mirror of
https://github.com/Fishwaldo/build.git
synced 2025-03-28 17:51:40 +00:00
1306 lines
42 KiB
Diff
1306 lines
42 KiB
Diff
diff --git a/Makefile b/Makefile
|
|
index ba5f14d38d8e..8cfcb01fcd7b 100644
|
|
--- a/Makefile
|
|
+++ b/Makefile
|
|
@@ -1,7 +1,7 @@
|
|
# SPDX-License-Identifier: GPL-2.0
|
|
VERSION = 4
|
|
PATCHLEVEL = 19
|
|
-SUBLEVEL = 21
|
|
+SUBLEVEL = 22
|
|
EXTRAVERSION =
|
|
NAME = "People's Front"
|
|
|
|
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
|
|
index 47aa53ba6b92..559659b399d0 100644
|
|
--- a/arch/arm/boot/dts/da850.dtsi
|
|
+++ b/arch/arm/boot/dts/da850.dtsi
|
|
@@ -476,7 +476,7 @@
|
|
clocksource: timer@20000 {
|
|
compatible = "ti,da830-timer";
|
|
reg = <0x20000 0x1000>;
|
|
- interrupts = <12>, <13>;
|
|
+ interrupts = <21>, <22>;
|
|
interrupt-names = "tint12", "tint34";
|
|
clocks = <&pll0_auxclk>;
|
|
};
|
|
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
|
|
index 3b73813c6b04..23e8c93515d4 100644
|
|
--- a/arch/arm/mach-iop32x/n2100.c
|
|
+++ b/arch/arm/mach-iop32x/n2100.c
|
|
@@ -75,8 +75,7 @@ void __init n2100_map_io(void)
|
|
/*
|
|
* N2100 PCI.
|
|
*/
|
|
-static int __init
|
|
-n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
|
+static int n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
int irq;
|
|
|
|
diff --git a/arch/arm/mach-tango/pm.c b/arch/arm/mach-tango/pm.c
|
|
index 028e50c6383f..a32c3b631484 100644
|
|
--- a/arch/arm/mach-tango/pm.c
|
|
+++ b/arch/arm/mach-tango/pm.c
|
|
@@ -3,6 +3,7 @@
|
|
#include <linux/suspend.h>
|
|
#include <asm/suspend.h>
|
|
#include "smc.h"
|
|
+#include "pm.h"
|
|
|
|
static int tango_pm_powerdown(unsigned long arg)
|
|
{
|
|
@@ -24,10 +25,7 @@ static const struct platform_suspend_ops tango_pm_ops = {
|
|
.valid = suspend_valid_only_mem,
|
|
};
|
|
|
|
-static int __init tango_pm_init(void)
|
|
+void __init tango_pm_init(void)
|
|
{
|
|
suspend_set_ops(&tango_pm_ops);
|
|
- return 0;
|
|
}
|
|
-
|
|
-late_initcall(tango_pm_init);
|
|
diff --git a/arch/arm/mach-tango/pm.h b/arch/arm/mach-tango/pm.h
|
|
new file mode 100644
|
|
index 000000000000..35ea705a0ee2
|
|
--- /dev/null
|
|
+++ b/arch/arm/mach-tango/pm.h
|
|
@@ -0,0 +1,7 @@
|
|
+/* SPDX-License-Identifier: GPL-2.0 */
|
|
+
|
|
+#ifdef CONFIG_SUSPEND
|
|
+void __init tango_pm_init(void);
|
|
+#else
|
|
+#define tango_pm_init NULL
|
|
+#endif
|
|
diff --git a/arch/arm/mach-tango/setup.c b/arch/arm/mach-tango/setup.c
|
|
index 677dd7b5efd9..824f90737b04 100644
|
|
--- a/arch/arm/mach-tango/setup.c
|
|
+++ b/arch/arm/mach-tango/setup.c
|
|
@@ -2,6 +2,7 @@
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/hardware/cache-l2x0.h>
|
|
#include "smc.h"
|
|
+#include "pm.h"
|
|
|
|
static void tango_l2c_write(unsigned long val, unsigned int reg)
|
|
{
|
|
@@ -15,4 +16,5 @@ DT_MACHINE_START(TANGO_DT, "Sigma Tango DT")
|
|
.dt_compat = tango_dt_compat,
|
|
.l2c_aux_mask = ~0,
|
|
.l2c_write_sec = tango_l2c_write,
|
|
+ .init_late = tango_pm_init,
|
|
MACHINE_END
|
|
diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
|
|
index 8f5bd04f320a..7f3f136572de 100644
|
|
--- a/arch/mips/kernel/mips-cm.c
|
|
+++ b/arch/mips/kernel/mips-cm.c
|
|
@@ -457,5 +457,5 @@ void mips_cm_error_report(void)
|
|
}
|
|
|
|
/* reprime cause register */
|
|
- write_gcr_error_cause(0);
|
|
+ write_gcr_error_cause(cm_error);
|
|
}
|
|
diff --git a/arch/mips/loongson64/common/reset.c b/arch/mips/loongson64/common/reset.c
|
|
index a60715e11306..b26892ce871c 100644
|
|
--- a/arch/mips/loongson64/common/reset.c
|
|
+++ b/arch/mips/loongson64/common/reset.c
|
|
@@ -59,7 +59,12 @@ static void loongson_poweroff(void)
|
|
{
|
|
#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
|
|
mach_prepare_shutdown();
|
|
- unreachable();
|
|
+
|
|
+ /*
|
|
+ * It needs a wait loop here, but mips/kernel/reset.c already calls
|
|
+ * a generic delay loop, machine_hang(), so simply return.
|
|
+ */
|
|
+ return;
|
|
#else
|
|
void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr;
|
|
|
|
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
|
|
index 5017d5843c5a..fc29b85cfa92 100644
|
|
--- a/arch/mips/pci/pci-octeon.c
|
|
+++ b/arch/mips/pci/pci-octeon.c
|
|
@@ -568,6 +568,11 @@ static int __init octeon_pci_setup(void)
|
|
if (octeon_has_feature(OCTEON_FEATURE_PCIE))
|
|
return 0;
|
|
|
|
+ if (!octeon_is_pci_host()) {
|
|
+ pr_notice("Not in host mode, PCI Controller not initialized\n");
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
/* Point pcibios_map_irq() to the PCI version of it */
|
|
octeon_pcibios_map_irq = octeon_pci_pcibios_map_irq;
|
|
|
|
@@ -579,11 +584,6 @@ static int __init octeon_pci_setup(void)
|
|
else
|
|
octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_BIG;
|
|
|
|
- if (!octeon_is_pci_host()) {
|
|
- pr_notice("Not in host mode, PCI Controller not initialized\n");
|
|
- return 0;
|
|
- }
|
|
-
|
|
/* PCI I/O and PCI MEM values */
|
|
set_io_port_base(OCTEON_PCI_IOSPACE_BASE);
|
|
ioport_resource.start = 0;
|
|
diff --git a/arch/mips/vdso/Makefile b/arch/mips/vdso/Makefile
|
|
index 34605ca21498..6f10312e0c76 100644
|
|
--- a/arch/mips/vdso/Makefile
|
|
+++ b/arch/mips/vdso/Makefile
|
|
@@ -8,6 +8,7 @@ ccflags-vdso := \
|
|
$(filter -E%,$(KBUILD_CFLAGS)) \
|
|
$(filter -mmicromips,$(KBUILD_CFLAGS)) \
|
|
$(filter -march=%,$(KBUILD_CFLAGS)) \
|
|
+ $(filter -m%-float,$(KBUILD_CFLAGS)) \
|
|
-D__VDSO__
|
|
|
|
ifeq ($(cc-name),clang)
|
|
@@ -128,7 +129,7 @@ $(obj)/%-o32.o: $(src)/%.c FORCE
|
|
$(call cmd,force_checksrc)
|
|
$(call if_changed_rule,cc_o_c)
|
|
|
|
-$(obj)/vdso-o32.lds: KBUILD_CPPFLAGS := -mabi=32
|
|
+$(obj)/vdso-o32.lds: KBUILD_CPPFLAGS := $(ccflags-vdso) -mabi=32
|
|
$(obj)/vdso-o32.lds: $(src)/vdso.lds.S FORCE
|
|
$(call if_changed_dep,cpp_lds_S)
|
|
|
|
@@ -168,7 +169,7 @@ $(obj)/%-n32.o: $(src)/%.c FORCE
|
|
$(call cmd,force_checksrc)
|
|
$(call if_changed_rule,cc_o_c)
|
|
|
|
-$(obj)/vdso-n32.lds: KBUILD_CPPFLAGS := -mabi=n32
|
|
+$(obj)/vdso-n32.lds: KBUILD_CPPFLAGS := $(ccflags-vdso) -mabi=n32
|
|
$(obj)/vdso-n32.lds: $(src)/vdso.lds.S FORCE
|
|
$(call if_changed_dep,cpp_lds_S)
|
|
|
|
diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
|
|
index 2a2486526d1f..855dbae6d351 100644
|
|
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
|
|
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
|
|
@@ -1234,21 +1234,13 @@ extern pmd_t pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
|
|
|
|
#define pmd_move_must_withdraw pmd_move_must_withdraw
|
|
struct spinlock;
|
|
-static inline int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
|
|
- struct spinlock *old_pmd_ptl,
|
|
- struct vm_area_struct *vma)
|
|
-{
|
|
- if (radix_enabled())
|
|
- return false;
|
|
- /*
|
|
- * Archs like ppc64 use pgtable to store per pmd
|
|
- * specific information. So when we switch the pmd,
|
|
- * we should also withdraw and deposit the pgtable
|
|
- */
|
|
- return true;
|
|
-}
|
|
-
|
|
-
|
|
+extern int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
|
|
+ struct spinlock *old_pmd_ptl,
|
|
+ struct vm_area_struct *vma);
|
|
+/*
|
|
+ * Hash translation mode use the deposited table to store hash pte
|
|
+ * slot information.
