diff --git a/Makefile b/Makefile index 10314ba3c7bc5..7537adc4e237d 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 4 PATCHLEVEL = 14 -SUBLEVEL = 215 +SUBLEVEL = 216 EXTRAVERSION = NAME = Petit Gorille diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index c553f9883194f..1a006101f527a 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -470,6 +470,10 @@ static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) { u64 pmcr, val; + /* No PMU available, PMCR_EL0 may UNDEF... */ + if (!kvm_arm_support_pmu_v3()) + return; + pmcr = read_sysreg(pmcr_el0); /* * Writable bits of PMCR_EL0 (ARMV8_PMU_PMCR_MASK) are reset to UNKNOWN diff --git a/block/genhd.c b/block/genhd.c index 449ef56bba708..3958ae39daebf 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -208,14 +208,17 @@ struct hd_struct *disk_part_iter_next(struct disk_part_iter *piter) part = rcu_dereference(ptbl->part[piter->idx]); if (!part) continue; + get_device(part_to_dev(part)); + piter->part = part; if (!part_nr_sects_read(part) && !(piter->flags & DISK_PITER_INCL_EMPTY) && !(piter->flags & DISK_PITER_INCL_EMPTY_PART0 && - piter->idx == 0)) + piter->idx == 0)) { + put_device(part_to_dev(part)); + piter->part = NULL; continue; + } - get_device(part_to_dev(part)); - piter->part = part; piter->idx += inc; break; } diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 7b2df7a54d875..01091c08e9999 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -477,6 +477,7 @@ config BLK_DEV_RBD config BLK_DEV_RSXX tristate "IBM Flash Adapter 900GB Full Height PCIe Device Driver" depends on PCI + select CRC32 help Device driver for IBM's high speed PCIe SSD storage device: Flash Adapter 900GB Full Height. diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c index 4053259bccb8d..1925c89381194 100644 --- a/drivers/i2c/busses/i2c-sprd.c +++ b/drivers/i2c/busses/i2c-sprd.c @@ -71,6 +71,8 @@ /* timeout (ms) for pm runtime autosuspend */ #define SPRD_I2C_PM_TIMEOUT 1000 +/* timeout (ms) for transfer message */ +#define I2C_XFER_TIMEOUT 1000 /* SPRD i2c data structure */ struct sprd_i2c { @@ -244,6 +246,7 @@ static int sprd_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg *msg, bool is_last_msg) { struct sprd_i2c *i2c_dev = i2c_adap->algo_data; + unsigned long time_left; i2c_dev->msg = msg; i2c_dev->buf = msg->buf; @@ -273,7 +276,10 @@ static int sprd_i2c_handle_msg(struct i2c_adapter *i2c_adap, sprd_i2c_opt_start(i2c_dev); - wait_for_completion(&i2c_dev->complete); + time_left = wait_for_completion_timeout(&i2c_dev->complete, + msecs_to_jiffies(I2C_XFER_TIMEOUT)); + if (!time_left) + return -ETIMEDOUT; return i2c_dev->err; } diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c index e2737dc71b677..0a2c2eace3a25 100644 --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -395,13 +395,29 @@ static irqreturn_t st_lsm6dsx_handler_irq(int irq, void *private) static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private) { struct st_lsm6dsx_hw *hw = private; - int count; + int fifo_len = 0, len; - mutex_lock(&hw->fifo_lock); - count = st_lsm6dsx_read_fifo(hw); - mutex_unlock(&hw->fifo_lock); + /* + * If we are using edge IRQs, new samples can arrive while + * processing current interrupt since there are no hw + * guarantees the irq line stays "low" long enough to properly + * detect the new interrupt. In this case the new sample will + * be missed. + * Polling FIFO status register allow us to read new + * samples even if the interrupt arrives while processing + * previous data and the timeslot where the line is "low" is + * too short to be properly detected. + */ + do { + mutex_lock(&hw->fifo_lock); + len = st_lsm6dsx_read_fifo(hw); + mutex_unlock(&hw->fifo_lock); + + if (len > 0) + fifo_len += len; + } while (len > 0); - return !count ? IRQ_NONE : IRQ_HANDLED; + return fifo_len ? IRQ_HANDLED : IRQ_NONE; } static int st_lsm6dsx_buffer_preenable(struct iio_dev *iio_dev) diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c index 09c6b17aaf80e..25e85fdfb9d49 100644 --- a/drivers/iommu/intel_irq_remapping.c +++ b/drivers/iommu/intel_irq_remapping.c @@ -1367,6 +1367,8 @@ static int intel_irq_remapping_alloc(struct irq_domain *domain, irq_data = irq_domain_get_irq_data(domain, virq + i); irq_cfg = irqd_cfg(irq_data); if (!irq_data || !irq_cfg) { + if (!i) + kfree(data); ret = -EINVAL; goto out_free_data; } diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c b/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c index 4837045ffba37..a53d0c16668a7 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_fs.c @@ -961,6 +961,7 @@ static int mlx5e_create_inner_ttc_table_groups(struct mlx5e_ttc_table *ttc) in = kvzalloc(inlen, GFP_KERNEL); if (!in) { kfree(ft->g); + ft->g = NULL; return -ENOMEM; } @@ -1181,6 +1182,7 @@ static int mlx5e_create_l2_table_groups(struct mlx5e_l2_table *l2_table) in = kvzalloc(inlen, GFP_KERNEL); if (!in) { kfree(ft->g); + ft->g = NULL; return -ENOMEM; } @@ -1226,6 +1228,7 @@ err_destroy_groups: ft->g[ft->num_groups] = NULL; mlx5e_destroy_groups(ft); kvfree(in); + kfree(ft->g); return err; } diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 97c4c301166c5..eef1412c058d3 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1128,7 +1128,10 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign) * accordingly. Otherwise, we should check here. */ if (ctx->drvflags & CDC_NCM_FLAG_NDP_TO_END) - delayed_ndp_size = ALIGN(ctx->max_ndp_size, ctx->tx_ndp_modulus); + delayed_ndp_size = ctx->max_ndp_size + + max_t(u32, + ctx->tx_ndp_modulus, + ctx->tx_modulus + ctx->tx_remainder) - 1; else delayed_ndp_size = 0; @@ -1309,7 +1312,8 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign) if (!(dev->driver_info->flags & FLAG_SEND_ZLP) && skb_out->len > ctx->min_tx_pkt) { padding_count = ctx->tx_curr_size - skb_out->len; - skb_put_zero(skb_out, padding_count); + if (!WARN_ON(padding_count > ctx->tx_curr_size)) + skb_put_zero(skb_out, padding_count); } else if (skb_out->len < ctx->tx_curr_size && (skb_out->len % dev->maxpacket) == 0) { skb_put_u8(skb_out, 0); /* force short packet */ diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 4e9fe75d70675..069f933b0add2 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -295,6 +295,7 @@ config SLIC_DS26522 tristate "Slic Maxim ds26522 card support" depends on SPI depends on FSL_SOC || ARCH_MXC || ARCH_LAYERSCAPE || COMPILE_TEST + select BITREVERSE help This module initializes and configures the slic maxim card in T1 or E1 mode. diff --git a/drivers/net/wireless/ath/wil6210/Kconfig b/drivers/net/wireless/ath/wil6210/Kconfig index b448926b0c0ff..27cef55d17a75 100644 --- a/drivers/net/wireless/ath/wil6210/Kconfig +++ b/drivers/net/wireless/ath/wil6210/Kconfig @@ -1,6 +1,7 @@ config WIL6210 tristate "Wilocity 60g WiFi card wil6210 support" select WANT_DEV_COREDUMP + select CRC32 depends on CFG80211 depends on PCI default n diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 1579eb2bc29f7..06eb7d259b7f5 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1660,7 +1660,7 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) return -ENODEV; } - master = spi_alloc_master(dev, sizeof(struct driver_data)); + master = devm_spi_alloc_master(dev, sizeof(*drv_data)); if (!master) { dev_err(&pdev->dev, "cannot alloc spi_master\n"); pxa_ssp_free(ssp); @@ -1841,7 +1841,6 @@ out_error_clock_enabled: free_irq(ssp->irq, drv_data); out_error_master_alloc: - spi_master_put(master); pxa_ssp_free(ssp); return status; } diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index 179749f354c33..d919803540510 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -299,9 +299,9 @@ static u32 stm32_spi_prepare_fthlv(struct stm32_spi *spi) /* align packet size with data registers access */ if (spi->cur_bpw > 8) - fthlv -= (fthlv % 2); /* multiple of 2 */ + fthlv += (fthlv % 2) ? 