mirror of
https://github.com/Fishwaldo/build.git
synced 2025-07-23 21:39:02 +00:00
1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
26 lines
819 B
Diff
26 lines
819 B
Diff
diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c
|
|
index 50d19605c38f..e15fa2389e3f 100644
|
|
--- a/drivers/gpu/drm/sun4i/sun4i_drv.c
|
|
+++ b/drivers/gpu/drm/sun4i/sun4i_drv.c
|
|
@@ -283,7 +283,6 @@ static int sun4i_drv_add_endpoints(struct device *dev,
|
|
remote = of_graph_get_remote_port_parent(ep);
|
|
if (!remote) {
|
|
DRM_DEBUG_DRIVER("Error retrieving the output node\n");
|
|
- of_node_put(remote);
|
|
continue;
|
|
}
|
|
|
|
@@ -297,11 +296,13 @@ static int sun4i_drv_add_endpoints(struct device *dev,
|
|
|
|
if (of_graph_parse_endpoint(ep, &endpoint)) {
|
|
DRM_DEBUG_DRIVER("Couldn't parse endpoint\n");
|
|
+ of_node_put(remote);
|
|
continue;
|
|
}
|
|
|
|
if (!endpoint.id) {
|
|
DRM_DEBUG_DRIVER("Endpoint is our panel... skipping\n");
|
|
+ of_node_put(remote);
|
|
continue;
|
|
}
|
|
}
|