From 6bcac8270ce9c08d0a53423d4511f3d3fcb99644 Mon Sep 17 00:00:00 2001 From: Christian Hewitt Date: Fri, 21 Feb 2020 03:40:31 +0000 Subject: [PATCH 087/101] WIP: arm64: dts: meson: khadas-vim3: change LED behaviours on VIM3/3L VIM3/3L have two LEDs (red/white) located 1mm apart on the board. In the current configuration both are powered on creating a pink visual status indication. The boards are also marketed as HTPC devices where heartbeat pulses are distracting and undesirable. This change removes the heartbeat and sets the default state so that only the white LED is on while the board is powered. Signed-off-by: Christian Hewitt --- arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi index 6022805d2032..6d0163f56b0d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi @@ -40,14 +40,14 @@ compatible = "gpio-leds"; led-white { - label = "vim3:white:sys"; - gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; + label = "vim3:white:power"; + gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; }; led-red { label = "vim3:red"; - gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>; + gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>; }; }; -- 2.17.1