mirror of
https://github.com/Fishwaldo/build.git
synced 2025-04-17 11:31:28 +00:00
1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
35 lines
873 B
Text
35 lines
873 B
Text
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
|
|
index 77533f7..8b3b184 100644
|
|
--- a/drivers/mtd/nand/nand_base.c
|
|
+++ b/drivers/mtd/nand/nand_base.c
|
|
@@ -532,11 +532,7 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int allowbbt)
|
|
{
|
|
struct nand_chip *chip = mtd_to_nand(mtd);
|
|
|
|
- if (!chip->bbt)
|
|
- return chip->block_bad(mtd, ofs);
|
|
-
|
|
- /* Return info from the table */
|
|
- return nand_isbad_bbt(mtd, ofs, allowbbt);
|
|
+ return 0;
|
|
}
|
|
|
|
/**
|
|
@@ -3030,16 +3026,7 @@ static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
|
|
int chipnr = (int)(offs >> chip->chip_shift);
|
|
int ret;
|
|
|
|
- /* Select the NAND device */
|
|
- nand_get_device(mtd, FL_READING);
|
|
- chip->select_chip(mtd, chipnr);
|
|
-
|
|
- ret = nand_block_checkbad(mtd, offs, 0);
|
|
-
|
|
- chip->select_chip(mtd, -1);
|
|
- nand_release_device(mtd);
|
|
-
|
|
- return ret;
|
|
+ return 0;
|
|
}
|
|
|
|
/**
|