mirror of
https://github.com/Fishwaldo/build.git
synced 2025-04-17 11:31:28 +00:00
1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
21 lines
791 B
Diff
21 lines
791 B
Diff
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
|
|
index 9e2e099b..a065943d 100644
|
|
--- a/drivers/spi/spidev.c
|
|
+++ b/drivers/spi/spidev.c
|
|
@@ -749,13 +749,11 @@ static int spidev_probe(struct spi_device *spi)
|
|
|
|
/*
|
|
* spidev should never be referenced in DT without a specific
|
|
- * compatible string, it is a Linux implementation thing
|
|
- * rather than a description of the hardware.
|
|
+ * compatible string, but people don't care and use DT overlays
|
|
+ * to activate SPIdev on demand
|
|
*/
|
|
if (spi->dev.of_node && !of_match_device(spidev_dt_ids, &spi->dev)) {
|
|
- dev_err(&spi->dev, "buggy DT: spidev listed directly in DT\n");
|
|
- WARN_ON(spi->dev.of_node &&
|
|
- !of_match_device(spidev_dt_ids, &spi->dev));
|
|
+ dev_info(&spi->dev, "probing from DT");
|
|
}
|
|
|
|
spidev_probe_acpi(spi);
|