bindings/clock/sun50i-a64-ccu.h    |   1 +
 6 files changed, 112 insertions(+), 13 deletions(-)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
 index 8c5dd99cc9ac..cdf5169f2a1a 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -69,6 +69,10 @@
 	};
 };
 +&cpu0 {
 +	cpu-supply = <&reg_dcdc2>;
 +};
 +
 &ehci0 {
 	status = "okay";
 };
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
 index 897e60cbe38d..b3698a8bb1d3 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -66,6 +66,10 @@
 	};
 };
 +&cpu0 {
 +       cpu-supply = <&reg_dcdc2>;
 +};
 +
 &ehci0 {
 	phys = <&usbphy 0>;
 	phy-names = "usb";
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
 index 8161895dde52..dc728b3b5556 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -69,6 +69,10 @@
 	};
 };
 +&cpu0 {
 +	cpu-supply = <&reg_dcdc2>;
 +};
 +
 &ehci0 {
 	status = "okay";
 };
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
 index 0eb482eb58b7..62b880f68d6a 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -49,6 +49,7 @@
 #include <dt-bindings/reset/sun50i-a64-ccu.h>
 #include <dt-bindings/reset/sun8i-de2.h>
 #include <dt-bindings/reset/sun8i-r-ccu.h>
 +#include <dt-bindings/thermal/thermal.h>
 / {
 	interrupt-parent = <&gic>;
@@ -79,6 +80,52 @@
 		};
 	};
 +	cpu0_opp_table: opp_table0 {
 +		compatible = "operating-points-v2";
 +		opp-shared;
 +
 +		opp-120000000 {
 +			opp-hz = /bits/ 64 <120000000>;
 +			opp-microvolt = <1040000>;
 +			clock-latency-ns = <244144>; /* 8 32k periods */
 +		};
 +		opp-648000000 {
 +			opp-hz = /bits/ 64 <648000000>;
 +			opp-microvolt = <1040000>;
 +			clock-latency-ns = <244144>; /* 8 32k periods */
 +		};
 +		opp-816000000 {
 +			opp-hz = /bits/ 64 <816000000>;
 +			opp-microvolt = <1100000>;
 +			clock-latency-ns = <244144>; /* 8 32k periods */
 +		};
 +		opp-912000000 {
 +			opp-hz = /bits/ 64 <912000000>;
 +			opp-microvolt = <1120000>;
 +			clock-latency-ns = <244144>; /* 8 32k periods */
 +		};
 +		opp-960000000 {
 +			opp-hz = /bits/ 64 <960000000>;
 +			opp-microvolt = <1160000>;
 +			clock-latency-ns = <244144>; /* 8 32k periods */
 +		};
 +		opp-1008000000 {
 +			opp-hz = /bits/ 64 <1008000000>;
 +			opp-microvolt = <1200000>;
 +			clock-latency-ns = <244144>; /* 8 32k periods */
 +		};
 +		opp-1056000000 {
 +			opp-hz = /bits/ 64 <1056000000>;
 +			opp-microvolt = <1240000>;
 +			clock-latency-ns = <244144>; /* 8 32k periods */
 +		};
 +		opp-1104000000 {
 +			opp-hz = /bits/ 64 <1104000000>;
 +			opp-microvolt = <1300000>;
 +			clock-latency-ns = <244144>; /* 8 32k periods */
 +		};
 +	};
 +
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -88,7 +135,11 @@
 			device_type = "cpu";
 			reg = <0>;
 			enable-method = "psci";
 +			clocks = <&ccu CLK_CPUX>;
 +			clock-names = "cpu";
 +			operating-points-v2 = <&cpu0_opp_table>;
 +			#cooling-cells = <2>;
 			next-level-cache = <&L2>;
 		};
 		cpu1: cpu@1 {
@@ -95,7 +146,8 @@
 			device_type = "cpu";
 			reg = <1>;
 			enable-method = "psci";
 +			operating-points-v2 = <&cpu0_opp_table>;
 			next-level-cache = <&L2>;
 		};
 		cpu2: cpu@2 {
@@ -102,7 +154,8 @@
 			device_type = "cpu";
 			reg = <2>;
 			enable-method = "psci";
 +			operating-points-v2 = <&cpu0_opp_table>;
 			next-level-cache = <&L2>;
 		};
 		cpu3: cpu@3 {
@@ -109,7 +162,8 @@
 			device_type = "cpu";
 			reg = <3>;
 			enable-method = "psci";
 +			operating-points-v2 = <&cpu0_opp_table>;
 			next-level-cache = <&L2>;
 		};
 	};
@@ -173,22 +227,55 @@
 	thermal-zones {
 		cpu_thermal: cpu0-thermal {
 -		       /* milliseconds */
 -		       polling-delay-passive = <250>;
 -		       polling-delay = <1000>;
 -		       thermal-sensors = <&ths 0>;
 +			/* milliseconds */
 +			polling-delay-passive = <250>;
 +			polling-delay = <1000>;
 +			thermal-sensors = <&ths 0>;
 +
 +			cooling-maps {
 +				map0 {
 +					trip = <&cpu_alert0>;
 +					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 +				};
 +				map1 {
 +					trip = <&cpu_alert1>;
 +					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 +				};
 +			};
 +			trips {
 +				cpu_alert0: cpu_alert0 {
 +					/* milliCelsius */
 +					temperature = <75000>;
 +					hysteresis = <2000>;
 +					type = "passive";
 +				};
 +
 +				cpu_alert1: cpu_alert1 {
 +					/* milliCelsius */
 +					temperature = <90000>;
 +					hysteresis = <2000>;
 +					type = "hot";
 +				};
 +
 +				cpu_crit: cpu_crit {
 +					/* milliCelsius */
 +					temperature = <110000>;
 +					hysteresis = <2000>;
 +					type = "critical";
 +				};
 +			};
 		};
 		gpu0_thermal: gpu0-thermal {
 -		       /* milliseconds */
 -		       polling-delay-passive = <250>;
 -		       polling-delay = <1000>;
 -		       thermal-sensors = <&ths 1>;
 +			/* milliseconds */
 +			polling-delay-passive = <250>;
 +			polling-delay = <1000>;
 +			thermal-sensors = <&ths 1>;
 		};
 		gpu1_thermal: gpu1-thermal {
 -		       /* milliseconds */
 -		       polling-delay-passive = <250>;
 -		       polling-delay = <1000>;
 -		       thermal-sensors = <&ths 2>;
 +			/* milliseconds */
 +			polling-delay-passive = <250>;
 +			polling-delay = <1000>;
 +			thermal-sensors = <&ths 2>;
 		};
 	};
 diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.h b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h
 index 061b6fbb4f95..91f79512cee4 100644
 --- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.h
 +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.h
@@ -43,7 +43,6 @@
 #define CLK_PLL_HSIC			18
 #define CLK_PLL_DE			19
 #define CLK_PLL_DDR1			20
 -#define CLK_CPUX			21
 #define CLK_AXI				22
 #define CLK_APB				23
 #define CLK_AHB1			24
 diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h b/include/dt-bindings/clock/sun50i-a64-ccu.h
 index d66432c6e675..d7f42dd22663 100644
 --- a/include/dt-bindings/clock/sun50i-a64-ccu.h
 +++ b/include/dt-bindings/clock/sun50i-a64-ccu.h
@@ -45,6 +45,7 @@
 #define CLK_PLL_PERIPH0		11
 +#define CLK_CPUX		21
 #define CLK_BUS_MIPI_DSI	28
 #define CLK_BUS_CE		29
 #define CLK_BUS_DMA		30
 --
 2.17.1
--- a/patch/kernel/sunxi-dev/0038-ARM-dts-add-gpu-node-to-exynos4.patch
+++ b/patch/kernel/sunxi-dev/0038-ARM-dts-add-gpu-node-to-exynos4.patch
@ -0,0 +1,64 @@
 From eca91d4d36d78c3176480742532b247fd3d72fe0 Mon Sep 17 00:00:00 2001
 From: Simon Shields <simon@lineageos.org>
 Date: Sat, 13 Jan 2018 14:17:26 +1100
 Subject: [PATCH 038/146] ARM: dts: add gpu node to exynos4
 v2 (Qiang Yu):
  add vender string to exynos4 mali gpu
 Based off a similar commit for the Samsung Mali driver by
 Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
 Signed-off-by: Simon Shields <simon@lineageos.org>
 Signed-off-by: Qiang Yu <yuq825@gmail.com>
 ---
 arch/arm/boot/dts/exynos4.dtsi | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
 index 6085e92ac2d7..362461657136 100644
 --- a/arch/arm/boot/dts/exynos4.dtsi
 +++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -730,6 +730,39 @@
 			status = "disabled";
 		};
 +		gpu: gpu@13000000 {
 +			compatible = "samsung,exynos4-mali", "arm,mali-400";
 +			reg = <0x13000000 0x30000>;
 +			power-domains = <&pd_g3d>;
 +
 +			/*
 +			 * Propagate VPLL output clock to SCLK_G3D and
 +			 * ensure that the DIV_G3D divider is 1.
 +			 */
 +			assigned-clocks = <&clock CLK_MOUT_G3D1>, <&clock CLK_MOUT_G3D>,
 +					  <&clock CLK_FOUT_VPLL>, <&clock CLK_SCLK_G3D>;
 +			assigned-clock-parents = <&clock CLK_SCLK_VPLL>,
 +						 <&clock CLK_MOUT_G3D1>;
 +			assigned-clock-rates = <0>, <0>, <160000000>, <160000000>;
 +
 +			clocks = <&clock CLK_SCLK_G3D>, <&clock CLK_G3D>;
 +			clock-names = "bus", "core";
 +
 +			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
 +				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
 +				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 +				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
 +				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
 +				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
 +				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
 +				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
 +				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
 +				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 +			interrupt-names = "ppmmu0", "ppmmu1", "ppmmu2", "ppmmu3",
 +					  "gpmmu", "pp0", "pp1", "pp2", "pp3", "gp";
 +			status = "disabled";
 +		};
 +
 		tmu: tmu@100c0000 {
 			interrupt-parent = <&combiner>;
 			reg = <0x100C0000 0x100>;
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0039-dt-bindings-add-switch-delay-property-for-mali-utgar.patch
+++ b/patch/kernel/sunxi-dev/0039-dt-bindings-add-switch-delay-property-for-mali-utgar.patch
@ -0,0 +1,29 @@
 From 93a9dff30ace06dceba2a84eb709433d5e08c7bc Mon Sep 17 00:00:00 2001
 From: Qiang Yu <yuq825@gmail.com>
 Date: Wed, 21 Mar 2018 14:58:02 +0800
 Subject: [PATCH 039/146] dt-bindings: add switch-delay property for
 mali-utgard
 Signed-off-by: Qiang Yu <yuq825@gmail.com>
 ---
 Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt | 4 ++++
 1 file changed, 4 insertions(+)
 diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
 index 63cd91176a68..3e2590162d4f 100644
 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
 +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
@@ -58,6 +58,10 @@ Optional properties:
     A power domain consumer specifier as defined in
     Documentation/devicetree/bindings/power/power_domain.txt
 +  - switch-delay:
 +    This value is the number of Mali clock cycles it takes to
 +    enable the power gates and turn on the power mesh.
 +
 Vendor-specific bindings
 ------------------------
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0072-drm-fourcc-add-ARM-tiled-format-modifier.patch
+++ b/patch/kernel/sunxi-dev/0072-drm-fourcc-add-ARM-tiled-format-modifier.patch
@ -0,0 +1,33 @@
 From c578aadd5ccfe5c64f628ef3aa8c7ff88600e421 Mon Sep 17 00:00:00 2001
 From: Qiang Yu <yuq825@gmail.com>
 Date: Tue, 19 Jun 2018 13:51:17 +0800
 Subject: [PATCH 072/146] drm/fourcc: add ARM tiled format modifier
 Signed-off-by: Qiang Yu <yuq825@gmail.com>
 ---
 include/uapi/drm/drm_fourcc.h | 9 +++++++++
 1 file changed, 9 insertions(+)
 diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h
 index 721ab7e54d96..097d9faca608 100644
 --- a/include/uapi/drm/drm_fourcc.h
 +++ b/include/uapi/drm/drm_fourcc.h
@@ -581,6 +581,15 @@ extern "C" {
  */
 #define AFBC_FORMAT_MOD_SC      (1ULL <<  9)
 +/*
 + * ARM tiled format
 + *
 + * This is used by ARM Mali Utgard/Midgard GPU. It divides buffer into
 + * 16x16 pixel blocks. Blocks are stored linearly in order, but pixels
 + * in the block are reordered.
 + */
 +#define DRM_FORMAT_MOD_ARM_TILED fourcc_mod_code(ARM, 1)
 +
 #if defined(__cplusplus)
 }
 #endif
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0074-a64-ccu-enable-LDOs-for-pll-mipi-and-add-min-max-rat.patch
+++ b/patch/kernel/sunxi-dev/0074-a64-ccu-enable-LDOs-for-pll-mipi-and-add-min-max-rat.patch
@ -0,0 +1,58 @@
 From 9c4d2eb582078788a3f115fef91824d9213e237d Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Tue, 24 Jul 2018 10:17:55 -0700
 Subject: [PATCH 074/146] a64: ccu: enable LDOs for pll-mipi and add min/max
 rate for it
 ---
 drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 2 ++
 drivers/clk/sunxi-ng/ccu_nkm.c        | 5 +++++
 drivers/clk/sunxi-ng/ccu_nkm.h        | 3 +++
 3 files changed, 10 insertions(+)
 diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
 index 1fe3c3fbc9bc..7c645f2c017a 100644
 --- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
 +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
@@ -163,6 +163,8 @@ static struct ccu_nkm pll_mipi_clk = {
 	.n		= _SUNXI_CCU_MULT(8, 4),
 	.k		= _SUNXI_CCU_MULT_MIN(4, 2, 2),
 	.m		= _SUNXI_CCU_DIV(0, 4),
 +	.min_rate	= 300000000,
 +	.max_rate	= 1400000000,
 	.common		= {
 		.reg		= 0x040,
 		.hw.init	= CLK_HW_INIT("pll-mipi", "pll-video0",
 diff --git a/drivers/clk/sunxi-ng/ccu_nkm.c b/drivers/clk/sunxi-ng/ccu_nkm.c
 index 841840e35e61..01e6df4c1232 100644
 --- a/drivers/clk/sunxi-ng/ccu_nkm.c
 +++ b/drivers/clk/sunxi-ng/ccu_nkm.c
@@ -122,6 +122,11 @@ static unsigned long ccu_nkm_round_rate(struct ccu_mux_internal *mux,
 	_nkm.min_m = 1;
 	_nkm.max_m = nkm->m.max ?: 1 << nkm->m.width;
 +	if (rate < nkm->min_rate)
 +		rate = nkm->min_rate;
 +	if (nkm->max_rate && (rate > nkm->max_rate))
 +		rate = nkm->max_rate;
 +
 	if (nkm->common.features & CCU_FEATURE_FIXED_POSTDIV)
 		rate *= nkm->fixed_post_div;
 diff --git a/drivers/clk/sunxi-ng/ccu_nkm.h b/drivers/clk/sunxi-ng/ccu_nkm.h
 index cc6efb70a102..6e01836ef122 100644
 --- a/drivers/clk/sunxi-ng/ccu_nkm.h
 +++ b/drivers/clk/sunxi-ng/ccu_nkm.h
@@ -36,6 +36,9 @@ struct ccu_nkm {
 	unsigned int		fixed_post_div;
 +	unsigned int		min_rate;
 +	unsigned int		max_rate;
 +
 	struct ccu_common	common;
 };
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0075-sopine-baseboard-enable-HS200-for-eMMC.patch
+++ b/patch/kernel/sunxi-dev/0075-sopine-baseboard-enable-HS200-for-eMMC.patch
@ -0,0 +1,25 @@
 From 1d3ae34846fcee5e4d4ec54476c85992d03d204e Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Mon, 10 Sep 2018 16:09:30 -0700
 Subject: [PATCH 075/146] sopine: baseboard: enable HS200 for eMMC
 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
 ---
 arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts | 1 +
 1 file changed, 1 insertion(+)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
 index dc728b3b5556..abad307b414a 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -119,6 +119,7 @@
 	bus-width = <8>;
 	non-removable;
 	cap-mmc-hw-reset;
 +	mmc-hs200-1_8v;
 	status = "okay";
 };
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0079-drm-bridge-Add-audio-workaround-for-dw_hdmi-v1.32a.patch.disabled
+++ b/patch/kernel/sunxi-dev/0079-drm-bridge-Add-audio-workaround-for-dw_hdmi-v1.32a.patch.disabled
@ -0,0 +1,58 @@
 From 87c27a1c822a43d8f6d7bc2bb889be2d3d80a100 Mon Sep 17 00:00:00 2001
 From: Jernej Skrabec <jernej.skrabec@siol.net>
 Date: Sun, 3 Sep 2017 11:32:34 +0200
 Subject: [PATCH 079/146] drm: bridge: Add audio workaround for dw_hdmi v1.32a
 Allwinner SoCs with dw hdmi v1.32a seems to have an issue with manual
 setting CTS value. BSP driver sets it to auto mode and that works
 here too.
 Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
 ---
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 30 +++++++++++++++--------
 1 file changed, 20 insertions(+), 10 deletions(-)
 diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
 index 5971976284bf..4b08840749bd 100644
 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
 +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -424,16 +424,26 @@ static struct i2c_adapter *dw_hdmi_i2c_adapter(struct dw_hdmi *hdmi)
 static void hdmi_set_cts_n(struct dw_hdmi *hdmi, unsigned int cts,
 			   unsigned int n)
 {
 -	/* Must be set/cleared first */
 -	hdmi_modb(hdmi, 0, HDMI_AUD_CTS3_CTS_MANUAL, HDMI_AUD_CTS3);
 -
 -	/* nshift factor = 0 */
 -	hdmi_modb(hdmi, 0, HDMI_AUD_CTS3_N_SHIFT_MASK, HDMI_AUD_CTS3);
 -
 -	hdmi_writeb(hdmi, ((cts >> 16) & HDMI_AUD_CTS3_AUDCTS19_16_MASK) |
 -		    HDMI_AUD_CTS3_CTS_MANUAL, HDMI_AUD_CTS3);
 -	hdmi_writeb(hdmi, (cts >> 8) & 0xff, HDMI_AUD_CTS2);
 -	hdmi_writeb(hdmi, cts & 0xff, HDMI_AUD_CTS1);
 +	/*
 +	 * Manual CTS setting doesn't work correctly on Allwinner SoCs with
 +	 * dw hdmi v1.32a.
 +	 */
 +	if (hdmi->version != 0x132a) {
 +		/* Must be set/cleared first */
 +		hdmi_modb(hdmi, 0, HDMI_AUD_CTS3_CTS_MANUAL, HDMI_AUD_CTS3);
 +
 +		/* nshift factor = 0 */
 +		hdmi_modb(hdmi, 0, HDMI_AUD_CTS3_N_SHIFT_MASK, HDMI_AUD_CTS3);
 +
 +		hdmi_writeb(hdmi,
 +			    ((cts >> 16) & HDMI_AUD_CTS3_AUDCTS19_16_MASK) |
 +			    HDMI_AUD_CTS3_CTS_MANUAL, HDMI_AUD_CTS3);
 +		hdmi_writeb(hdmi, (cts >> 8) & 0xff, HDMI_AUD_CTS2);
 +		hdmi_writeb(hdmi, cts & 0xff, HDMI_AUD_CTS1);
 +	} else {
 +		/* set automatic CTS calculation */
 +		hdmi_writeb(hdmi, 0x00, HDMI_AUD_CTS3);
 +	}
 	hdmi_writeb(hdmi, (n >> 16) & 0x0f, HDMI_AUD_N3);
 	hdmi_writeb(hdmi, (n >> 8) & 0xff, HDMI_AUD_N2);
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0080-rtl8723bs-disable-error-message-about-failure-to-all.patch
+++ b/patch/kernel/sunxi-dev/0080-rtl8723bs-disable-error-message-about-failure-to-all.patch
@ -0,0 +1,26 @@
 From 02d04263581ac956a4822b02ee7ccd15aa5600af Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Mon, 10 Sep 2018 20:32:51 -0700
 Subject: [PATCH 080/146] rtl8723bs: disable error message about failure to
 alloc recvbuf
 ---
 drivers/staging/rtl8723bs/hal/sdio_ops.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
 diff --git a/drivers/staging/rtl8723bs/hal/sdio_ops.c b/drivers/staging/rtl8723bs/hal/sdio_ops.c
 index d6b93e1f78d8..ecc4d1db9bbe 100644
 --- a/drivers/staging/rtl8723bs/hal/sdio_ops.c
 +++ b/drivers/staging/rtl8723bs/hal/sdio_ops.c
@@ -947,7 +947,7 @@ static struct recv_buf *sd_recv_rxfifo(struct adapter *adapter, u32 size)
 	recv_priv = &adapter->recvpriv;
 	recvbuf = rtw_dequeue_recvbuf(&recv_priv->free_recv_buf_queue);
 	if (!recvbuf) {
 -		DBG_871X_LEVEL(_drv_err_, "%s: alloc recvbuf FAIL!\n", __func__);
 +		//DBG_871X_LEVEL(_drv_err_, "%s: alloc recvbuf FAIL!\n", __func__);
 		return NULL;
 	}
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0101-arm64-dts-allwinner-a64-Enable-HDMI-output-on-A64-bo.patch
+++ b/patch/kernel/sunxi-dev/0101-arm64-dts-allwinner-a64-Enable-HDMI-output-on-A64-bo.patch
@ -0,0 +1,78 @@
 From e7623ac862573d231eea2ec77d393adbf2db3392 Mon Sep 17 00:00:00 2001
 From: Jagan Teki <jagan@amarulasolutions.com>
 Date: Tue, 4 Sep 2018 12:40:53 +0800
 Subject: [PATCH 101/146] arm64: dts: allwinner: a64: Enable HDMI output on A64
 boards w/ HDMI
 Enable all necessary device tree nodes and add connector node to device
 trees for all supported A64 boards with HDMI.
 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
 [Icenowy: squash all board patches altogether and change supply name]
 Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
 Tested-by: Jagan Teki <jagan@amarulasolutions.com> # BPI-M64, OPI-Win,
 Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
 ---
 .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 26 ++++++++++++++++++
 .../dts/allwinner/sun50i-a64-nanopi-a64.dts   | 27 +++++++++++++++++++
 .../dts/allwinner/sun50i-a64-olinuxino.dts    | 26 ++++++++++++++++++
 .../dts/allwinner/sun50i-a64-orangepi-win.dts | 27 +++++++++++++++++++
 .../boot/dts/allwinner/sun50i-a64-pine64.dts  | 27 +++++++++++++++++++
 .../dts/allwinner/sun50i-a64-pinebook.dts     | 26 ++++++++++++++++++
 .../allwinner/sun50i-a64-sopine-baseboard.dts | 26 ++++++++++++++++++
 7 files changed, 185 insertions(+)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
 index b3698a8bb1d3..52cbb3052588 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -53,6 +53,17 @@
 		};
 	};
 +	hdmi-connector {
 +		compatible = "hdmi-connector";
 +		type = "a";
 +
 +		port {
 +			hdmi_con_in: endpoint {
 +				remote-endpoint = <&hdmi_out_con>;
 +			};
 +		};
 +	};
 +
 	reg_vcc3v3: vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3";
@@ -70,6 +81,10 @@
        cpu-supply = <&reg_dcdc2>;
 };
 +&de {
 +	status = "okay";
 +};
 +
 &ehci0 {
 	phys = <&usbphy 0>;
 	phy-names = "usb";
@@ -80,6 +95,17 @@
 	status = "okay";
 };
 +&hdmi {
 +	hvcc-supply = <&reg_dldo1>;
 +	status = "okay";
 +};
 +
 +&hdmi_out {
 +	hdmi_out_con: endpoint {
 +		remote-endpoint = <&hdmi_con_in>;
 +	};
 +};
 +
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0103-dt-bindings-power-supply-axp20x-add-AXP803-power-bin.patch
+++ b/patch/kernel/sunxi-dev/0103-dt-bindings-power-supply-axp20x-add-AXP803-power-bin.patch
@ -0,0 +1,43 @@
 From 5b0f15a9da1cb6110bc2eded53bf18626626179c Mon Sep 17 00:00:00 2001
 From: Oskari Lemmela <oskari@lemmela.net>
 Date: Tue, 23 Oct 2018 21:53:21 +0300
 Subject: [PATCH 103/146] dt-bindings: power: supply: axp20x: add AXP803 power
 bindings
 The AXP803 power supplies are compatible with AXP813, but
 add specific compatibles for them.
 Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
 Reviewed-by: Rob Herring <robh@kernel.org>
 ---
 .../devicetree/bindings/power/supply/axp20x_ac_power.txt         | 1 +
 .../devicetree/bindings/power/supply/axp20x_battery.txt          | 1 +
 2 files changed, 2 insertions(+)
 diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt b/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt
 index 7a1fb532abe5..acdeb4b8f4cc 100644
 --- a/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt
 +++ b/Documentation/devicetree/bindings/power/supply/axp20x_ac_power.txt
@@ -4,6 +4,7 @@ Required Properties:
  - compatible: One of:
 			"x-powers,axp202-ac-power-supply"
 			"x-powers,axp221-ac-power-supply"
 +			"x-powers,axp803-ac-power-supply"
 			"x-powers,axp813-ac-power-supply"
 This node is a subnode of the axp20x PMIC.
 diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt b/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt
 index 41916f69902c..780ebd7e3b84 100644
 --- a/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt
 +++ b/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt
@@ -4,6 +4,7 @@ Required Properties:
  - compatible, one of:
 			"x-powers,axp209-battery-power-supply"
 			"x-powers,axp221-battery-power-supply"
 +			"x-powers,axp803-battery-power-supply"
 			"x-powers,axp813-battery-power-supply"
 This node is a subnode of its respective PMIC DT node.