|
|
+ */
|
|
#define arch_needs_pgtable_deposit arch_needs_pgtable_deposit
|
|
static inline bool arch_needs_pgtable_deposit(void)
|
|
{
|
|
diff --git a/arch/powerpc/mm/pgtable-book3s64.c b/arch/powerpc/mm/pgtable-book3s64.c
|
|
index 01d7c0f7c4f0..297db665d953 100644
|
|
--- a/arch/powerpc/mm/pgtable-book3s64.c
|
|
+++ b/arch/powerpc/mm/pgtable-book3s64.c
|
|
@@ -477,3 +477,25 @@ void arch_report_meminfo(struct seq_file *m)
|
|
atomic_long_read(&direct_pages_count[MMU_PAGE_1G]) << 20);
|
|
}
|
|
#endif /* CONFIG_PROC_FS */
|
|
+
|
|
+/*
|
|
+ * For hash translation mode, we use the deposited table to store hash slot
|
|
+ * information and they are stored at PTRS_PER_PMD offset from related pmd
|
|
+ * location. Hence a pmd move requires deposit and withdraw.
|
|
+ *
|
|
+ * For radix translation with split pmd ptl, we store the deposited table in the
|
|
+ * pmd page. Hence if we have different pmd page we need to withdraw during pmd
|
|
+ * move.
|
|
+ *
|
|
+ * With hash we use deposited table always irrespective of anon or not.
|
|
+ * With radix we use deposited table only for anonymous mapping.
|
|
+ */
|
|
+int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
|
|
+ struct spinlock *old_pmd_ptl,
|
|
+ struct vm_area_struct *vma)
|
|
+{
|
|
+ if (radix_enabled())
|
|
+ return (new_pmd_ptl != old_pmd_ptl) && vma_is_anonymous(vma);
|
|
+
|
|
+ return true;
|
|
+}
|
|
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
|
|
index b8c3f9e6af89..adf28788cab5 100644
|
|
--- a/drivers/ata/libata-core.c
|
|
+++ b/drivers/ata/libata-core.c
|
|
@@ -4554,6 +4554,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
|
|
{ "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM, },
|
|
{ "SAMSUNG SSD PM830 mSATA *", "CXM13D1Q", ATA_HORKAGE_NOLPM, },
|
|
{ "SAMSUNG MZ7TD256HAFV-000L9", NULL, ATA_HORKAGE_NOLPM, },
|
|
+ { "SAMSUNG MZ7TE512HMHP-000L1", "EXT06L0Q", ATA_HORKAGE_NOLPM, },
|
|
|
|
/* devices that don't properly handle queued TRIM commands */
|
|
{ "Micron_M500IT_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
|
|
diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c
|
|
index 472c88ae1c0f..92f843eaf1e0 100644
|
|
--- a/drivers/firmware/arm_scmi/bus.c
|
|
+++ b/drivers/firmware/arm_scmi/bus.c
|
|
@@ -119,6 +119,11 @@ void scmi_driver_unregister(struct scmi_driver *driver)
|
|
}
|
|
EXPORT_SYMBOL_GPL(scmi_driver_unregister);
|
|
|
|
+static void scmi_device_release(struct device *dev)
|
|
+{
|
|
+ kfree(to_scmi_dev(dev));
|
|
+}
|
|
+
|
|
struct scmi_device *
|
|
scmi_device_create(struct device_node *np, struct device *parent, int protocol)
|
|
{
|
|
@@ -138,6 +143,7 @@ scmi_device_create(struct device_node *np, struct device *parent, int protocol)
|
|
scmi_dev->dev.parent = parent;
|
|
scmi_dev->dev.of_node = np;
|
|
scmi_dev->dev.bus = &scmi_bus_type;
|
|
+ scmi_dev->dev.release = scmi_device_release;
|
|
dev_set_name(&scmi_dev->dev, "scmi_dev.%d", id);
|
|
|
|
retval = device_register(&scmi_dev->dev);
|
|
@@ -156,9 +162,8 @@ free_mem:
|
|
void scmi_device_destroy(struct scmi_device *scmi_dev)
|
|
{
|
|
scmi_handle_put(scmi_dev->handle);
|
|
- device_unregister(&scmi_dev->dev);
|
|
ida_simple_remove(&scmi_bus_id, scmi_dev->id);
|
|
- kfree(scmi_dev);
|
|
+ device_unregister(&scmi_dev->dev);
|
|
}
|
|
|
|
void scmi_set_handle(struct scmi_device *scmi_dev)
|
|
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c
|
|
index a63e00653324..1546bc49004f 100644
|
|
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c
|
|
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu10_hwmgr.c
|
|
@@ -984,6 +984,7 @@ static int smu10_get_clock_by_type_with_latency(struct pp_hwmgr *hwmgr,
|
|
break;
|
|
case amd_pp_dpp_clock:
|
|
pclk_vol_table = pinfo->vdd_dep_on_dppclk;
|
|
+ break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
|
|
index 02db9ac82d7a..a3104d79b48f 100644
|
|
--- a/drivers/gpu/drm/drm_modes.c
|
|
+++ b/drivers/gpu/drm/drm_modes.c
|
|
@@ -758,7 +758,7 @@ int drm_mode_hsync(const struct drm_display_mode *mode)
|
|
if (mode->hsync)
|
|
return mode->hsync;
|
|
|
|
- if (mode->htotal < 0)
|
|
+ if (mode->htotal <= 0)
|
|
return 0;
|
|
|
|
calc_val = (mode->clock * 1000) / mode->htotal; /* hsync in Hz */
|
|
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
|
|
index c9af34861d9e..b4b1f9ca05b6 100644
|
|
--- a/drivers/gpu/drm/i915/intel_ddi.c
|
|
+++ b/drivers/gpu/drm/i915/intel_ddi.c
|
|
@@ -1085,7 +1085,7 @@ static uint32_t icl_pll_to_ddi_pll_sel(struct intel_encoder *encoder,
|
|
return DDI_CLK_SEL_TBT_810;
|
|
default:
|
|
MISSING_CASE(clock);
|
|
- break;
|
|
+ return DDI_CLK_SEL_NONE;
|
|
}
|
|
case DPLL_ID_ICL_MGPLL1:
|
|
case DPLL_ID_ICL_MGPLL2:
|
|
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
|
|
index bb6dbbe18835..c72b942f2bdf 100644
|
|
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
|
|
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
|
|
@@ -627,13 +627,16 @@ out_fixup:
|
|
static int vmw_dma_masks(struct vmw_private *dev_priv)
|
|
{
|
|
struct drm_device *dev = dev_priv->dev;
|
|
+ int ret = 0;
|
|
|
|
- if (intel_iommu_enabled &&
|
|
+ ret = dma_set_mask_and_coherent(dev->dev, DMA_BIT_MASK(64));
|
|
+ if (dev_priv->map_mode != vmw_dma_phys &&
|
|
(sizeof(unsigned long) == 4 || vmw_restrict_dma_mask)) {
|
|
DRM_INFO("Restricting DMA addresses to 44 bits.\n");
|
|
- return dma_set_mask(dev->dev, DMA_BIT_MASK(44));
|
|
+ return dma_set_mask_and_coherent(dev->dev, DMA_BIT_MASK(44));
|
|
}
|
|
- return 0;
|
|
+
|
|
+ return ret;
