diff -Nur a/drivers/w1/Kconfig b/drivers/w1/Kconfig
--- a/drivers/w1/Kconfig	2015-01-27 03:29:32.000000000 +0100
+++ b/drivers/w1/Kconfig	2016-01-31 00:49:00.000000000 +0100
@@ -25,6 +25,32 @@
 	  2. Userspace commands. Includes read/write and search/alarm search commands.
 	  3. Replies to userspace commands.
 
+config W1_SUNXI
+       depends on GPIO_SUNXI
+       tristate "1-wire sunxi support"
+       default n
+       --- help ---
+               This adds a way to register a platform device for 1-wire bus.
+               It introduces a new section "[w1_para]" in the FEX to configure the
+               GPIO pin number used for the bus, with the attribute named "gpio".
+               The GPIO pin must also be defined in the "[gpio_para]" section.
+
+               1-wire device can then be accessed using the w1-gpio driver.
+
+               Example configuration :
+               [w1_para]
+               gpio = 3
+
+               [gpio_para]
+               gpio_used = 1
+               gpio_num = 3
+               ...
+               gpio_pin_3 = port:PH7<0><default><default><0>
+
+               It is also possible to configure the GPIO pin number with the
+               module paramerer "gpio". In this case, if the pin is valid,
+               it will be used instead of what is configured in the FEX script.
+
 source drivers/w1/masters/Kconfig
 source drivers/w1/slaves/Kconfig
 
diff -Nur a/drivers/w1/Makefile b/drivers/w1/Makefile
--- a/drivers/w1/Makefile	2015-01-27 03:29:32.000000000 +0100
+++ b/drivers/w1/Makefile	2016-02-11 18:52:00.000000000 +0100
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_W1)	+= wire.o
+obj-$(CONFIG_W1_SUNXI)	+= w1_sunxi.o
 wire-objs		:= w1.o w1_int.o w1_family.o w1_netlink.o w1_io.o
 
 obj-y			+= masters/ slaves/
diff -Nur a/drivers/w1/w1_sunxi.c b/drivers/w1/w1_sunxi.c
--- a/drivers/w1/w1_sunxi.c	1970-01-01 01:00:00.000000000 +0100
+++ b/drivers/w1/w1_sunxi.c	2016-01-31 00:49:00.000000000 +0100
@@ -0,0 +1,82 @@
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/w1-gpio.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+//#include <plat/sys_config.h>
+#include <mach/sys_config.h>
+#include <mach/platform.h>
+
+static int gpio = -1;
+module_param(gpio, int, 0444);
+MODULE_PARM_DESC(gpio, "w1 gpio pin number");
+
+static struct w1_gpio_platform_data w1_gpio_pdata = {
+    .pin = -1,
+    .is_open_drain = 0,
+};
+
+static void w1_gpio_release(struct device *dev)
+{
+    printk("w1_gpio_release good !\n");
+}
+
+static struct platform_device w1_device = {
+    .name = "w1-gpio",
+    .id = -1,
+    .dev    = {
+            .platform_data  = &w1_gpio_pdata,
+            .release        = w1_gpio_release,
+    }
+};
+
+static int __init w1_sunxi_init(void)
+{
+    int ret;
+    script_item_u val;
+    script_item_value_type_e  type;
+    
+    w1_gpio_pdata.pin = gpio;
+    
+    if (!gpio_is_valid(w1_gpio_pdata.pin)) {
+            // *** We have to determine the pin num from fex definition
+            /*val.val = 0;
+            type = script_get_item("w1_para", "w1_used", &val);
+            if((SCIRPT_ITEM_VALUE_TYPE_INT != type) || (val.val != 1)) {
+                printk(KERN_ERR "W1: not used in fex configuration (%d, %d - %d)\n", type, id, val.val);
+                return -EINVAL;
+            }*/
+        
+            val.val = gpio;
+            type = script_get_item("w1_para", "gpio", &val);
+            if(SCIRPT_ITEM_VALUE_TYPE_INT != type) {
+                printk(KERN_ERR "W1_SUNXI: invalid gpio pin in fex configuration\n");
+                return -EINVAL;
+            }
+            w1_gpio_pdata.pin = val.val;
+            if (!gpio_is_valid(w1_gpio_pdata.pin)) {
+                printk(KERN_ERR "W1_SUNXI: invalid gpio pin in fex configuration %d\n", val.val);
+                return -EINVAL;
+            }
+    }
+    ret = platform_device_register(&w1_device);
+    if (ret) {
+            printk(KERN_ERR "W1_SUNXI: error registering w1-gpio device on GPIO-%d\n", w1_gpio_pdata.pin);
+            return ret;
+    }
+    printk(KERN_INFO "W1_SUNXI: Added w1-gpio on GPIO-%d\n", w1_gpio_pdata.pin);
+    gpio_free(w1_gpio_pdata.pin);
+    return 0;
+}
+
+static void __exit w1_sunxi_exit(void)
+{
+    platform_device_unregister(&w1_device);
+}
+
+module_init(w1_sunxi_init);
+module_exit(w1_sunxi_exit);
+
+MODULE_DESCRIPTION("GPIO w1 sunxi platform device");
+MODULE_AUTHOR("Damien Nicolet <zardam@gmail.com> mod by LoBo <loboris@gmail.com");
+MODULE_LICENSE("GPL");