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0104-dt-bindings-gpio-gpio-axp209-add-AXP803-GPIO-binding.patch
+++ b/patch/kernel/sunxi-dev/0104-dt-bindings-gpio-gpio-axp209-add-AXP803-GPIO-binding.patch
@ -0,0 +1,38 @@
 From 80694d54812c5fc49dd738e17a9cf5a91f343cae Mon Sep 17 00:00:00 2001
 From: Oskari Lemmela <oskari@lemmela.net>
 Date: Tue, 23 Oct 2018 21:53:22 +0300
 Subject: [PATCH 104/146] dt-bindings: gpio: gpio-axp209: add AXP803 GPIO
 bindings
 The AXP803 GPIO is compatible with AXP813 GPIO, but add
 specific compatible for it.
 Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
 Reviewed-by: Rob Herring <robh@kernel.org>
 ---
 Documentation/devicetree/bindings/gpio/gpio-axp209.txt | 2 ++
 1 file changed, 2 insertions(+)
 diff --git a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt
 index fc42b2caa06d..5337a21d7bcf 100644
 --- a/Documentation/devicetree/bindings/gpio/gpio-axp209.txt
 +++ b/Documentation/devicetree/bindings/gpio/gpio-axp209.txt
@@ -11,6 +11,7 @@ This driver employs the per-pin muxing pattern.
 Required properties:
 - compatible: Should be one of:
 	- "x-powers,axp209-gpio"
 +	- "x-powers,axp803-gpio"
 	- "x-powers,axp813-gpio"
 - #gpio-cells: Should be two. The first cell is the pin number and the
   second is the GPIO flags.
@@ -67,6 +68,7 @@ GPIO0	|	gpio_in, gpio_out, ldo, adc
 GPIO1	|	gpio_in, gpio_out, ldo, adc
 GPIO2	|	gpio_in, gpio_out
 +axp803
 axp813
 ------
 GPIO	|	Functions
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0105-dt-bindings-iio-adc-add-AXP803-ADC-bindings.patch
+++ b/patch/kernel/sunxi-dev/0105-dt-bindings-iio-adc-add-AXP803-ADC-bindings.patch
@ -0,0 +1,37 @@
 From fd2f21f1e63f52476bbbb0ce17fb6288a623f2ae Mon Sep 17 00:00:00 2001
 From: Oskari Lemmela <oskari@lemmela.net>
 Date: Tue, 23 Oct 2018 21:53:23 +0300
 Subject: [PATCH 105/146] dt-bindings: iio: adc: add AXP803 ADC bindings
 The AXP803 ADC is compatible with AXP813 ADC, but add
 specific compatible for it.
 Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
 Reviewed-by: Rob Herring <robh@kernel.org>
 ---
 Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt | 2 ++
 1 file changed, 2 insertions(+)
 diff --git a/Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt b/Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt
 index 7a6313913923..1dbd5e480acd 100644
 --- a/Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt
 +++ b/Documentation/devicetree/bindings/iio/adc/axp20x_adc.txt
@@ -4,6 +4,7 @@ Required properties:
   - compatible: should be one of:
     - "x-powers,axp209-adc",
     - "x-powers,axp221-adc",
 +    - "x-powers,axp803-adc",
     - "x-powers,axp813-adc",
   - #io-channel-cells: should be 1,
@@ -39,6 +40,7 @@ AXP22x
  2 | batt_chrg_i
  3 | batt_dischrg_i
 +AXP803
 AXP813
 ------
  0 | pmic_temp
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0108-arm64-dts-allwinner-a64-sopine-baseboard-enable-powe.patch
+++ b/patch/kernel/sunxi-dev/0108-arm64-dts-allwinner-a64-sopine-baseboard-enable-powe.patch
@ -0,0 +1,39 @@
 From f16f4cbdb0deb70c03731fbccb4f52eb4d1d096a Mon Sep 17 00:00:00 2001
 From: Oskari Lemmela <oskari@lemmela.net>
 Date: Tue, 23 Oct 2018 21:53:26 +0300
 Subject: [PATCH 108/146] arm64: dts: allwinner: a64: sopine-baseboard: enable
 power supplies
 AXP803 ACIN pins are routed from SOM to the DC jack on the baseboard.
 AXP803 charger pins BATSENSE, LOADSENSE, N_BATDRV, LX_CHG, VIN_CHG
 and IPSOUT are connected via PMOS driver to SOM VBAT pins. VBAT and
 AXP803 TS pins are routed to the baseboard 3-pin battery connector.
 Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
 Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com>
 ---
 .../boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts    | 8 ++++++++
 1 file changed, 8 insertions(+)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
 index 8e9191f489a6..df7aa8c5f751 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -80,6 +80,14 @@
 	};
 };
 +&ac_power_supply {
 +	status = "okay";
 +};
 +
 +&battery_power_supply {
 +	status = "okay";
 +};
 +
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0111-mfd-axp20x-Add-AC-power-supply-cell-for-AXP813.patch
+++ b/patch/kernel/sunxi-dev/0111-mfd-axp20x-Add-AC-power-supply-cell-for-AXP813.patch
@ -0,0 +1,41 @@
 From ea6865e1bfc1a1ac72fe95be42abb88b47413363 Mon Sep 17 00:00:00 2001
 From: Oskari Lemmela <oskari@lemmela.net>
 Date: Tue, 23 Oct 2018 21:53:29 +0300
 Subject: [PATCH 111/146] mfd: axp20x: Add AC power supply cell for AXP813
 As axp20x-ac-power-supply now supports AXP813, add a cell for it.
 Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
 Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com>
 Reviewed-by: Chen-Yu Tsai <wens@csie.org>
 Tested-by: Vasily Khoruzhick <anarsoul@gmail.com>
 Changed-by: Igor@armbian
 ---
 drivers/mfd/axp20x.c | 5 +++++
 1 file changed, 5 insertions(+)
 diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
 index 0be511dd93d0..dfc3cff1d08b 100644
 --- a/drivers/mfd/axp20x.c
 +++ b/drivers/mfd/axp20x.c
@@ -805,8 +805,13 @@ static const struct mfd_cell axp813_cells[] = {
 		.name			= "axp813-adc",
 		.of_compatible		= "x-powers,axp813-adc",
 	}, {
 -		.name		= "axp20x-battery-power-supply",
 -		.of_compatible	= "x-powers,axp813-battery-power-supply",
 +		.name			= "axp20x-battery-power-supply",
 +		.of_compatible		= "x-powers,axp813-battery-power-supply",
 +	}, {
 +		.name			= "axp20x-ac-power-supply",
 +		.of_compatible		= "x-powers,axp813-ac-power-supply",
 +		.num_resources		= ARRAY_SIZE(axp20x_ac_power_supply_resources),
 +		.resources		= axp20x_ac_power_supply_resources,
 	}, {
 		.name			= "axp20x-usb-power-supply",
 		.of_compatible		= "x-powers,axp813-usb-power-supply",
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0120-arm64-dts-allwinner-a64-add-nodes-necessary-for-anal.patch-DISABLED
+++ b/patch/kernel/sunxi-dev/0120-arm64-dts-allwinner-a64-add-nodes-necessary-for-anal.patch-DISABLED
@ -0,0 +1,99 @@
 From 8cbc3090d64e850f1dc5a93e929deaed10d841f8 Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Sun, 3 Dec 2017 11:35:48 -0800
 Subject: [PATCH 120/146] arm64: dts: allwinner: a64: add nodes necessary for
 analog sound support
 Add nodes for i2s, digital and analog parts of audiocodec on A64
 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
 ---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 58 +++++++++++++++++++
 1 file changed, 58 insertions(+)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
 index 132da408aa52..cb7d4a96e789 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -200,6 +200,34 @@
 		method = "smc";
 	};
 +	sound: sound {
 +		compatible = "simple-audio-card";
 +		simple-audio-card,name = "sun50i-a64-audio";
 +		simple-audio-card,format = "i2s";
 +		simple-audio-card,frame-master = <&cpudai>;
 +		simple-audio-card,bitclock-master = <&cpudai>;
 +		simple-audio-card,mclk-fs = <512>;
 +		simple-audio-card,aux-devs = <&codec_analog>;
 +		simple-audio-card,routing =
 +				"Left DAC", "AIF1 Slot 0 Left",
 +				"Right DAC", "AIF1 Slot 0 Right",
 +				"AIF1 Slot 0 Left ADC", "Left ADC",
 +				"AIF1 Slot 0 Right ADC", "Right ADC",
 +				"Left ADC", "ADC",
 +				"Right ADC", "ADC",
 +				"MIC1", "Mic",
 +				"MIC2", "Headset Mic";
 +		status = "disabled";
 +
 +		cpudai: simple-audio-card,cpu {
 +			sound-dai = <&dai>;
 +		};
 +
 +		link_codec: simple-audio-card,codec {
 +			sound-dai = <&codec>;
 +		};
 +	};
 +
 	sound_spdif {
 		compatible = "simple-audio-card";
 		simple-audio-card,name = "On-board SPDIF";
@@ -767,6 +795,30 @@
 			status = "disabled";
 		};
 +		dai: dai@1c22c00 {
 +			#sound-dai-cells = <0>;
 +			compatible = "allwinner,sun50i-a64-codec-i2s";
 +			reg = <0x01c22c00 0x200>;
 +			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 +			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
 +			clock-names = "apb", "mod";
 +			resets = <&ccu RST_BUS_CODEC>;
 +			reset-names = "rst";
 +			dmas = <&dma 15>, <&dma 15>;
 +			dma-names = "rx", "tx";
 +			status = "disabled";
 +		};
 +
 +		codec: codec@1c22e00 {
 +			#sound-dai-cells = <0>;
 +			compatible = "allwinner,sun8i-a33-codec";
 +			reg = <0x01c22e00 0x600>;
 +			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 +			clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
 +			clock-names = "bus", "mod";
 +			status = "disabled";
 +		};
 +
 		ths: thermal-sensor@1c25000 {
 			compatible = "allwinner,sun50i-a64-ths";
 			reg = <0x01c25000 0x100>;
@@ -1071,6 +1123,12 @@
 			#reset-cells = <1>;
 		};
 +		codec_analog: codec-analog@1f015c0 {
 +			compatible = "allwinner,sun50i-a64-codec-analog";
 +			reg = <0x01f015c0 0x4>;
 +			status = "disabled";
 +		};
 +
 		r_i2c: i2c@1f02400 {
 			compatible = "allwinner,sun50i-a64-i2c",
 				     "allwinner,sun6i-a31-i2c";
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0123-drm-sun4i-tcon-enable-dithering-on-tcon0-is-there-s-.patch.disabled
+++ b/patch/kernel/sunxi-dev/0123-drm-sun4i-tcon-enable-dithering-on-tcon0-is-there-s-.patch.disabled
@ -0,0 +1,58 @@
 From 4690963a2d219abac912ebe2f0b22529c028db06 Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Sun, 28 Oct 2018 15:32:38 -0700
 Subject: [PATCH 123/146] drm/sun4i: tcon: enable dithering on tcon0 is there's
 bridge connected
 RGB on A64 is 6bpc, so if bridge is connected we need to enable dithering
 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
 ---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
 diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
 index 1b28fd9c2908..891ba4dbbf10 100644
 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
 +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -283,10 +283,6 @@ static void sun4i_tcon0_mode_set_dithering(struct sun4i_tcon *tcon,
 	u32 bus_format = 0;
 	u32 val = 0;
 -	/* XXX Would this ever happen? */
 -	if (!connector)
 -		return;
 -
 	/*
 	 * FIXME: Undocumented bits
 	 *
@@ -304,11 +300,15 @@ static void sun4i_tcon0_mode_set_dithering(struct sun4i_tcon *tcon,
 	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL2_REG, 0x57575555);
 	regmap_write(tcon->regs, SUN4I_TCON0_FRM_TBL3_REG, 0x7f7f7777);
 +	/* Do dithering if there's bridge connected */
 +	if (!connector)
 +		val |= SUN4I_TCON0_FRM_CTL_EN;
 +
 	/* Do dithering if panel only supports 6 bits per color */
 -	if (connector->display_info.bpc == 6)
 +	if (connector && connector->display_info.bpc == 6)
 		val |= SUN4I_TCON0_FRM_CTL_EN;
 -	if (connector->display_info.num_bus_formats == 1)
 +	if (connector && connector->display_info.num_bus_formats == 1)
 		bus_format = connector->display_info.bus_formats[0];
 	/* Check the connection format */
@@ -492,6 +492,8 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
 	/* Set dithering if needed */
 	if (tcon->panel)
 		sun4i_tcon0_mode_set_dithering(tcon, tcon->panel->connector);
 +	else
 +		sun4i_tcon0_mode_set_dithering(tcon, NULL);
 	/* Adjust clock delay */
 	clk_delay = sun4i_tcon_get_clk_delay(mode, 0);
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0126-drm-bridge-move-ANA78xx-driver-to-analogix-subdirect.patch
+++ b/patch/kernel/sunxi-dev/0126-drm-bridge-move-ANA78xx-driver-to-analogix-subdirect.patch
@ -0,0 +1,97 @@
 From c66953710d4c7205c380bf9c5a7e296bef3d4948 Mon Sep 17 00:00:00 2001
 From: Icenowy Zheng <icenowy@aosc.io>
 Date: Thu, 18 Oct 2018 15:33:19 +0800
 Subject: [PATCH 126/146] drm/bridge: move ANA78xx driver to analogix
 subdirectory
 As ANA78xx chips are designed and produced by Analogix Semiconductor,
 Inc, move their driver codes into analogix subdirectory.
 Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
 Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 ---
 drivers/gpu/drm/bridge/Kconfig                         | 10 ----------
 drivers/gpu/drm/bridge/Makefile                        |  4 ++--
 drivers/gpu/drm/bridge/analogix/Kconfig                | 10 ++++++++++
 drivers/gpu/drm/bridge/analogix/Makefile               |  1 +
 .../gpu/drm/bridge/{ => analogix}/analogix-anx78xx.c   |  0
 .../gpu/drm/bridge/{ => analogix}/analogix-anx78xx.h   |  0
 6 files changed, 13 insertions(+), 12 deletions(-)
 rename drivers/gpu/drm/bridge/{ => analogix}/analogix-anx78xx.c (100%)
 rename drivers/gpu/drm/bridge/{ => analogix}/analogix-anx78xx.h (100%)
 diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
 index bf6cad6c9178..43f3c8ff54a4 100644
 --- a/drivers/gpu/drm/bridge/Kconfig
 +++ b/drivers/gpu/drm/bridge/Kconfig
@@ -15,16 +15,6 @@ config DRM_PANEL_BRIDGE
 menu "Display Interface Bridges"
 	depends on DRM && DRM_BRIDGE
 -config DRM_ANALOGIX_ANX78XX
 -	tristate "Analogix ANX78XX bridge"
 -	select DRM_KMS_HELPER
 -	select REGMAP_I2C
 -	---help---
 -	  ANX78XX is an ultra-low Full-HD SlimPort transmitter
 -	  designed for portable devices. The ANX78XX transforms
 -	  the HDMI output of an application processor to MyDP
 -	  or DisplayPort.
 -
 config DRM_CDNS_DSI
 	tristate "Cadence DPI/DSI bridge"
 	select DRM_KMS_HELPER
 diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
 index 4934fcf..729a806 100644
 --- a/drivers/gpu/drm/bridge/Makefile
 +++ b/drivers/gpu/drm/bridge/Makefile
@@ -1,5 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
 -obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
 obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o
 obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o
 obj-$(CONFIG_DRM_LVDS_ENCODER) += lvds-encoder.o
@@ -16,4 +15,6 @@ obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
 obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
 obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o
 obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o
 +
 +obj-y += analogix/
 obj-y += synopsys/
 diff --git a/drivers/gpu/drm/bridge/analogix/Kconfig b/drivers/gpu/drm/bridge/analogix/Kconfig
 index 80f286fa3a69..27b37aa2ea77 100644
 --- a/drivers/gpu/drm/bridge/analogix/Kconfig
 +++ b/drivers/gpu/drm/bridge/analogix/Kconfig
@@ -1,3 +1,13 @@
 config DRM_ANALOGIX_DP
 	tristate
 	depends on DRM
 +
 +config DRM_ANALOGIX_ANX78XX
 +	tristate "Analogix ANX78XX bridge"
 +	select DRM_KMS_HELPER
 +	select REGMAP_I2C
 +	---help---
 +	  ANX78XX is an ultra-low Full-HD SlimPort transmitter
 +	  designed for portable devices. The ANX78XX transforms
 +	  the HDMI output of an application processor to MyDP
 +	  or DisplayPort.
 diff --git a/drivers/gpu/drm/bridge/analogix/Makefile b/drivers/gpu/drm/bridge/analogix/Makefile
 index cd4010ba6890..eb41be845055 100644
 --- a/drivers/gpu/drm/bridge/analogix/Makefile
 +++ b/drivers/gpu/drm/bridge/analogix/Makefile
@@ -1,2 +1,3 @@
 analogix_dp-objs := analogix_dp_core.o analogix_dp_reg.o
 obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix_dp.o
 +obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
 diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c
 similarity index 100%
 rename from drivers/gpu/drm/bridge/analogix-anx78xx.c
 rename to drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c
 diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.h b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
 similarity index 100%
 rename from drivers/gpu/drm/bridge/analogix-anx78xx.h
 rename to drivers/gpu/drm/bridge/analogix/analogix-anx78xx.h
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0127-drm-bridge-split-some-definitions-of-ANX78xx-to-dedi.patch
+++ b/patch/kernel/sunxi-dev/0127-drm-bridge-split-some-definitions-of-ANX78xx-to-dedi.patch
--- a/patch/kernel/sunxi-dev/0128-drm-bridge-extract-some-Analogix-I2C-DP-common-code.patch
+++ b/patch/kernel/sunxi-dev/0128-drm-bridge-extract-some-Analogix-I2C-DP-common-code.patch
@ -0,0 +1,403 @@
 From d1f75332d44f26e734985493c134a727c79cb1f1 Mon Sep 17 00:00:00 2001
 From: Icenowy Zheng <icenowy@aosc.io>
 Date: Thu, 18 Oct 2018 15:33:21 +0800
 Subject: [PATCH 128/146] drm/bridge: extract some Analogix I2C DP common code
 Some code can be shared within different DP bridges by Analogix.
 Extract them to a new module.
 Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
 ---
 drivers/gpu/drm/bridge/analogix/Kconfig       |   4 +
 drivers/gpu/drm/bridge/analogix/Makefile      |   2 +
 .../drm/bridge/analogix/analogix-anx78xx.c    | 146 +--------------
 .../drm/bridge/analogix/analogix-i2c-dptx.c   | 169 ++++++++++++++++++
 .../drm/bridge/analogix/analogix-i2c-dptx.h   |   2 +
 5 files changed, 178 insertions(+), 145 deletions(-)
 create mode 100644 drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
 diff --git a/drivers/gpu/drm/bridge/analogix/Kconfig b/drivers/gpu/drm/bridge/analogix/Kconfig
 index 27b37aa2ea77..eb893b465dd8 100644
 --- a/drivers/gpu/drm/bridge/analogix/Kconfig
 +++ b/drivers/gpu/drm/bridge/analogix/Kconfig
@@ -2,8 +2,12 @@ config DRM_ANALOGIX_DP
 	tristate
 	depends on DRM
 +config DRM_ANALOGIX_DP_I2C
 +	tristate
 +
 config DRM_ANALOGIX_ANX78XX
 	tristate "Analogix ANX78XX bridge"
 +	select DRM_ANALOGIX_DP_I2C
 	select DRM_KMS_HELPER
 	select REGMAP_I2C
 	---help---
 diff --git a/drivers/gpu/drm/bridge/analogix/Makefile b/drivers/gpu/drm/bridge/analogix/Makefile
 index eb41be845055..c37e2ded8ce3 100644
 --- a/drivers/gpu/drm/bridge/analogix/Makefile
 +++ b/drivers/gpu/drm/bridge/analogix/Makefile
@@ -1,3 +1,5 @@
 analogix_dp-objs := analogix_dp_core.o analogix_dp_reg.o
 +analogix_dp_i2c-objs := analogix-i2c-dptx.o
 obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix_dp.o
 +obj-$(CONFIG_DRM_ANALOGIX_DP_I2C) += analogix_dp_i2c.o
 obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
 diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c
 index f8433c93f463..bf8291d0ddd0 100644
 --- a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c
 +++ b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c
@@ -45,8 +45,6 @@
 #define I2C_IDX_RX_P1		4
 #define XTAL_CLK		270 /* 27M */
 -#define AUX_CH_BUFFER_SIZE	16
 -#define AUX_WAIT_TIMEOUT_MS	15
 static const u8 anx78xx_i2c_addresses[] = {
 	[I2C_IDX_TX_P0] = TX_P0,
@@ -109,153 +107,11 @@ static int anx78xx_clear_bits(struct regmap *map, u8 reg, u8 mask)
 	return regmap_update_bits(map, reg, mask, 0);
 }
 -static bool anx78xx_aux_op_finished(struct anx78xx *anx78xx)
 -{
 -	unsigned int value;
 -	int err;
 -
 -	err = regmap_read(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL2_REG,
 -			  &value);
 -	if (err < 0)
 -		return false;
 -
 -	return (value & SP_AUX_EN) == 0;
 -}
 -
 -static int anx78xx_aux_wait(struct anx78xx *anx78xx)
 -{
 -	unsigned long timeout;
 -	unsigned int status;
 -	int err;
 -
 -	timeout = jiffies + msecs_to_jiffies(AUX_WAIT_TIMEOUT_MS) + 1;
 -
 -	while (!anx78xx_aux_op_finished(anx78xx)) {
 -		if (time_after(jiffies, timeout)) {
 -			if (!anx78xx_aux_op_finished(anx78xx)) {
 -				DRM_ERROR("Timed out waiting AUX to finish\n");
 -				return -ETIMEDOUT;
 -			}
 -
 -			break;
 -		}
 -
 -		usleep_range(1000, 2000);
 -	}
 -
 -	/* Read the AUX channel access status */
 -	err = regmap_read(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_CH_STATUS_REG,
 -			  &status);
 -	if (err < 0) {
 -		DRM_ERROR("Failed to read from AUX channel: %d\n", err);
 -		return err;
 -	}
 -
 -	if (status & SP_AUX_STATUS) {
 -		DRM_ERROR("Failed to wait for AUX channel (status: %02x)\n",
 -			  status);
 -		return -ETIMEDOUT;
 -	}
 -
 -	return 0;
 -}
 -
 -static int anx78xx_aux_address(struct anx78xx *anx78xx, unsigned int addr)
 -{
 -	int err;
 -
 -	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_ADDR_7_0_REG,
 -			   addr & 0xff);
 -	if (err)
 -		return err;
 -
 -	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_ADDR_15_8_REG,
 -			   (addr & 0xff00) >> 8);
 -	if (err)
 -		return err;
 -
 -	/*
 -	 * DP AUX CH Address Register #2, only update bits[3:0]
 -	 * [7:4] RESERVED
 -	 * [3:0] AUX_ADDR[19:16], Register control AUX CH address.
 -	 */
 -	err = regmap_update_bits(anx78xx->map[I2C_IDX_TX_P0],
 -				 SP_AUX_ADDR_19_16_REG,
 -				 SP_AUX_ADDR_19_16_MASK,
 -				 (addr & 0xf0000) >> 16);
 -
 -	if (err)
 -		return err;
 -
 -	return 0;
 -}
 -
 static ssize_t anx78xx_aux_transfer(struct drm_dp_aux *aux,
 				    struct drm_dp_aux_msg *msg)
 {
 	struct anx78xx *anx78xx = container_of(aux, struct anx78xx, aux);
 -	u8 ctrl1 = msg->request;
 -	u8 ctrl2 = SP_AUX_EN;
 -	u8 *buffer = msg->buffer;
 -	int err;
 -
 -	/* The DP AUX transmit and receive buffer has 16 bytes. */
 -	if (WARN_ON(msg->size > AUX_CH_BUFFER_SIZE))
 -		return -E2BIG;
 -
 -	/* Zero-sized messages specify address-only transactions. */
 -	if (msg->size < 1)
 -		ctrl2 |= SP_ADDR_ONLY;
 -	else	/* For non-zero-sized set the length field. */
 -		ctrl1 |= (msg->size - 1) << SP_AUX_LENGTH_SHIFT;
 -
 -	if ((msg->request & DP_AUX_I2C_READ) == 0) {
 -		/* When WRITE | MOT write values to data buffer */
 -		err = regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P0],
 -					SP_DP_BUF_DATA0_REG, buffer,
 -					msg->size);
 -		if (err)
 -			return err;
 -	}
 -
 -	/* Write address and request */
 -	err = anx78xx_aux_address(anx78xx, msg->address);
 -	if (err)
 -		return err;
 -
 -	err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL1_REG,
 -			   ctrl1);
 -	if (err)
 -		return err;
 -
 -	/* Start transaction */
 -	err = regmap_update_bits(anx78xx->map[I2C_IDX_TX_P0],
 -				 SP_DP_AUX_CH_CTRL2_REG, SP_ADDR_ONLY |
 -				 SP_AUX_EN, ctrl2);
 -	if (err)
 -		return err;
 -
 -	err = anx78xx_aux_wait(anx78xx);
 -	if (err)
 -		return err;
 -
 -	msg->reply = DP_AUX_I2C_REPLY_ACK;
 -
 -	if ((msg->size > 0) && (msg->request & DP_AUX_I2C_READ)) {
 -		/* Read values from data buffer */
 -		err = regmap_bulk_read(anx78xx->map[I2C_IDX_TX_P0],
 -				       SP_DP_BUF_DATA0_REG, buffer,
 -				       msg->size);
 -		if (err)
 -			return err;
 -	}
 -
 -	err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
 -				 SP_DP_AUX_CH_CTRL2_REG, SP_ADDR_ONLY);
 -	if (err)
 -		return err;
 -
 -	return msg->size;
 +	return anx_aux_transfer(anx78xx->map[I2C_IDX_TX_P0], msg);
 }
 static int anx78xx_set_hpd(struct anx78xx *anx78xx)
 diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
 new file mode 100644
 index 000000000000..9cb30962032e
 --- /dev/null
 +++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
@@ -0,0 +1,169 @@
 +// SPDX-License-Identifier: GPL-2.0
 +/*
 + * Copyright(c) 2017 Icenowy Zheng <icenowy@aosc.io>
 + *
 + * Based on analogix-anx78xx.c, which is:
 + *   Copyright(c) 2016, Analogix Semiconductor. All rights reserved.