|
|
}
|
|
#else
|
|
static int vmw_dma_masks(struct vmw_private *dev_priv)
|
|
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
|
|
index f0ab6b2313bb..c3e2022bda5d 100644
|
|
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
|
|
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
|
|
@@ -3843,7 +3843,7 @@ int vmw_execbuf_fence_commands(struct drm_file *file_priv,
|
|
*p_fence = NULL;
|
|
}
|
|
|
|
- return 0;
|
|
+ return ret;
|
|
}
|
|
|
|
/**
|
|
diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c
|
|
index 031d568b4972..4e339cfd0c54 100644
|
|
--- a/drivers/iio/adc/axp288_adc.c
|
|
+++ b/drivers/iio/adc/axp288_adc.c
|
|
@@ -27,9 +27,18 @@
|
|
#include <linux/iio/machine.h>
|
|
#include <linux/iio/driver.h>
|
|
|
|
-#define AXP288_ADC_EN_MASK 0xF1
|
|
-#define AXP288_ADC_TS_PIN_GPADC 0xF2
|
|
-#define AXP288_ADC_TS_PIN_ON 0xF3
|
|
+/*
|
|
+ * This mask enables all ADCs except for the battery temp-sensor (TS), that is
|
|
+ * left as-is to avoid breaking charging on devices without a temp-sensor.
|
|
+ */
|
|
+#define AXP288_ADC_EN_MASK 0xF0
|
|
+#define AXP288_ADC_TS_ENABLE 0x01
|
|
+
|
|
+#define AXP288_ADC_TS_CURRENT_ON_OFF_MASK GENMASK(1, 0)
|
|
+#define AXP288_ADC_TS_CURRENT_OFF (0 << 0)
|
|
+#define AXP288_ADC_TS_CURRENT_ON_WHEN_CHARGING (1 << 0)
|
|
+#define AXP288_ADC_TS_CURRENT_ON_ONDEMAND (2 << 0)
|
|
+#define AXP288_ADC_TS_CURRENT_ON (3 << 0)
|
|
|
|
enum axp288_adc_id {
|
|
AXP288_ADC_TS,
|
|
@@ -44,6 +53,7 @@ enum axp288_adc_id {
|
|
struct axp288_adc_info {
|
|
int irq;
|
|
struct regmap *regmap;
|
|
+ bool ts_enabled;
|
|
};
|
|
|
|
static const struct iio_chan_spec axp288_adc_channels[] = {
|
|
@@ -115,21 +125,33 @@ static int axp288_adc_read_channel(int *val, unsigned long address,
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
-static int axp288_adc_set_ts(struct regmap *regmap, unsigned int mode,
|
|
- unsigned long address)
|
|
+/*
|
|
+ * The current-source used for the battery temp-sensor (TS) is shared
|
|
+ * with the GPADC. For proper fuel-gauge and charger operation the TS
|
|
+ * current-source needs to be permanently on. But to read the GPADC we
|
|
+ * need to temporary switch the TS current-source to ondemand, so that
|
|
+ * the GPADC can use it, otherwise we will always read an all 0 value.
|
|
+ */
|
|
+static int axp288_adc_set_ts(struct axp288_adc_info *info,
|
|
+ unsigned int mode, unsigned long address)
|
|
{
|
|
int ret;
|
|
|
|
- /* channels other than GPADC do not need to switch TS pin */
|
|
+ /* No need to switch the current-source if the TS pin is disabled */
|
|
+ if (!info->ts_enabled)
|
|
+ return 0;
|
|
+
|
|
+ /* Channels other than GPADC do not need the current source */
|
|
if (address != AXP288_GP_ADC_H)
|
|
return 0;
|
|
|
|
- ret = regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode);
|
|
+ ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL,
|
|
+ AXP288_ADC_TS_CURRENT_ON_OFF_MASK, mode);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* When switching to the GPADC pin give things some time to settle */
|
|
- if (mode == AXP288_ADC_TS_PIN_GPADC)
|
|
+ if (mode == AXP288_ADC_TS_CURRENT_ON_ONDEMAND)
|
|
usleep_range(6000, 10000);
|
|
|
|
return 0;
|
|
@@ -145,14 +167,14 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
|
|
mutex_lock(&indio_dev->mlock);
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
- if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_GPADC,
|
|
+ if (axp288_adc_set_ts(info, AXP288_ADC_TS_CURRENT_ON_ONDEMAND,
|
|
chan->address)) {
|
|
dev_err(&indio_dev->dev, "GPADC mode\n");
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
ret = axp288_adc_read_channel(val, chan->address, info->regmap);
|
|
- if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_ON,
|
|
+ if (axp288_adc_set_ts(info, AXP288_ADC_TS_CURRENT_ON,
|
|
chan->address))
|
|
dev_err(&indio_dev->dev, "TS pin restore\n");
|
|
break;
|
|
@@ -164,13 +186,35 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
|
|
return ret;
|
|
}
|
|
|
|
-static int axp288_adc_set_state(struct regmap *regmap)
|
|
+static int axp288_adc_initialize(struct axp288_adc_info *info)
|
|
{
|
|
- /* ADC should be always enabled for internal FG to function */
|
|
- if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON))
|
|
- return -EIO;
|
|
+ int ret, adc_enable_val;
|
|
+
|
|
+ /*
|
|
+ * Determine if the TS pin is enabled and set the TS current-source
|
|
+ * accordingly.
|
|
+ */
|
|
+ ret = regmap_read(info->regmap, AXP20X_ADC_EN1, &adc_enable_val);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ if (adc_enable_val & AXP288_ADC_TS_ENABLE) {
|
|
+ info->ts_enabled = true;
|
|
+ ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL,
|
|
+ AXP288_ADC_TS_CURRENT_ON_OFF_MASK,
|
|
+ AXP288_ADC_TS_CURRENT_ON);
|
|
+ } else {
|
|
+ info->ts_enabled = false;
|
|
+ ret = regmap_update_bits(info->regmap, AXP288_ADC_TS_PIN_CTRL,
|
|
+ AXP288_ADC_TS_CURRENT_ON_OFF_MASK,
|
|
+ AXP288_ADC_TS_CURRENT_OFF);
|
|
+ }
|
|
+ if (ret)
|
|
+ return ret;
|
|
|
|
- return regmap_write(regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK);
|
|
+ /* Turn on the ADC for all channels except TS, leave TS as is */
|
|
+ return regmap_update_bits(info->regmap, AXP20X_ADC_EN1,
|
|
+ AXP288_ADC_EN_MASK, AXP288_ADC_EN_MASK);
|
|
}
|
|
|
|
static const struct iio_info axp288_adc_iio_info = {
|
|
@@ -200,7 +244,7 @@ static int axp288_adc_probe(struct platform_device *pdev)
|
|
* Set ADC to enabled state at all time, including system suspend.
