mirror of
https://github.com/Fishwaldo/build.git
synced 2025-07-23 13:29:33 +00:00
1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
33 lines
1.4 KiB
Diff
33 lines
1.4 KiB
Diff
diff --git a/configs/nanopi_neo_defconfig b/configs/nanopi_neo_defconfig
|
|
index ed30708f90..f87148c7e6 100644
|
|
--- a/configs/nanopi_neo_defconfig
|
|
+++ b/configs/nanopi_neo_defconfig
|
|
@@ -9,5 +9,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo"
|
|
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
|
CONFIG_CONSOLE_MUX=y
|
|
+CONFIG_SYS_CLK_FREQ=480000000
|
|
# CONFIG_CMD_FLASH is not set
|
|
# CONFIG_SPL_DOS_PARTITION is not set
|
|
# CONFIG_SPL_EFI_PARTITION is not set
|
|
diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
|
|
index 11eb3ab13b..d8f3f75192 100644
|
|
--- a/configs/nanopi_neo_air_defconfig
|
|
+++ b/configs/nanopi_neo_air_defconfig
|
|
@@ -9,5 +9,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air"
|
|
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
|
CONFIG_CONSOLE_MUX=y
|
|
+CONFIG_SYS_CLK_FREQ=480000000
|
|
# CONFIG_CMD_FLASH is not set
|
|
# CONFIG_SPL_DOS_PARTITION is not set
|
|
# CONFIG_SPL_EFI_PARTITION is not set
|
|
diff --git a/configs/orangepi_zero_defconfig b/configs/orangepi_zero_defconfig
|
|
index 5792e7a4a3..46805991d2 100644
|
|
--- a/configs/orangepi_zero_defconfig
|
|
+++ b/configs/orangepi_zero_defconfig
|
|
@@ -9,5 +9,6 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-zero"
|
|
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
|
CONFIG_CONSOLE_MUX=y
|
|
+CONFIG_SYS_CLK_FREQ=480000000
|
|
# CONFIG_CMD_FLASH is not set
|
|
# CONFIG_SPL_DOS_PARTITION is not set
|
|
# CONFIG_SPL_EFI_PARTITION is not set
|