 + */
 +
 +#include <linux/module.h>
 +#include <linux/regmap.h>
 +
 +#include <drm/drm.h>
 +#include <drm/drmP.h>
 +#include <drm/drm_dp_helper.h>
 +
 +#include "analogix-i2c-dptx.h"
 +
 +#define AUX_WAIT_TIMEOUT_MS	15
 +#define AUX_CH_BUFFER_SIZE	16
 +
 +static int anx_clear_bits(struct regmap *map, u8 reg, u8 mask)
 +{
 +	return regmap_update_bits(map, reg, mask, 0);
 +}
 +
 +static bool anx_aux_op_finished(struct regmap *map_dptx)
 +{
 +	unsigned int value;
 +	int err;
 +
 +	err = regmap_read(map_dptx, SP_DP_AUX_CH_CTRL2_REG, &value);
 +	if (err < 0)
 +		return false;
 +
 +	return (value & SP_AUX_EN) == 0;
 +}
 +
 +static int anx_aux_wait(struct regmap *map_dptx)
 +{
 +	unsigned long timeout;
 +	unsigned int status;
 +	int err;
 +
 +	timeout = jiffies + msecs_to_jiffies(AUX_WAIT_TIMEOUT_MS) + 1;
 +
 +	while (!anx_aux_op_finished(map_dptx)) {
 +		if (time_after(jiffies, timeout)) {
 +			if (!anx_aux_op_finished(map_dptx)) {
 +				DRM_ERROR("Timed out waiting AUX to finish\n");
 +				return -ETIMEDOUT;
 +			}
 +
 +			break;
 +		}
 +
 +		usleep_range(1000, 2000);
 +	}
 +
 +	/* Read the AUX channel access status */
 +	err = regmap_read(map_dptx, SP_AUX_CH_STATUS_REG, &status);
 +	if (err < 0) {
 +		DRM_ERROR("Failed to read from AUX channel: %d\n", err);
 +		return err;
 +	}
 +
 +	if (status & SP_AUX_STATUS) {
 +		DRM_ERROR("Failed to wait for AUX channel (status: %02x)\n",
 +			  status);
 +		return -ETIMEDOUT;
 +	}
 +
 +	return 0;
 +}
 +
 +static int anx_aux_address(struct regmap *map_dptx, unsigned int addr)
 +{
 +	int err;
 +
 +	err = regmap_write(map_dptx, SP_AUX_ADDR_7_0_REG, addr & 0xff);
 +	if (err)
 +		return err;
 +
 +	err = regmap_write(map_dptx, SP_AUX_ADDR_15_8_REG,
 +			   (addr & 0xff00) >> 8);
 +	if (err)
 +		return err;
 +
 +	/*
 +	 * DP AUX CH Address Register #2, only update bits[3:0]
 +	 * [7:4] RESERVED
 +	 * [3:0] AUX_ADDR[19:16], Register control AUX CH address.
 +	 */
 +	err = regmap_update_bits(map_dptx, SP_AUX_ADDR_19_16_REG,
 +				 SP_AUX_ADDR_19_16_MASK,
 +				 (addr & 0xf0000) >> 16);
 +
 +	if (err)
 +		return err;
 +
 +	return 0;
 +}
 +
 +ssize_t anx_aux_transfer(struct regmap *map_dptx, struct drm_dp_aux_msg *msg)
 +{
 +	u8 ctrl1 = msg->request;
 +	u8 ctrl2 = SP_AUX_EN;
 +	u8 *buffer = msg->buffer;
 +	int err;
 +
 +	/* The DP AUX transmit and receive buffer has 16 bytes. */
 +	if (WARN_ON(msg->size > AUX_CH_BUFFER_SIZE))
 +		return -E2BIG;
 +
 +	/* Zero-sized messages specify address-only transactions. */
 +	if (msg->size < 1)
 +		ctrl2 |= SP_ADDR_ONLY;
 +	else	/* For non-zero-sized set the length field. */
 +		ctrl1 |= (msg->size - 1) << SP_AUX_LENGTH_SHIFT;
 +
 +	if ((msg->request & DP_AUX_I2C_READ) == 0) {
 +		/* When WRITE | MOT write values to data buffer */
 +		err = regmap_bulk_write(map_dptx,
 +					SP_DP_BUF_DATA0_REG, buffer,
 +					msg->size);
 +		if (err)
 +			return err;
 +	}
 +
 +	/* Write address and request */
 +	err = anx_aux_address(map_dptx, msg->address);
 +	if (err)
 +		return err;
 +
 +	err = regmap_write(map_dptx, SP_DP_AUX_CH_CTRL1_REG, ctrl1);
 +	if (err)
 +		return err;
 +
 +	/* Start transaction */
 +	err = regmap_update_bits(map_dptx, SP_DP_AUX_CH_CTRL2_REG,
 +				 SP_ADDR_ONLY | SP_AUX_EN, ctrl2);
 +	if (err)
 +		return err;
 +
 +	err = anx_aux_wait(map_dptx);
 +	if (err)
 +		return err;
 +
 +	msg->reply = DP_AUX_I2C_REPLY_ACK;
 +
 +	if ((msg->size > 0) && (msg->request & DP_AUX_I2C_READ)) {
 +		/* Read values from data buffer */
 +		err = regmap_bulk_read(map_dptx,
 +				       SP_DP_BUF_DATA0_REG, buffer,
 +				       msg->size);
 +		if (err)
 +			return err;
 +	}
 +
 +	err = anx_clear_bits(map_dptx, SP_DP_AUX_CH_CTRL2_REG, SP_ADDR_ONLY);
 +	if (err)
 +		return err;
 +
 +	return msg->size;
 +}
 +EXPORT_SYMBOL(anx_aux_transfer);
 +
 +MODULE_DESCRIPTION("Analogix DisplayPort Transmitter common code");
 +MODULE_AUTHOR("Icenowy Zheng <icenowy@aosc.io>");
 +MODULE_LICENSE("GPL v2");
 diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
 index bc0831b127bf..c2ca854613a0 100644
 --- a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
 +++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
@@ -245,4 +245,6 @@
 /* DP AUX Buffer Data Registers */
 #define SP_DP_BUF_DATA0_REG		0xf0
 +ssize_t anx_aux_transfer(struct regmap *map_dptx, struct drm_dp_aux_msg *msg);
 +
 #endif
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0129-dt-bindings-Add-ANX6345-DP-eDP-transmitter-binding.patch
+++ b/patch/kernel/sunxi-dev/0129-dt-bindings-Add-ANX6345-DP-eDP-transmitter-binding.patch
@ -0,0 +1,64 @@
 From db3c5b3983ab2395794ea3ebd5c73ab7b39d2caa Mon Sep 17 00:00:00 2001
 From: Icenowy Zheng <icenowy@aosc.io>
 Date: Thu, 18 Oct 2018 15:33:22 +0800
 Subject: [PATCH 129/146] dt-bindings: Add ANX6345 DP/eDP transmitter binding
 The ANX6345 is an ultra-low power DisplayPort/eDP transmitter designed
 for portable devices.
 Add a binding document for it.
 Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
 ---
 .../bindings/display/bridge/anx6345.txt       | 39 +++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/anx6345.txt
 diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.txt b/Documentation/devicetree/bindings/display/bridge/anx6345.txt
 new file mode 100644
 index 000000000000..0689d4eb5f65
 --- /dev/null
 +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.txt
@@ -0,0 +1,39 @@
 +Analogix ANX6345 eDP Transmitter
 +--------------------------------
 +
 +The ANX6345 is an ultra-low power Full-HD eDP transmitter designed for
 +portable devices.
 +
 +Required properties:
 +
 + - compatible		: "analogix,anx6345"
 + - reg			: I2C address of the device
 + - reset-gpios		: Which GPIO to use for reset
 +
 +Optional properties:
 +
 + - dvdd12-supply	: Regulator for 1.2V digital core power.
 + - dvdd25-supply	: Regulator for 2.5V digital core power.
 + - panel-supply		: Regulator for the power of the panel.
 + - edid			: verbatim EDID data block describing attached
 +			  panel, only used when the panel has no EDID info.
 + - Video port for RGB input, using the DT bindings defined in [1].
 +
 +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
 +
 +Example:
 +
 +anx6345: anx6345@38 {
 +	compatible = "analogix,anx6345";
 +	reg = <0x38>;
 +	reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
 +	panel-supply = <&reg_dc1sw>;
 +	dvdd25-supply = <&reg_dldo2>;
 +	dvdd12-supply = <&reg_fldo1>;
 +
 +	port {
 +		anx6345_in: endpoint {
 +			remote-endpoint = <&tcon0_out_anx6345>;
 +		};
 +	};
 +};
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0130-drm-bridge-Add-Analogix-anx6345-support.patch
+++ b/patch/kernel/sunxi-dev/0130-drm-bridge-Add-Analogix-anx6345-support.patch
@ -0,0 +1,982 @@
 From 2da065ab8aa3f562a02dfd3df4ad971d1229b136 Mon Sep 17 00:00:00 2001
 From: Icenowy Zheng <icenowy@aosc.io>
 Date: Thu, 18 Oct 2018 15:33:23 +0800
 Subject: [PATCH 130/146] drm/bridge: Add Analogix anx6345 support
 The ANX6345 is an ultra-low power DisplayPower/eDP transmitter designed
 for portable devices. This driver adds initial support for RGB to eDP
 mode, without HPD and interrupts, but with possibility to inject EDID.
 This is a configuration usually seen in eDP applications.
 Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
 ---
 drivers/gpu/drm/bridge/analogix/Kconfig       |  11 +
 drivers/gpu/drm/bridge/analogix/Makefile      |   1 +
 .../drm/bridge/analogix/analogix-anx6345.c    | 862 ++++++++++++++++++
 .../drm/bridge/analogix/analogix-i2c-dptx.c   |   2 +-
 .../drm/bridge/analogix/analogix-i2c-dptx.h   |   8 +
 .../bridge/analogix/analogix-i2c-txcommon.h   |   3 +
 6 files changed, 886 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
 diff --git a/drivers/gpu/drm/bridge/analogix/Kconfig b/drivers/gpu/drm/bridge/analogix/Kconfig
 index eb893b465dd8..784ddca83b47 100644
 --- a/drivers/gpu/drm/bridge/analogix/Kconfig
 +++ b/drivers/gpu/drm/bridge/analogix/Kconfig
@@ -15,3 +15,14 @@ config DRM_ANALOGIX_ANX78XX
 	  designed for portable devices. The ANX78XX transforms
 	  the HDMI output of an application processor to MyDP
 	  or DisplayPort.
 +
 +config DRM_ANALOGIX_ANX6345
 +	tristate "Analogix ANX6345 bridge"
 +	select DRM_ANALOGIX_DP_I2C
 +	select DRM_KMS_HELPER
 +	select REGMAP_I2C
 +	help
 +	  ANX6345 is an ultra-low Full-HD DisplayPort/eDP
 +	  transmitter designed for portable devices. The
 +	  ANX6345 transforms the LVTTL RGB output of an
 +	  application processor to eDP or DisplayPort.
 diff --git a/drivers/gpu/drm/bridge/analogix/Makefile b/drivers/gpu/drm/bridge/analogix/Makefile
 index c37e2ded8ce3..3af9feab6e17 100644
 --- a/drivers/gpu/drm/bridge/analogix/Makefile
 +++ b/drivers/gpu/drm/bridge/analogix/Makefile
@@ -3,3 +3,4 @@ analogix_dp_i2c-objs := analogix-i2c-dptx.o
 obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix_dp.o
 obj-$(CONFIG_DRM_ANALOGIX_DP_I2C) += analogix_dp_i2c.o
 obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
 +obj-$(CONFIG_DRM_ANALOGIX_ANX6345) += analogix-anx6345.o
 diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
 new file mode 100644
 index 000000000000..81676407aa6d
 --- /dev/null
 +++ b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
@@ -0,0 +1,863 @@
 +// SPDX-License-Identifier: GPL-2.0
 +/*
 + * Copyright(c) Icenowy Zheng <icenowy@aosc.io>
 + * Based on analogix-anx6345.c, which is:
 + *   Copyright(c) 2016, Analogix Semiconductor.
 + */
 +#include <linux/delay.h>
 +#include <linux/err.h>
 +#include <linux/interrupt.h>
 +#include <linux/i2c.h>
 +#include <linux/kernel.h>
 +#include <linux/module.h>
 +#include <linux/of_gpio.h>
 +#include <linux/of_platform.h>
 +#include <linux/regmap.h>
 +#include <linux/types.h>
 +#include <linux/gpio/consumer.h>
 +#include <linux/regulator/consumer.h>
 +
 +#include <drm/drmP.h>
 +#include <drm/drm_atomic_helper.h>
 +#include <drm/drm_crtc.h>
 +#include <drm/drm_crtc_helper.h>
 +#include <drm/drm_probe_helper.h>
 +#include <drm/drm_dp_helper.h>
 +#include <drm/drm_edid.h>
 +
 +#include "analogix-i2c-dptx.h"
 +#include "analogix-i2c-txcommon.h"
 +
 +#define I2C_NUM_ADDRESSES	2
 +#define I2C_IDX_DPTX		0
 +#define I2C_IDX_TXCOM		1
 +
 +#define XTAL_CLK		270 /* 27M */
 +
 +#define POLL_DELAY		50000 /* us */
 +#define POLL_TIMEOUT		5000000 /* us */
 +
 +static const u8 anx6345_i2c_addresses[] = {
 +	[I2C_IDX_DPTX]	= ANALOGIX_I2C_DPTX,
 +	[I2C_IDX_TXCOM]	= ANALOGIX_I2C_TXCOMMON,
 +};
 +
 +struct anx6345_platform_data {
 +	struct regulator *dvdd12;
 +	struct regulator *dvdd25;
 +	struct regulator *vcc_panel;
 +	struct gpio_desc *gpiod_reset;
 +};
 +
 +struct anx6345 {
 +	struct drm_dp_aux aux;
 +	struct drm_bridge bridge;
 +	struct i2c_client *client;
 +	struct edid *edid;
 +	struct drm_connector connector;
 +	struct drm_dp_link link;
 +	struct anx6345_platform_data pdata;
 +	struct mutex lock;
 +
 +	/*
 +	 * I2C Slave addresses of ANX6345 are mapped as DPTX and SYS
 +	 */
 +	struct i2c_client *i2c_clients[I2C_NUM_ADDRESSES];
 +	struct regmap *map[I2C_NUM_ADDRESSES];
 +
 +	u16 chipid;
 +	u8 dpcd[DP_RECEIVER_CAP_SIZE];
 +
 +	bool powered;
 +};
 +
 +static inline struct anx6345 *connector_to_anx6345(struct drm_connector *c)
 +{
 +	return container_of(c, struct anx6345, connector);
 +}
 +
 +static inline struct anx6345 *bridge_to_anx6345(struct drm_bridge *bridge)
 +{
 +	return container_of(bridge, struct anx6345, bridge);
 +}
 +
 +static int anx6345_set_bits(struct regmap *map, u8 reg, u8 mask)
 +{
 +	return regmap_update_bits(map, reg, mask, mask);
 +}
 +
 +static int anx6345_clear_bits(struct regmap *map, u8 reg, u8 mask)
 +{
 +	return regmap_update_bits(map, reg, mask, 0);
 +}
 +
 +static ssize_t anx6345_aux_transfer(struct drm_dp_aux *aux,
 +				    struct drm_dp_aux_msg *msg)
 +{
 +	struct anx6345 *anx6345 = container_of(aux, struct anx6345, aux);
 +
 +	return anx_aux_transfer(anx6345->map[I2C_IDX_DPTX], msg);
 +}
 +
 +static int anx6345_dp_link_training(struct anx6345 *anx6345)
 +{
 +	unsigned int value;
 +	u8 dp_bw;
 +	int err;
 +
 +	err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
 +				 SP_POWERDOWN_CTRL_REG,
 +				 SP_TOTAL_PD);
 +	if (err)
 +		return err;
 +
 +	err = drm_dp_dpcd_readb(&anx6345->aux, DP_MAX_LINK_RATE, &dp_bw);
 +	if (err < 0)
 +		return err;
 +
 +	switch (dp_bw) {
 +	case DP_LINK_BW_1_62:
 +	case DP_LINK_BW_2_7:
 +		break;
 +
 +	default:
 +		DRM_DEBUG_KMS("DP bandwidth (%#02x) not supported\n", dp_bw);
 +		return -EINVAL;
 +	}
 +
 +	err = anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL1_REG,
 +			       SP_VIDEO_MUTE);
 +	if (err)
 +		return err;
 +
 +	err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
 +				 SP_VID_CTRL1_REG, SP_VIDEO_EN);
 +	if (err)
 +		return err;
 +
 +	/* Get DPCD info */
 +	err = drm_dp_dpcd_read(&anx6345->aux, DP_DPCD_REV,
 +			       &anx6345->dpcd, DP_RECEIVER_CAP_SIZE);
 +	if (err < 0) {
 +		DRM_ERROR("Failed to read DPCD: %d\n", err);
 +		return err;
 +	}
 +
 +	/* Clear channel x SERDES power down */
 +	err = anx6345_clear_bits(anx6345->map[I2C_IDX_DPTX],
 +				 SP_DP_ANALOG_POWER_DOWN_REG, SP_CH0_PD);
 +	if (err)
 +		return err;
 +
 +	/* Check link capabilities */
 +	err = drm_dp_link_probe(&anx6345->aux, &anx6345->link);
 +	if (err < 0) {
 +		DRM_ERROR("Failed to probe link capabilities: %d\n", err);
 +		return err;
 +	}
 +
 +	/* Power up the sink */
 +	err = drm_dp_link_power_up(&anx6345->aux, &anx6345->link);
 +	if (err < 0) {
 +		DRM_ERROR("Failed to power up DisplayPort link: %d\n", err);
 +		return err;
 +	}
 +
 +	/* Possibly enable downspread on the sink */
 +	err = regmap_write(anx6345->map[I2C_IDX_DPTX],
 +			   SP_DP_DOWNSPREAD_CTRL1_REG, 0);
 +	if (err)
 +		return err;
 +
 +	if (anx6345->dpcd[DP_MAX_DOWNSPREAD] & DP_MAX_DOWNSPREAD_0_5) {
 +		DRM_DEBUG("Enable downspread on the sink\n");
 +		/* 4000PPM */
 +		err = regmap_write(anx6345->map[I2C_IDX_DPTX],
 +				   SP_DP_DOWNSPREAD_CTRL1_REG, 8);
 +		if (err)
 +			return err;
 +
 +		err = drm_dp_dpcd_writeb(&anx6345->aux, DP_DOWNSPREAD_CTRL,
 +					 DP_SPREAD_AMP_0_5);
 +		if (err < 0)
 +			return err;
 +	} else {
 +		err = drm_dp_dpcd_writeb(&anx6345->aux, DP_DOWNSPREAD_CTRL, 0);
 +		if (err < 0)
 +			return err;
 +	}
 +
 +	/* Set the lane count and the link rate on the sink */
 +	if (drm_dp_enhanced_frame_cap(anx6345->dpcd))
 +		err = anx6345_set_bits(anx6345->map[I2C_IDX_DPTX],
 +				       SP_DP_SYSTEM_CTRL_BASE + 4,
 +				       SP_ENHANCED_MODE);
 +	else
 +		err = anx6345_clear_bits(anx6345->map[I2C_IDX_DPTX],
 +					 SP_DP_SYSTEM_CTRL_BASE + 4,
 +					 SP_ENHANCED_MODE);
 +	if (err)
 +		return err;
 +
 +	value = drm_dp_link_rate_to_bw_code(anx6345->link.rate);
 +	err = regmap_write(anx6345->map[I2C_IDX_DPTX],
 +			   SP_DP_MAIN_LINK_BW_SET_REG, value);
 +	if (err)
 +		return err;
 +
 +	err = regmap_write(anx6345->map[I2C_IDX_DPTX],
 +			   SP_DP_LANE_COUNT_SET_REG, anx6345->link.num_lanes);
 +	if (err)
 +		return err;
 +
 +	err = drm_dp_link_configure(&anx6345->aux, &anx6345->link);
 +	if (err < 0) {
 +		DRM_ERROR("Failed to configure DisplayPort link: %d\n", err);
 +		return err;
 +	}
 +
 +	/* Start training on the source */
 +	err = regmap_write(anx6345->map[I2C_IDX_DPTX], SP_DP_LT_CTRL_REG,
 +			   SP_LT_EN);
 +	if (err)
 +		return err;
 +
 +	err = regmap_read_poll_timeout(anx6345->map[I2C_IDX_DPTX],
 +				       SP_DP_LT_CTRL_REG,
 +				       value, !(value & SP_DP_LT_INPROGRESS),
 +				       POLL_DELAY, POLL_TIMEOUT);
 +	if (err)
 +		return err;
 +
 +	return 0;
 +}
 +
 +static int anx6345_tx_initialization(struct anx6345 *anx6345)
 +{
 +	int err, i;
 +
 +	/* FIXME: hardcode color depth now */
 +	err = regmap_write(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL2_REG,
 +			   SP_IN_BPC_6BIT << SP_IN_BPC_SHIFT);
 +	if (err)
 +		return err;
 +
 +	err = regmap_write(anx6345->map[I2C_IDX_DPTX], SP_DP_PLL_CTRL_REG, 0);
 +	if (err)
 +		return err;
 +
 +	err = regmap_write(anx6345->map[I2C_IDX_TXCOM],
 +			   SP_ANALOG_DEBUG1_REG, 0);
 +	if (err)
 +		return err;
 +
 +	err = regmap_write(anx6345->map[I2C_IDX_DPTX],
 +			   SP_DP_LINK_DEBUG_CTRL_REG,
 +			   SP_NEW_PRBS7 | SP_M_VID_DEBUG);
 +	if (err)
 +		return err;
 +
 +	err = regmap_write(anx6345->map[I2C_IDX_DPTX],
 +			   SP_DP_ANALOG_POWER_DOWN_REG, 0);
 +	if (err)
 +		return err;
 +
 +	/* Force HPD */
 +	err = anx6345_set_bits(anx6345->map[I2C_IDX_DPTX],
 +			       SP_DP_SYSTEM_CTRL_BASE + 3,
 +			       SP_HPD_FORCE | SP_HPD_CTRL);
 +	if (err)
 +		return err;
 +
 +	for (i = 0; i < 4; i++) {
 +		/* 4 lanes */
 +		err = regmap_write(anx6345->map[I2C_IDX_DPTX],
 +				   SP_DP_LANE0_LT_CTRL_REG + i, 0);
 +		if (err)
 +			return err;
 +	}
 +
 +	/* Reset AUX */
 +	err = anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM],
 +			       SP_RESET_CTRL2_REG, SP_AUX_RST);
 +	if (err)
 +		return err;
 +
 +	err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
 +				 SP_RESET_CTRL2_REG, SP_AUX_RST);
 +	if (err)
 +		return err;
 +
 +	err = anx6345_dp_link_training(anx6345);
 +	if (err)
 +		return err;
 +
 +	return 0;
 +}
 +
 +static void anx6345_poweron(struct anx6345 *anx6345)
 +{
 +	struct anx6345_platform_data *pdata = &anx6345->pdata;
 +	int err;
 +
 +	if (WARN_ON(anx6345->powered))
 +		return;
 +
 +	if (pdata->dvdd12) {
 +		err = regulator_enable(pdata->dvdd12);
 +		if (err) {
 +			DRM_ERROR("Failed to enable DVDD12 regulator: %d\n",
 +				  err);
 +			return;
 +		}
 +
 +		usleep_range(1000, 2000);
 +	}
 +
 +	if (pdata->dvdd25) {
 +		err = regulator_enable(pdata->dvdd25);
 +		if (err) {
 +			DRM_ERROR("Failed to enable DVDD25 regulator: %d\n",
 +				  err);
 +			return;
 +		}
 +
 +		usleep_range(5000, 10000);
 +	}
 +
 +	if (pdata->vcc_panel) {
 +		err = regulator_enable(pdata->vcc_panel);
 +		if (err) {
 +			DRM_ERROR("Failed to enable panel regulator: %d\n",
 +				  err);
 +			return;
 +		}
 +	}
 +
 +	gpiod_set_value_cansleep(pdata->gpiod_reset, 0);
 +	usleep_range(1000, 2000);
 +
 +	gpiod_set_value_cansleep(pdata->gpiod_reset, 1);
 +
 +	/* Power on registers module */
 +	anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_POWERDOWN_CTRL_REG,
 +			 SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
 +	anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM], SP_POWERDOWN_CTRL_REG,
 +			   SP_REGISTER_PD | SP_TOTAL_PD);
 +
 +	anx6345->powered = true;
 +}
 +
 +static void anx6345_poweroff(struct anx6345 *anx6345)
 +{
 +	struct anx6345_platform_data *pdata = &anx6345->pdata;
 +	int err;
 +
 +	if (WARN_ON(!anx6345->powered))
 +		return;
 +
 +	gpiod_set_value_cansleep(pdata->gpiod_reset, 1);
 +	usleep_range(1000, 2000);
 +
 +	if (pdata->vcc_panel) {
 +		err = regulator_disable(pdata->vcc_panel);
 +		if (err) {
 +			DRM_ERROR("Failed to disable panel regulator: %d\n",
 +				  err);
 +			return;
 +		}
 +	}
 +
 +	if (pdata->dvdd25) {
 +		err = regulator_disable(pdata->dvdd25);
 +		if (err) {
 +			DRM_ERROR("Failed to disable DVDD25 regulator: %d\n",
 +				  err);
 +			return;
 +		}
 +
 +		usleep_range(5000, 10000);
 +	}
 +
 +	if (pdata->dvdd12) {
 +		err = regulator_disable(pdata->dvdd12);
 +		if (err) {
 +			DRM_ERROR("Failed to disable DVDD12 regulator: %d\n",
 +				  err);
 +			return;
 +		}
 +
 +		usleep_range(1000, 2000);
 +	}
 +
 +	anx6345->powered = false;
 +}
 +
 +static int anx6345_start(struct anx6345 *anx6345)
 +{
 +	int err;
 +
 +	if (!anx6345->powered)
 +		anx6345_poweron(anx6345);
 +
 +	/* Power on needed modules */
 +	err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM],
 +				 SP_POWERDOWN_CTRL_REG,
 +				 SP_VIDEO_PD | SP_LINK_PD);
 +
 +	err = anx6345_tx_initialization(anx6345);
 +	if (err) {
 +		DRM_ERROR("Failed transmitter initialization: %d\n", err);
 +		goto err_poweroff;
 +	}
 +
 +	/*
 +	 * This delay seems to help keep the hardware in a good state. Without
 +	 * it, there are times where it fails silently.
