diff --git a/config/sources/mvebu64.conf b/config/sources/mvebu64.conf
index 0050008a0..e61739f6c 100644
--- a/config/sources/mvebu64.conf
+++ b/config/sources/mvebu64.conf
@@ -2,11 +2,11 @@ ARCH=arm64
 KERNEL_IMAGE_TYPE=Image
 
 BOOTSCRIPT="boot-espressobin.cmd:boot.cmd"
-UBOOT_TARGET_MAP=";;u-boot.bin flash-image.bin"
+UBOOT_TARGET_MAP=";;flash-image-*.bin"
 
 BOOTSOURCE='https://github.com/MarvellEmbeddedProcessors/u-boot-marvell.git'
 BOOTDIR=$MAINLINE_UBOOT_DIR
-BOOTBRANCH='branch:u-boot-2017.03-armada-17.10'
+BOOTBRANCH='branch:u-boot-2017.03-armada-18.09'
 
 UBOOT_USE_GCC='< 7.0'
 
@@ -14,9 +14,9 @@ BOOTENV_FILE='clearfog-default.txt'
 
 ATFSOURCE='https://github.com/MarvellEmbeddedProcessors/atf-marvell'
 ATFDIR='arm-trusted-firmware-espressobin'
-ATFBRANCH='branch:atf-v1.3-armada-17.10'
-ATF_USE_GCC='== 4.9'
-ATF_COMPILER='arm-linux-gnueabi-'
+ATFBRANCH='branch:atf-v1.5-armada-18.09'
+ATF_USE_GCC='> 7.2'
+ATF_COMPILER='aarch64-linux-gnu-'
 ATF_TARGET_MAP='DEBUG=1 USE_COHERENT_MEM=0 LOG_LEVEL=20 SECURE=0 CLOCKSPRESET=CPU_800_DDR_800 DDR_TOPOLOGY=2 BOOTDEV=SPINOR PARTNUM=0 PLAT=a3700;;build/a3700/debug/bl31.bin'
 case $BRANCH in
 	default)
@@ -54,8 +54,8 @@ NM_IGNORE_DEVICES="interface-name:eth*,interface-name:wan*,interface-name:lan*,i
 
 write_uboot_platform()
 {
-#	dd if=$1/u-boot.mmc of=$2 bs=512 seek=1 status=noxfer > /dev/null 2>&1
-        /bin/true
+	# flashing process via u-boot only for now https://www.armbian.com/espressobin/
+	/bin/true
 }
 
 family_tweaks()
@@ -67,16 +67,36 @@ family_tweaks()
 	echo "ttyMV0" >> $SDCARD/etc/securetty
 }
 
+atf_custom_postprocess()
+{
+	# prepare compilers for postprocess
+	ubootdir="$SRC/cache/sources/$BOOTDIR/${BOOTBRANCH##*:}"
+	export ATF1=$toolchain/$ATF_COMPILER
+	export ATF2=$(find_toolchain "arm-linux-gnueabi-" "> 7.0")/arm-linux-gnueabi-
+	export BL33=$ubootdir"/u-boot.bin"
+	# copy extra DDR topology
+	cp $SRC/packages/blobs/espressobin/DDR* $SRC/cache/sources/marvell-tools/tim/ddr/
+}
+
 uboot_custom_postprocess()
 {
-	local ATF_COMPILER='arm-linux-gnueabi-'
-	local ATF_USE_GCC='< 6.0'
 	local atfdir="$SRC/cache/sources/$ATFDIR/${ATFBRANCH##*:}"
 	local ubootdir="$SRC/cache/sources/$BOOTDIR/${BOOTBRANCH##*:}"
-	toolchain=$(find_toolchain "$ATF_COMPILER" "$ATF_USE_GCC")
 	cd $atfdir
-	display_alert "Building boot image" "" "info"
-    make DEBUG=1 USE_COHERENT_MEM=0 LOG_LEVEL=20 SECURE=0 CLOCKSPRESET=CPU_800_DDR_800 DDR_TOPOLOGY=2 BOOTDEV=SPINOR PARTNUM=0 PLAT=a3700 all fip BL33=$SRC/cache/sources/$BOOTDIR/${BOOTBRANCH##*:}/u-boot.bin WTP=../../marvell-tools $CTHREADS CROSS_CM3=$toolchain/$ATF_COMPILER >> $DEST/debug/compilation.log
-	cp build/a3700/debug/flash-image.bin $ubootdir
+	clocks=( 600_600 800_800 1000_800 1200_750 )
+	topology=( 512m_1cs_0 512m_2cs_0 1g_2cs_2 1g_1cs_4 2g_2cs_2 )
+	for i in "${clocks[@]}"
+	do
+        for j in "${topology[@]}"
+        do
+			FILENAME="flash-image-$j-$i.bin"
+			DDR_TOPOLOGY="${j##*_}"
+			CLOCKSPRESET="CPU_${i%_*}_DDR_${i##*_}"
+			display_alert "Building $FILENAME" "" "info"
+			make distclean >> $DEST/debug/compilation.log 2>&1
+			make MV_DDR_PATH=$SRC/cache/sources/marvell-ddr CROSS_COMPILE=$ATF1 DEBUG=1 USE_COHERENT_MEM=0 LOG_LEVEL=20 SECURE=0 CLOCKSPRESET=$CLOCKSPRESET DDR_TOPOLOGY=$DDR_TOPOLOGY BOOTDEV=SPINOR PARTNUM=0 PLAT=a3700 all fip BL33=$BL33 WTP=$SRC/cache/sources/marvell-tools $CTHREADS CROSS_CM3=$ATF2 >> $DEST/debug/compilation.log 2>&1
+			cp build/a3700/debug/flash-image.bin $ubootdir/$FILENAME
+        done
+	done
 	cd $ubootdir
 }
diff --git a/lib/general.sh b/lib/general.sh
index 51be36791..37a14cb62 100644
--- a/lib/general.sh
+++ b/lib/general.sh
@@ -657,6 +657,8 @@ prepare_host()
 		"https://${ARMBIANSERVER}/_toolchains/gcc-linaro-7.2.1-2017.11-x86_64_aarch64-linux-gnu.tar.xz"
 		"https://${ARMBIANSERVER}/_toolchains/gcc-linaro-7.2.1-2017.11-x86_64_arm-linux-gnueabihf.tar.xz"
 		"https://${ARMBIANSERVER}/_toolchains/gcc-linaro-7.2.1-2017.11-x86_64_arm-eabi.tar.xz"
+		"https://${ARMBIANSERVER}/_toolchains/gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabi.tar.xz"
+		"https://${ARMBIANSERVER}/_toolchains/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu.tar.xz"
 		)
 
