mirror of
https://github.com/Fishwaldo/build.git
synced 2025-04-15 02:21:28 +00:00
1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
71 lines
1.5 KiB
Diff
71 lines
1.5 KiB
Diff
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
|
|
index bf42690..7be04d5 100644
|
|
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
|
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
|
|
@@ -57,6 +57,28 @@
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
+
|
|
+ reg_usb1_vbus: usb1-vbus {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "usb1-vbus";
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ regulator-boot-on;
|
|
+ enable-active-high;
|
|
+ gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>;
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ wifi_pwrseq: wifi_pwrseq {
|
|
+ compatible = "mmc-pwrseq-simple";
|
|
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
|
|
+ post-power-on-delay-ms = <50>;
|
|
+ };
|
|
+
|
|
+};
|
|
+
|
|
+&ehci0 {
|
|
+ status = "okay";
|
|
};
|
|
|
|
&ehci1 {
|
|
@@ -71,6 +93,29 @@
|
|
status = "okay";
|
|
};
|
|
|
|
+&mmc1 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&mmc1_pins>;
|
|
+ vmmc-supply = <®_dldo2>;
|
|
+ vqmmc-supply = <®_dldo4>;
|
|
+ mmc-pwrseq = <&wifi_pwrseq>;
|
|
+ bus-width = <4>;
|
|
+ non-removable;
|
|
+ status = "okay";
|
|
+
|
|
+ brcmf: brcmf@1 {
|
|
+ reg = <1>;
|
|
+ compatible = "brcm,bcm4329-fmac";
|
|
+ interrupt-parent = <&r_pio>;
|
|
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 / EINT7 */
|
|
+ interrupt-names = "host-wake";
|
|
+ };
|
|
+};
|
|
+
|
|
+&ohci0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
&ohci1 {
|
|
status = "okay";
|
|
};
|
|
@@ -198,6 +243,7 @@
|
|
};
|
|
|
|
&usbphy {
|
|
+ usb1_vbus-supply = <®_usb1_vbus>;
|
|
status = "okay";
|
|
};
|
|
|