|
|
* otherwise internal fuel gauge functionality may be affected.
|
|
*/
|
|
- ret = axp288_adc_set_state(axp20x->regmap);
|
|
+ ret = axp288_adc_initialize(info);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "unable to enable ADC device\n");
|
|
return ret;
|
|
diff --git a/drivers/iio/adc/ti-ads8688.c b/drivers/iio/adc/ti-ads8688.c
|
|
index 184d686ebd99..8b4568edd5cb 100644
|
|
--- a/drivers/iio/adc/ti-ads8688.c
|
|
+++ b/drivers/iio/adc/ti-ads8688.c
|
|
@@ -41,6 +41,7 @@
|
|
|
|
#define ADS8688_VREF_MV 4096
|
|
#define ADS8688_REALBITS 16
|
|
+#define ADS8688_MAX_CHANNELS 8
|
|
|
|
/*
|
|
* enum ads8688_range - ADS8688 reference voltage range
|
|
@@ -385,7 +386,7 @@ static irqreturn_t ads8688_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
- u16 buffer[8];
|
|
+ u16 buffer[ADS8688_MAX_CHANNELS + sizeof(s64)/sizeof(u16)];
|
|
int i, j = 0;
|
|
|
|
for (i = 0; i < indio_dev->masklength; i++) {
|
|
diff --git a/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c
|
|
index a406ad31b096..3a20cb5d9bff 100644
|
|
--- a/drivers/iio/chemical/atlas-ph-sensor.c
|
|
+++ b/drivers/iio/chemical/atlas-ph-sensor.c
|
|
@@ -444,9 +444,8 @@ static int atlas_read_raw(struct iio_dev *indio_dev,
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (chan->type) {
|
|
case IIO_TEMP:
|
|
- *val = 1; /* 0.01 */
|
|
- *val2 = 100;
|
|
- break;
|
|
+ *val = 10;
|
|
+ return IIO_VAL_INT;
|
|
case IIO_PH:
|
|
*val = 1; /* 0.001 */
|
|
*val2 = 1000;
|
|
@@ -477,7 +476,7 @@ static int atlas_write_raw(struct iio_dev *indio_dev,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct atlas_data *data = iio_priv(indio_dev);
|
|
- __be32 reg = cpu_to_be32(val);
|
|
+ __be32 reg = cpu_to_be32(val / 10);
|
|
|
|
if (val2 != 0 || val < 0 || val > 20000)
|
|
return -EINVAL;
|
|
diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h
|
|
index 23739a60517f..bb1ee9834a02 100644
|
|
--- a/drivers/misc/mei/hw-me-regs.h
|
|
+++ b/drivers/misc/mei/hw-me-regs.h
|
|
@@ -139,6 +139,8 @@
|
|
#define MEI_DEV_ID_CNP_H 0xA360 /* Cannon Point H */
|
|
#define MEI_DEV_ID_CNP_H_4 0xA364 /* Cannon Point H 4 (iTouch) */
|
|
|
|
+#define MEI_DEV_ID_ICP_LP 0x34E0 /* Ice Lake Point LP */
|
|
+
|
|
/*
|
|
* MEI HW Section
|
|
*/
|
|
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
|
|
index c8e21c894a5f..4299658d48d6 100644
|
|
--- a/drivers/misc/mei/pci-me.c
|
|
+++ b/drivers/misc/mei/pci-me.c
|
|
@@ -105,6 +105,8 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
|
|
{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H, MEI_ME_PCH8_CFG)},
|
|
{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H_4, MEI_ME_PCH8_CFG)},
|
|
|
|
+ {MEI_PCI_DEVICE(MEI_DEV_ID_ICP_LP, MEI_ME_PCH12_CFG)},
|
|
+
|
|
/* required last entry */
|
|
{0, }
|
|
};
|
|
diff --git a/drivers/misc/mic/vop/vop_main.c b/drivers/misc/mic/vop/vop_main.c
|
|
index 3633202e18f4..de7f035a176d 100644
|
|
--- a/drivers/misc/mic/vop/vop_main.c
|
|
+++ b/drivers/misc/mic/vop/vop_main.c
|
|
@@ -563,6 +563,8 @@ static int _vop_remove_device(struct mic_device_desc __iomem *d,
|
|
int ret = -1;
|
|
|
|
if (ioread8(&dc->config_change) == MIC_VIRTIO_PARAM_DEV_REMOVE) {
|
|
+ struct device *dev = get_device(&vdev->vdev.dev);
|
|
+
|
|
dev_dbg(&vpdev->dev,
|
|
"%s %d config_change %d type %d vdev %p\n",
|
|
__func__, __LINE__,
|
|
@@ -574,7 +576,7 @@ static int _vop_remove_device(struct mic_device_desc __iomem *d,
|
|
iowrite8(-1, &dc->h2c_vdev_db);
|
|
if (status & VIRTIO_CONFIG_S_DRIVER_OK)
|
|
wait_for_completion(&vdev->reset_done);
|
|
- put_device(&vdev->vdev.dev);
|
|
+ put_device(dev);
|
|
iowrite8(1, &dc->guest_ack);
|
|
dev_dbg(&vpdev->dev, "%s %d guest_ack %d\n",
|
|
__func__, __LINE__, ioread8(&dc->guest_ack));
|
|
diff --git a/drivers/misc/vexpress-syscfg.c b/drivers/misc/vexpress-syscfg.c
|
|
index 6c3591cdf855..a3c6c773d9dc 100644
|
|
--- a/drivers/misc/vexpress-syscfg.c
|
|
+++ b/drivers/misc/vexpress-syscfg.c
|
|
@@ -61,7 +61,7 @@ static int vexpress_syscfg_exec(struct vexpress_syscfg_func *func,
|
|
int tries;
|
|
long timeout;
|
|
|
|
- if (WARN_ON(index > func->num_templates))
|
|
+ if (WARN_ON(index >= func->num_templates))
|
|
return -EINVAL;
|
|
|
|
command = readl(syscfg->base + SYS_CFGCTRL);
|
|
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
|
|
index 99c460facd5e..0bbb23b014f1 100644
|
|
--- a/drivers/mtd/mtdpart.c
|
|
+++ b/drivers/mtd/mtdpart.c
|
|
@@ -470,6 +470,10 @@ static struct mtd_part *allocate_partition(struct mtd_info *parent,
|
|
/* let's register it anyway to preserve ordering */
|
|
slave->offset = 0;
|
|
slave->mtd.size = 0;
|
|
+
|
|
+ /* Initialize ->erasesize to make add_mtd_device() happy. */
|
|
+ slave->mtd.erasesize = parent->erasesize;
|
|
+
|
|
printk(KERN_ERR"mtd: partition \"%s\" is out of reach -- disabled\n",
|
|
part->name);
|
|
goto out_register;
|
|
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
|
|
index 88ea2203e263..322a008290e5 100644
|
|
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
|
|
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c
|
|
@@ -155,9 +155,10 @@ int gpmi_init(struct gpmi_nand_data *this)
|
|
|
|
/*
|
|
* Reset BCH here, too. We got failures otherwise :(
|
|
- * See later BCH reset for explanation of MX23 handling
|
|
+ * See later BCH reset for explanation of MX23 and MX28 handling
|
|
*/
|
|
- ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
|
|
+ ret = gpmi_reset_block(r->bch_regs,
|
|
+ GPMI_IS_MX23(this) || GPMI_IS_MX28(this));
|
|
if (ret)
|
|
goto err_out;
|
|
|
|
@@ -263,12 +264,10 @@ int bch_set_geometry(struct gpmi_nand_data *this)
|
|
/*
|
|
* Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this
|
|
* chip, otherwise it will lock up. So we skip resetting BCH on the MX23.