 +	 */
 +	usleep_range(10000, 15000);
 +
 +	return 0;
 +
 +err_poweroff:
 +	DRM_ERROR("Failed DisplayPort transmitter initialization: %d\n", err);
 +	anx6345_poweroff(anx6345);
 +
 +	return err;
 +}
 +
 +static int anx6345_init_pdata(struct anx6345 *anx6345)
 +{
 +	struct anx6345_platform_data *pdata = &anx6345->pdata;
 +	struct device *dev = &anx6345->client->dev;
 +
 +	/* 1.2V digital core power regulator  */
 +	pdata->dvdd12 = devm_regulator_get(dev, "dvdd12");
 +	if (IS_ERR(pdata->dvdd12)) {
 +		DRM_ERROR("DVDD12 regulator not found\n");
 +		return PTR_ERR(pdata->dvdd12);
 +	}
 +
 +	/* 2.5V digital core power regulator  */
 +	pdata->dvdd25 = devm_regulator_get(dev, "dvdd25");
 +	if (IS_ERR(pdata->dvdd25)) {
 +		DRM_ERROR("DVDD25 regulator not found\n");
 +		return PTR_ERR(pdata->dvdd25);
 +	}
 +
 +	/* panel power regulator  */
 +	pdata->vcc_panel = devm_regulator_get(dev, "panel");
 +	if (IS_ERR(pdata->vcc_panel)) {
 +		DRM_ERROR("panel regulator  not found\n");
 +		return PTR_ERR(pdata->vcc_panel);
 +	}
 +
 +	/* GPIO for chip reset */
 +	pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
 +
 +	return PTR_ERR_OR_ZERO(pdata->gpiod_reset);
 +}
 +
 +static int anx6345_config_dp_output(struct anx6345 *anx6345)
 +{
 +	int err;
 +
 +	err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL1_REG,
 +				 SP_VIDEO_MUTE);
 +	if (err)
 +		return err;
 +
 +	/* Enable DP output */
 +	err = anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_VID_CTRL1_REG,
 +			       SP_VIDEO_EN);
 +	if (err)
 +		return err;
 +
 +	/* Force stream valid */
 +	err = anx6345_set_bits(anx6345->map[I2C_IDX_DPTX],
 +			       SP_DP_SYSTEM_CTRL_BASE + 3,
 +			       SP_STRM_FORCE | SP_STRM_CTRL);
 +	if (err)
 +		return err;
 +
 +	return 0;
 +}
 +
 +static int anx6345_get_downstream_info(struct anx6345 *anx6345)
 +{
 +	u8 value;
 +	int err;
 +
 +	err = drm_dp_dpcd_readb(&anx6345->aux, DP_SINK_COUNT, &value);
 +	if (err < 0) {
 +		DRM_ERROR("Get sink count failed %d\n", err);
 +		return err;
 +	}
 +
 +	if (!DP_GET_SINK_COUNT(value)) {
 +		DRM_ERROR("Downstream disconnected\n");
 +		return -EIO;
 +	}
 +
 +	return 0;
 +}
 +
 +static int anx6345_probe_edid_from_of(struct anx6345 *anx6345)
 +{
 +	const u8 *edidp;
 +	int len;
 +
 +	if (!anx6345->bridge.of_node)
 +		return -ENODEV;
 +
 +	edidp = of_get_property(anx6345->bridge.of_node, "edid", &len);
 +	if (!edidp || len != EDID_LENGTH)
 +		return -EINVAL;
 +
 +	anx6345->edid = devm_kmemdup(&anx6345->client->dev, edidp,
 +				     len, GFP_KERNEL);
 +
 +	if (!anx6345->edid)
 +		return -ENOMEM;
 +
 +	return 0;
 +}
 +
 +static int anx6345_get_modes(struct drm_connector *connector)
 +{
 +	struct anx6345 *anx6345 = connector_to_anx6345(connector);
 +	int err, num_modes = 0;
 +
 +	if (WARN_ON(!anx6345->powered))
 +		return 0;
 +
 +	if (anx6345->edid)
 +		return drm_add_edid_modes(connector, anx6345->edid);
 +
 +	mutex_lock(&anx6345->lock);
 +
 +	err = anx6345_get_downstream_info(anx6345);
 +	if (err) {
 +		DRM_ERROR("Failed to get downstream info: %d\n", err);
 +		goto unlock;
 +	}
 +
 +	anx6345->edid = drm_get_edid(connector, &anx6345->aux.ddc);
 +	if (!anx6345->edid)
 +		DRM_ERROR("Failed to read EDID from panel\n");
 +
 +	if (!anx6345->edid) {
 +		err = anx6345_probe_edid_from_of(anx6345);
 +		if (err) {
 +			DRM_ERROR("Failed to probe EDID from device tree\n");
 +			goto unlock;
 +		}
 +	}
 +
 +	err = drm_connector_update_edid_property(connector,
 +						 anx6345->edid);
 +	if (err) {
 +		DRM_ERROR("Failed to update EDID property: %d\n", err);
 +		goto unlock;
 +	}
 +
 +	num_modes = drm_add_edid_modes(connector, anx6345->edid);
 +
 +unlock:
 +	mutex_unlock(&anx6345->lock);
 +
 +	return num_modes;
 +}
 +
 +static const struct drm_connector_helper_funcs anx6345_connector_helper_funcs = {
 +	.get_modes = anx6345_get_modes,
 +};
 +
 +static enum drm_connector_status anx6345_detect(struct drm_connector *connector,
 +						bool force)
 +{
 +	return connector_status_connected;
 +}
 +
 +static const struct drm_connector_funcs anx6345_connector_funcs = {
 +	.fill_modes = drm_helper_probe_single_connector_modes,
 +	.detect = anx6345_detect,
 +	.destroy = drm_connector_cleanup,
 +	.reset = drm_atomic_helper_connector_reset,
 +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 +};
 +
 +static int anx6345_bridge_attach(struct drm_bridge *bridge)
 +{
 +	struct anx6345 *anx6345 = bridge_to_anx6345(bridge);
 +	int err;
 +
 +	if (!bridge->encoder) {
 +		DRM_ERROR("Parent encoder object not found");
 +		return -ENODEV;
 +	}
 +
 +	/* Register aux channel */
 +	anx6345->aux.name = "DP-AUX";
 +	anx6345->aux.dev = &anx6345->client->dev;
 +	anx6345->aux.transfer = anx6345_aux_transfer;
 +
 +	err = drm_dp_aux_register(&anx6345->aux);
 +	if (err < 0) {
 +		DRM_ERROR("Failed to register aux channel: %d\n", err);
 +		return err;
 +	}
 +
 +	err = drm_connector_init(bridge->dev, &anx6345->connector,
 +				 &anx6345_connector_funcs,
 +				 DRM_MODE_CONNECTOR_eDP);
 +	if (err) {
 +		DRM_ERROR("Failed to initialize connector: %d\n", err);
 +		return err;
 +	}
 +
 +	drm_connector_helper_add(&anx6345->connector,
 +				 &anx6345_connector_helper_funcs);
 +
 +	err = drm_connector_register(&anx6345->connector);
 +	if (err) {
 +		DRM_ERROR("Failed to register connector: %d\n", err);
 +		return err;
 +	}
 +
 +	anx6345->connector.polled = DRM_CONNECTOR_POLL_HPD;
 +
 +	err = drm_connector_attach_encoder(&anx6345->connector,
 +					   bridge->encoder);
 +	if (err) {
 +		DRM_ERROR("Failed to link up connector to encoder: %d\n", err);
 +		return err;
 +	}
 +
 +	return 0;
 +}
 +
 +static bool anx6345_bridge_mode_fixup(struct drm_bridge *bridge,
 +				      const struct drm_display_mode *mode,
 +				      struct drm_display_mode *adjusted_mode)
 +{
 +	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
 +		return false;
 +
 +	/* Max 1200p at 5.4 Ghz, one lane */
 +	if (mode->clock > 154000)
 +		return false;
 +
 +	return true;
 +}
 +
 +static void anx6345_bridge_disable(struct drm_bridge *bridge)
 +{
 +	struct anx6345 *anx6345 = bridge_to_anx6345(bridge);
 +
 +	/* Power off all modules except configuration registers access */
 +	anx6345_set_bits(anx6345->map[I2C_IDX_TXCOM], SP_POWERDOWN_CTRL_REG,
 +			 SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
 +}
 +
 +static void anx6345_bridge_mode_set(struct drm_bridge *bridge,
 +				    const struct drm_display_mode *mode,
 +				    const struct drm_display_mode *adjusted_mode)
 +{
 +	struct anx6345 *anx6345 = bridge_to_anx6345(bridge);
 +
 +	if (WARN_ON(!anx6345->powered))
 +		return;
 +}
 +
 +static void anx6345_bridge_enable(struct drm_bridge *bridge)
 +{
 +	struct anx6345 *anx6345 = bridge_to_anx6345(bridge);
 +	int err;
 +
 +	err = anx6345_start(anx6345);
 +	if (err) {
 +		DRM_ERROR("Failed to initialize: %d\n", err);
 +		return;
 +	}
 +
 +	err = anx6345_config_dp_output(anx6345);
 +	if (err)
 +		DRM_ERROR("Failed to enable DP output: %d\n", err);
 +}
 +
 +static const struct drm_bridge_funcs anx6345_bridge_funcs = {
 +	.attach = anx6345_bridge_attach,
 +	.mode_fixup = anx6345_bridge_mode_fixup,
 +	.disable = anx6345_bridge_disable,
 +	.mode_set = anx6345_bridge_mode_set,
 +	.enable = anx6345_bridge_enable,
 +};
 +
 +static void unregister_i2c_dummy_clients(struct anx6345 *anx6345)
 +{
 +	unsigned int i;
 +
 +	for (i = 1; i < ARRAY_SIZE(anx6345->i2c_clients); i++)
 +		if (anx6345->i2c_clients[i] &&
 +		    anx6345->i2c_clients[i]->addr != anx6345->client->addr)
 +			i2c_unregister_device(anx6345->i2c_clients[i]);
 +}
 +
 +static const struct regmap_config anx6345_regmap_config = {
 +	.reg_bits = 8,
 +	.val_bits = 8,
 +	.max_register = 0xff,
 +};
 +
 +static const u16 anx6345_chipid_list[] = {
 +	0x6345,
 +};
 +
 +static int anx6345_i2c_probe(struct i2c_client *client,
 +			     const struct i2c_device_id *id)
 +{
 +	struct anx6345 *anx6345;
 +	struct anx6345_platform_data *pdata;
 +	unsigned int i, idl, idh, version;
 +	bool found = false;
 +	int err;
 +
 +	anx6345 = devm_kzalloc(&client->dev, sizeof(*anx6345), GFP_KERNEL);
 +	if (!anx6345)
 +		return -ENOMEM;
 +
 +	pdata = &anx6345->pdata;
 +
 +	mutex_init(&anx6345->lock);
 +
 +#if IS_ENABLED(CONFIG_OF)
 +	anx6345->bridge.of_node = client->dev.of_node;
 +#endif
 +
 +	anx6345->client = client;
 +	i2c_set_clientdata(client, anx6345);
 +
 +	err = anx6345_init_pdata(anx6345);
 +	if (err) {
 +		DRM_ERROR("Failed to initialize pdata: %d\n", err);
 +		return err;
 +	}
 +
 +	/* Map slave addresses of ANX6345 */
 +	for (i = 0; i < I2C_NUM_ADDRESSES; i++) {
 +		if (anx6345_i2c_addresses[i] >> 1 != client->addr)
 +			anx6345->i2c_clients[i] = i2c_new_dummy(client->adapter,
 +						anx6345_i2c_addresses[i] >> 1);
 +		else
 +			anx6345->i2c_clients[i] = client;
 +
 +		if (!anx6345->i2c_clients[i]) {
 +			err = -ENOMEM;
 +			DRM_ERROR("Failed to reserve I2C bus %02x\n",
 +				  anx6345_i2c_addresses[i]);
 +			goto err_unregister_i2c;
 +		}
 +
 +		anx6345->map[i] = devm_regmap_init_i2c(anx6345->i2c_clients[i],
 +						       &anx6345_regmap_config);
 +		if (IS_ERR(anx6345->map[i])) {
 +			err = PTR_ERR(anx6345->map[i]);
 +			DRM_ERROR("Failed regmap initialization %02x\n",
 +				  anx6345_i2c_addresses[i]);
 +			goto err_unregister_i2c;
 +		}
 +	}
 +
 +	/* Look for supported chip ID */
 +	anx6345_poweron(anx6345);
 +
 +	err = regmap_read(anx6345->map[I2C_IDX_TXCOM], SP_DEVICE_IDL_REG,
 +			  &idl);
 +	if (err)
 +		goto err_poweroff;
 +
 +	err = regmap_read(anx6345->map[I2C_IDX_TXCOM], SP_DEVICE_IDH_REG,
 +			  &idh);
 +	if (err)
 +		goto err_poweroff;
 +
 +	anx6345->chipid = (u8)idl | ((u8)idh << 8);
 +
 +	err = regmap_read(anx6345->map[I2C_IDX_TXCOM], SP_DEVICE_VERSION_REG,
 +			  &version);
 +	if (err)
 +		goto err_poweroff;
 +
 +	for (i = 0; i < ARRAY_SIZE(anx6345_chipid_list); i++) {
 +		if (anx6345->chipid == anx6345_chipid_list[i]) {
 +			DRM_INFO("Found ANX%x (ver. %d) eDP Transmitter\n",
 +				 anx6345->chipid, version);
 +			found = true;
 +			break;
 +		}
 +	}
 +
 +	if (!found) {
 +		DRM_ERROR("ANX%x (ver. %d) not supported by this driver\n",
 +			  anx6345->chipid, version);
 +		err = -ENODEV;
 +		goto err_poweroff;
 +	}
 +
 +	anx6345->bridge.funcs = &anx6345_bridge_funcs;
 +
 +	drm_bridge_add(&anx6345->bridge);
 +
 +	return 0;
 +
 +err_poweroff:
 +	anx6345_poweroff(anx6345);
 +
 +err_unregister_i2c:
 +	unregister_i2c_dummy_clients(anx6345);
 +	return err;
 +}
 +
 +static int anx6345_i2c_remove(struct i2c_client *client)
 +{
 +	struct anx6345 *anx6345 = i2c_get_clientdata(client);
 +
 +	drm_bridge_remove(&anx6345->bridge);
 +
 +	unregister_i2c_dummy_clients(anx6345);
 +
 +	kfree(anx6345->edid);
 +
 +	return 0;
 +}
 +
 +static const struct i2c_device_id anx6345_id[] = {
 +	{ "anx6345", 0 },
 +	{ /* sentinel */ }
 +};
 +MODULE_DEVICE_TABLE(i2c, anx6345_id);
 +
 +#if IS_ENABLED(CONFIG_OF)
 +static const struct of_device_id anx6345_match_table[] = {
 +	{ .compatible = "analogix,anx6345", },
 +	{ /* sentinel */ },
 +};
 +MODULE_DEVICE_TABLE(of, anx6345_match_table);
 +#endif
 +
 +static struct i2c_driver anx6345_driver = {
 +	.driver = {
 +		   .name = "anx6345",
 +		   .of_match_table = of_match_ptr(anx6345_match_table),
 +		  },
 +	.probe = anx6345_i2c_probe,
 +	.remove = anx6345_i2c_remove,
 +	.id_table = anx6345_id,
 +};
 +module_i2c_driver(anx6345_driver);
 +
 +MODULE_DESCRIPTION("ANX6345 eDP Transmitter driver");
 +MODULE_AUTHOR("Icenowy Zheng <icenowy@aosc.io>");
 +MODULE_LICENSE("GPL v2");
 diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
 index 9cb30962032e..53b0e73d6a24 100644
 --- a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
 +++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c
@@ -117,7 +117,7 @@ ssize_t anx_aux_transfer(struct regmap *map_dptx, struct drm_dp_aux_msg *msg)
 	else	/* For non-zero-sized set the length field. */
 		ctrl1 |= (msg->size - 1) << SP_AUX_LENGTH_SHIFT;
 -	if ((msg->request & DP_AUX_I2C_READ) == 0) {
 +	if ((msg->size > 0) && ((msg->request & DP_AUX_I2C_READ) == 0)) {
 		/* When WRITE | MOT write values to data buffer */
 		err = regmap_bulk_write(map_dptx,
 					SP_DP_BUF_DATA0_REG, buffer,
 diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
 index c2ca854613a0..b29a0b3bc23c 100644
 --- a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
 +++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.h
@@ -75,7 +75,11 @@
 #define SP_CHA_STA			BIT(2)
 /* Bits for DP System Control Register 3 */
 #define SP_HPD_STATUS			BIT(6)
 +#define SP_HPD_FORCE			BIT(5)
 +#define SP_HPD_CTRL			BIT(4)
 #define SP_STRM_VALID			BIT(2)
 +#define SP_STRM_FORCE			BIT(1)
 +#define SP_STRM_CTRL			BIT(0)
 /* Bits for DP System Control Register 4 */
 #define SP_ENHANCED_MODE		BIT(3)
@@ -120,6 +124,9 @@
 #define SP_LINK_BW_SET_MASK		0x1f
 #define SP_INITIAL_SLIM_M_AUD_SEL	BIT(5)
 +/* DP Lane Count Setting Register */
 +#define SP_DP_LANE_COUNT_SET_REG	0xa1
 +
 /* DP Training Pattern Set Register */
 #define SP_DP_TRAINING_PATTERN_SET_REG	0xa2
@@ -133,6 +140,7 @@
 /* DP Link Training Control Register */
 #define SP_DP_LT_CTRL_REG		0xa8
 +#define SP_DP_LT_INPROGRESS		0x80
 #define SP_LT_ERROR_TYPE_MASK		0x70
 #  define SP_LT_NO_ERROR		0x00
 #  define SP_LT_AUX_WRITE_ERROR		0x01
 diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
 index 7d683573e970..480c98a225b1 100644
 --- a/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
 +++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-txcommon.h
@@ -183,6 +183,9 @@
 #define SP_VBIT				BIT(1)
 #define SP_AUDIO_LAYOUT			BIT(0)
 +/* Analog Debug Register 1 */
 +#define SP_ANALOG_DEBUG1_REG		0xdc
 +
 /* Analog Debug Register 2 */
 #define SP_ANALOG_DEBUG2_REG		0xdd
 #define SP_FORCE_SW_OFF_BYPASS		0x20
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0132-arm64-allwinner-a64-enable-ANX6345-bridge-on-Pineboo.patch
+++ b/patch/kernel/sunxi-dev/0132-arm64-allwinner-a64-enable-ANX6345-bridge-on-Pineboo.patch
@ -0,0 +1,84 @@
 From 82fe5562e8d5cb289e97ff8d259b21889e72b03b Mon Sep 17 00:00:00 2001
 From: Icenowy Zheng <icenowy@aosc.io>
 Date: Thu, 18 Oct 2018 15:33:25 +0800
 Subject: [PATCH 132/146] arm64: allwinner: a64: enable ANX6345 bridge on
 Pinebook
 Pinebook has an ANX6345 bridge connected to the RGB666 LCD output, and
 the I2C controlling signals are connected to R_I2C bus.
 Enable it in the device tree, and add a usable EDID from the panel's
 datasheet (at least 14" Pinebook used a panel without EDID).
 Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
 ---
 .../dts/allwinner/sun50i-a64-pinebook.dts     | 39 +++++++++++++++++++
 1 file changed, 39 insertions(+)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
 index b55ac4e1df37..8c9bd4dfbbba 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -123,6 +123,10 @@
 	};
 };
 +&mixer0 {
 +	status = "okay";
 +};
 +
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
@@ -175,6 +179,27 @@
 	status = "okay";
 };
 +&r_i2c {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&r_i2c_pins_a>;
 +	status = "okay";
 +
 +	anx6345: anx6345@38 {
 +		compatible = "analogix,anx6345";
 +		reg = <0x38>;
 +		reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
 +		panel-supply = <&reg_dc1sw>;
 +		dvdd25-supply = <&reg_dldo2>;
 +		dvdd12-supply = <&reg_fldo1>;
 +
 +		port {
 +			anx6345_in: endpoint {
 +				remote-endpoint = <&tcon0_out_anx6345>;
 +			};
 +		};
 +	};
 +};
 +
 &r_rsb {
 	status = "okay";
@@ -348,6 +373,20 @@
 			"MIC2", "Internal Microphone Right";
 };
 +&tcon0 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&lcd_rgb666_pins>;
 +
 +	status = "okay";
 +};
 +
 +&tcon0_out {
 +	tcon0_out_anx6345: endpoint@0 {
 +		reg = <0>;
 +		remote-endpoint = <&anx6345_in>;
 +	};
 +};
 +
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0133-arm64-allwinner-a64-enable-ANX6345-bridge-on-TERES-I.patch.disabled
+++ b/patch/kernel/sunxi-dev/0133-arm64-allwinner-a64-enable-ANX6345-bridge-on-TERES-I.patch.disabled
@ -0,0 +1,87 @@
 From 955974c9ba484fc2b7e4396b5fdc6687a9a530a0 Mon Sep 17 00:00:00 2001
 From: Icenowy Zheng <icenowy@aosc.io>
 Date: Thu, 18 Oct 2018 15:33:26 +0800
 Subject: [PATCH 133/146] arm64: allwinner: a64: enable ANX6345 bridge on
 TERES-I
 TERES-I has an ANX6345 bridge connected to the RGB666 LCD output, and
 the I2C controlling signals are connected to I2C0 bus.
 Enable it in the device tree.
 Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
 ---
 .../boot/dts/allwinner/sun50i-a64-teres-i.dts | 40 +++++++++++++++++--
 1 file changed, 36 insertions(+), 4 deletions(-)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
 index 81f8e0098699..6c3318b3c648 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -72,20 +72,38 @@
 	};
 };
 +&de {
 +	status = "okay";
 +};
 +
 &ehci1 {
 	status = "okay";
 };
 -/* The ANX6345 eDP-bridge is on i2c0. There is no linux (mainline)
 - * driver for this chip at the moment, the bootloader initializes it.
 - * However it can be accessed with the i2c-dev driver from user space.
