mirror of
https://github.com/Fishwaldo/build.git
synced 2025-03-22 23:01:56 +00:00
80 lines
2 KiB
Diff
80 lines
2 KiB
Diff
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
|
|
index 93b8dd6be..bf9b9af71 100644
|
|
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
|
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
|
|
@@ -48,11 +48,19 @@
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
+#include <dt-bindings/pinctrl/sun4i-a10.h>
|
|
|
|
/ {
|
|
model = "Xunlong Orange Pi Prime";
|
|
compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
|
|
|
|
+ reg_vcc3v3: vcc3v3 {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc3v3";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ };
|
|
+
|
|
aliases {
|
|
ethernet0 = &emac;
|
|
serial0 = &uart0;
|
|
@@ -109,13 +117,6 @@
|
|
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
- reg_vcc3v3: vcc3v3 {
|
|
- compatible = "regulator-fixed";
|
|
- regulator-name = "vcc3v3";
|
|
- regulator-min-microvolt = <3300000>;
|
|
- regulator-max-microvolt = <3300000>;
|
|
- };
|
|
-
|
|
reg_usb0_vbus: usb0-vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb0-vbus";
|
|
@@ -132,6 +133,10 @@
|
|
};
|
|
};
|
|
|
|
+&cpu0 {
|
|
+ cpu-supply = <®_vdd_cpux>;
|
|
+};
|
|
+
|
|
&codec {
|
|
allwinner,audio-routing =
|
|
"Line Out", "LINEOUT",
|
|
@@ -226,6 +231,30 @@
|
|
&ohci3 {
|
|
status = "okay";
|
|
};
|
|
+&r_i2c {
|
|
+ status = "okay";
|
|
+
|
|
+ reg_vdd_cpux: regulator@65 {
|
|
+ compatible = "silergy,sy8106a";
|
|
+ reg = <0x65>;
|
|
+ regulator-name = "vdd-cpux";
|
|
+ silergy,fixed-microvolt = <1200000>;
|
|
+ /*
|
|
+ * The datasheet uses 1.1V as the minimum value of VDD-CPUX,
|
|
+ * however both the Armbian DVFS table and the official one
|
|
+ * have operating points with voltage under 1.1V, and both
|
|
+ * DVFS table are known to work properly at the lowest
|
|
+ * operating point.
|
|
+ *
|
|
+ * Use 1.0V as the minimum voltage instead.
|
|
+ */
|
|
+ regulator-min-microvolt = <1000000>;
|
|
+ regulator-max-microvolt = <1400000>;
|
|
+ regulator-ramp-delay = <200>;
|
|
+ regulator-boot-on;
|
|
+ regulator-always-on;
|
|
+ };
|
|
+};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|