|
|
- * On the other hand, the MX28 needs the reset, because one case has been
|
|
- * seen where the BCH produced ECC errors constantly after 10000
|
|
- * consecutive reboots. The latter case has not been seen on the MX23
|
|
- * yet, still we don't know if it could happen there as well.
|
|
+ * and MX28.
|
|
*/
|
|
- ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
|
|
+ ret = gpmi_reset_block(r->bch_regs,
|
|
+ GPMI_IS_MX23(this) || GPMI_IS_MX28(this));
|
|
if (ret)
|
|
goto err_out;
|
|
|
|
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
|
|
index 30f83649c481..8c7bf91ce4e1 100644
|
|
--- a/drivers/mtd/nand/spi/core.c
|
|
+++ b/drivers/mtd/nand/spi/core.c
|
|
@@ -304,24 +304,30 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
|
|
struct nand_device *nand = spinand_to_nand(spinand);
|
|
struct mtd_info *mtd = nanddev_to_mtd(nand);
|
|
struct nand_page_io_req adjreq = *req;
|
|
- unsigned int nbytes = 0;
|
|
- void *buf = NULL;
|
|
+ void *buf = spinand->databuf;
|
|
+ unsigned int nbytes;
|
|
u16 column = 0;
|
|
int ret;
|
|
|
|
- memset(spinand->databuf, 0xff,
|
|
- nanddev_page_size(nand) +
|
|
- nanddev_per_page_oobsize(nand));
|
|
+ /*
|
|
+ * Looks like PROGRAM LOAD (AKA write cache) does not necessarily reset
|
|
+ * the cache content to 0xFF (depends on vendor implementation), so we
|
|
+ * must fill the page cache entirely even if we only want to program
|
|
+ * the data portion of the page, otherwise we might corrupt the BBM or
|
|
+ * user data previously programmed in OOB area.
|
|
+ */
|
|
+ nbytes = nanddev_page_size(nand) + nanddev_per_page_oobsize(nand);
|
|
+ memset(spinand->databuf, 0xff, nbytes);
|
|
+ adjreq.dataoffs = 0;
|
|
+ adjreq.datalen = nanddev_page_size(nand);
|
|
+ adjreq.databuf.out = spinand->databuf;
|
|
+ adjreq.ooblen = nanddev_per_page_oobsize(nand);
|
|
+ adjreq.ooboffs = 0;
|
|
+ adjreq.oobbuf.out = spinand->oobbuf;
|
|
|
|
- if (req->datalen) {
|
|
+ if (req->datalen)
|
|
memcpy(spinand->databuf + req->dataoffs, req->databuf.out,
|
|
req->datalen);
|
|
- adjreq.dataoffs = 0;
|
|
- adjreq.datalen = nanddev_page_size(nand);
|
|
- adjreq.databuf.out = spinand->databuf;
|
|
- nbytes = adjreq.datalen;
|
|
- buf = spinand->databuf;
|
|
- }
|
|
|
|
if (req->ooblen) {
|
|
if (req->mode == MTD_OPS_AUTO_OOB)
|
|
@@ -332,14 +338,6 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
|
|
else
|
|
memcpy(spinand->oobbuf + req->ooboffs, req->oobbuf.out,
|
|
req->ooblen);
|
|
-
|
|
- adjreq.ooblen = nanddev_per_page_oobsize(nand);
|
|
- adjreq.ooboffs = 0;
|
|
- nbytes += nanddev_per_page_oobsize(nand);
|
|
- if (!buf) {
|
|
- buf = spinand->oobbuf;
|
|
- column = nanddev_page_size(nand);
|
|
- }
|
|
}
|
|
|
|
spinand_cache_op_adjust_colum(spinand, &adjreq, &column);
|
|
@@ -370,8 +368,8 @@ static int spinand_write_to_cache_op(struct spinand_device *spinand,
|
|
|
|
/*
|
|
* We need to use the RANDOM LOAD CACHE operation if there's
|
|
- * more than one iteration, because the LOAD operation resets
|
|
- * the cache to 0xff.
|
|
+ * more than one iteration, because the LOAD operation might
|
|
+ * reset the cache to 0xff.
|
|
*/
|
|
if (nbytes) {
|
|
column = op.addr.val;
|
|
@@ -1016,11 +1014,11 @@ static int spinand_init(struct spinand_device *spinand)
|
|
for (i = 0; i < nand->memorg.ntargets; i++) {
|
|
ret = spinand_select_target(spinand, i);
|
|
if (ret)
|
|
- goto err_free_bufs;
|
|
+ goto err_manuf_cleanup;
|
|
|
|
ret = spinand_lock_block(spinand, BL_ALL_UNLOCKED);
|
|
if (ret)
|
|
- goto err_free_bufs;
|
|
+ goto err_manuf_cleanup;
|
|
}
|
|
|
|
ret = nanddev_init(nand, &spinand_ops, THIS_MODULE);
|
|
diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c
|
|
index 6d31ad799987..b7e272d6ae81 100644
|
|
--- a/drivers/pinctrl/intel/pinctrl-cherryview.c
|
|
+++ b/drivers/pinctrl/intel/pinctrl-cherryview.c
|
|
@@ -1524,7 +1524,7 @@ static const struct dmi_system_id chv_no_valid_mask[] = {
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
|
|
DMI_MATCH(DMI_PRODUCT_FAMILY, "Intel_Strago"),
|
|
- DMI_MATCH(DMI_BOARD_VERSION, "1.0"),
|
|
+ DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
|
|
},
|
|
},
|
|
{
|
|
@@ -1532,7 +1532,7 @@ static const struct dmi_system_id chv_no_valid_mask[] = {
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "Setzer"),
|
|
- DMI_MATCH(DMI_BOARD_VERSION, "1.0"),
|
|
+ DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
|
|
},
|
|
},
|
|
{
|
|
@@ -1540,7 +1540,7 @@ static const struct dmi_system_id chv_no_valid_mask[] = {
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "Cyan"),
|
|
- DMI_MATCH(DMI_BOARD_VERSION, "1.0"),
|
|
+ DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
|
|
},
|
|
},
|
|
{
|
|
@@ -1548,7 +1548,7 @@ static const struct dmi_system_id chv_no_valid_mask[] = {
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "Celes"),
|
|
- DMI_MATCH(DMI_BOARD_VERSION, "1.0"),
|
|
+ DMI_MATCH(DMI_PRODUCT_VERSION, "1.0"),
|
|
},
|
|
},
|
|
{}
|
|
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c
|
|
index aa8b58125568..ef4268cc6227 100644
|
|
--- a/drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c
|
|
+++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c
|
|
@@ -588,7 +588,7 @@ static const unsigned int h6_irq_bank_map[] = { 1, 5, 6, 7 };
|
|
static const struct sunxi_pinctrl_desc h6_pinctrl_data = {
|
|
.pins = h6_pins,
|
|
.npins = ARRAY_SIZE(h6_pins),
|
|
- .irq_banks = 3,
|
|
+ .irq_banks = 4,
|
|
.irq_bank_map = h6_irq_bank_map,
|
|
.irq_read_needs_mux = true,
|
|
};
|
|
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
|
|
index 13b01351dd1c..41ef452c1fcf 100644
|
|
--- a/fs/debugfs/inode.c
|
|
+++ b/fs/debugfs/inode.c
|
|
@@ -787,6 +787,13 @@ struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry,
|
|
struct dentry *dentry = NULL, *trap;
|
|
struct name_snapshot old_name;
|
|
|
|
+ if (IS_ERR(old_dir))
|
|
+ return old_dir;
|
|
+ if (IS_ERR(new_dir))
|
|
+ return new_dir;
|
|
+ if (IS_ERR_OR_NULL(old_dentry))
|
|
+ return old_dentry;
|
|
+
|
|
trap = lock_rename(new_dir, old_dir);
|
|
/* Source or destination directories don't exist? */
|
|
if (d_really_is_negative(old_dir) || d_really_is_negative(new_dir))
|
|
diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c
|
|
index 712f00995390..5508baa11bb6 100644
|
|
--- a/fs/ext4/fsync.c
|
|
+++ b/fs/ext4/fsync.c
|
|
@@ -116,16 +116,8 @@ int ext4_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
|
|
goto out;
|
|
}
|
|
|
|
- ret = file_write_and_wait_range(file, start, end);
|
|
- if (ret)
|
|
- return ret;
|
|
-
|
|
if (!journal) {
|
|
- struct writeback_control wbc = {
|
|
- .sync_mode = WB_SYNC_ALL
|
|
- };
|
|
-
|
|
- ret = ext4_write_inode(inode, &wbc);
|
|
+ ret = __generic_file_fsync(file, start, end, datasync);
|
|
if (!ret)
|
|
ret = ext4_sync_parent(inode);
|
|
if (test_opt(inode->i_sb, BARRIER))
|
|
@@ -133,6 +125,9 @@ int ext4_sync_file(struct file *file, loff_t start, loff_t end, int datasync)
|
|
goto out;
|
|
}
|
|
|
|
+ ret = file_write_and_wait_range(file, start, end);
|
|
+ if (ret)
|
|
+ return ret;
|
|
/*
|
|
* data=writeback,ordered:
|
|
* The caller's filemap_fdatawrite()/wait will sync the data.
