mirror of
https://github.com/Fishwaldo/build.git
synced 2025-04-15 02:21:28 +00:00
1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
252 lines
5.1 KiB
Diff
252 lines
5.1 KiB
Diff
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
|
|
index 3c032fb..ac7698f 100644
|
|
--- a/arch/arm64/boot/dts/allwinner/Makefile
|
|
+++ b/arch/arm64/boot/dts/allwinner/Makefile
|
|
@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-k1-plus.dtb
|
|
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
|
|
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
|
|
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
|
|
new file mode 100644
|
|
index 0000000..598c19f
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
|
|
@@ -0,0 +1,234 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
+/*
|
|
+ * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
|
|
+ *
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+#include "sun50i-h5.dtsi"
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+#include <dt-bindings/input/input.h>
|
|
+
|
|
+/ {
|
|
+ model = "Libre Computer Board ALL-H3-CC H5";
|
|
+ compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5";
|
|
+
|
|
+
|
|
+ aliases {
|
|
+ ethernet0 = &emac;
|
|
+ serial0 = &uart0;
|
|
+ };
|
|
+
|
|
+ chosen {
|
|
+ stdout-path = "serial0:115200n8";
|
|
+ };
|
|
+
|
|
+/* connector {
|
|
+ compatible = "hdmi-connector";
|
|
+ type = "a";
|
|
+
|
|
+ port {
|
|
+ hdmi_con_in: endpoint {
|
|
+ remote-endpoint = <&hdmi_out_con>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+*/
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+
|
|
+ pwr_led {
|
|
+ label = "librecomputer:green:pwr";
|
|
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
|
|
+ default-state = "on";
|
|
+ };
|
|
+
|
|
+ status_led {
|
|
+ label = "librecomputer:blue:status";
|
|
+ gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
|
|
+ };
|
|
+ };
|
|
+
|
|
+ gpio_keys {
|
|
+ compatible = "gpio-keys";
|
|
+
|
|
+ power {
|
|
+ label = "power";
|
|
+ linux,code = <KEY_POWER>;
|
|
+ gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
|
|
+ };
|
|
+ };
|
|
+
|
|
+ reg_vcc1v2: vcc1v2 {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc1v2";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ vin-supply = <®_vcc5v0>;
|
|
+ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
|
|
+ enable-active-high;
|
|
+ };
|
|
+
|
|
+ reg_vcc3v3: vcc3v3 {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc3v3";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ vin-supply = <®_vcc5v0>;
|
|
+ };
|
|
+
|
|
+ /* This represents the board's 5V input */
|
|
+ reg_vcc5v0: vcc5v0 {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc5v0";
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ };
|
|
+
|
|
+ reg_vcc_dram: vcc-dram {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc-dram";
|
|
+ regulator-min-microvolt = <1500000>;
|
|
+ regulator-max-microvolt = <1500000>;
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ vin-supply = <®_vcc5v0>;
|
|
+ gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
|
|
+ enable-active-high;
|
|
+ };
|
|
+
|
|
+ reg_vcc_io: vcc-io {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc-io";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ vin-supply = <®_vcc3v3>;
|
|
+ gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
|
|
+ };
|
|
+
|
|
+ reg_vdd_cpux: vdd-cpux {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vdd-cpux";
|
|
+ regulator-min-microvolt = <1200000>;
|
|
+ regulator-max-microvolt = <1200000>;
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ vin-supply = <®_vcc5v0>;
|
|
+ gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
|
|
+ enable-active-high;
|
|
+ };
|
|
+};
|
|
+
|
|
+&codec {
|
|
+ allwinner,audio-routing =
|
|
+ "Line Out", "LINEOUT",
|
|
+ "MIC1", "Mic",
|
|
+ "Mic", "MBIAS";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&cpu0 {
|
|
+ cpu-supply = <®_vdd_cpux>;
|
|
+};
|
|
+
|
|
+&de {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ehci0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ehci1 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ehci2 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ehci3 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&emac {
|
|
+ phy-handle = <&int_mii_phy>;
|
|
+ phy-mode = "mii";
|
|
+ allwinner,leds-active-low;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&hdmi {
|
|
+ status = "okay";
|
|
+};
|
|
+/*
|
|
+&hdmi_out {
|
|
+ hdmi_out_con: endpoint {
|
|
+ remote-endpoint = <&hdmi_con_in>;
|
|
+ };
|
|
+};
|
|
+*/
|
|
+&ir {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&ir_pins_a>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&mmc0 {
|
|
+ vmmc-supply = <®_vcc_io>;
|
|
+ bus-width = <4>;
|
|
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ohci0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ohci1 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ohci2 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&ohci3 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&sound_hdmi {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&mixer0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&tcon0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart0_pins_a>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_otg {
|
|
+ dr_mode = "host";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usbphy {
|
|
+ /* VBUS on USB ports are always on */
|
|
+ usb0_vbus-supply = <®_vcc5v0>;
|
|
+ usb1_vbus-supply = <®_vcc5v0>;
|
|
+ usb2_vbus-supply = <®_vcc5v0>;
|
|
+ usb3_vbus-supply = <®_vcc5v0>;
|
|
+ status = "okay";
|
|
+};
|