 - */
 &i2c0 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 +
 +	anx6345: anx6345@38 {
 +		compatible = "analogix,anx6345";
 +		reg = <0x38>;
 +		reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
 +		dvdd25-supply = <&reg_dldo2>;
 +		dvdd12-supply = <&reg_dldo3>;
 +
 +		port {
 +			anx6345_in: endpoint {
 +				remote-endpoint = <&tcon0_out_anx6345>;
 +			};
 +		};
 +	};
 +};
 +
 +&mixer0 {
 +	status = "okay";
 };
 &mmc0 {
@@ -258,6 +276,20 @@
 	vcc-hdmi-supply = <&reg_dldo1>;
 };
 +&tcon0 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&lcd_rgb666_pins>;
 +
 +	status = "okay";
 +};
 +
 +&tcon0_out {
 +	tcon0_out_anx6345: endpoint@0 {
 +		reg = <0>;
 +		remote-endpoint = <&anx6345_in>;
 +	};
 +};
 +
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0136-hdmi-audio-fixup.patch
+++ b/patch/kernel/sunxi-dev/0136-hdmi-audio-fixup.patch
@ -0,0 +1,24 @@
 From 2c38da8ed7cc1f7dabe72c4d455ba25e0ba18fe7 Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Sun, 28 Oct 2018 19:06:28 -0700
 Subject: [PATCH 136/146] hdmi audio fixup
 ---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 1 +
 1 file changed, 1 insertion(+)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
 index 0f5b412cfc81..f507bb1d8c3d 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -1044,6 +1044,7 @@
 		};
 		hdmi: hdmi@1ee0000 {
 +			#sound-dai-cells = <0>;
 			compatible = "allwinner,sun50i-a64-dw-hdmi",
 				     "allwinner,sun8i-a83t-dw-hdmi";
 			reg = <0x01ee0000 0x10000>;
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0137-Pinebook-HDMI-audio.patch
+++ b/patch/kernel/sunxi-dev/0137-Pinebook-HDMI-audio.patch
@ -0,0 +1,39 @@
 From 59197ec5632d29d173aae2fbe6c92402fc2f0a58 Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Sun, 28 Oct 2018 19:07:23 -0700
 Subject: [PATCH 137/146] Pinebook HDMI audio
 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
 ---
 arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts | 8 ++++++++
 1 file changed, 8 insertions(+)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
 index 8c9bd4dfbbba..0f788400ece0 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -123,6 +123,10 @@
 	};
 };
 +&i2s2 {
 +	status = "okay";
 +};
 +
 &mixer0 {
 	status = "okay";
 };
@@ -373,6 +377,10 @@
 			"MIC2", "Internal Microphone Right";
 };
 +&sound_hdmi {
 +	status = "okay";
 +};
 +
 &tcon0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&lcd_rgb666_pins>;
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0139-Bluetooth-Add-new-quirk-for-broken-local-ext-feature.patch
+++ b/patch/kernel/sunxi-dev/0139-Bluetooth-Add-new-quirk-for-broken-local-ext-feature.patch
@ -0,0 +1,54 @@
 From e4a72ee5f7717daaa2928b3d18a5327739c8b180 Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Wed, 31 Oct 2018 19:40:18 -0700
 Subject: [PATCH 139/146] Bluetooth: Add new quirk for broken local ext
 features max_page
 Some adapters (e.g. RTL8723CS) advertise that they have more than
 2 pages for local ext features, but they don't support any features
 declared in these pages. RTL8723CS reports max_page = 2 and declares
 support for sync train and secure connection, but it responds with
 either garbage or with error in status on corresponding commands.
 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
 ---
 include/net/bluetooth/hci.h | 7 +++++++
 net/bluetooth/hci_event.c   | 4 +++-
 2 files changed, 10 insertions(+), 1 deletion(-)
 diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
 index cdd9f1fe7cfa..32b9195f6fca 100644
 --- a/include/net/bluetooth/hci.h
 +++ b/include/net/bluetooth/hci.h
@@ -192,6 +192,13 @@ enum {
 	 *
 	 */
 	HCI_QUIRK_NON_PERSISTENT_SETUP,
 +
 +	/* When this quirk is set, max_page for local extended features
 +	 * is set to 1, even if controller reports higher number. Some
 +	 * controllers (e.g. RTL8723CS) report more pages, but they
 +	 * don't actually support features declared there.
 +	 */
 +	HCI_QUIRK_BROKEN_LOCAL_EXT_FTR_MAX_PAGE,
 };
 /* HCI device flags */
 diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
 index f12555f23a49..3eb289711dea 100644
 --- a/net/bluetooth/hci_event.c
 +++ b/net/bluetooth/hci_event.c
@@ -639,7 +639,9 @@ static void hci_cc_read_local_ext_features(struct hci_dev *hdev,
 	if (rp->status)
 		return;
 -	if (hdev->max_page < rp->max_page)
 +	if (!test_bit(HCI_QUIRK_BROKEN_LOCAL_EXT_FTR_MAX_PAGE,
 +		      &hdev->quirks) &&
 +	    hdev->max_page < rp->max_page)
 		hdev->max_page = rp->max_page;
 	if (rp->page < HCI_MAX_PAGES)
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0140-Bluetooth-hci_h5-Add-support-for-reset-GPIO.patch
+++ b/patch/kernel/sunxi-dev/0140-Bluetooth-hci_h5-Add-support-for-reset-GPIO.patch
@ -0,0 +1,57 @@
 From e8a404daea8d869304fdf810ac502cda8fbb4999 Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Wed, 31 Oct 2018 19:48:25 -0700
 Subject: [PATCH 140/146] Bluetooth: hci_h5: Add support for reset GPIO
 Some boards (e.g. Pine64 and Pinebook) wire a GPIO to reset pin of
 RTL8723BS
 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
 ---
 drivers/bluetooth/hci_h5.c | 9 +++++++++
 1 file changed, 9 insertions(+)
 diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
 index 8eede1197cd2..6e047df4f475 100644
 --- a/drivers/bluetooth/hci_h5.c
 +++ b/drivers/bluetooth/hci_h5.c
@@ -107,6 +107,7 @@ struct h5 {
 	const struct h5_vnd *vnd;
 	const char *id;
 +	struct gpio_desc *reset_gpio;
 	struct gpio_desc *enable_gpio;
 	struct gpio_desc *device_wake_gpio;
 };
@@ -831,6 +832,10 @@ static int h5_serdev_probe(struct serdev_device *serdev)
 	if (IS_ERR(h5->device_wake_gpio))
 		return PTR_ERR(h5->device_wake_gpio);
 +	h5->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
 +	if (IS_ERR(h5->reset_gpio))
 +		return PTR_ERR(h5->reset_gpio);
 +
 	return hci_uart_register_device(&h5->serdev_hu, &h5p);
 }
@@ -897,6 +902,9 @@ static void h5_btrtl_open(struct h5 *h5)
 	/* The controller needs up to 500ms to wakeup */
 	gpiod_set_value_cansleep(h5->enable_gpio, 1);
 +	/* Take it out of reset */
 +	gpiod_set_value_cansleep(h5->reset_gpio, 0);
 +	msleep(100);
 	gpiod_set_value_cansleep(h5->device_wake_gpio, 1);
 	msleep(500);
 }
@@ -904,6 +912,7 @@ static void h5_btrtl_open(struct h5 *h5)
 static void h5_btrtl_close(struct h5 *h5)
 {
 	gpiod_set_value_cansleep(h5->device_wake_gpio, 0);
 +	gpiod_set_value_cansleep(h5->reset_gpio, 1);
 	gpiod_set_value_cansleep(h5->enable_gpio, 0);
 }
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0141-dt-bindings-net-bluetooth-Add-rtl8723bs-bluetooth.patch
+++ b/patch/kernel/sunxi-dev/0141-dt-bindings-net-bluetooth-Add-rtl8723bs-bluetooth.patch
@ -0,0 +1,57 @@
 From d063238f64a1f0a4e8baf11e55d9cc1989816ee6 Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Wed, 31 Oct 2018 20:05:14 -0700
 Subject: [PATCH 141/146] dt-bindings: net: bluetooth: Add rtl8723bs-bluetooth
 Add binding document for bluetooth part of RTL8723BS/RTL8723CS
 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
 ---
 .../bindings/net/rtl8723bs-bluetooth.txt      | 35 +++++++++++++++++++
 1 file changed, 35 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt
 diff --git a/Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt b/Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt
 new file mode 100644
 index 000000000000..8357f242ae4c
 --- /dev/null
 +++ b/Documentation/devicetree/bindings/net/rtl8723bs-bluetooth.txt
@@ -0,0 +1,35 @@
 +RTL8723BS/RTL8723CS Bluetooth
 +---------------------
 +
 +RTL8723CS/RTL8723CS is WiFi + BT chip. WiFi part is connected over SDIO, while
 +BT is connected over serial. It speaks H5 protocol with few extra commands
 +to upload firmware and change module speed.
 +
 +Required properties:
 +
 + - compatible: should be one of the following:
 +   * "realtek,rtl8723bs-bt"
 +   * "realtek,rtl8723cs-bt"
 +Optional properties:
 +
 + - device-wake-gpios: GPIO specifier, used to wakeup the BT module (active high)
 + - enable-gpios: GPIO specifier, used to enable the BT module (active high)
 + - host-wake-gpios: GPIO specifier, used to wakeup the host processor (active high)
 + - firmware-postfix: firmware postfix to be used for firmware config
 + - reset-gpios: GPIO specifier, used to reset the BT module (active high)
 +
 +Example:
 +
 +&uart1 {
 +       pinctrl-names = "default";
 +       pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
 +       status = "okay";
 +
 +       bluetooth {
 +               compatible = "realtek,rtl8723bs-bt";
 +               reset-gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
 +               device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
 +               host-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
 +               firmware-postfix="pine64";
 +       };
 +};
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0142-Bluetooth-hci_h5-Add-support-for-binding-RTL8723BS-w.patch
+++ b/patch/kernel/sunxi-dev/0142-Bluetooth-hci_h5-Add-support-for-binding-RTL8723BS-w.patch
@ -0,0 +1,69 @@
 From 38caa52f547c63c9cd7aa19259bb6806cff7d50d Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Wed, 31 Oct 2018 20:07:41 -0700
 Subject: [PATCH 142/146] Bluetooth: hci_h5: Add support for binding RTL8723BS
 with device tree
 RTL8723BS is often used in ARM boards, so add ability to bind it
 using device tree.
 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
 ---
 drivers/bluetooth/hci_h5.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
 diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
 index 6e047df4f475..9cc10e299fa8 100644
 --- a/drivers/bluetooth/hci_h5.c
 +++ b/drivers/bluetooth/hci_h5.c
@@ -26,6 +26,7 @@
 #include <linux/gpio/consumer.h>
 #include <linux/kernel.h>
 #include <linux/mod_devicetable.h>
 +#include <linux/of_device.h>
 #include <linux/serdev.h>
 #include <linux/skbuff.h>
@@ -821,6 +822,11 @@ static int h5_serdev_probe(struct serdev_device *serdev)
 		if (h5->vnd->acpi_gpio_map)
 			devm_acpi_dev_add_driver_gpios(dev,
 						       h5->vnd->acpi_gpio_map);
 +	} else {
 +		h5->vnd = (const struct h5_vnd *)
 +				of_device_get_match_data(&serdev->dev);
 +		of_property_read_string(serdev->dev.of_node,
 +					"firmware-postfix", &h5->id);
 	}
 	h5->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
@@ -944,13 +950,27 @@ static const struct acpi_device_id h5_acpi_match[] = {
 MODULE_DEVICE_TABLE(acpi, h5_acpi_match);
 #endif
 +static struct h5_vnd rtl8723_of_vnd = {
 +	.setup		= h5_btrtl_setup,
 +	.open		= h5_btrtl_open,
 +	.close		= h5_btrtl_close,
 +};
 +
 +static const struct of_device_id h5_of_match[] = {
 +	{ .compatible = "realtek,rtl8723bs-bt", .data = &rtl8723_of_vnd },
 +	{ .compatible = "realtek,rtl8723cs-bt", .data = &rtl8723_of_vnd },
 +	{ /* sentinel */ },
 +};
 +MODULE_DEVICE_TABLE(of, h5_of_match);
 +
 static struct serdev_device_driver h5_serdev_driver = {
 	.probe = h5_serdev_probe,
 	.remove = h5_serdev_remove,
 	.driver = {
 		.name = "hci_uart_h5",
 		.acpi_match_table = ACPI_PTR(h5_acpi_match),
 		.pm = &h5_serdev_pm_ops,
 +		.of_match_table = of_match_ptr(h5_of_match),
 	},
 };
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0143-Bluetooth-btrtl-add-support-for-the-RTL8723CS.patch
+++ b/patch/kernel/sunxi-dev/0143-Bluetooth-btrtl-add-support-for-the-RTL8723CS.patch
@ -0,0 +1,311 @@
 From 08c47cbb508e40e5e404055f77653474d5793e27 Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Wed, 31 Oct 2018 20:33:22 -0700
 Subject: [PATCH 143/146] Bluetooth: btrtl: add support for the RTL8723CS
 The Realtek RTL8723CS is SDIO WiFi chip. It also contains a Bluetooth
 module which is connected via UART to the host.
 It shares lmp subversion with 8703B, so Realtek's userspace
 initialization tool (rtk_hciattach) differentiates varieties of RTL8723CS
 (CG, VF, XX) with RTL8703B using vendor's command to read chip type.
 Also this chip declares support for some features it doesn't support
 so add a quirk to indicate that these features are broken.
 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
 ---
 drivers/bluetooth/btrtl.c  | 128 ++++++++++++++++++++++++++++++++++++-
 drivers/bluetooth/btrtl.h  |  12 ++++
 drivers/bluetooth/hci_h5.c |   4 ++
 3 files changed, 141 insertions(+), 3 deletions(-)
 diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
 index 7f9ea8e4c1b2..f9474e78bcfa 100644
 --- a/drivers/bluetooth/btrtl.c
 +++ b/drivers/bluetooth/btrtl.c
@@ -27,8 +27,12 @@
 #define VERSION "0.1"
 +#define RTL_CHIP_8723CS_CG	3
 +#define RTL_CHIP_8723CS_VF	4
 +#define RTL_CHIP_8723CS_XX	5
 #define RTL_EPATCH_SIGNATURE	"Realtech"
 #define RTL_ROM_LMP_3499	0x3499
 +#define RTL_ROM_LMP_8703B	0x8703
 #define RTL_ROM_LMP_8723A	0x1200
 #define RTL_ROM_LMP_8723B	0x8723
 #define RTL_ROM_LMP_8821A	0x8821
@@ -40,6 +44,7 @@
 #define IC_MATCH_FL_HCIREV	(1 << 1)
 #define IC_MATCH_FL_HCIVER	(1 << 2)
 #define IC_MATCH_FL_HCIBUS	(1 << 3)
 +#define IC_MATCH_FL_CHIP_TYPE	(1 << 4)
 #define IC_INFO(lmps, hcir) \
 	.match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_HCIREV, \
 	.lmp_subver = (lmps), \
@@ -51,6 +56,7 @@ struct id_table {
 	__u16 hci_rev;
 	__u8 hci_ver;
 	__u8 hci_bus;
 +	__u8 chip_type;
 	bool config_needed;
 	bool has_rom_version;
 	char *fw_name;
@@ -98,6 +104,39 @@ static const struct id_table ic_id_table[] = {
 	  .fw_name  = "rtl_bt/rtl8723b_fw.bin",
 	  .cfg_name = "rtl_bt/rtl8723b_config" },
 +	/* 8723CS-CG */
 +	{ .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_CHIP_TYPE |
 +			 IC_MATCH_FL_HCIBUS,
 +	  .lmp_subver = RTL_ROM_LMP_8703B,
 +	  .chip_type = RTL_CHIP_8723CS_CG,
 +	  .hci_bus = HCI_UART,
 +	  .config_needed = true,
 +	  .has_rom_version = true,
 +	  .fw_name  = "rtl_bt/rtl8723cs_cg_fw.bin",
 +	  .cfg_name = "rtl_bt/rtl8723cs_cg_config" },
 +
 +	/* 8723CS-VF */
 +	{ .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_CHIP_TYPE |
 +			 IC_MATCH_FL_HCIBUS,
 +	  .lmp_subver = RTL_ROM_LMP_8703B,
 +	  .chip_type = RTL_CHIP_8723CS_VF,
 +	  .hci_bus = HCI_UART,
 +	  .config_needed = true,
 +	  .has_rom_version = true,
 +	  .fw_name  = "rtl_bt/rtl8723cs_vf_fw.bin",
 +	  .cfg_name = "rtl_bt/rtl8723cs_vf_config" },
 +
 +	/* 8723CS-XX */
 +	{ .match_flags = IC_MATCH_FL_LMPSUBV | IC_MATCH_FL_CHIP_TYPE |
 +			 IC_MATCH_FL_HCIBUS,
 +	  .lmp_subver = RTL_ROM_LMP_8703B,
 +	  .chip_type = RTL_CHIP_8723CS_XX,
 +	  .hci_bus = HCI_UART,
 +	  .config_needed = true,
 +	  .has_rom_version = true,
 +	  .fw_name  = "rtl_bt/rtl8723cs_xx_fw.bin",
 +	  .cfg_name = "rtl_bt/rtl8723cs_xx_config" },
 +
 	/* 8723D */
 	{ IC_INFO(RTL_ROM_LMP_8723B, 0xd),
 	  .config_needed = true,
@@ -147,7 +186,8 @@ static const struct id_table ic_id_table[] = {
 	};
 static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev,
 -					     u8 hci_ver, u8 hci_bus)
 +					     u8 hci_ver, u8 hci_bus,
 +					     u8 chip_type)
 {
 	int i;
@@ -164,6 +204,9 @@ static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev,
 		if ((ic_id_table[i].match_flags & IC_MATCH_FL_HCIBUS) &&
 		    (ic_id_table[i].hci_bus != hci_bus))
 			continue;
 +		if ((ic_id_table[i].match_flags & IC_MATCH_FL_CHIP_TYPE) &&
 +		    (ic_id_table[i].chip_type != chip_type))
 +			continue;
 		break;
 	}
@@ -225,6 +268,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev,
 		{ RTL_ROM_LMP_8723B, 1 },
 		{ RTL_ROM_LMP_8821A, 2 },
 		{ RTL_ROM_LMP_8761A, 3 },
 +		{ RTL_ROM_LMP_8703B, 7 },
 		{ RTL_ROM_LMP_8822B, 8 },
 		{ RTL_ROM_LMP_8723B, 9 },	/* 8723D */
 		{ RTL_ROM_LMP_8821A, 10 },	/* 8821C */
@@ -499,6 +543,48 @@ static struct sk_buff *btrtl_read_local_version(struct hci_dev *hdev)
 	return skb;
 }
 +static bool rtl_has_chip_type(u16 lmp_subver)
 +{
 +	switch (lmp_subver) {
 +	case RTL_ROM_LMP_8703B:
 +		return true;
 +	default:
 +		break;
 +	}
 +
 +	return  false;
 +}
 +
 +static int rtl_read_chip_type(struct hci_dev *hdev, u8 *type)
 +{
 +	struct rtl_chip_type_evt *chip_type;
 +	struct sk_buff *skb;
 +	const unsigned char cmd_buf[] = {0x00, 0x94, 0xa0, 0x00, 0xb0};
 +
 +	/* Read RTL chip type command */
 +	skb = __hci_cmd_sync(hdev, 0xfc61, 5, cmd_buf, HCI_INIT_TIMEOUT);
 +	if (IS_ERR(skb)) {
 +		rtl_dev_err(hdev, "Read chip type failed (%ld)",
 +			    PTR_ERR(skb));
 +		return PTR_ERR(skb);
 +	}
 +
 +	if (skb->len != sizeof(*chip_type)) {
 +		rtl_dev_err(hdev, "RTL chip type event length mismatch");
 +		kfree_skb(skb);
 +		return -EIO;
 +	}
 +
 +	chip_type = (struct rtl_chip_type_evt *)skb->data;
 +	rtl_dev_info(hdev, "chip_type status=%x type=%x",
 +		     chip_type->status, chip_type->type);
 +
 +	*type = chip_type->type & 0x0f;
 +
 +	kfree_skb(skb);
 +	return 0;
 +}
 +
 void btrtl_free(struct btrtl_device_info *btrtl_dev)
 {
 	kfree(btrtl_dev->fw_data);
@@ -515,7 +601,7 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
 	struct hci_rp_read_local_version *resp;
 	char cfg_name[40];
 	u16 hci_rev, lmp_subver;
 -	u8 hci_ver;
 +	u8 hci_ver, chip_type = 0;
 	int ret;
 	btrtl_dev = kzalloc(sizeof(*btrtl_dev), GFP_KERNEL);
@@ -540,8 +626,14 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev,
 	lmp_subver = le16_to_cpu(resp->lmp_subver);
 	kfree_skb(skb);
 +	if (rtl_has_chip_type(lmp_subver)) {
 +		ret = rtl_read_chip_type(hdev, &chip_type);
 +		if (ret)
 +			goto err_free;
 +	}
 +
 	btrtl_dev->ic_info = btrtl_match_ic(lmp_subver, hci_rev, hci_ver,
 -					    hdev->bus);
 +					    hdev->bus, chip_type);
 	if (!btrtl_dev->ic_info) {
 		rtl_dev_err(hdev, "rtl: unknown IC info, lmp subver %04x, hci rev %04x, hci ver %04x",
@@ -610,6 +702,7 @@ int btrtl_download_firmware(struct hci_dev *hdev,
 	case RTL_ROM_LMP_8821A:
 	case RTL_ROM_LMP_8761A:
 	case RTL_ROM_LMP_8822B:
 +	case RTL_ROM_LMP_8703B:
 		return btrtl_setup_rtl8723b(hdev, btrtl_dev);
 	default:
 		rtl_dev_info(hdev, "rtl: assuming no firmware upload needed\n");
@@ -628,7 +721,12 @@ int btrtl_setup_realtek(struct hci_dev *hdev)
 		return PTR_ERR(btrtl_dev);
 	ret = btrtl_download_firmware(hdev, btrtl_dev);
 +	if (ret)
 +		goto out_free;
 +	btrtl_apply_quirks(hdev, btrtl_dev);
 +
 +out_free:
 	btrtl_free(btrtl_dev);
 	return ret;
@@ -743,6 +841,24 @@ int btrtl_get_uart_settings(struct hci_dev *hdev,
 }
 EXPORT_SYMBOL_GPL(btrtl_get_uart_settings);
 +void btrtl_apply_quirks(struct hci_dev *hdev,
 +			struct btrtl_device_info *btrtl_dev)
 +{
 +	switch (btrtl_dev->ic_info->lmp_subver) {
 +	case RTL_ROM_LMP_8703B:
 +		/* 8723CS reports two pages for local ext features,
 +		 * but it doesn't support any features from page 2 -
 +		 * it either responds with garbage or with error status
 +		 */
 +		set_bit(HCI_QUIRK_BROKEN_LOCAL_EXT_FTR_MAX_PAGE,
 +			&hdev->quirks);
 +		break;
 +	default:
 +		break;
 +	}
 +}
 +EXPORT_SYMBOL_GPL(btrtl_apply_quirks);
 +
 MODULE_AUTHOR("Daniel Drake <drake@endlessm.com>");
 MODULE_DESCRIPTION("Bluetooth support for Realtek devices ver " VERSION);
 MODULE_VERSION(VERSION);
@@ -752,6 +868,12 @@ MODULE_FIRMWARE("rtl_bt/rtl8723b_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8723b_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8723bs_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8723bs_config.bin");
 +MODULE_FIRMWARE("rtl_bt/rtl8723cs_cg_fw.bin");
 +MODULE_FIRMWARE("rtl_bt/rtl8723cs_cg_config.bin");
 +MODULE_FIRMWARE("rtl_bt/rtl8723cs_vf_fw.bin");
 +MODULE_FIRMWARE("rtl_bt/rtl8723cs_vf_config.bin");
 +MODULE_FIRMWARE("rtl_bt/rtl8723cs_xx_fw.bin");
 +MODULE_FIRMWARE("rtl_bt/rtl8723cs_xx_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8723ds_fw.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8723ds_config.bin");
 MODULE_FIRMWARE("rtl_bt/rtl8761a_fw.bin");
 diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h
 index f5e36f3993a8..db4e4a1542b7 100644
 --- a/drivers/bluetooth/btrtl.h
 +++ b/drivers/bluetooth/btrtl.h
@@ -24,6 +24,11 @@
 struct btrtl_device_info;
 +struct rtl_chip_type_evt {
 +	__u8 status;
 +	__u8 type;
 +} __packed;
 +
 struct rtl_download_cmd {
 	__u8 index;
 	__u8 data[RTL_FRAG_LEN];
@@ -69,6 +74,8 @@ int btrtl_get_uart_settings(struct hci_dev *hdev,
 			    struct btrtl_device_info *btrtl_dev,
 			    unsigned int *controller_baudrate,
 			    u32 *device_baudrate, bool *flow_control);
 +void btrtl_apply_quirks(struct hci_dev *hdev,
 +			struct btrtl_device_info *btrtl_dev);
 #else
@@ -100,6 +107,11 @@ static inline int btrtl_get_uart_settings(struct hci_dev *hdev,
 					  bool *flow_control)
 {
 	return -ENOENT;
 +
 +static inline void btrtl_apply_quirks(struct hci_dev *hdev,
 +			struct btrtl_device_info *btrtl_dev)
 +{
 +}
 }
 #endif
 diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
 index 9cc10e299fa8..7d72e092ce9d 100644
 --- a/drivers/bluetooth/hci_h5.c
 +++ b/drivers/bluetooth/hci_h5.c
@@ -892,6 +892,10 @@ static int h5_btrtl_setup(struct h5 *h5)
 	err = btrtl_download_firmware(h5->hu->hdev, btrtl_dev);
 	/* Give the device some time before the hci-core sends it a reset */
 	usleep_range(10000, 20000);
 +	if (err)
 +		goto out_free;
 +
 +	btrtl_apply_quirks(h5->hu->hdev, btrtl_dev);
 out_free:
 	btrtl_free(btrtl_dev);
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0144-arm64-allwinner-a64-enable-Bluetooth-On-Pinebook.patch
+++ b/patch/kernel/sunxi-dev/0144-arm64-allwinner-a64-enable-Bluetooth-On-Pinebook.patch
@ -0,0 +1,44 @@
 From 26b3d6f8ffa77cb05066c11967a498d6dacbdc42 Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Wed, 31 Oct 2018 20:43:26 -0700
 Subject: [PATCH 144/146] arm64: allwinner: a64: enable Bluetooth On Pinebook
 Pinebook has an RTL8723CS WiFi + BT chip, BT is connected to UART1
 and uses PL4 as BT reset, PL5 as device wake GPIO, PL6 as host wake GPIO
 the I2C controlling signals are connected to R_I2C bus.
