[ sunxi-next ] u-boot patches adjustement

config/boards/bananapim2zero.csc

@@ -1,25 +1,14 @@
 # H3/H2+ quad core 512MB SoC Wi-Fi/BT
 BOARD_NAME="Banana Pi M2 Zero"
 BOARDFAMILY="sun8i"
-BOOTCONFIG="Sinovoip_BPI_M2_Zero_defconfig"
+BOOTCONFIG="bananapi_m2_zero_defconfig"
 #
 MODULES="#w1-sunxi #w1-gpio #w1-therm #sunxi-cir dhd hci_uart rfcomm hidp"
 MODULES_NEXT="brcmfmac g_serial"
-CPUMIN="240000"
-CPUMAX="1200000"
 #
 KERNEL_TARGET="default,next,dev"
 CLI_TARGET=""
 DESKTOP_TARGET=""
 #
-CLI_BETA_TARGET="stretch:next"
+CLI_BETA_TARGET=""
 DESKTOP_BETA_TARGET=""
-#
-RECOMMENDED="Debian_stretch_next_nightly:75"
-#
-BOARDRATING=""
-CHIP="http://docs.armbian.com/Hardware_Allwinner-H3/"
-REVIEW="https://forum.armbian.com/topic/4801-banana-pi-zero/"
-HARDWARE="https://linux-sunxi.org/Sinovoip_Banana_Pi_M2_Zero"
-FORUMS="http://forum.armbian.com/index.php/forum/13-allwinner-h3/"
-BUY="http://amzn.to/2Hi9DVt"

patch/u-boot/u-boot-sunxi/add-bananapi-bpi-zero.patch

@@ -1,184 +0,0 @@
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index d36447d..3093c11 100644
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -365,6 +365,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
- 	sun8i-a83t-cubietruck-plus.dtb \
- 	sun8i-a83t-tbs-a711.dts
- dtb-$(CONFIG_MACH_SUN8I_H3) += \
-+	sun8i-h2-plus-bananapi-m2-zero.dtb \
- 	sun8i-h2-plus-libretech-all-h3-cc.dtb \
- 	sun8i-h2-plus-orangepi-r1.dtb \
- 	sun8i-h2-plus-orangepi-zero.dtb \
-diff --git a/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
-new file mode 100644
-index 0000000..61de91d
---- /dev/null
-+++ b/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
-@@ -0,0 +1,141 @@
-+/*
-+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
-+ *
-+ * Based on sun8i-h3-bananapi-m2-plus.dts, which is:
-+ *   Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun8i-h3.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+	model = "Banana Pi BPI-M2-Zero";
-+	compatible = "sinovoip,bpi-m2-zero", "allwinner,sun8i-h2-plus";
-+
-+	aliases {
-+		serial0 = &uart0;
-+		serial1 = &uart1;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-names = "default";
-+
-+		pwr_led {
-+			label = "bananapi-m2-zero:red:pwr";
-+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
-+			default-state = "on";
-+		};
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+		pinctrl-names = "default";
-+
-+		sw4 {
-+			label = "power";
-+			linux,code = <BTN_0>;
-+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		pinctrl-names = "default";
-+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-+	};
-+};
-+
-+&mmc0 {
-+	vmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <4>;
-+	/*
-+	 * On the production batch of this board the card detect GPIO is
-+	 * high active (card inserted), although on the early samples it's
-+	 * low active.
-+	 */
-+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-+	status = "okay";
-+};
-+
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	brcmf: wifi@1 {
-+		reg = <1>;
-+		compatible = "brcm,bcm4329-fmac";
-+		interrupt-parent = <&pio>;
-+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
-+		interrupt-names = "host-wake";
-+	};
-+};
-+
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_pins_a>;
-+	status = "okay";
-+};
-+
-+&usbphy {
-+	usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
-+	/*
-+	 * There're two micro-USB connectors, one is power-only and another is
-+	 * OTG. The Vbus of these two connectors are connected together, so
-+	 * the external USB device will be powered just by the power input
-+	 * from the power-only USB port.
-+	 */
-+	status = "okay";
-+};
-diff --git a/configs/Sinovoip_BPI_M2_Zero_defconfig b/configs/Sinovoip_BPI_M2_Zero_defconfig
-new file mode 100644
-index 0000000..8f96ac1
---- /dev/null
-+++ b/configs/Sinovoip_BPI_M2_Zero_defconfig
-@@ -0,0 +1,19 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_SYS_TEXT_BASE=0x4a000000
-+CONFIG_MACH_SUN8I_H3=y
-+CONFIG_DRAM_CLK=408
-+CONFIG_DRAM_ZQ=3881979
-+CONFIG_DRAM_ODT_EN=y
-+CONFIG_MMC_SUNXI_SLOT_EXTRA=-1
-+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-bananapi-m2-zero"
-+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-+CONFIG_SPL=y
-+# CONFIG_CMD_FLASH is not set
-+# CONFIG_CMD_FPGA is not set
-+# CONFIG_SPL_DOS_PARTITION is not set
-+# CONFIG_SPL_ISO_PARTITION is not set
-+# CONFIG_SPL_EFI_PARTITION is not set
-+CONFIG_SUN8I_EMAC=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_MMC0_CD_PIN=""