|
|
diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h
|
|
index 336fd1a19cca..f30bf500888d 100644
|
|
--- a/include/linux/sunrpc/xprt.h
|
|
+++ b/include/linux/sunrpc/xprt.h
|
|
@@ -443,6 +443,11 @@ static inline int xprt_test_and_set_connecting(struct rpc_xprt *xprt)
|
|
return test_and_set_bit(XPRT_CONNECTING, &xprt->state);
|
|
}
|
|
|
|
+static inline int xprt_close_wait(struct rpc_xprt *xprt)
|
|
+{
|
|
+ return test_bit(XPRT_CLOSE_WAIT, &xprt->state);
|
|
+}
|
|
+
|
|
static inline void xprt_set_bound(struct rpc_xprt *xprt)
|
|
{
|
|
test_and_set_bit(XPRT_BOUND, &xprt->state);
|
|
diff --git a/kernel/signal.c b/kernel/signal.c
|
|
index edc28afc9fb4..c187def3dba6 100644
|
|
--- a/kernel/signal.c
|
|
+++ b/kernel/signal.c
|
|
@@ -681,6 +681,48 @@ int dequeue_signal(struct task_struct *tsk, sigset_t *mask, siginfo_t *info)
|
|
return signr;
|
|
}
|
|
|
|
+static int dequeue_synchronous_signal(siginfo_t *info)
|
|
+{
|
|
+ struct task_struct *tsk = current;
|
|
+ struct sigpending *pending = &tsk->pending;
|
|
+ struct sigqueue *q, *sync = NULL;
|
|
+
|
|
+ /*
|
|
+ * Might a synchronous signal be in the queue?
|
|
+ */
|
|
+ if (!((pending->signal.sig[0] & ~tsk->blocked.sig[0]) & SYNCHRONOUS_MASK))
|
|
+ return 0;
|
|
+
|
|
+ /*
|
|
+ * Return the first synchronous signal in the queue.
|
|
+ */
|
|
+ list_for_each_entry(q, &pending->list, list) {
|
|
+ /* Synchronous signals have a postive si_code */
|
|
+ if ((q->info.si_code > SI_USER) &&
|
|
+ (sigmask(q->info.si_signo) & SYNCHRONOUS_MASK)) {
|
|
+ sync = q;
|
|
+ goto next;
|
|
+ }
|
|
+ }
|
|
+ return 0;
|
|
+next:
|
|
+ /*
|
|
+ * Check if there is another siginfo for the same signal.
|
|
+ */
|
|
+ list_for_each_entry_continue(q, &pending->list, list) {
|
|
+ if (q->info.si_signo == sync->info.si_signo)
|
|
+ goto still_pending;
|
|
+ }
|
|
+
|
|
+ sigdelset(&pending->signal, sync->info.si_signo);
|
|
+ recalc_sigpending();
|
|
+still_pending:
|
|
+ list_del_init(&sync->list);
|
|
+ copy_siginfo(info, &sync->info);
|
|
+ __sigqueue_free(sync);
|
|
+ return info->si_signo;
|
|
+}
|
|
+
|
|
/*
|
|
* Tell a process that it has a new active signal..
|
|
*
|
|
@@ -2390,6 +2432,11 @@ relock:
|
|
goto relock;
|
|
}
|
|
|
|
+ /* Has this task already been marked for death? */
|
|
+ ksig->info.si_signo = signr = SIGKILL;
|
|
+ if (signal_group_exit(signal))
|
|
+ goto fatal;
|
|
+
|
|
for (;;) {
|
|
struct k_sigaction *ka;
|
|
|
|
@@ -2403,7 +2450,15 @@ relock:
|
|
goto relock;
|
|
}
|
|
|
|
- signr = dequeue_signal(current, ¤t->blocked, &ksig->info);
|
|
+ /*
|
|
+ * Signals generated by the execution of an instruction
|
|
+ * need to be delivered before any other pending signals
|
|
+ * so that the instruction pointer in the signal stack
|
|
+ * frame points to the faulting instruction.