 Enable it in the device tree.
 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
 ---
 .../boot/dts/allwinner/sun50i-a64-pinebook.dts     | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
 index 0f788400ece0..c1e57597f76a 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts
@@ -401,6 +401,20 @@
 	status = "okay";
 };
 +&uart1 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
 +	status = "okay";
 +
 +	bluetooth {
 +		compatible = "realtek,rtl8723cs-bt";
 +		reset-gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
 +		device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
 +		host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
 +		firmware-postfix = "pinebook";
 +	};
 +};
 +
 &usb_otg {
 	dr_mode = "host";
 };
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0145-arm64-allwinner-a64-enable-Bluetooth-On-Pine64.patch
+++ b/patch/kernel/sunxi-dev/0145-arm64-allwinner-a64-enable-Bluetooth-On-Pine64.patch
@ -0,0 +1,40 @@
 From 7f24fdacc41a34b5d1a39ae81f4f39660a5b72ca Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Wed, 31 Oct 2018 20:45:16 -0700
 Subject: [PATCH 145/146] arm64: allwinner: a64: enable Bluetooth On Pine64
 Pine64 has optional RTL8723BS WiFi + BT module, BT is connected to UART1
 and uses PL4 as BT reset, PL5 as device wake GPIO, PL6 as host wake GPIO
 the I2C controlling signals are connected to R_I2C bus.
 Enable it in the device tree.
 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
 ---
 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
 index f6fc0ed2f4ec..8e55e81c3236 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -333,7 +333,15 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
 -	status = "disabled";
 +	status = "okay";
 +
 +	bluetooth {
 +		compatible = "realtek,rtl8723bs-bt";
 +		reset-gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
 +		device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
 +		host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
 +		firmware-postfix = "pine64";
 +	};
 };
 /* On Pi-2 connector */
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0146-arm64-allwinner-a64-enable-Bluetooth-On-SoPine-baseb.patch
+++ b/patch/kernel/sunxi-dev/0146-arm64-allwinner-a64-enable-Bluetooth-On-SoPine-baseb.patch
@ -0,0 +1,45 @@
 From b325cd227f2426f938a08168b5c1b40111562e9e Mon Sep 17 00:00:00 2001
 From: Vasily Khoruzhick <anarsoul@gmail.com>
 Date: Wed, 31 Oct 2018 20:50:09 -0700
 Subject: [PATCH 146/146] arm64: allwinner: a64: enable Bluetooth On SoPine
 baseboard
 SoPine has optional RTL8723BS WiFi + BT module, BT is connected to UART1
 and uses PL4 as BT reset, PL5 as device wake GPIO, PL6 as host wake GPIO
 the I2C controlling signals are connected to R_I2C bus.
 Enable it in the device tree.
 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
 ---
 .../dts/allwinner/sun50i-a64-sopine-baseboard.dts  | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
 index 9010bd58af1b..590a77769cde 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -230,6 +230,20 @@
 	status = "okay";
 };
 +&uart1 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
 +	status = "okay";
 +
 +	bluetooth {
 +		compatible = "realtek,rtl8723bs-bt";
 +		reset-gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
 +		device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
 +		host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
 +		firmware-postfix = "pine64";
 +	};
 +};
 +
 &usb_otg {
 	dr_mode = "host";
 	status = "okay";
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/0147-si2168-fix-cmd-timeout.patch
+++ b/patch/kernel/sunxi-dev/0147-si2168-fix-cmd-timeout.patch
@ -0,0 +1,28 @@
 From 2e01cc074cc426da4b390af025a736eda9aef80c Mon Sep 17 00:00:00 2001
 From: Koumes <koumes@centrum.cz>
 Date: Sat, 1 Jun 2019 21:20:26 +0000
 Subject: [PATCH] si2168: fix cmd timeout
 Some demuxer si2168 commands may take 130-140 ms.
 (DVB-T/T2 tuner MyGica T230C v2).
 Details: https://github.com/CoreELEC/CoreELEC/pull/208
 ---
 drivers/media/dvb-frontends/si2168.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
 diff --git a/drivers/media/dvb-frontends/si2168.c b/drivers/media/dvb-frontends/si2168.c
 index b05e6772c..ffaba6f81 100644
 --- a/drivers/media/dvb-frontends/si2168.c
 +++ b/drivers/media/dvb-frontends/si2168.c
@@ -42,7 +42,7 @@ static int si2168_cmd_execute(struct i2c_client *client, struct si2168_cmd *cmd)
 	if (cmd->rlen) {
 		/* wait cmd execution terminate */
 -		#define TIMEOUT 70
 +		#define TIMEOUT 200
 		timeout = jiffies + msecs_to_jiffies(TIMEOUT);
 		while (!time_after(jiffies, timeout)) {
 			ret = i2c_master_recv(client, cmd->args, cmd->rlen);
 -- 
 2.17.1
--- a/patch/kernel/sunxi-dev/5000-patch-4.19.9-10.patch.disabled
+++ b/patch/kernel/sunxi-dev/5000-patch-4.19.9-10.patch.disabled
--- a/patch/kernel/sunxi-dev/5001-patch-4.19.10-11.patch.disabled
+++ b/patch/kernel/sunxi-dev/5001-patch-4.19.10-11.patch.disabled
--- a/patch/kernel/sunxi-dev/ARM-dts-sun7i-Disable-OOB-IRQ-for-brcm-wifi-on-Cubietruck-and-Banana-Pro.patch
+++ b/patch/kernel/sunxi-dev/ARM-dts-sun7i-Disable-OOB-IRQ-for-brcm-wifi-on-Cubietruck-and-Banana-Pro.patch
@ -0,0 +1,90 @@
 While doing some brcmfmac driver work I needed to test this also on some
 devicetree based boards. So I fired up the good old Cubietruck and when
 that would not work a Banana Pro.
 With an unmodified 4.17 kernel both boards intermittently would come up
 with non working wifi with the following errors:
 brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
 brcmfmac: brcmf_bus_started: failed: -110
 brcmfmac: brcmf_attach: dongle is not responding: err=-110
 brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed
 They would come up this way more often then with actual working wifi,
 once this problem happens it seems to require a power-cycle to fix.
 Once things work one can safely reboot without hitting the issue.
 I've found that disabling OOB interrupts fixes this. This really is more
 of a workaround then a proper fix, but it makes the wifi reliable again
 and it does not have much of a downside.
 Using an OOB IRQ instead of the sdio-IRQ mechanism is mostly important to
 allow the MMC controller to go into runtime-suspend which is not really an
 issue on these boards since they are (usually) not battery powered.
 I've looked at recent brcmfmac and mmc-core changes which may explain this
 and I've not found anything. So the most likely culprit is the A20 external
 interrupt handling e.g. perhaps it is set to edge instead of level? Either
 way I do not have time to further investigate this.
 BugLink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=908438
 Signed-off-by: Hans de Goede <hdegoede@redhat.com>
 ---
 arch/arm/boot/dts/sun7i-a20-bananapro.dts  | 16 +++++++++++++---
 arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 16 +++++++++++++---
 2 files changed, 26 insertions(+), 6 deletions(-)
 diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
 index 0898eb6162f5..0e1ddd998b20 100644
 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
 +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -174,9 +174,19 @@
 	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 -		interrupt-parent = <&pio>;
 -		interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
 -		interrupt-names = "host-wake";
 +		/*
 +		 * OOB interrupt support is broken ATM, often the first irq
 +		 * does not get seen resulting in the drv probe failing with:
 +		 *
 +		 * brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
 +		 * brcmfmac: brcmf_bus_started: failed: -110
 +		 * brcmfmac: brcmf_attach: dongle is not responding: err=-110
 +		 * brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed
 +		 *
 +		 * interrupt-parent = <&pio>;
 +		 * interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
 +		 * interrupt-names = "host-wake";
 +		 */
 	};
 };
 diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
 index 5649161de1d7..a837516db6f9 100644
 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
 +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -222,9 +222,19 @@
 	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 -		interrupt-parent = <&pio>;
 -		interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
 -		interrupt-names = "host-wake";
 +		/*
 +		 * OOB interrupt support is broken ATM, often the first irq
 +		 * does not get seen resulting in the drv probe failing with:
 +		 *
 +		 * brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
 +		 * brcmfmac: brcmf_bus_started: failed: -110
 +		 * brcmfmac: brcmf_attach: dongle is not responding: err=-110
 +		 * brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed
 +		 *
 +		 * interrupt-parent = <&pio>;
 +		 * interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>;
 +		 * interrupt-names = "host-wake";
 +		 */
 	};
 };
--- a/patch/kernel/sunxi-dev/Revert_BT_HCIUART_RTL_ACPI_dependency.patch
+++ b/patch/kernel/sunxi-dev/Revert_BT_HCIUART_RTL_ACPI_dependency.patch
@ -0,0 +1,18 @@
 Reverts Bluetooth: Make BT_HCIUART_RTL configuration option depend on ACPI
 https://github.com/anarsoul/linux-2.6/commit/51474eff2bc2777061ab3658e014a37dc9d7a775
 otherwise it breaks the compilation
 diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
 index 845b0314c..2df11cc08 100644
 --- a/drivers/bluetooth/Kconfig
 +++ b/drivers/bluetooth/Kconfig
@@ -200,7 +200,6 @@ config BT_HCIUART_RTL
 	depends on BT_HCIUART
 	depends on BT_HCIUART_SERDEV
 	depends on GPIOLIB
 -	depends on ACPI
 	select BT_HCIUART_3WIRE
 	select BT_RTL
 	help
--- a/patch/kernel/sunxi-dev/add-BergMicro-SPI-flashes.patch
+++ b/patch/kernel/sunxi-dev/add-BergMicro-SPI-flashes.patch
@ -0,0 +1,18 @@
 diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
 index 1413828..efc9bfd 100644
 --- a/drivers/mtd/spi-nor/spi-nor.c
 +++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -935,6 +935,13 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 	{ "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
 +	/* BergMicro Flashes */
 +	{ "bg25q80", INFO(0xe04014, 0, 64 * 1024,  16, SECT_4K) },
 +	{ "bg25q16", INFO(0xe04015, 0, 64 * 1024,  32, SECT_4K) },
 +	{ "bg25q32", INFO(0xe04016, 0, 64 * 1024,  64, SECT_4K) },
 +	{ "bg25q64", INFO(0xe04017, 0, 64 * 1024, 128, SECT_4K) },
 +	{ "bg25q128", INFO(0xe04018, 0, 64 * 1024, 256, SECT_4K) },
 +
 	/* EON -- en25xxx */
 	{ "en25f32",    INFO(0x1c3116, 0, 64 * 1024,   64, SECT_4K) },
 	{ "en25p32",    INFO(0x1c2016, 0, 64 * 1024,   64, 0) },
--- a/patch/kernel/sunxi-dev/add-h5-emmc-compatible.patch
+++ b/patch/kernel/sunxi-dev/add-h5-emmc-compatible.patch
@ -0,0 +1,26 @@
 diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
 index bba98d8..6087fdb 100644
 --- a/drivers/mmc/host/sunxi-mmc.c
 +++ b/drivers/mmc/host/sunxi-mmc.c
@@ -1180,6 +1180,13 @@ static const struct sunxi_mmc_cfg sun50i_a64_emmc_cfg = {
 	.needs_new_timings = true,
 };
 +static const struct sunxi_mmc_cfg sun50i_h5_emmc_cfg = {
 +	.idma_des_size_bits = 13,
 +	.clk_delays = NULL,
 +	.can_calibrate = true,
 +	.needs_new_timings = false,
 +};
 +
 static const struct of_device_id sunxi_mmc_of_match[] = {
 	{ .compatible = "allwinner,sun4i-a10-mmc", .data = &sun4i_a10_cfg },
 	{ .compatible = "allwinner,sun5i-a13-mmc", .data = &sun5i_a13_cfg },
@@ -1188,6 +1195,7 @@ static const struct of_device_id sunxi_mmc_of_match[] = {
 	{ .compatible = "allwinner,sun9i-a80-mmc", .data = &sun9i_a80_cfg },
 	{ .compatible = "allwinner,sun50i-a64-mmc", .data = &sun50i_a64_cfg },
 	{ .compatible = "allwinner,sun50i-a64-emmc", .data = &sun50i_a64_emmc_cfg },
 +	{ .compatible = "allwinner,sun50i-h5-emmc", .data = &sun50i_h5_emmc_cfg },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sunxi_mmc_of_match);
--- a/patch/kernel/sunxi-dev/add-nanopi-npi-stuff.patch
+++ b/patch/kernel/sunxi-dev/add-nanopi-npi-stuff.patch
@ -0,0 +1,48 @@
 diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
 index 4df29a6..cf59d3f 100644
 --- a/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
 +++ b/arch/arm/boot/dts/sun8i-h3-nanopi.dtsi
@@ -59,6 +63,8 @@
 	leds {
 		compatible = "gpio-leds";
 +		pinctrl-names = "default";
 +		pinctrl-0 = <&leds_npi>, <&leds_r_npi>;
 		status {
 			label = "nanopi:blue:status";
@@ -76,6 +82,8 @@
 	r_gpio_keys {
 		compatible = "gpio-keys";
 		input-name = "k1";
 +		pinctrl-names = "default";
 +		pinctrl-0 = <&sw_r_npi>;
 		k1 {
 			label = "k1";
@@ -100,6 +136,25 @@
 	status = "okay";
 };
 +&pio {
 +	leds_npi: led_pins {
 +		pins = "PA10";
 +		function = "gpio_out";
 +	};
 +};
 +
 +&r_pio {
 +	leds_r_npi: led_pins {
 +		pins = "PL10";
 +		function = "gpio_out";
 +	};
 +
 +	sw_r_npi: key_pins {
 +		pins = "PL3";
 +		function = "gpio_in";
 +	};
 +};
 +
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pa_pins>;
--- a/patch/kernel/sunxi-dev/add-orangepi-zeroplus2.patch
+++ b/patch/kernel/sunxi-dev/add-orangepi-zeroplus2.patch
@ -0,0 +1,123 @@
 diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
 index b8f46e2..24cb8b9 100644
 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
 +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
@@ -53,12 +53,29 @@
 	aliases {
 		serial0 = &uart0;
 +		ethernet1 = &brcmf;
 	};
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 +	leds {
 +		compatible = "gpio-leds";
 +
 +		pwr_led {
 +			label = "orangepi:green:pwr";
 +			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
 +			default-state = "on";
 +		};
 +
 +		status_led {
 +			label = "orangepi:red:status";
 +			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
 +			linux,default-trigger = "heartbeat";
 +		};
 +	};
 +
 	connector {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -88,6 +105,11 @@
 	status = "okay";
 };
 +&ehci0 {
 +	status = "okay";
 +};
 +
 +
 &hdmi {
 	status = "okay";
 };
@@ -98,6 +120,22 @@
 	};
 };
 +&sound_hdmi {
 +	status = "okay";
 +};
 +
 +&i2s2 {
 +	status = "okay";
 +};
 +
 +&mixer0 {
 +	status = "okay";
 +};
 +
 +&tcon0 {
 +	status = "okay";
 +};
 +
 &mmc0 {
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
@@ -132,8 +170,53 @@
 	status = "okay";
 };
 +&pio {
 +	bt_pwr_pin: bt_pwr_pin@0 {
 +		pins = "PA10";
 +		function = "gpio_out";
 +	};
 +};
 +
 +&ohci0 {
 +	status = "okay";
 +};
 +
 +&spi0 {
 +	/* Disable SPI NOR by default: it optional on Orange Pi Zero boards */
 +	status = "disabled";
 +
 +	flash@0 {
 +		#address-cells = <1>;
 +		#size-cells = <1>;
 +		compatible = "mxicy,mx25l1606e", "winbond,w25q128";
 +		reg = <0>;
 +		spi-max-frequency = <40000000>;
 +	};
 +};
 +
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pa_pins>;
 	status = "okay";
 };
 +
 +&uart1 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
 +	status = "okay";
 +};
 +
 +&usb_otg {
 +	dr_mode = "peripheral";
 +	status = "okay";
 +};
 +
 +&usbphy {
 +	/*
 +	 * USB Type-A port VBUS is always on. However, MicroUSB VBUS can only
 +	 * power up the board; when it's used as OTG port, this VBUS is
 +	 * always off even if the board is powered via GPIO pins.
 +	 */
 +	status = "okay";
 +	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
 +};
--- a/patch/kernel/sunxi-dev/board-a64-v3-15-19-arm64-dts-allwinner-a64-Olinuxino-enable-USB.patch
+++ b/patch/kernel/sunxi-dev/board-a64-v3-15-19-arm64-dts-allwinner-a64-Olinuxino-enable-USB.patch
@ -0,0 +1,80 @@
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
 index 26075b9a76e3..a1c2f06ed474 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -77,6 +77,17 @@
 		regulator-max-microvolt = <3300000>;
 	};
 +	reg_usb1_vbus: usb1-vbus {
 +		compatible = "regulator-fixed";
 +		regulator-name = "usb1-vbus";
 +		regulator-min-microvolt = <5000000>;
 +		regulator-max-microvolt = <5000000>;
 +		regulator-boot-on;
 +		enable-active-high;
 +		gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */
 +		status = "okay";
 +	};
 +	
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
@@ -98,6 +109,14 @@
 	};
 };
 +&ehci0 {
 +	status = "okay";
 +};
 +
 +&ehci1 {
 +	status = "okay";
 +};
 +
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
@@ -109,6 +128,14 @@
 	};
 };
 +&ohci0 {
 +	status = "okay";
 +};
 +
 +&ohci1 {
 +	status = "okay";
 +};
 +
 &r_rsb {
 	status = "okay";
@@ -201,6 +229,11 @@
 	regulator-name = "vcc-wifi-io";
 };
 +&reg_drivevbus {
 +	regulator-name = "usb0-vbus";
 +	status = "okay";
 +};
 +
 &reg_eldo1 {
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
@@ -244,3 +277,15 @@
 	pinctrl-0 = <&uart0_pins_a>;
 	status = "okay";
 };
 +
 +&usb_otg {
 +	dr_mode = "otg";
 +	status = "okay";
 +};
 +
 +&usbphy {
 +	status = "okay";
 +	usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
 +	usb0_vbus-supply = <&reg_drivevbus>;
 +	usb1_vbus-supply = <&reg_usb1_vbus>;
 +};
--- a/patch/kernel/sunxi-dev/board-a64-v3-18-19-arm64-dts-allwinner-a64-NanoPi-A64-Add-Wifi-chip.patch
+++ b/patch/kernel/sunxi-dev/board-a64-v3-18-19-arm64-dts-allwinner-a64-NanoPi-A64-Add-Wifi-chip.patch
@ -0,0 +1,41 @@
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
 index 1eba1324e5b9..5e3dc2666d0f 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -58,6 +58,11 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 +
 +	wifi_pwrseq: wifi_pwrseq {
 +		compatible = "mmc-pwrseq-simple";
 +		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
 +	};
 };
 &ehci0 {
@@ -105,6 +110,24 @@
 	status = "okay";
 };
 +&mmc1 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&mmc1_pins>;
 +	vmmc-supply = <&reg_dcdc1>;
 +	vqmmc-supply = <&reg_dldo4>;
 +	mmc-pwrseq = <&wifi_pwrseq>;
 +	bus-width = <4>;
 +	non-removable;
 +	status = "okay";
 +
 +	rtl8189etv: wifi@1 {
 +		reg = <1>;
 +		interrupt-parent = <&r_pio>;
 +		interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
 +		interrupt-names = "host-wake";
 +	};
 +};
 +
 &ohci0 {
 	status = "okay";
 };
--- a/patch/kernel/sunxi-dev/board-a64-v3-19-19-arm64-dts-allwinner-a64-NanoPi-A64-Add-blue-status-LED.patch
+++ b/patch/kernel/sunxi-dev/board-a64-v3-19-19-arm64-dts-allwinner-a64-NanoPi-A64-Add-blue-status-LED.patch
@ -0,0 +1,20 @@
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
 index 5e3dc2666d0f..feb8c7e51623 100644
 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -59,6 +59,15 @@
 		stdout-path = "serial0:115200n8";
 	};
 +	leds {
 +		compatible = "gpio-leds";
 +
 +		blue {
 +			label = "nanopi-a64:blue:status";
 +			gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
 +		};
 +	};
 +
 	wifi_pwrseq: wifi_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
--- a/patch/kernel/sunxi-dev/board-a83t-v7-3-4-ARM-dts-sun8i-a83t-bananapi-m3-Enable-IR-controller.patch
+++ b/patch/kernel/sunxi-dev/board-a83t-v7-3-4-ARM-dts-sun8i-a83t-bananapi-m3-Enable-IR-controller.patch
@ -0,0 +1,16 @@
 diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
 index 3b579d7567c8..ea23ff821166 100644
 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
 +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts
@@ -183,6 +183,11 @@
 	status = "okay";
 };
 +&r_cir {
 +	clock-frequency = <3000000>;
 +	status = "okay";
 +};
 +
 &r_rsb {
 	status = "okay";
--- a/patch/kernel/sunxi-dev/board-cubieboard-cubietruck-green-LED-mmc0.patch
+++ b/patch/kernel/sunxi-dev/board-cubieboard-cubietruck-green-LED-mmc0.patch
@ -0,0 +1,25 @@
 diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
 index 710e2ef..ffe7625 100644
 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
 +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -73,7 +73,7 @@
 		green {
 			label = "cubieboard:green:usr";
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */
 -			linux,default-trigger = "heartbeat";
 +			linux,default-trigger = "mmc0";
 		};
 	};
 };
 diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
 index 8da939a..934655f 100644
 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
 +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -85,6 +85,7 @@
 		green {
 			label = "cubietruck:green:usr";
 			gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
 +			linux,default-trigger = "mmc0";
 		};
 	};
--- a/patch/kernel/sunxi-dev/board-cubietruck-enable-uart2.patch
+++ b/patch/kernel/sunxi-dev/board-cubietruck-enable-uart2.patch
@ -0,0 +1,25 @@
 diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
 index 8da939a..42fd205 100644
 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
 +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -56,6 +56,7 @@
 	aliases {
 		serial0 = &uart0;
 +		serial2 = &uart2;
 	};
 	chosen {
@@ -307,6 +308,12 @@
 	status = "okay";
 };
 +&uart2 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&uart2_cts_rts_pi_pins>, <&uart2_pi_pins>;
 +	status = "okay";
 +};
 +
 &usb_otg {
 	dr_mode = "otg";
 	status = "okay";
--- a/patch/kernel/sunxi-dev/board-cubietruckplus-enable-hdmi.patch-disabled
+++ b/patch/kernel/sunxi-dev/board-cubietruckplus-enable-hdmi.patch-disabled
@ -0,0 +1,50 @@
 diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
 index 88decb07..e3292916 100644
 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
 +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -60,6 +60,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 +	connector {
 +		compatible = "hdmi-connector";
 +		type = "a";
 +
 +		port {
 +			hdmi_con_in: endpoint {
 +				remote-endpoint = <&hdmi_out_con>;
 +			};
 +		};
 +	};
 +
 	leds {
 		compatible = "gpio-leds";
@@ -145,6 +155,10 @@
 	};
 };
 +&de {
 +	status = "okay";
 +};
 +
 &ehci0 {
 	/* GL830 USB-to-SATA bridge here */
 	status = "okay";
@@ -164,6 +178,16 @@
 	status = "okay";
 };
 +&hdmi {
 +	status = "okay";
 +};
 +
 +&hdmi_out {
 +	hdmi_out_con: endpoint {
 +		remote-endpoint = <&hdmi_con_in>;
 +	};
 +};
 +
 &mdio {
 	rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
--- a/patch/kernel/sunxi-dev/board-h2plus-nanopi-duo-add-device.patch
+++ b/patch/kernel/sunxi-dev/board-h2plus-nanopi-duo-add-device.patch
@ -0,0 +1,182 @@
 diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
 index 99cf49a..977b6ff 100644
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
@@ -1030,6 +1030,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a83t-tbs-a711.dtb \
 	sun8i-h2-plus-bananapi-m2-zero.dtb \
 	sun8i-h2-plus-libretech-all-h3-cc.dtb \
 +	sun8i-h2-plus-nanopi-duo.dtb \
 	sun8i-h2-plus-orangepi-r1.dtb \
 	sun8i-h2-plus-orangepi-zero.dtb \
 	sun8i-h2-plus-sunvell-r69.dtb \
 diff --git a/arch/arm/boot/dts/sun8i-h2-plus-nanopi-duo.dts b/arch/arm/boot/dts/sun8i-h2-plus-nanopi-duo.dts
 new file mode 100644
 index 0000000..2b31b8f
 --- /dev/null
 +++ b/arch/arm/boot/dts/sun8i-h2-plus-nanopi-duo.dts
@@ -0,0 +1,164 @@
 +/*
 + * adapted by karabek, 2018 , based on
 + *   Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
 + *   Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
 + *
 + *
 + * This file is dual-licensed: you can use it either under the terms
 + * of the GPL or the X11 license, at your option. Note that this dual
 + * licensing only applies to this file, and not this project as a
 + * whole.
