mirror of
https://github.com/Fishwaldo/build.git
synced 2025-04-15 02:21:28 +00:00
1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
45 lines
1.4 KiB
Diff
45 lines
1.4 KiB
Diff
From cb4faa1940f5a33c2406c03476cf37ccc32f1997 Mon Sep 17 00:00:00 2001
|
|
From: Ondrej Jirman <megous@megous.com>
|
|
Date: Sun, 26 Feb 2017 16:09:28 +0100
|
|
Subject: [PATCH 41/87] ARM: sunxi: h3/h5: Add r_i2c I2C controller
|
|
|
|
Allwinner H3/H5 SoCs have an I2C controller at PL GPIO bank.
|
|
|
|
Add support for it in the device tree.
|
|
|
|
Signed-off-by: Ondrej Jirman <megous@megous.com>
|
|
[Icenowy: Change to use r_ccu and change pinmux node name]
|
|
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
|
|
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
|
|
---
|
|
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 14 ++++++++++++++
|
|
1 file changed, 14 insertions(+)
|
|
|
|
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
|
|
index 3a5f2aad7449..19fb71d29159 100644
|
|
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
|
|
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
|
|
@@ -624,6 +624,20 @@
|
|
status = "disabled";
|
|
};
|
|
|
|
+ r_i2c: i2c@1f02400 {
|
|
+ compatible = "allwinner,sun6i-a31-i2c";
|
|
+ reg = <0x01f02400 0x400>;
|
|
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&r_i2c_pins>;
|
|
+ clocks = <&r_ccu CLK_APB0_I2C>;
|
|
+ clock-frequency = <100000>;
|
|
+ resets = <&r_ccu RST_APB0_I2C>;
|
|
+ status = "disabled";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ };
|
|
+
|
|
r_pio: pinctrl@1f02c00 {
|
|
compatible = "allwinner,sun8i-h3-r-pinctrl";
|
|
reg = <0x01f02c00 0x400>;
|
|
--
|
|
2.13.5
|
|
|