mirror of
https://github.com/Fishwaldo/build.git
synced 2025-07-24 05:48:41 +00:00
1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
60 lines
1.5 KiB
Diff
60 lines
1.5 KiB
Diff
diff --git a/configs/orangepi_win_defconfig b/configs/orangepi_win_defconfig
|
|
index a3e278f..39e83f1 100644
|
|
--- a/configs/orangepi_win_defconfig
|
|
+++ b/configs/orangepi_win_defconfig
|
|
@@ -12,6 +12,9 @@ CONFIG_SPL=y
|
|
# CONFIG_CMD_FLASH is not set
|
|
# CONFIG_SPL_DOS_PARTITION is not set
|
|
# CONFIG_SPL_EFI_PARTITION is not set
|
|
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
|
+CONFIG_USB1_VBUS_PIN="PD7"
|
|
+CONFIG_USB_HOST=y
|
|
CONFIG_SUN8I_EMAC=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
|
|
diff --git a/arch/arm/dts/sun50i-a64-orangepi-win.dts b/arch/arm/dts/sun50i-a64-orangepi-win.dts
|
|
index cf76c35..a7d36a5 100644
|
|
--- a/arch/arm/dts/sun50i-a64-orangepi-win.dts
|
|
+++ b/arch/arm/dts/sun50i-a64-orangepi-win.dts
|
|
@@ -64,6 +64,19 @@
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
+
|
|
+ reg_usb1_vbus: usb1-vbus {
|
|
+ compatible = "regulator-fixed";
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&usb1_vbus_pin_opiwin>;
|
|
+ regulator-name = "usb1-vbus";
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ regulator-boot-on;
|
|
+ enable-active-high;
|
|
+ gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>;
|
|
+ status = "okay";
|
|
+ };
|
|
};
|
|
|
|
&ehci1 {
|
|
@@ -83,6 +96,13 @@
|
|
status = "okay";
|
|
};
|
|
|
|
+&pio {
|
|
+ usb1_vbus_pin_opiwin: usb1_vbus_pin@0 {
|
|
+ allwinner,pins = "PD7";
|
|
+ allwinner,function = "gpio_out";
|
|
+ };
|
|
+};
|
|
+
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins_a>;
|
|
@@ -90,5 +112,6 @@
|
|
};
|
|
|
|
&usbphy {
|
|
- status = "okay";
|
|
+ usb1_vbus-supply = <®_usb1_vbus>;
|
|
+ status = "okay";
|
|
};
|