previous version of the patch has slightly higher performance impact
compared to disk activity trigger.
This updated patch should have similar impact as disk activity trigger.
- update to latest patchset from Baylibre
- Some bugs addressed
- Open items:
- HDMI does not want to work on boot
- If a "problematic" monitor is present at boot HDMI will not respond to replug
- changing monitors after boot results in 1/2 of the display appearing, second replug and it's ok.
- Changing HDMI resolution results in corrupted screen (aliasing, static, "lines" etc.)
Note: by default Orange Pi Zero Plus2 H5 boards are missing part of their regulator
hardware circuit; as such the default regulator is limited to 1.1v.
Reworked assert-phy-reset-when-waking-up patch to fit into 4.19 kernel DWC2 USB driver
Adding usbphy reset lines patch for rk3288.dtsi in both rockchip next and dev kernels
Removed same reset lines from xt-q8l-v10 next and dev device trees
* helios4: next branch use u-boot 2018
use new u-boot based on upstream 2018
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* helios4: Tweak fancontrol configuration
Adjusted MINSTART and MINSTOP to suit both old and new fan.
Adjusted TEMP threshold so fan would stop or run in minimal speed when
the system idle.
Fixed wrong MINPWM value.
URL:https://wiki.kobol.io/pwm/#configuration-file
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: mvebu-next: use upstream helios4 dts
Helios4 device tree has been merged on upstream since 4.19.
Rework the patch to produce same device tree.
URL:https://patchwork.kernel.org/patch/10449393/
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Helios4: Use boot-mvebu-next bootscript
Use boot-mvebu-next.cmd that make use of upstream's Generic Distro
Configuration.
Since loadaddr and fdt_addr varibales are no longer required, remove the
patch.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Helios4: mvebu-next: Add workaround for SPI and SATA concurrent access issue
Concurrent access on SPI NOR and SATA drives can lead to unstable SATA.
Therefore as workaround, disable SATA controller when SPI flash access
is needed and make it as user configurable item in armbianEnv.txt
This workaround might applies to Clearfog too.
Refer to
Commit 59af84c07c ("Helios4: Add SPI bootloader install feature
(#1126)")
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Bootscripts: Fixed boot-mvebu-next.cmd
The environment setting (armbianEnv.txt) is loaded to RAM located on
${load_addr} but the env import use wrong address (${pxefile_addr_r}).
bootargs still expect ${boot_interface} which carried over from boot-
marvell.cmd. Upstream's distro configuration use ${devtype} instead.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* uboot: mvebu-next: only apply DT fixup script if it exists
* [ buildscript ] Add FORCE_BOOTSCRIPT_UPDATE option
If enabled bootscript will get updated during bsp upgrade.
* Helios4: Enable FORCE_BOOTSCRIPT_UPDATE by default in board config.
* Helios4: Added boot-marvell.cmd compability to u-boot 2018
Revert the changes to use boot-mvebu-next.cmd instead of boot-
marvell.cmd to prevent unbootable system due to incompatibility between
u-boot 2013.01 and boot-mvebu-next.cmd
This reverts commit 0f17ecb233babe ("Helios4: Use boot-mvebu-next
bootscript")
U-Boot 2018 will failed load dtb and script due to missing some
variables on boot-marvell.cmd. This will render the system unbootable.
Re-added and update loading-boot-scr.patch for backward compatibility
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
- Adds the specific shortname per ASUS to allow controlled enumeration of the onboard USB audio codec
- kernel 4.19 saw some rewriting of the naming code
* helios4: next branch use u-boot 2018
use new u-boot based on upstream 2018
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* helios4: Tweak fancontrol configuration
Adjusted MINSTART and MINSTOP to suit both old and new fan.
Adjusted TEMP threshold so fan would stop or run in minimal speed when
the system idle.
Fixed wrong MINPWM value.
URL:https://wiki.kobol.io/pwm/#configuration-file
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* kernel: mvebu-next: use upstream helios4 dts
Helios4 device tree has been merged on upstream since 4.19.
Rework the patch to produce same device tree.
URL:https://patchwork.kernel.org/patch/10449393/
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Helios4: Use boot-mvebu-next bootscript
Use boot-mvebu-next.cmd that make use of upstream's Generic Distro
Configuration.
Since loadaddr and fdt_addr varibales are no longer required, remove the
patch.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Helios4: mvebu-next: Add workaround for SPI and SATA concurrent access issue
Concurrent access on SPI NOR and SATA drives can lead to unstable SATA.
Therefore as workaround, disable SATA controller when SPI flash access
is needed and make it as user configurable item in armbianEnv.txt
This workaround might applies to Clearfog too.
Refer to
Commit 59af84c07c ("Helios4: Add SPI bootloader install feature
(#1126)")
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
* Bootscripts: Fixed boot-mvebu-next.cmd
The environment setting (armbianEnv.txt) is loaded to RAM located on
${load_addr} but the env import use wrong address (${pxefile_addr_r}).
bootargs still expect ${boot_interface} which carried over from boot-
marvell.cmd. Upstream's distro configuration use ${devtype} instead.
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