 	for toolchain in ${toolchains[@]}; do
diff --git a/lib/main.sh b/lib/main.sh
index 78a887e18..798774ad9 100644
--- a/lib/main.sh
+++ b/lib/main.sh
@@ -240,7 +240,8 @@ if [[ $IGNORE_UPDATES != yes ]]; then
 	fi
 	fetch_from_repo "https://github.com/linux-sunxi/sunxi-tools" "sunxi-tools" "branch:master"
 	fetch_from_repo "https://github.com/armbian/rkbin" "rkbin-tools" "branch:master"
-	fetch_from_repo "https://github.com/MarvellEmbeddedProcessors/A3700-utils-marvell" "marvell-tools" "branch:A3700_utils-armada-17.10"
+	fetch_from_repo "https://github.com/MarvellEmbeddedProcessors/A3700-utils-marvell" "marvell-tools" "branch:A3700_utils-armada-18.09"
+	fetch_from_repo "https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git" "marvell-ddr" "branch:mv_ddr-armada-18.09"
 	fetch_from_repo "https://github.com/armbian/odroidc2-blobs" "odroidc2-blobs" "branch:master"
 	fetch_from_repo "https://github.com/armbian/testings" "testing-reports" "branch:master"
 fi
diff --git a/packages/blobs/espressobin/DDR_TOPOLOGY_2-1g.txt b/packages/blobs/espressobin/DDR_TOPOLOGY_2-1g.txt
new file mode 100644
index 000000000..5a3455b84
--- /dev/null
+++ b/packages/blobs/espressobin/DDR_TOPOLOGY_2-1g.txt
@@ -0,0 +1,22 @@
+#
+# This file is the input for A3700 DDR porting tool,
+# each item is one parameter for DDR topology, which will be parsed by
+# DDR tool and generate DDR register list accordingly.
+# Supported Marvell boards:
+#       DDR3 2CS : EspressoBIN (1GB)
+#
+
+#DDR3
+ddr_type=0
+
+#2CS
+ddr_cs_mask=3
+
+#DDR3_1600K
+ddr_speedbin_index=12
+
+#16BIT
+ddr_bus_width_index=2
+
+#4Gbits (512MB)
+ddr_mem_size_index=3
diff --git a/packages/blobs/espressobin/DDR_TOPOLOGY_2-2g.txt b/packages/blobs/espressobin/DDR_TOPOLOGY_2-2g.txt
new file mode 100644
index 000000000..63ef9088c
--- /dev/null
+++ b/packages/blobs/espressobin/DDR_TOPOLOGY_2-2g.txt
@@ -0,0 +1,22 @@
+#
+# This file is the input for A3700 DDR porting tool,
+# each item is one parameter for DDR topology, which will be parsed by
+# DDR tool and generate DDR register list accordingly.
+# Supported Marvell boards:
+#       DDR3 2CS : EspressoBIN (2GB)
+#
+
+#DDR3
+ddr_type=0
+
+#2CS
+ddr_cs_mask=3
+
+#DDR3_1600K
+ddr_speedbin_index=12
+
+#16BIT
+ddr_bus_width_index=2
+
+#8Gbits (1024MB)
+ddr_mem_size_index=4
diff --git a/patch/u-boot/u-boot-mvebu64/0001-drivers-spi-Add-support-for-Macronix-mx25u3235f-devi.patch b/patch/u-boot/u-boot-mvebu64/0001-drivers-spi-Add-support-for-Macronix-mx25u3235f-devi.patch
new file mode 100644
index 000000000..bb550714a
--- /dev/null
+++ b/patch/u-boot/u-boot-mvebu64/0001-drivers-spi-Add-support-for-Macronix-mx25u3235f-devi.patch
@@ -0,0 +1,29 @@
+From 7b0e72b4904b825d6f96d3a2a7c29a08c8b3968a Mon Sep 17 00:00:00 2001
+From: Konstantin Porotchkin <kostap@marvell.com>
+Date: Wed, 5 Sep 2018 16:56:02 +0300
+Subject: [PATCH] drivers: spi: Add support for Macronix mx25u3235f device
