mirror of
https://github.com/Fishwaldo/build.git
synced 2025-04-15 10:31:41 +00:00
1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
21 lines
537 B
Diff
21 lines
537 B
Diff
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
|
|
index 1be1a02..dc9775d 100644
|
|
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
|
|
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
|
|
@@ -416,6 +416,16 @@
|
|
function = "i2c2";
|
|
};
|
|
|
|
+ i2s0_pins: i2s0 {
|
|
+ pins = "PA18", "PA19", "PA20", "PA21";
|
|
+ function = "i2s0";
|
|
+ };
|
|
+
|
|
+ i2s1_pins: i2s1 {
|
|
+ pins = "PG10", "PG11", "PG12", "PG13";
|
|
+ function = "i2s1";
|
|
+ };
|
|
+
|
|
mmc0_pins: mmc0 {
|
|
pins = "PF0", "PF1", "PF2", "PF3",
|
|
"PF4", "PF5";
|