 + *
 + *  a) This file is free software; you can redistribute it and/or
 + *     modify it under the terms of the GNU General Public License as
 + *     published by the Free Software Foundation; either version 2 of the
 + *     License, or (at your option) any later version.
 + *
 + *     This file is distributed in the hope that it will be useful,
 + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 + *     GNU General Public License for more details.
 + *
 + * Or, alternatively,
 + *
 + *  b) Permission is hereby granted, free of charge, to any person
 + *     obtaining a copy of this software and associated documentation
 + *     files (the "Software"), to deal in the Software without
 + *     restriction, including without limitation the rights to use,
 + *     copy, modify, merge, publish, distribute, sublicense, and/or
 + *     sell copies of the Software, and to permit persons to whom the
 + *     Software is furnished to do so, subject to the following
 + *     conditions:
 + *
 + *     The above copyright notice and this permission notice shall be
 + *     included in all copies or substantial portions of the Software.
 + *
 + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 + *     OTHER DEALINGS IN THE SOFTWARE.
 + */
 +
 +/dts-v1/;
 +#include "sun8i-h3-nanopi.dtsi"
 +#include <dt-bindings/pinctrl/sun4i-a10.h>
 +
 +/ {
 +	model = "FriendlyARM NanoPi DUO";
 +	compatible = "friendlyarm,nanopi-duo", "allwinner,sun8i-h3";
 +
 +	aliases {
 +		ethernet0 = &emac;
 +		ethernet1 = &xr819;
 +	};
 +
 +	reg_sy8113b: gpio-regulator {
 +		compatible = "regulator-gpio";
 +		regulator-name = "vdd-cpux";
 +		regulator-type = "voltage";
 +		regulator-boot-on;
 +		regulator-always-on;
 +		regulator-min-microvolt = <1100000>;
 +		regulator-max-microvolt = <1300000>;
 +		regulator-ramp-delay = <50>; 		// 50=4ms check
 +
 +		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; 	// PL6 check
 +		enable-active-high;
 +		gpios-states = <0x1>;
 +		states = <1100000 0x0
 +			  1300000 0x1>;
 +	};
 +
 +	reg_vcc_wifi: reg_vcc_wifi {
 +		compatible = "regulator-fixed";
 +		regulator-min-microvolt = <1800000>;
 +		regulator-max-microvolt = <1800000>;
 +		regulator-name = "vcc-wifi";
 +		gpio = <&r_pio 0 7 GPIO_ACTIVE_HIGH>;	// PL7 WIFI_POWER_EN
 +	        startup-delay-us = <70000>;
 +        	enable-active-high;
 +	};
 +
 +	wifi_pwrseq: wifi_pwrseq {
 +		compatible = "mmc-pwrseq-simple";
 +		pinctrl-names = "default";
 +		pinctrl-0 = <&wifi_en_npi>;
 +		reset-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>;  // PG13 WL_RESTN
 +		post-power-on-delay-ms = <200>;
 +	};
 +};
 +
 +&cpu0 {
 +	cpu-supply = <&reg_sy8113b>;
 +};
 +
 +&ehci0 {
 +	status = "okay";
 +};
 +
 +&emac {
 +	phy-handle = <&int_mii_phy>;
 +	phy-mode = "mii";
 +	allwinner,leds-active-low;
 +	status = "okay";
 +};
 +
 +&mmc1 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&mmc1_pins>;
 +	vqmmc-supply = <&reg_vcc_wifi>;
 +	vmmc-supply = <&reg_vcc3v3>;
 +	mmc-pwrseq = <&wifi_pwrseq>;
 +	bus-width = <4>;
 +	non-removable;
 +	status = "okay";
 +
 +	xr819: sdio_wifi@1 {
 +		reg = <1>;
 +		compatible = "xradio,xr819";
 +		pinctrl-names = "default";
 +		pinctrl-0 = <&wifi_wake>;
 +		interrupt-parent = <&pio>;
 +		interrupts = <6 10 IRQ_TYPE_EDGE_RISING>;
 +		interrupt-names = "host-wake";
 +	};
 +};
 +
 +&mmc1_pins {
 +	bias-pull-up;
 +};
 +
 +&ohci0 {
 +	status = "okay";
 +};
 +
 +&pio {
 +	wifi_en_npi: wifi_en_pin {
 +		pins = "PG13";
 +		function = "gpio_out";
 +	};
 +	wifi_wake: wifi_wake@0 {
 +		pins = "PG10";
 +		function = "irq";
 +		pull = <SUN4I_PINCTRL_NO_PULL>;
 +	};
 +};
 +
 +&usb_otg {
 +	dr_mode = "peripheral";
 +	status = "okay";
 +};
 +
 +&usbphy {
 +	/*
 +	 * USB Type-A port VBUS is always on. However, MicroUSB VBUS can only
 +	 * power up the board; when it's used as OTG port, this VBUS is
 +	 * always off even if the board is powered via GPIO pins.
 +	 */
 +	status = "okay";
 +	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
 +};
--- a/patch/kernel/sunxi-dev/board-h2plus-sunvell-r69-add-device.patch
+++ b/patch/kernel/sunxi-dev/board-h2plus-sunvell-r69-add-device.patch
@ -0,0 +1,233 @@
 diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
 index e3d5a6c..0d3eef6 100644
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
@@ -995,6 +995,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-h2-plus-orangepi-r1.dtb \
 	sun8i-h2-plus-bananapi-m2-zero.dtb \
 	sun8i-h2-plus-orangepi-zero.dtb \
 +	sun8i-h2-plus-sunvell-r69.dtb \
 	sun8i-h3-bananapi-m2-plus.dtb \
 	sun8i-h3-beelink-x2.dtb \
 	sun8i-h3-libretech-all-h3-cc.dtb \
 diff --git a/arch/arm/boot/dts/sun8i-h2-plus-sunvell-r69.dts b/arch/arm/boot/dts/sun8i-h2-plus-sunvell-r69.dts
 new file mode 100644
 index 0000000..1adfb0c
 --- /dev/null
 +++ b/arch/arm/boot/dts/sun8i-h2-plus-sunvell-r69.dts
@@ -0,0 +1,215 @@
 +/*
 + * Based original Sunvell R69 FEX file (2018 <github.com/karabek>)
 + *
 + * This file is dual-licensed: you can use it either under the terms
 + * of the GPL or the X11 license, at your option. Note that this dual
 + * licensing only applies to this file, and not this project as a
 + * whole.
 + *
 + *  a) This file is free software; you can redistribute it and/or
 + *     modify it under the terms of the GNU General Public License as
 + *     published by the Free Software Foundation; either version 2 of the
 + *     License, or (at your option) any later version.
 + *
 + *     This file is distributed in the hope that it will be useful,
 + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 + *     GNU General Public License for more details.
 + *
 + * Or, alternatively,
 + *
 + *  b) Permission is hereby granted, free of charge, to any person
 + *     obtaining a copy of this software and associated documentation
 + *     files (the "Software"), to deal in the Software without
 + *     restriction, including without limitation the rights to use,
 + *     copy, modify, merge, publish, distribute, sublicense, and/or
 + *     sell copies of the Software, and to permit persons to whom the
 + *     Software is furnished to do so, subject to the following
 + *     conditions:
 + *
 + *     The above copyright notice and this permission notice shall be
 + *     included in all copies or substantial portions of the Software.
 + *
 + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 + *     OTHER DEALINGS IN THE SOFTWARE.
 + */
 +
 +/dts-v1/;
 +#include "sun8i-h3.dtsi"
 +#include "sunxi-common-regulators.dtsi"
 +
 +#include <dt-bindings/gpio/gpio.h>
 +#include <dt-bindings/input/input.h>
 +#include <dt-bindings/pinctrl/sun4i-a10.h>
 +
 +/ {
 +	model = "Sunvell R69";
 +	compatible = "sunvell,sunvell-r69", "allwinner,sun8i-h2-plus";
 +
 +	aliases {
 +		serial0 = &uart0;
 +		ethernet0 = &emac;
 +		ethernet1 = &xr819;
 +	};
 +
 +	chosen {
 +		stdout-path = "serial0:115200n8";
 +	};
 +
 + 	connector {
 + 		compatible = "hdmi-connector";
 + 		type = "a";
 + 
 + 		port {
 + 			hdmi_con_in: endpoint {
 + 				remote-endpoint = <&hdmi_out_con>;
 + 			};
 + 		};
 + 	};
 +
 +	leds {
 +		compatible = "gpio-leds";
 +
 +		pwr_led {
 +			label = "sunvell-r69:blue:pwr";
 +			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
 +			linux,default-trigger = "heartbeat";
 +		};
 +
 +		status_led {
 +			label = "sunvell-r69:red:status";
 +			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
 +		};
 +	};
 +
 +	reg_vcc_wifi: reg_vcc_wifi {
 +		compatible = "regulator-fixed";
 +		regulator-min-microvolt = <3300000>;
 +		regulator-max-microvolt = <3300000>;
 +		regulator-name = "vcc-wifi";
 +		gpio = <&r_pio 0 7 GPIO_ACTIVE_HIGH>;
 +	        startup-delay-us = <70000>;
 +		enable-active-high;
 +	};
 +
 +	wifi_pwrseq: wifi_pwrseq {
 +		compatible = "mmc-pwrseq-simple";
 +		reset-gpios = <&r_pio 0 0 GPIO_ACTIVE_LOW>;
 +		post-power-on-delay-ms = <200>;
 +	};
 +};
 +
 +&de {
 +	status = "okay";
 +};
 +
 +&ehci0 {
 +	status = "okay";
 +};
 +
 +&ehci1 {
 +	status = "okay";
 +};
 +
 +&emac {
 +	phy-handle = <&int_mii_phy>;
 +	phy-mode = "mii";
 +	allwinner,leds-active-low;
 +	status = "okay";
 +};
 +
 +&hdmi {
 +	status = "okay";
 +};
 +
 +&hdmi_out {
 +	hdmi_out_con: endpoint {
 +		remote-endpoint = <&hdmi_con_in>;
 +	};
 +};
 +
 +&ir {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&r_ir_rx_pin>;
 +	status = "okay";
 +};
 +
 +&mmc0 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&mmc0_pins>;
 +	vmmc-supply = <&reg_vcc3v3>;
 +	bus-width = <4>;
 +	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
 +	cd-inverted;
 +	status = "okay";
 +};
 +
 +&mmc1_pins {
 +	bias-pull-up;
 +};
 +
 +&mmc1 {
 +	pinctrl-names = "default";
 +	/* pinctrl-0 = <&mmc1_pins>;	*/
 +	vmmc-supply = <&reg_vcc_wifi>;
 +	mmc-pwrseq = <&wifi_pwrseq>;
 +	bus-width = <4>;
 +	non-removable;
 +	status = "okay";
 +
 +	/*
 +	 * Explicitly define the sdio device, so that we can add an ethernet
 +	 * alias for it (which e.g. makes u-boot set a mac-address).
 +	 */
 +	xr819: sdio_wifi@1 {
 +		reg = <1>;
 +		compatible = "xradio,xr819";
 +		interrupt-parent = <&pio>;
 +		interrupts = <0 11 IRQ_TYPE_EDGE_RISING>;
 +		interrupt-names = "host-wake";
 +	};
 +};
 +
 +&mmc2 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&mmc2_8bit_pins>;
 +	vmmc-supply = <&reg_vcc3v3>;
 +	bus-width = <8>;
 +	non-removable;
 +	cap-mmc-hw-reset;
 +	status = "okay";
 +};
 +
 +&ohci0 {
 +	status = "okay";
 +};
 +
 +&ohci1 {
 +	status = "okay";
 +};
 +
 +&tcon0 {
 +	status = "okay";
 +};
 +
 +&uart0 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&uart0_pa_pins>;
 +	status = "okay";
 +};
 +
 +&usb_otg {
 +	dr_mode = "host";		/* host -or- peripheral */
 +	status = "okay";
 +};
 +
 +&usbphy {
 +	/* USB VBUS is always on */
 +	status = "okay";
 +};
--- a/patch/kernel/sunxi-dev/board-h3-address-some-stability-issues.patch.disabled
+++ b/patch/kernel/sunxi-dev/board-h3-address-some-stability-issues.patch.disabled
@ -0,0 +1,151 @@
 From 8477a566b36aaae77e53a9949f963ce6ebad55fe Mon Sep 17 00:00:00 2001
 From: Ondrej Jirman <megous@megous.com>
 Date: Thu, 12 Jan 2017 16:34:57 +0100
 Subject: [PATCH] clk: sunxi-ng: Set maximum M = 1 for H3 pll-cpux clock
 When using M factor greater than 1 system is experiencing
 occasional lockups.
 This change was verified to fix lockups with PLL stress
 tester available at https://github.com/megous/h3-firmware.
 Note that M factor must not be used outside the kernel
 either, so for example u-boot needs a similar patch.
 ---
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)
 diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
 index 77ed0b0ba6819..8d47742def49d 100644
 --- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
 +++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
@@ -30,15 +30,21 @@
 #include "ccu-sun8i-h3.h"
 -static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpux_clk, "pll-cpux",
 -				     "osc24M", 0x000,
 -				     8, 5,	/* N */
 -				     4, 2,	/* K */
 -				     0, 2,	/* M */
 -				     16, 2,	/* P */
 -				     BIT(31),	/* gate */
 -				     BIT(28),	/* lock */
 -				     CLK_SET_RATE_UNGATE);
 +static struct ccu_nkmp pll_cpux_clk = {
 +	.enable		= BIT(31),
 +	.lock		= BIT(28),
 +	.n		= _SUNXI_CCU_MULT(8, 5),
 +	.k		= _SUNXI_CCU_MULT(4, 2),
 +	.m		= _SUNXI_CCU_DIV_MAX(0, 2, 1),
 +	.p		= _SUNXI_CCU_DIV(16, 2),
 +	.common		= {
 +		.reg		= 0x000,
 +		.hw.init	= CLK_HW_INIT("pll-cpux",
 +					      "osc24M",
 +					      &ccu_nkmp_ops,
 +					      CLK_SET_RATE_UNGATE),
 +	},
 +};
 /*
  * The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
 From c313a0ac340bf1131d475527171764dc49901895 Mon Sep 17 00:00:00 2001
 From: Ondrej Jirman <megous@megous.com>
 Date: Wed, 5 Apr 2017 15:43:48 +0200
 Subject: [PATCH] clk: sunxi-ng: Limit pll_cpux P factor for rates > 288MHz on
 H3
 Datasheet for H3 mandates that CPUX PLL must not use postdivider
 (P factor must be 1) for clock rates above 288MHz.
 Signed-off-by: Ondrej Jirman <megous@megous.com>
 ---
 drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 1 +
 1 file changed, 1 insertion(+)
 diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
 index 8d47742def49d..7cc9467f373f2 100644
 --- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
 +++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
@@ -37,6 +37,7 @@ static struct ccu_nkmp pll_cpux_clk = {
 	.k		= _SUNXI_CCU_MULT(4, 2),
 	.m		= _SUNXI_CCU_DIV_MAX(0, 2, 1),
 	.p		= _SUNXI_CCU_DIV(16, 2),
 +	.max_rate_for_p	= 288000000,
 	.common		= {
 		.reg		= 0x000,
 		.hw.init	= CLK_HW_INIT("pll-cpux",
 From f07a20e4ce93e7e0f333f9f6e57f14fd4ab66abd Mon Sep 17 00:00:00 2001
 From: Ondrej Jirman <megous@megous.com>
 Date: Thu, 12 Jan 2017 16:37:24 +0100
 Subject: [PATCH] clk: sunxi-ng: Allow to limit the use of NKMP clock's P
 factor
 Some SoCs mandate the maximum clock rate for which the use
 of postdivider P factor is allowed. Allow to configure maximum
 clock rate.
 Signed-off-by: Ondrej Jirman <megous@megous.com>
 ---
 drivers/clk/sunxi-ng/ccu_nkmp.c | 13 ++++++++-----
 drivers/clk/sunxi-ng/ccu_nkmp.h |  1 +
 2 files changed, 9 insertions(+), 5 deletions(-)
 diff --git a/drivers/clk/sunxi-ng/ccu_nkmp.c b/drivers/clk/sunxi-ng/ccu_nkmp.c
 index ebd9436d2c7cd..96dbc543b2cbc 100644
 --- a/drivers/clk/sunxi-ng/ccu_nkmp.c
 +++ b/drivers/clk/sunxi-ng/ccu_nkmp.c
@@ -33,16 +33,19 @@ static unsigned long ccu_nkmp_calc_rate(unsigned long parent,
 }
 static void ccu_nkmp_find_best(unsigned long parent, unsigned long rate,
 -			       struct _ccu_nkmp *nkmp)
 +			       struct _ccu_nkmp *nkmp, struct ccu_nkmp *_nkmp)
 {
 	unsigned long best_rate = 0;
 	unsigned long best_n = 0, best_k = 0, best_m = 0, best_p = 0;
 -	unsigned long _n, _k, _m, _p;
 +	unsigned long _n, _k, _m, _p, _max_p;
 +
 +	_max_p = (_nkmp->max_rate_for_p == 0 || rate <= _nkmp->max_rate_for_p) ?
 +		nkmp->max_p : nkmp->min_p;
 	for (_k = nkmp->min_k; _k <= nkmp->max_k; _k++) {
 		for (_n = nkmp->min_n; _n <= nkmp->max_n; _n++) {
 			for (_m = nkmp->min_m; _m <= nkmp->max_m; _m++) {
 -				for (_p = nkmp->min_p; _p <= nkmp->max_p; _p <<= 1) {
 +				for (_p = nkmp->min_p; _p <= _max_p; _p <<= 1) {
 					unsigned long tmp_rate;
 					tmp_rate = ccu_nkmp_calc_rate(parent,
@@ -146,7 +149,7 @@ static long ccu_nkmp_round_rate(struct clk_hw *hw, unsigned long rate,
 	_nkmp.min_p = 1;
 	_nkmp.max_p = nkmp->p.max ?: 1 << ((1 << nkmp->p.width) - 1);
 -	ccu_nkmp_find_best(*parent_rate, rate, &_nkmp);
 +	ccu_nkmp_find_best(*parent_rate, rate, &_nkmp, nkmp);
 	rate = ccu_nkmp_calc_rate(*parent_rate, _nkmp.n, _nkmp.k,
 				  _nkmp.m, _nkmp.p);
@@ -177,7 +180,7 @@ static int ccu_nkmp_set_rate(struct clk_hw *hw, unsigned long rate,
 	_nkmp.min_p = 1;
 	_nkmp.max_p = nkmp->p.max ?: 1 << ((1 << nkmp->p.width) - 1);
 -	ccu_nkmp_find_best(parent_rate, rate, &_nkmp);
 +	ccu_nkmp_find_best(parent_rate, rate, &_nkmp, nkmp);
 	n_mask = GENMASK(nkmp->n.width + nkmp->n.shift - 1, nkmp->n.shift);
 	k_mask = GENMASK(nkmp->k.width + nkmp->k.shift - 1, nkmp->k.shift);
 diff --git a/drivers/clk/sunxi-ng/ccu_nkmp.h b/drivers/clk/sunxi-ng/ccu_nkmp.h
 index 6940503e7fc46..bbea3e5ed6fba 100644
 --- a/drivers/clk/sunxi-ng/ccu_nkmp.h
 +++ b/drivers/clk/sunxi-ng/ccu_nkmp.h
@@ -33,6 +33,7 @@ struct ccu_nkmp {
 	struct ccu_mult_internal	k;
 	struct ccu_div_internal		m;
 	struct ccu_div_internal		p;
 +	unsigned long max_rate_for_p;
 	unsigned int		fixed_post_div;
--- a/patch/kernel/sunxi-dev/board-h3-nanopi-neo-core-add-emmc.patch
+++ b/patch/kernel/sunxi-dev/board-h3-nanopi-neo-core-add-emmc.patch
@ -0,0 +1,28 @@
 diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
 index 9f33f6fae..561182a9f 100644
 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
 +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
@@ -47,6 +47,23 @@
 	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
 };
 +&mmc2 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&mmc2_8bit_pins>;
 +	vmmc-supply = <&reg_vcc3v3>;
 +	bus-width = <8>;
 +	non-removable;
 +	cap-mmc-hw-reset;
 +	status = "okay";
 +};
 +
 +&mmc2_8bit_pins {
 +	/* Increase drive strength for DDR modes */
 +	drive-strength = <40>;
 +	/* eMMC is missing pull-ups */
 +	bias-pull-up;
 +};
 +
 &ehci0 {
 	status = "okay";
 };
--- a/patch/kernel/sunxi-dev/board-h5-add-0000-nanopi-k1plus.patch
+++ b/patch/kernel/sunxi-dev/board-h5-add-0000-nanopi-k1plus.patch
@ -0,0 +1,397 @@
 From ba9ba2949e86b5a00b0ae89b5e298b4cd46118ee Mon Sep 17 00:00:00 2001
 From: wuweidong <625769020@qq.com>
 Date: Mon, 27 Nov 2017 10:23:51 +0800
 Subject: [PATCH] arm64: dts: sun50i-h5-nanopi: Add a new board NanoPi K1 Plus
 ---
 arch/arm64/boot/dts/allwinner/Makefile        |   1 +
 .../allwinner/sun50i-h5-nanopi-k1-plus.dts    | 555 ++++++++++++++++++
 2 files changed, 556 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-k1-plus.dts
 diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
 index c03224962034..eb4494332002 100644
 --- a/arch/arm64/boot/dts/allwinner/Makefile
 +++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
 +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-k1-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-k1-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-k1-plus.dts
 new file mode 100644
 index 000000000000..52337a18721f
 --- /dev/null
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-k1-plus.dts
@@ -0,0 +1,367 @@
 +/*
 + * Copyright (C) 2016 ARM Ltd.
 + *
 + * This file is dual-licensed: you can use it either under the terms
 + * of the GPL or the X11 license, at your option. Note that this dual
 + * licensing only applies to this file, and not this project as a
 + * whole.
 + *
 + *  a) This file is free software; you can redistribute it and/or
 + *     modify it under the terms of the GNU General Public License as
 + *     published by the Free Software Foundation; either version 2 of the
 + *     License, or (at your option) any later version.
 + *
 + *     This file is distributed in the hope that it will be useful,
 + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 + *     GNU General Public License for more details.
 + *
 + * Or, alternatively,
 + *
 + *  b) Permission is hereby granted, free of charge, to any person
 + *     obtaining a copy of this software and associated documentation
 + *     files (the "Software"), to deal in the Software without
 + *     restriction, including without limitation the rights to use,
 + *     copy, modify, merge, publish, distribute, sublicense, and/or
 + *     sell copies of the Software, and to permit persons to whom the
 + *     Software is furnished to do so, subject to the following
 + *     conditions:
 + *
 + *     The above copyright notice and this permission notice shall be
 + *     included in all copies or substantial portions of the Software.
 + *
 + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 + *     OTHER DEALINGS IN THE SOFTWARE.
