mirror of
https://github.com/Fishwaldo/build.git
synced 2025-07-23 13:29:33 +00:00
1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
247 lines
5.4 KiB
Diff
247 lines
5.4 KiB
Diff
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
|
|
index a9797d233..4972f2901
|
|
--- a/arch/arm64/boot/dts/allwinner/Makefile
|
|
+++ b/arch/arm64/boot/dts/allwinner/Makefile
|
|
@@ -1,6 +1,7 @@
|
|
# SPDX-License-Identifier: GPL-2.0
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
|
|
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-lite2.dtb
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
|
|
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
|
|
new file mode 100644
|
|
index 000000000..b9aff606e
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-lite2.dts
|
|
@@ -0,0 +1,229 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
|
|
+/*
|
|
+ * Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io>
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include "sun50i-h6.dtsi"
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+
|
|
+/ {
|
|
+ model = "Orange Pi Lite 2";
|
|
+ compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
|
|
+
|
|
+ aliases {
|
|
+ serial0 = &uart0;
|
|
+ };
|
|
+
|
|
+ chosen {
|
|
+ stdout-path = "serial0:115200n8";
|
|
+ };
|
|
+
|
|
+ reg_vcc3v3: vcc3v3 {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc3v3";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ };
|
|
+
|
|
+ reg_vcc1v8: vcc1v8 {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc1v8";
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ };
|
|
+
|
|
+ reg_usb_vbus: vbus {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "usb-vbus";
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ startup-delay-us = <100000>;
|
|
+ gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>;
|
|
+ enable-active-high;
|
|
+ };
|
|
+};
|
|
+
|
|
+&cpu0 {
|
|
+ cpu-supply = <®_dcdca>;
|
|
+};
|
|
+
|
|
+&dwc3 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ehci0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ehci3 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&mmc0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&mmc0_pins>;
|
|
+ vmmc-supply = <®_vcc3v3>;
|
|
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&mmc2 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&mmc2_pins>;
|
|
+ vmmc-supply = <®_vcc3v3>;
|
|
+ vqmmc-supply = <®_vcc1v8>;
|
|
+ non-removable;
|
|
+ cap-mmc-hw-reset;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ohci0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ohci3 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&r_i2c {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&r_i2c_pins>;
|
|
+ status = "okay";
|
|
+
|
|
+ axp805: pmic@36 {
|
|
+ compatible = "x-powers,axp805";
|
|
+ reg = <0x36>;
|
|
+ interrupt-parent = <&r_intc>;
|
|
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
+ interrupt-controller;
|
|
+ #interrupt-cells = <1>;
|
|
+ x-powers,master-mode;
|
|
+
|
|
+ regulators {
|
|
+ reg_aldo1: aldo1 {
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-name = "vcc-pl";
|
|
+ };
|
|
+
|
|
+ reg_aldo2: aldo2 {
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-name = "vcc-ac200";
|
|
+ };
|
|
+
|
|
+ reg_aldo3: aldo3 {
|
|
+ /* This regulator is connected with CLDO1 */
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-name = "vcc-3v3-1";
|
|
+ };
|
|
+
|
|
+ reg_bldo1: bldo1 {
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-name = "vcc-ddr-bias-pll";
|
|
+ };
|
|
+
|
|
+ reg_bldo2: bldo2 {
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-name = "vcc-efuse-emmc-pcie-hdmi";
|
|
+ };
|
|
+
|
|
+ reg_bldo3: bldo3 {
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-name = "vcc-wifi-io";
|
|
+ };
|
|
+
|
|
+ bldo4 {
|
|
+ /* unused */
|
|
+ };
|
|
+
|
|
+ reg_cldo1: cldo1 {
|
|
+ /* This regulator is connected with ALDO3 */
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-name = "vcc-3v3-2";
|
|
+ };
|
|
+
|
|
+ reg_cldo2: cldo2 {
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-name = "vcc-wifi-1";
|
|
+ };
|
|
+
|
|
+ reg_cldo3: cldo3 {
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-name = "vcc-wifi-2";
|
|
+ };
|
|
+
|
|
+ reg_dcdca: dcdca {
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <810000>;
|
|
+ regulator-max-microvolt = <1080000>;
|
|
+ regulator-name = "vdd-cpu";
|
|
+ };
|
|
+
|
|
+ reg_dcdcc: dcdcc {
|
|
+ regulator-min-microvolt = <810000>;
|
|
+ regulator-max-microvolt = <1080000>;
|
|
+ regulator-name = "vdd-gpu";
|
|
+ };
|
|
+
|
|
+ reg_dcdcd: dcdcd {
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <960000>;
|
|
+ regulator-max-microvolt = <960000>;
|
|
+ regulator-name = "vdd-sys";
|
|
+ };
|
|
+
|
|
+ reg_dcdce: dcdce {
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <1200000>;
|
|
+ regulator-max-microvolt = <1200000>;
|
|
+ regulator-name = "vcc-dram";
|
|
+ };
|
|
+
|
|
+ sw {
|
|
+ /* unused */
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&uart0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart0_ph_pins>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb2otg {
|
|
+ dr_mode = "host";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb2phy {
|
|
+ usb0_vbus-supply = <®_usb_vbus>;
|
|
+ usb3_vbus-supply = <®_usb_vbus>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb3 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb3phy {
|
|
+ phy-supply = <®_usb_vbus>;
|
|
+ status = "okay";
|
|
+};
|