|
|
+ */
|
|
+ signr = dequeue_synchronous_signal(&ksig->info);
|
|
+ if (!signr)
|
|
+ signr = dequeue_signal(current, ¤t->blocked, &ksig->info);
|
|
|
|
if (!signr)
|
|
break; /* will return 0 */
|
|
@@ -2485,6 +2540,7 @@ relock:
|
|
continue;
|
|
}
|
|
|
|
+ fatal:
|
|
spin_unlock_irq(&sighand->siglock);
|
|
|
|
/*
|
|
diff --git a/kernel/trace/trace_uprobe.c b/kernel/trace/trace_uprobe.c
|
|
index e696667da29a..a6aebbc848fe 100644
|
|
--- a/kernel/trace/trace_uprobe.c
|
|
+++ b/kernel/trace/trace_uprobe.c
|
|
@@ -5,7 +5,7 @@
|
|
* Copyright (C) IBM Corporation, 2010-2012
|
|
* Author: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
|
|
*/
|
|
-#define pr_fmt(fmt) "trace_kprobe: " fmt
|
|
+#define pr_fmt(fmt) "trace_uprobe: " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/uaccess.h>
|
|
diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c
|
|
index 2f0d42f2f913..08690d06b7be 100644
|
|
--- a/net/batman-adv/hard-interface.c
|
|
+++ b/net/batman-adv/hard-interface.c
|
|
@@ -20,7 +20,6 @@
|
|
#include "main.h"
|
|
|
|
#include <linux/atomic.h>
|
|
-#include <linux/bug.h>
|
|
#include <linux/byteorder/generic.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/gfp.h>
|
|
@@ -179,8 +178,10 @@ static bool batadv_is_on_batman_iface(const struct net_device *net_dev)
|
|
parent_dev = __dev_get_by_index((struct net *)parent_net,
|
|
dev_get_iflink(net_dev));
|
|
/* if we got a NULL parent_dev there is something broken.. */
|
|
- if (WARN(!parent_dev, "Cannot find parent device"))
|
|
+ if (!parent_dev) {
|
|
+ pr_err("Cannot find parent device\n");
|
|
return false;
|
|
+ }
|
|
|
|
if (batadv_mutual_parents(net_dev, net, parent_dev, parent_net))
|
|
return false;
|
|
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
|
|
index 626ddca332db..3899fa6e201d 100644
|
|
--- a/net/batman-adv/soft-interface.c
|
|
+++ b/net/batman-adv/soft-interface.c
|
|
@@ -221,6 +221,8 @@ static netdev_tx_t batadv_interface_tx(struct sk_buff *skb,
|
|
|
|
netif_trans_update(soft_iface);
|
|
vid = batadv_get_vid(skb, 0);
|
|
+
|
|
+ skb_reset_mac_header(skb);
|
|
ethhdr = eth_hdr(skb);
|
|
|
|
switch (ntohs(ethhdr->h_proto)) {
|
|
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
|
|
index 9a1c27c61de8..a127d1442116 100644
|
|
--- a/net/ceph/messenger.c
|
|
+++ b/net/ceph/messenger.c
|
|
@@ -3240,9 +3240,10 @@ void ceph_con_keepalive(struct ceph_connection *con)
|
|
dout("con_keepalive %p\n", con);
|
|
mutex_lock(&con->mutex);
|
|
clear_standby(con);
|
|
+ con_flag_set(con, CON_FLAG_KEEPALIVE_PENDING);
|
|
mutex_unlock(&con->mutex);
|
|
- if (con_flag_test_and_set(con, CON_FLAG_KEEPALIVE_PENDING) == 0 &&
|
|
- con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0)
|
|
+
|
|
+ if (con_flag_test_and_set(con, CON_FLAG_WRITE_PENDING) == 0)
|
|
queue_con(con);
|
|
}
|
|
EXPORT_SYMBOL(ceph_con_keepalive);
|
|
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
|
|
index 995a491f73a9..c7ccd7b71b15 100644
|
|
--- a/net/mac80211/tx.c
|
|
+++ b/net/mac80211/tx.c
|
|
@@ -1913,9 +1913,16 @@ static int ieee80211_skb_resize(struct ieee80211_sub_if_data *sdata,
|
|
int head_need, bool may_encrypt)
|
|
{
|
|
struct ieee80211_local *local = sdata->local;
|
|
+ struct ieee80211_hdr *hdr;
|
|
+ bool enc_tailroom;
|
|
int tail_need = 0;
|
|
|
|
- if (may_encrypt && sdata->crypto_tx_tailroom_needed_cnt) {
|
|
+ hdr = (struct ieee80211_hdr *) skb->data;
|
|
+ enc_tailroom = may_encrypt &&
|
|
+ (sdata->crypto_tx_tailroom_needed_cnt ||
|
|
+ ieee80211_is_mgmt(hdr->frame_control));
|
|
+
|
|
+ if (enc_tailroom) {
|
|
tail_need = IEEE80211_ENCRYPT_TAILROOM;
|
|
tail_need -= skb_tailroom(skb);
|
|
tail_need = max_t(int, tail_need, 0);
|
|
@@ -1923,8 +1930,7 @@ static int ieee80211_skb_resize(struct ieee80211_sub_if_data *sdata,
|
|
|
|
if (skb_cloned(skb) &&
|
|
(!ieee80211_hw_check(&local->hw, SUPPORTS_CLONED_SKBS) ||
|
|
- !skb_clone_writable(skb, ETH_HLEN) ||
|
|
- (may_encrypt && sdata->crypto_tx_tailroom_needed_cnt)))
|
|
+ !skb_clone_writable(skb, ETH_HLEN) || enc_tailroom))
|
|
I802_DEBUG_INC(local->tx_expand_skb_head_cloned);
|
|
else if (head_need || tail_need)
|
|
I802_DEBUG_INC(local->tx_expand_skb_head);
|
|
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
|
|
index 8ea2f5fadd96..1fc812ba9871 100644
|
|
--- a/net/sunrpc/clnt.c
|
|
+++ b/net/sunrpc/clnt.c
|
|
@@ -1992,13 +1992,15 @@ call_transmit(struct rpc_task *task)
|
|
static void
|
|
call_transmit_status(struct rpc_task *task)
|
|
{
|
|
+ struct rpc_xprt *xprt = task->tk_rqstp->rq_xprt;
|
|
task->tk_action = call_status;
|
|
|
|
/*
|
|
* Common case: success. Force the compiler to put this
|
|
- * test first.
|
|
+ * test first. Or, if any error and xprt_close_wait,
|
|
+ * release the xprt lock so the socket can close.
|
|
*/
|
|
- if (task->tk_status == 0) {
|
|
+ if (task->tk_status == 0 || xprt_close_wait(xprt)) {
|
|
xprt_end_transmit(task);
|
|
rpc_task_force_reencode(task);
|
|
return;
|
|
diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
|
|
index 8602a5f1b515..e8ad7ddf347a 100644
|
|
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
|
|
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
|
|
@@ -563,6 +563,99 @@ void svc_rdma_sync_reply_hdr(struct svcxprt_rdma *rdma,
|
|
DMA_TO_DEVICE);
|
|
}
|
|
|
|
+/* If the xdr_buf has more elements than the device can
|
|
+ * transmit in a single RDMA Send, then the reply will
|
|
+ * have to be copied into a bounce buffer.
|
|
+ */
|
|
+static bool svc_rdma_pull_up_needed(struct svcxprt_rdma *rdma,
|
|
+ struct xdr_buf *xdr,
|
|
+ __be32 *wr_lst)
|
|
+{
|
|
+ int elements;
|
|
+
|
|
+ /* xdr->head */
|
|
+ elements = 1;
|
|
+
|
|
+ /* xdr->pages */
|
|
+ if (!wr_lst) {
|
|
+ unsigned int remaining;
|
|
+ unsigned long pageoff;
|
|
+
|
|
+ pageoff = xdr->page_base & ~PAGE_MASK;
|
|
+ remaining = xdr->page_len;
|
|
+ while (remaining) {
|
|
+ ++elements;
|
|
+ remaining -= min_t(u32, PAGE_SIZE - pageoff,
|
|
+ remaining);
|
|
+ pageoff = 0;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ /* xdr->tail */
|
|
+ if (xdr->tail[0].iov_len)
|
|
+ ++elements;
|
|
+
|
|
+ /* assume 1 SGE is needed for the transport header */
|
|
+ return elements >= rdma->sc_max_send_sges;
|
|
+}
|
|
+
|
|
+/* The device is not capable of sending the reply directly.
|
|
+ * Assemble the elements of @xdr into the transport header
|
|
+ * buffer.