+
+Add support for Macronix SPI flash shipped on latest
+Espressobin boards
+
+Change-Id: Ia0798dfd4177c407c126e4f823d64d821b755433
+Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
+---
+ drivers/mtd/spi/spi_flash_ids.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/mtd/spi/spi_flash_ids.c b/drivers/mtd/spi/spi_flash_ids.c
+index edca94e..1c50e0d 100644
+--- a/drivers/mtd/spi/spi_flash_ids.c
++++ b/drivers/mtd/spi/spi_flash_ids.c
+@@ -82,6 +82,7 @@ const struct spi_flash_info spi_flash_ids[] = {
+ 	{"mx25l25635f",	   INFO(0xc22019, 0x0, 64 * 1024,   512, RD_FULL | WR_QPP) },
+ 	{"mx25l51235f",	   INFO(0xc2201a, 0x0, 64 * 1024,  1024, RD_FULL | WR_QPP) },
+ 	{"mx25l12855e",	   INFO(0xc22618, 0x0, 64 * 1024,   256, RD_FULL | WR_QPP) },
++	{"mx25u3235f",     INFO(0xc22536, 0x0, 64 * 1024,    64, RD_FULL | WR_QPP) },
+ 	{"mx66u51235f",    INFO(0xc2253a, 0x0, 64 * 1024,  1024, RD_FULL | WR_QPP) },
+ 	{"mx66l1g45g",     INFO(0xc2201b, 0x0, 64 * 1024,  2048, RD_FULL | WR_QPP) },
+ #endif
+-- 
+2.7.4
+
diff --git a/patch/u-boot/u-boot-mvebu64/loading-uboot-script.patch b/patch/u-boot/u-boot-mvebu64/loading-uboot-script.patch
deleted file mode 100644
index cde8805ed..000000000
--- a/patch/u-boot/u-boot-mvebu64/loading-uboot-script.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-diff --git a/include/configs/mvebu_armada-common.h b/include/configs/mvebu_armada-common.h
-index c406a7a..ddd7f5e
---- a/include/configs/mvebu_armada-common.h
-+++ b/include/configs/mvebu_armada-common.h
-@@ -36,7 +36,7 @@
- #define CONFIG_ETHPRIME			"eth0"
- #define CONFIG_ROOTPATH                 "/srv/nfs/" /* Default Dir for NFS */
- #define CONFIG_EXTRA_ENV_SETTINGS	"kernel_addr=0x5000000\0"	\
--					"initrd_addr=0xa00000\0"	\
-+					"initrd_addr=0x1100000\0"	\
- 					"initrd_size=0x2000000\0"	\
- 					"fdt_addr=0x4f00000\0"		\
- 					"loadaddr=0x5000000\0"		\
-@@ -50,7 +50,8 @@
- 					"eth1addr=00:51:82:11:22:01\0"	\
- 					"eth2addr=00:51:82:11:22:02\0"	\
- 					"eth3addr=00:51:82:11:22:03\0"	\
--					"image_name=Image\0"		\
-+					"image_name=boot/Image\0"		\
-+					"load_script=if test -e mmc 0:1 boot/boot.scr; then echo \"... booting from SD\";setenv boot_interface mmc;else echo \"... booting from USB/SATA\";usb start;setenv boot_interface usb;fi;if test -e $boot_interface 0:1 boot/boot.scr;then ext4load $boot_interface 0:1 0x00800000 boot/boot.scr; source; fi\0" \
- 					"get_ramfs=if test \"${ramfs_name}\"" \
- 						" != \"-\"; then setenv " \
- 						"ramfs_addr 0x8000000; " \
-@@ -69,7 +70,7 @@
- 						":$netdev:none nfsroot="\
- 						"$serverip:$rootpath " \
- 						"$extra_params"
--#define CONFIG_BOOTCOMMAND	"run get_images; run set_bootargs; " \
-+#define CONFIG_BOOTCOMMAND	"run get_images; run set_bootargs; run load_script;" \
- 				"booti $kernel_addr $ramfs_addr $fdt_addr"
- #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
- /*