mirror of
https://github.com/Fishwaldo/build.git
synced 2025-04-17 11:31:28 +00:00
1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
34 lines
1.2 KiB
Diff
34 lines
1.2 KiB
Diff
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
|
|
index 800a423c7bc2..a78b9bae44e0 100644
|
|
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
|
|
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.c
|
|
@@ -48,6 +48,7 @@ static const struct brcmf_feat_fwcap brcmf_fwcap_map[] = {
|
|
{ BRCMF_FEAT_MBSS, "mbss" },
|
|
{ BRCMF_FEAT_MCHAN, "mchan" },
|
|
{ BRCMF_FEAT_P2P, "p2p" },
|
|
+ { BRCMF_FEAT_MONITOR, "monitor" },
|
|
};
|
|
|
|
#ifdef DEBUG
|
|
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
|
|
index d1193825e559..3415d5d4d6b5 100644
|
|
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
|
|
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/feature.h
|
|
@@ -33,6 +33,7 @@
|
|
* MFP: 802.11w Management Frame Protection.
|
|
* GSCAN: enhanced scan offload feature.
|
|
* FWSUP: Firmware supplicant.
|
|
+ * MONITOR: firmware can pass monitor packets to host.
|
|
*/
|
|
#define BRCMF_FEAT_LIST \
|
|
BRCMF_FEAT_DEF(MBSS) \
|
|
@@ -48,7 +49,8 @@
|
|
BRCMF_FEAT_DEF(WOWL_ARP_ND) \
|
|
BRCMF_FEAT_DEF(MFP) \
|
|
BRCMF_FEAT_DEF(GSCAN) \
|
|
- BRCMF_FEAT_DEF(FWSUP)
|
|
+ BRCMF_FEAT_DEF(FWSUP) \
|
|
+ BRCMF_FEAT_DEF(MONITOR)
|
|
|
|
/*
|
|
* Quirks:
|