1 : 0; else - fthlv -= (fthlv % 4); /* multiple of 4 */ + fthlv += (fthlv % 4) ? (4 - (fthlv % 4)) : 0; return fthlv; } diff --git a/fs/ubifs/io.c b/fs/ubifs/io.c index 135e95950f513..5b4d4b1087c4d 100644 --- a/fs/ubifs/io.c +++ b/fs/ubifs/io.c @@ -331,7 +331,7 @@ void ubifs_pad(const struct ubifs_info *c, void *buf, int pad) { uint32_t crc; - ubifs_assert(pad >= 0 && !(pad & 7)); + ubifs_assert(pad >= 0); if (pad >= UBIFS_PAD_NODE_SZ) { struct ubifs_ch *ch = buf; @@ -727,6 +727,10 @@ int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len) * write-buffer. */ memcpy(wbuf->buf + wbuf->used, buf, len); + if (aligned_len > len) { + ubifs_assert(aligned_len - len < 8); + ubifs_pad(c, wbuf->buf + wbuf->used + len, aligned_len - len); + } if (aligned_len == wbuf->avail) { dbg_io("flush jhead %s wbuf to LEB %d:%d", @@ -819,13 +823,18 @@ int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len) } spin_lock(&wbuf->lock); - if (aligned_len) + if (aligned_len) { /* * And now we have what's left and what does not take whole * max. write unit, so write it to the write-buffer and we are * done. */ memcpy(wbuf->buf, buf + written, len); + if (aligned_len > len) { + ubifs_assert(aligned_len - len < 8); + ubifs_pad(c, wbuf->buf + len, aligned_len - len); + } + } if (c->leb_size - wbuf->offs >= c->max_write_size) wbuf->size = c->max_write_size; diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index cf82d970b0e48..0efdf83f78e7a 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -272,7 +272,8 @@ static int register_vlan_device(struct net_device *real_dev, u16 vlan_id) return 0; out_free_newdev: - if (new_dev->reg_state == NETREG_UNINITIALIZED) + if (new_dev->reg_state == NETREG_UNINITIALIZED || + new_dev->reg_state == NETREG_UNREGISTERED) free_netdev(new_dev); return err; } diff --git a/net/core/skbuff.c b/net/core/skbuff.c index c4f412526dfeb..c062d340cd409 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -1850,6 +1850,12 @@ int pskb_trim_rcsum_slow(struct sk_buff *skb, unsigned int len) skb->csum = csum_block_sub(skb->csum, skb_checksum(skb, len, delta, 0), len); + } else if (skb->ip_summed == CHECKSUM_PARTIAL) { + int hdlen = (len > skb_headlen(skb)) ? skb_headlen(skb) : len; + int offset = skb_checksum_start_offset(skb) + skb->csum_offset; + + if (offset + sizeof(__sum16) > hdlen) + return -EINVAL; } return __pskb_trim(skb, len); } diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 819d51101cbd9..5ec185a9dcaba 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -312,7 +312,7 @@ static int ip_finish_output(struct net *net, struct sock *sk, struct sk_buff *sk if (skb_is_gso(skb)) return ip_finish_output_gso(net, sk, skb, mtu); - if (skb->len > mtu || (IPCB(skb)->flags & IPSKB_FRAG_PMTU)) + if (skb->len > mtu || IPCB(skb)->frag_max_size) return ip_fragment(net, sk, skb, mtu, ip_finish_output2); return ip_finish_output2(net, sk, skb); diff --git a/net/ipv4/ip_tunnel.c b/net/ipv4/ip_tunnel.c index 44cc17c43a6b5..e9cf0d1854595 100644 --- a/net/ipv4/ip_tunnel.c +++ b/net/ipv4/ip_tunnel.c @@ -752,7 +752,11 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, goto tx_error; } - if (tnl_update_pmtu(dev, skb, rt, tnl_params->frag_off, inner_iph)) { + df = tnl_params->frag_off; + if (skb->protocol == htons(ETH_P_IP) && !tunnel->ignore_df) + df |= (inner_iph->frag_off & htons(IP_DF)); + + if (tnl_update_pmtu(dev, skb, rt, df, inner_iph)) { ip_rt_put(rt); goto tx_error; } @@ -780,10 +784,6 @@ void ip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev, ttl = ip4_dst_hoplimit(&rt->dst); } - df = tnl_params->frag_off; - if (skb->protocol == htons(ETH_P_IP) && !tunnel->ignore_df) - df |= (inner_iph->frag_off&htons(IP_DF)); - max_headroom = LL_RESERVED_SPACE(rt->dst.dev) + sizeof(struct iphdr) + rt->dst.header_len + ip_encap_hlen(&tunnel->encap); if (max_headroom > dev->needed_headroom)