|
|
+ */
|
|
+static int svc_rdma_pull_up_reply_msg(struct svcxprt_rdma *rdma,
|
|
+ struct svc_rdma_send_ctxt *ctxt,
|
|
+ struct xdr_buf *xdr, __be32 *wr_lst)
|
|
+{
|
|
+ unsigned char *dst, *tailbase;
|
|
+ unsigned int taillen;
|
|
+
|
|
+ dst = ctxt->sc_xprt_buf;
|
|
+ dst += ctxt->sc_sges[0].length;
|
|
+
|
|
+ memcpy(dst, xdr->head[0].iov_base, xdr->head[0].iov_len);
|
|
+ dst += xdr->head[0].iov_len;
|
|
+
|
|
+ tailbase = xdr->tail[0].iov_base;
|
|
+ taillen = xdr->tail[0].iov_len;
|
|
+ if (wr_lst) {
|
|
+ u32 xdrpad;
|
|
+
|
|
+ xdrpad = xdr_padsize(xdr->page_len);
|
|
+ if (taillen && xdrpad) {
|
|
+ tailbase += xdrpad;
|
|
+ taillen -= xdrpad;
|
|
+ }
|
|
+ } else {
|
|
+ unsigned int len, remaining;
|
|
+ unsigned long pageoff;
|
|
+ struct page **ppages;
|
|
+
|
|
+ ppages = xdr->pages + (xdr->page_base >> PAGE_SHIFT);
|
|
+ pageoff = xdr->page_base & ~PAGE_MASK;
|
|
+ remaining = xdr->page_len;
|
|
+ while (remaining) {
|
|
+ len = min_t(u32, PAGE_SIZE - pageoff, remaining);
|
|
+
|
|
+ memcpy(dst, page_address(*ppages), len);
|
|
+ remaining -= len;
|
|
+ dst += len;
|
|
+ pageoff = 0;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if (taillen)
|
|
+ memcpy(dst, tailbase, taillen);
|
|
+
|
|
+ ctxt->sc_sges[0].length += xdr->len;
|
|
+ ib_dma_sync_single_for_device(rdma->sc_pd->device,
|
|
+ ctxt->sc_sges[0].addr,
|
|
+ ctxt->sc_sges[0].length,
|
|
+ DMA_TO_DEVICE);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
/* svc_rdma_map_reply_msg - Map the buffer holding RPC message
|
|
* @rdma: controlling transport
|
|
* @ctxt: send_ctxt for the Send WR
|
|
@@ -585,8 +678,10 @@ int svc_rdma_map_reply_msg(struct svcxprt_rdma *rdma,
|
|
u32 xdr_pad;
|
|
int ret;
|
|
|
|
- if (++ctxt->sc_cur_sge_no >= rdma->sc_max_send_sges)
|
|
- return -EIO;
|
|
+ if (svc_rdma_pull_up_needed(rdma, xdr, wr_lst))
|
|
+ return svc_rdma_pull_up_reply_msg(rdma, ctxt, xdr, wr_lst);
|
|
+
|
|
+ ++ctxt->sc_cur_sge_no;
|
|
ret = svc_rdma_dma_map_buf(rdma, ctxt,
|
|
xdr->head[0].iov_base,
|
|
xdr->head[0].iov_len);
|
|
@@ -617,8 +712,7 @@ int svc_rdma_map_reply_msg(struct svcxprt_rdma *rdma,
|
|
while (remaining) {
|
|
len = min_t(u32, PAGE_SIZE - page_off, remaining);
|
|
|
|
- if (++ctxt->sc_cur_sge_no >= rdma->sc_max_send_sges)
|
|
- return -EIO;
|
|
+ ++ctxt->sc_cur_sge_no;
|
|
ret = svc_rdma_dma_map_page(rdma, ctxt, *ppages++,
|
|
page_off, len);
|
|
if (ret < 0)
|
|
@@ -632,8 +726,7 @@ int svc_rdma_map_reply_msg(struct svcxprt_rdma *rdma,
|
|
len = xdr->tail[0].iov_len;
|
|
tail:
|
|
if (len) {
|
|
- if (++ctxt->sc_cur_sge_no >= rdma->sc_max_send_sges)
|
|
- return -EIO;
|
|
+ ++ctxt->sc_cur_sge_no;
|
|
ret = svc_rdma_dma_map_buf(rdma, ctxt, base, len);
|
|
if (ret < 0)
|
|
return ret;
|
|
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
|
|
index 2848cafd4a17..ce5c610b49c7 100644
|
|
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
|
|
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
|
|
@@ -475,13 +475,12 @@ static struct svc_xprt *svc_rdma_accept(struct svc_xprt *xprt)
|
|
|
|
/* Qualify the transport resource defaults with the
|
|
* capabilities of this particular device */
|
|
- newxprt->sc_max_send_sges = dev->attrs.max_send_sge;
|
|
- /* transport hdr, head iovec, one page list entry, tail iovec */
|
|
- if (newxprt->sc_max_send_sges < 4) {
|
|
- pr_err("svcrdma: too few Send SGEs available (%d)\n",
|
|
- newxprt->sc_max_send_sges);
|
|
- goto errout;
|
|
- }
|
|
+ /* Transport header, head iovec, tail iovec */
|
|
+ newxprt->sc_max_send_sges = 3;
|
|
+ /* Add one SGE per page list entry */
|
|
+ newxprt->sc_max_send_sges += (svcrdma_max_req_size / PAGE_SIZE) + 1;
|
|
+ if (newxprt->sc_max_send_sges > dev->attrs.max_send_sge)
|
|
+ newxprt->sc_max_send_sges = dev->attrs.max_send_sge;
|
|
newxprt->sc_max_req_size = svcrdma_max_req_size;
|
|
newxprt->sc_max_requests = svcrdma_max_requests;
|
|
newxprt->sc_max_bc_requests = svcrdma_max_bc_requests;
|
|
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
|
|
index 119a427d9b2b..6ea8036fcdbe 100644
|
|
--- a/net/xfrm/xfrm_policy.c
|
|
+++ b/net/xfrm/xfrm_policy.c
|
|
@@ -1628,7 +1628,10 @@ static struct dst_entry *xfrm_bundle_create(struct xfrm_policy *policy,
|
|
dst_copy_metrics(dst1, dst);
|
|
|
|
if (xfrm[i]->props.mode != XFRM_MODE_TRANSPORT) {
|
|
- __u32 mark = xfrm_smark_get(fl->flowi_mark, xfrm[i]);
|
|
+ __u32 mark = 0;
|
|
+
|
|
+ if (xfrm[i]->props.smark.v || xfrm[i]->props.smark.m)
|
|
+ mark = xfrm_smark_get(fl->flowi_mark, xfrm[i]);
|
|
|
|
family = xfrm[i]->props.family;
|
|
dst = xfrm_dst_lookup(xfrm[i], tos, fl->flowi_oif,
|
|
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
|
|
index 566919838d5e..ab557827aac0 100644
|
|
--- a/net/xfrm/xfrm_user.c
|
|
+++ b/net/xfrm/xfrm_user.c
|
|
@@ -1488,10 +1488,15 @@ static int validate_tmpl(int nr, struct xfrm_user_tmpl *ut, u16 family)
|
|
if (!ut[i].family)
|
|
ut[i].family = family;
|
|
|
|
- if ((ut[i].mode == XFRM_MODE_TRANSPORT) &&
|
|
- (ut[i].family != prev_family))
|
|
- return -EINVAL;
|
|
-
|
|
+ switch (ut[i].mode) {
|
|
+ case XFRM_MODE_TUNNEL:
|
|
+ case XFRM_MODE_BEET:
|
|
+ break;
|
|
+ default:
|
|
+ if (ut[i].family != prev_family)
|
|
+ return -EINVAL;
|
|
+ break;
|
|
+ }
|
|
if (ut[i].mode >= XFRM_MODE_MAX)
|
|
return -EINVAL;
|
|
|
|
diff --git a/samples/mei/mei-amt-version.c b/samples/mei/mei-amt-version.c
|
|
index 57d0d871dcf7..bb9988914a56 100644
|
|
--- a/samples/mei/mei-amt-version.c
|
|
+++ b/samples/mei/mei-amt-version.c
|
|
@@ -117,7 +117,7 @@ static bool mei_init(struct mei *me, const uuid_le *guid,
|
|
|
|
me->verbose = verbose;
|
|
|
|
- me->fd = open("/dev/mei", O_RDWR);
|
|
+ me->fd = open("/dev/mei0", O_RDWR);
|
|
if (me->fd == -1) {
|
|
mei_err(me, "Cannot establish a handle to the Intel MEI driver\n");
|
|
goto err;
|
|
diff --git a/tools/iio/iio_generic_buffer.c b/tools/iio/iio_generic_buffer.c
|
|
index 3040830d7797..84545666a09c 100644
|
|
--- a/tools/iio/iio_generic_buffer.c
|
|
+++ b/tools/iio/iio_generic_buffer.c
|
|
@@ -330,7 +330,7 @@ static const struct option longopts[] = {
|
|
|
|
int main(int argc, char **argv)
|
|
{
|
|
- unsigned long long num_loops = 2;
|
|
+ long long num_loops = 2;
|
|
unsigned long timedelay = 1000000;
|
|
unsigned long buf_len = 128;
|
|
|