 + */
 +
 +/dts-v1/;
 +#include "sun50i-h5.dtsi"
 +
 +#include <dt-bindings/gpio/gpio.h>
 +#include <dt-bindings/input/input.h>
 +#include <dt-bindings/pinctrl/sun4i-a10.h>
 +
 +/ {
 +	model = "FriendlyElec NanoPi K1 Plus";
 +	compatible = "friendlyelec,nanopi-k1-plus", "allwinner,sun50i-h5";
 +
 +	reg_vcc3v3: vcc3v3 {
 +		compatible = "regulator-fixed";
 +		regulator-name = "vcc3v3";
 +		regulator-min-microvolt = <3300000>;
 +		regulator-max-microvolt = <3300000>;
 +	};
 +
 +	aliases {
 +		ethernet0 = &emac;
 +		serial0 = &uart0;
 +	};
 +
 +	chosen {
 +		stdout-path = "serial0:115200n8";
 +	};
 +
 +	connector {
 +		compatible = "hdmi-connector";
 +		type = "a";
 +
 +		port {
 +			hdmi_con_in: endpoint {
 +				remote-endpoint = <&hdmi_out_con>;
 +			};
 +		};
 +	};
 +
 +	leds {
 +		compatible = "gpio-leds";
 +
 +		status {
 +			label = "nanopi:green:status";
 +			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
 +			linux,default-trigger = "heartbeat";
 +			};
 +		pwr {
 +			label = "nanopi:red:pwr";
 +			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
 +			default-state = "on";
 +		};
 +
 +	};
 +
 +	r-gpio-keys {
 +		compatible = "gpio-keys";
 +
 +		sw4 {
 +			label = "sw4";
 +			linux,code = <BTN_0>;
 +			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
 +		};
 +	};
 +
 +	reg_gmac_3v3: gmac-3v3 {
 +		compatible = "regulator-fixed";
 +		pinctrl-names = "default";
 +		pinctrl-0 = <&gmac_power_pin_nanopi>;
 +		regulator-name = "gmac-3v3";
 +		regulator-min-microvolt = <3300000>;
 +		regulator-max-microvolt = <3300000>;
 +		startup-delay-us = <100000>;
 +		enable-active-high;
 +		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
 +	};
 +
 +	reg_usb0_vbus: usb0-vbus {
 +		compatible = "regulator-fixed";
 +		regulator-name = "usb0-vbus";
 +		regulator-min-microvolt = <5000000>;
 +		regulator-max-microvolt = <5000000>;
 +		enable-active-high;
 +		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
 +		status = "okay";
 +	};
 +
 +	wifi_pwrseq: wifi_pwrseq {
 +        compatible = "mmc-pwrseq-simple";
 +        pinctrl-names = "default";
 +        pinctrl-0 = <&wifi_en_npi>;
 +        reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 +        post-power-on-delay-ms = <200>;
 +    };
 +
 +	rfkill_bt {
 +		compatible = "rfkill-gpio";
 +		pinctrl-names = "default";
 +		pinctrl-0 = <&bt_pwr_pin>;
 +		reset-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
 +		clocks = <&osc32k>;
 +		clock-frequency = <32768>;
 +		rfkill-name = "sunxi-bt";
 +		rfkill-type = "bluetooth";
 +	};
 +
 +	pcm5102a: pcm5102a-codec {
 +        #sound-dai-cells = <0>;
 +        compatible = "ti,pcm5102a";
 +        status = "disabled";
 +    };
 +};
 +
 +&codec {
 +	allwinner,audio-routing =
 +		"Line Out", "LINEOUT",
 +		"MIC1", "Mic",
 +		"Mic",  "MBIAS";
 +	status = "okay";
 +};
 +
 +&de {
 +	status = "okay";
 +};
 +
 +&ehci0 {
 +	status = "okay";
 +};
 +
 +&ehci1 {
 +	status = "okay";
 +};
 +
 +&ehci2 {
 +	status = "okay";
 +};
 +
 +&ehci3 {
 +	status = "okay";
 +};
 +
 +&external_mdio {
 +	ext_rgmii_phy: ethernet-phy@1 {
 +		compatible = "ethernet-phy-ieee802.3-c22";
 +		reg = <0>;
 +	};
 +};
 +
 +&emac {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&emac_rgmii_pins>;
 +	phy-supply = <&reg_gmac_3v3>;
 +	phy-handle = <&ext_rgmii_phy>;
 +	phy-mode = "rgmii";
 +	local-mac-address = [ 00 00 00 00 00 00 ];
 +	allwinner,leds-active-low;
 +	status = "okay";
 +};
 +
 +&ir {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&r_ir_rx_pin>;
 +	status = "okay";
 +};
 +
 +&mmc0 {
 +	vmmc-supply = <&reg_vcc3v3>;
 +	bus-width = <4>;
 +	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 +	status = "okay";
 +};
 +
 +&mmc1 {
 +    vmmc-supply = <&reg_vcc3v3>;
 +    vqmmc-supply = <&reg_vcc3v3>;
 +    mmc-pwrseq = <&wifi_pwrseq>;
 +    bus-width = <4>;
 +    non-removable;
 +    status = "okay";
 +    brcmf: bcrmf@1 {
 +        reg = <1>;
 +        compatible = "brcm,bcm4329-fmac";
 +    };
 +};
 +
 +&mmc2 {
 +    vmmc-supply = <&reg_vcc3v3>;
 +    bus-width = <8>;
 +    non-removable;
 +    cap-mmc-hw-reset;
 +    boot_device = <0>;
 +    status = "okay";
 +};
 +
 +&mmc2_8bit_pins {
 +    /* Increase drive strength for DDR modes */
 +    drive-strength = <40>;
 +    /* eMMC is missing pull-ups */
 +    bias-pull-up;
 +};
 +
 +&hdmi {
 +	status = "okay";
 +};
 +
 +&hdmi_out {
 +	hdmi_out_con: endpoint {
 +		remote-endpoint = <&hdmi_con_in>;
 +	};
 +};
 +
 +
 +&pio {
 +	leds_npi: led_pins@0 {
 +		pins = "PA10";
 +		function = "gpio_out";
 +	};
 +	gmac_power_pin_nanopi: gmac_power_pin@0 {
 +		pins = "PD6";
 +		function = "gpio_out";
 +	};
 +	bt_pwr_pin: bt_pwr_pin@0 {
 +		pins = "PG13";
 +		function = "gpio_out";
 +	};
 +	spi0_cs_pins: spi0_cs_pins {
 +        pins = "PC3", "PA6";
 +        function = "gpio_out";
 +    };
 +};
 +&r_pio {
 +	leds_r_npi: led_pins@0 {
 +		pins = "PL10";
 +		function = "gpio_out";
 +	};
 +	vdd_cpux_r_npi: regulator_pins@0 {
 +		allwinner,pins = "PL6";
 +		allwinner,function = "gpio_out";
 +		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 +		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 +	};
 +	wifi_en_npi: wifi_en_pin {
 +        pins = "PL7";
 +        function = "gpio_out";
 +    };
 +};
 +&ohci0 {
 +	status = "okay";
 +};
 +
 +&ohci1 {
 +	status = "okay";
 +};
 +
 +&ohci2 {
 +	status = "okay";
 +};
 +
 +&ohci3 {
 +	status = "okay";
 +};
 +
 +&spi0 {
 +	status = "okay";
 +        spi-flash@0 {
 +                #address-cells = <1>;
 +                #size-cells = <0>;
 +                compatible = "jedec,spi-nor";
 +                reg = <0>; /* Chip select 0 */
 +                spi-max-frequency = <10000000>;
 +                status = "okay";
 +                partitions {
 +                        compatible = "fixed-partitions";
 +                        #address-cells = <1>;
 +                        #size-cells = <1>;
 +                        partition@0 {
 +                                label = "uboot";
 +                                reg = <0x0 0x100000>;
 +                        };
 +                        partition@100000 {
 +                                label = "env";
 +                                reg = <0x100000 0x100000>;
 +                        };
 +                };
 +        };
 +};
 +
 +&uart0 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&uart0_pa_pins>;
 +	status = "okay";
 +};
 +
 +&uart1 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&uart1_pins>;
 +	status = "disabled";
 +};
 +
 +&uart2 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&uart2_pins>;
 +	status = "disabled";
 +};
 +
 +&uart3 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
 +	status = "okay";
 +};
 +&usb_otg {
 +	dr_mode = "otg";
 +	status = "okay";
 +};
 +
 +&usbphy {
 +	/* USB Type-A ports' VBUS is always on */
 +	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
 +	usb0_vbus-supply = <&reg_usb0_vbus>;
 +	status = "okay";
 +};
 +
 +&i2s0 {
 +	sound-dai = <&pcm5102a>;
 +	status = "disabled";
 +};
 \ No newline at end of file
--- a/patch/kernel/sunxi-dev/board-h5-add-0001-nanopi-neo-core2.patch
+++ b/patch/kernel/sunxi-dev/board-h5-add-0001-nanopi-neo-core2.patch
@ -0,0 +1,228 @@
 diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
 index c6fc096..731e2ae 100644
 --- a/arch/arm64/boot/dts/allwinner/Makefile
 +++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
 +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-core2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-k1-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-core2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-core2.dts
 new file mode 100644
 index 000000000..b3035ddd7
 --- /dev/null
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-core2.dts
@@ -0,0 +1,210 @@
 +/*
 + * Copyright (C) 2017 Antony Antony <antony@phenome.org>
 + * Copyright (C) 2016 ARM Ltd.
 + *
 + * This file is dual-licensed: you can use it either under the terms
 + * of the GPL or the X11 license, at your option. Note that this dual
 + * licensing only applies to this file, and not this project as a
 + * whole.
 + *
 + *  a) This file is free software; you can redistribute it and/or
 + *     modify it under the terms of the GNU General Public License as
 + *     published by the Free Software Foundation; either version 2 of the
 + *     License, or (at your option) any later version.
 + *
 + *     This file is distributed in the hope that it will be useful,
 + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 + *     GNU General Public License for more details.
 + *
 + * Or, alternatively,
 + *
 + *  b) Permission is hereby granted, free of charge, to any person
 + *     obtaining a copy of this software and associated documentation
 + *     files (the "Software"), to deal in the Software without
 + *     restriction, including without limitation the rights to use,
 + *     copy, modify, merge, publish, distribute, sublicense, and/or
 + *     sell copies of the Software, and to permit persons to whom the
 + *     Software is furnished to do so, subject to the following
 + *     conditions:
 + *
 + *     The above copyright notice and this permission notice shall be
 + *     included in all copies or substantial portions of the Software.
 + *
 + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 + *     OTHER DEALINGS IN THE SOFTWARE.
 + */
 +
 +/dts-v1/;
 +#include "sun50i-h5.dtsi"
 +
 +#include <dt-bindings/gpio/gpio.h>
 +#include <dt-bindings/input/input.h>
 +#include <dt-bindings/pinctrl/sun4i-a10.h>
 +
 +/ {
 +	model = "FriendlyARM NanoPi NEO Core2";
 +	compatible = "friendlyarm,nanopi-neo-core2", "allwinner,sun50i-h5";
 +
 +	aliases {
 +		ethernet0 = &emac;
 +		serial0 = &uart0;
 +	};
 +
 +	chosen {
 +		stdout-path = "serial0:115200n8";
 +	};
 +
 +	leds {
 +		compatible = "gpio-leds";
 +
 +		pwr {
 +			label = "nanopi:red:pwr";
 +			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
 +			linux,default-trigger = "default-on";
 +		};
 +
 +		status {
 +			label = "nanopi:green:status";
 +			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
 +			linux,default-trigger = "heartbeat";
 +		};
 +	};
 +
 +	reg_gmac_3v3: gmac-3v3 {
 +		compatible = "regulator-fixed";
 +		pinctrl-names = "default";
 +		regulator-name = "gmac-3v3";
 +		regulator-min-microvolt = <3300000>;
 +		regulator-max-microvolt = <3300000>;
 +		startup-delay-us = <100000>;
 +		enable-active-high;
 +		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
 +	};
 +
 +	reg_vcc3v3: vcc3v3 {
 +		compatible = "regulator-fixed";
 +		regulator-name = "vcc3v3";
 +		regulator-min-microvolt = <3300000>;
 +		regulator-max-microvolt = <3300000>;
 +	};
 +
 +	wifi_pwrseq: wifi_pwrseq {
 +		compatible = "mmc-pwrseq-simple";
 +		pinctrl-names = "default";
 +		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 +		post-power-on-delay-ms = <200>;
 +	};
 +};
 +
 +&cpu0 {
 +	cpu-supply = <&vdd_cpux>;
 +};
 +
 +&codec {
 +	allwinner,audio-routing =
 +		"Line Out", "LINEOUT",
 +		"MIC1", "Mic",
 +		"Mic",  "MBIAS";
 +	status = "okay";
 +};
 +
 +&ehci0 {
 +	status = "okay";
 +};
 +
 +&ehci3 {
 +	status = "okay";
 +};
 +
 +&emac {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&emac_rgmii_pins>;
 +	phy-supply = <&reg_gmac_3v3>;
 +	phy-handle = <&ext_rgmii_phy>;
 +	phy-mode = "rgmii";
 +	status = "okay";
 +};
 +
 +&external_mdio {
 +	ext_rgmii_phy: ethernet-phy@7 {
 +		compatible = "ethernet-phy-ieee802.3-c22";
 +		reg = <7>;
 +	};
 +};
 +
 +&mmc0 {
 +	vmmc-supply = <&reg_vcc3v3>;
 +	bus-width = <4>;
 +	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 +	status = "okay";
 +};
 +
 +&mmc1 {
 +	vmmc-supply = <&reg_vcc3v3>;
 +	vqmmc-supply = <&reg_vcc3v3>;
 +	mmc-pwrseq = <&wifi_pwrseq>;
 +	bus-width = <4>;
 +	non-removable;
 +	status = "okay";
 +
 +	brcmf: wifi@1 {
 +		reg = <1>;
 +		compatible = "brcm,bcm4329-fmac";
 +	};
 +};
 +
 +&mmc2 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&mmc2_8bit_pins>;
 +	vmmc-supply = <&reg_vcc3v3>;
 +	bus-width = <8>;
 +	non-removable;
 +	cap-mmc-hw-reset;
 +	status = "okay";
 +};
 +
 +&ohci0 {
 +	status = "okay";
 +};
 +
 +&ohci3 {
 +	status = "okay";
 +};
 +
 +&r_i2c {
 +	status = "okay";
 +
 +	vdd_cpux: regulator@65 {
 +		compatible = "silergy,sy8106a";
 +		reg = <0x65>;
 +		silergy,fixed-microvolt = <1000000>;
 +		regulator-min-microvolt = <1000000>;
 +		regulator-max-microvolt = <1400000>;
 +		regulator-ramp-delay = <200>;
 +		regulator-boot-on;
 +		regulator-always-on;
 +	};
 +};
 +
 +&uart0 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&uart0_pa_pins>;
 +	status = "okay";
 +};
 +
 +&usb_otg {
 +	dr_mode = "host";
 +	status = "okay";
 +};
 +
 +&usbphy {
 +	/* USB Type-A ports' VBUS is always on */
 +	status = "okay";
 +};
--- a/patch/kernel/sunxi-dev/board-h5-add-0002-nanopi-neo2-v1.1.patch
+++ b/patch/kernel/sunxi-dev/board-h5-add-0002-nanopi-neo2-v1.1.patch
@ -0,0 +1,198 @@
 diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
 index 731e2aec..bb9012fa 100644
 --- a/arch/arm64/boot/dts/allwinner/Makefile
 +++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
 +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2-v1.1.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-core2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-m1-plus2.dtb
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2-v1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2-v1.1.dts
 new file mode 100644
 index 00000000..cab3c73b
 --- /dev/null
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2-v1.1.dts
@@ -0,0 +1,180 @@
 +/*
 + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
 + *
 + * This file is dual-licensed: you can use it either under the terms
 + * of the GPL or the X11 license, at your option. Note that this dual
 + * licensing only applies to this file, and not this project as a
 + * whole.
 + *
 + *  a) This file is free software; you can redistribute it and/or
 + *     modify it under the terms of the GNU General Public License as
 + *     published by the Free Software Foundation; either version 2 of the
 + *     License, or (at your option) any later version.
 + *
 + *     This file is distributed in the hope that it will be useful,
 + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 + *     GNU General Public License for more details.
 + *
 + * Or, alternatively,
 + *
 + *  b) Permission is hereby granted, free of charge, to any person
 + *     obtaining a copy of this software and associated documentation
 + *     files (the "Software"), to deal in the Software without
 + *     restriction, including without limitation the rights to use,
 + *     copy, modify, merge, publish, distribute, sublicense, and/or
 + *     sell copies of the Software, and to permit persons to whom the
 + *     Software is furnished to do so, subject to the following
 + *     conditions:
 + *
 + *     The above copyright notice and this permission notice shall be
 + *     included in all copies or substantial portions of the Software.
 + *
 + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 + *     OTHER DEALINGS IN THE SOFTWARE.
 + */
 +
 +/dts-v1/;
 +#include "sun50i-h5.dtsi"
 +
 +#include <dt-bindings/gpio/gpio.h>
 +
 +/ {
 +	model = "FriendlyARM NanoPi NEO 2";
 +	compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
 +
 +	aliases {
 +		ethernet0 = &emac;
 +		serial0 = &uart0;
 +	};
 +
 +	chosen {
 +		stdout-path = "serial0:115200n8";
 +	};
 +
 +	leds {
 +		compatible = "gpio-leds";
 +
 +		pwr {
 +			label = "nanopi:red:pwr";
 +			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
 +			linux,default-trigger = "default-on";
 +		};
 +
 +		status {
 +			label = "nanopi:green:status";
 +			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
 +			linux,default-trigger = "heartbeat";
 +		};
 +	};
 +
 +	reg_gmac_3v3: gmac-3v3 {
 +		compatible = "regulator-fixed";
 +		regulator-name = "gmac-3v3";
 +		regulator-min-microvolt = <3300000>;
 +		regulator-max-microvolt = <3300000>;
 +		startup-delay-us = <100000>;
 +		enable-active-high;
 +		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
 +	};
 +
 +	reg_vcc3v3: vcc3v3 {
 +		compatible = "regulator-fixed";
 +		regulator-name = "vcc3v3";
 +		regulator-min-microvolt = <3300000>;
 +		regulator-max-microvolt = <3300000>;
 +	};
 +
 +	vdd_cpux: gpio-regulator {
 +		compatible = "regulator-gpio";
 +		pinctrl-names = "default";
 +		regulator-name = "vdd-cpux";
 +		regulator-type = "voltage";
 +		regulator-boot-on;
 +		regulator-always-on;
 +		regulator-min-microvolt = <1100000>;
 +		regulator-max-microvolt = <1300000>;
 +		regulator-ramp-delay = <50>; /* 4ms */
 +		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
 +		gpios-states = <0x1>;
 +		states = <1100000 0x0
 +			  1300000 0x1>;
 +	};
 +
 +	reg_usb0_vbus: usb0-vbus {
 +		compatible = "regulator-fixed";
 +		regulator-name = "usb0-vbus";
 +		regulator-min-microvolt = <5000000>;
 +		regulator-max-microvolt = <5000000>;
 +		enable-active-high;
 +		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
 +		status = "okay";
 +	};
 +};
 +
 +&cpu0 {
 +	cpu-supply = <&vdd_cpux>;
 +};
 +
 +&ehci0 {
 +	status = "okay";
 +};
 +
 +&ehci3 {
 +	status = "okay";
 +};
 +
 +&emac {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&emac_rgmii_pins>;
 +	phy-supply = <&reg_gmac_3v3>;
 +	phy-handle = <&ext_rgmii_phy>;
 +	phy-mode = "rgmii";
 +	status = "okay";
 +};
 +
 +&external_mdio {
 +	ext_rgmii_phy: ethernet-phy@7 {
 +		compatible = "ethernet-phy-ieee802.3-c22";
 +		reg = <7>;
 +	};
 +};
 +
 +&mmc0 {
 +	vmmc-supply = <&reg_vcc3v3>;
 +	bus-width = <4>;
 +	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 +	status = "okay";
 +};
 +
 +&ohci0 {
 +	status = "okay";
 +};
 +
 +&ohci3 {
 +	status = "okay";
 +};
 +
 +&uart0 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&uart0_pa_pins>;
 +	status = "okay";
 +};
 +
 +&usb_otg {
 +	dr_mode = "otg";
 +	status = "okay";
 +};
 +
 +&usbphy {
 +	/* USB Type-A port's VBUS is always on */
 +	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
 +	usb0_vbus-supply = <&reg_usb0_vbus>;
 +	status = "okay";
 +};
--- a/patch/kernel/sunxi-dev/board-h5-add-0003-nanopi-m1-plus2.patch
+++ b/patch/kernel/sunxi-dev/board-h5-add-0003-nanopi-m1-plus2.patch
@ -0,0 +1,262 @@
 diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
 index 323f30fa..ac1eead4 100644
 --- a/arch/arm64/boot/dts/allwinner/Makefile
 +++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -17,6 +17,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-core2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-k1-plus.dtb
 +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-m1-plus2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
 diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-m1-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-m1-plus2.dts
 new file mode 100644
 index 0000000..a6bf32d
 --- /dev/null
 +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-m1-plus2.dts
@@ -0,0 +1,244 @@
 +/*
 + * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
 + * Copyright (C) 2017 Armbian
 + *
 + * This file is dual-licensed: you can use it either under the terms
 + * of the GPL or the X11 license, at your option. Note that this dual
 + * licensing only applies to this file, and not this project as a
 + * whole.
 + *
 + *  a) This file is free software; you can redistribute it and/or
 + *     modify it under the terms of the GNU General Public License as
 + *     published by the Free Software Foundation; either version 2 of the
 + *     License, or (at your option) any later version.
 + *
 + *     This file is distributed in the hope that it will be useful,
 + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 + *     GNU General Public License for more details.
 + *
 + * Or, alternatively,
 + *
 + *  b) Permission is hereby granted, free of charge, to any person
 + *     obtaining a copy of this software and associated documentation
 + *     files (the "Software"), to deal in the Software without
 + *     restriction, including without limitation the rights to use,
 + *     copy, modify, merge, publish, distribute, sublicense, and/or
 + *     sell copies of the Software, and to permit persons to whom the
 + *     Software is furnished to do so, subject to the following
 + *     conditions:
 + *
 + *     The above copyright notice and this permission notice shall be
 + *     included in all copies or substantial portions of the Software.
 + *
 + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 + *     OTHER DEALINGS IN THE SOFTWARE.
 + */
 +
 +/dts-v1/;
 +#include "sun50i-h5.dtsi"
 +
 +#include <dt-bindings/gpio/gpio.h>
 +
 +/ {
 +	model = "FriendlyARM Nanopi M1 Plus 2";
 +	compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
 +
 +	aliases {
 +		ethernet0 = &emac;
 +		serial0 = &uart0;
 +	};
 +
 +	chosen {
 +		stdout-path = "serial0:115200n8";
 +	};
 +
 +	leds {
 +		compatible = "gpio-leds";
 +
 +		pwr {
 +			label = "nanopi:green:pwr";
 +			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
 +			default-state = "on";
 +		};
 +
 +		status {
 +			label = "nanopi:blue:status";
 +			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
 +		};
 +	};
 +
 +	reg_gmac_3v3: gmac-3v3 {
 +		compatible = "regulator-fixed";
 +		regulator-name = "gmac-3v3";
 +		regulator-min-microvolt = <3300000>;
 +		regulator-max-microvolt = <3300000>;
 +		startup-delay-us = <100000>;
 +		enable-active-high;
 +		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
 +	};
 +
 +	reg_vcc3v3: vcc3v3 {
 +		compatible = "regulator-fixed";
 +		regulator-name = "vcc3v3";
 +		regulator-min-microvolt = <3300000>;
 +		regulator-max-microvolt = <3300000>;
 +	};
 +
 +	reg_usb0_vbus: usb0-vbus {
 +		compatible = "regulator-fixed";
 +		regulator-name = "usb0-vbus";
 +		regulator-min-microvolt = <5000000>;
 +		regulator-max-microvolt = <5000000>;
 +		enable-active-high;
 +		gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
 +		status = "okay";
 +	};
 +
 +	wifi_pwrseq: wifi_pwrseq {
 +		compatible = "mmc-pwrseq-simple";
 +		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
 +		post-power-on-delay-ms = <50>;
 +	};
 +
 +};
 +
 +&ehci0 {
 +	status = "okay";
 +};
 +
 +&ehci1 {
 +	status = "okay";
 +};
 +
 +&ehci2 {
 +	status = "okay";
 +};
 +
 +&ehci3 {
 +	status = "okay";
 +};
 +
 +&emac {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&emac_rgmii_pins>;
 +	phy-supply = <&reg_gmac_3v3>;
 +	phy-handle = <&ext_rgmii_phy>;
 +	phy-mode = "rgmii";
 +	status = "okay";
 +};
 +
 +&mdio {
 +	ext_rgmii_phy: ethernet-phy@7 {
 +		compatible = "ethernet-phy-ieee802.3-c22";
 +		reg = <7>;
 +	};
 +};
 +
 +&mmc0 {
 +	vmmc-supply = <&reg_vcc3v3>;
 +	bus-width = <4>;
 +	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 +	status = "okay";
 +};
 +
 +&mmc1 {
 +        vmmc-supply = <&reg_vcc3v3>;
 +        vqmmc-supply = <&reg_vcc3v3>;
 +        mmc-pwrseq = <&wifi_pwrseq>;
 +        bus-width = <4>;
 +        non-removable;
 +        status = "okay";
 +
 +        brcmf: brcmf@1 {
 +                reg = <1>;
 +                compatible = "brcm,bcm4329-fmac";
 +                interrupt-parent = <&pio>;
 +                interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 */
 +                interrupt-names = "host-wake";
 +                pinctrl-names = "default";
 +                pinctrl-0 = <&wifi_wake>;
 +        };
 +};
 +
 +&mmc2 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&mmc2_8bit_pins>;
 +	vmmc-supply = <&reg_vcc3v3>;
 +	bus-width = <8>;
 +	non-removable;
 +	cap-mmc-hw-reset;
 +	status = "okay";
 +};
 +
 +&de {
 +	status = "okay";
 +};
 +
 +&ohci0 {
 +	status = "okay";
 +};
 +
 +&ohci1 {
 +	status = "okay";
 +};
 +
 +&ohci2 {
 +	status = "okay";
 +};
 +
 +&ohci3 {
 +	status = "okay";
 +};
 +
 +&hdmi {
 +	status = "okay";
 +};
 +
 +&mixer0 {
 +	status = "okay";
 +};
 +
 +&r_pio {
 +	wifi_wake: wifi_wake@0 {
 +		pins = "PL7";
 +		function = "irq";
 +		bias-pull-up;
 +	};
 +};
 +
 +&sound_hdmi {
 +	status = "okay";
 +};
 +
 +&tcon0 {
 +	status = "okay";
 +};
 +
 +&r_i2c {
 +	status = "okay";
 +};
 +
 +&uart0 {
 +	pinctrl-names = "default";
 +	pinctrl-0 = <&uart0_pa_pins>;
 +	status = "okay";
 +};
 +
 +&usb_otg {
 +	dr_mode = "peripheral";
 +	status = "okay";
 +};
 +
 +&usbphy {
 +	/* USB Type-A port's VBUS is always on */
 +	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
 +	usb0_vbus-supply = <&reg_usb0_vbus>;
 +	status = "okay";
 +};
--- a/Show more
+++ b/Show more