mirror of
https://github.com/Fishwaldo/build.git
synced 2025-04-17 19:41:37 +00:00
1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
46 lines
2 KiB
Diff
46 lines
2 KiB
Diff
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
|
|
index 9b3a58e89dd1..d5bb81e88762 100644
|
|
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
|
|
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwil_types.h
|
|
@@ -174,6 +174,8 @@
|
|
#define BRCMF_MFP_CAPABLE 1
|
|
#define BRCMF_MFP_REQUIRED 2
|
|
|
|
+#define BRCMF_VHT_CAP_MCS_MAP_NSS_MAX 8
|
|
+
|
|
/* MAX_CHUNK_LEN is the maximum length for data passing to firmware in each
|
|
* ioctl. It is relatively small because firmware has small maximum size input
|
|
* playload restriction for ioctls.
|
|
@@ -550,6 +552,8 @@ struct brcmf_sta_info_le {
|
|
/* w/hi bit set if basic */
|
|
__le32 in; /* seconds elapsed since associated */
|
|
__le32 listen_interval_inms; /* Min Listen interval in ms for STA */
|
|
+
|
|
+ /* Fields valid for ver >= 3 */
|
|
__le32 tx_pkts; /* # of packets transmitted */
|
|
__le32 tx_failures; /* # of packets failed */
|
|
__le32 rx_ucast_pkts; /* # of unicast packets received */
|
|
@@ -558,6 +562,8 @@ struct brcmf_sta_info_le {
|
|
__le32 rx_rate; /* Rate of last successful rx frame */
|
|
__le32 rx_decrypt_succeeds; /* # of packet decrypted successfully */
|
|
__le32 rx_decrypt_failures; /* # of packet decrypted failed */
|
|
+
|
|
+ /* Fields valid for ver >= 4 */
|
|
__le32 tx_tot_pkts; /* # of tx pkts (ucast + mcast) */
|
|
__le32 rx_tot_pkts; /* # of data packets recvd (uni + mcast) */
|
|
__le32 tx_mcast_pkts; /* # of mcast pkts txed */
|
|
@@ -594,6 +600,14 @@ struct brcmf_sta_info_le {
|
|
*/
|
|
__le32 rx_pkts_retried; /* # rx with retry bit set */
|
|
__le32 tx_rate_fallback; /* lowest fallback TX rate */
|
|
+
|
|
+ /* Fields valid for ver >= 5 */
|
|
+ struct {
|
|
+ __le32 count; /* # rates in this set */
|
|
+ u8 rates[BRCMF_MAXRATES_IN_SET]; /* rates in 500kbps units w/hi bit set if basic */
|
|
+ u8 mcs[BRCMF_MCSSET_LEN]; /* supported mcs index bit map */
|
|
+ __le16 vht_mcs[BRCMF_VHT_CAP_MCS_MAP_NSS_MAX]; /* supported mcs index bit map per nss */
|
|
+ } rateset_adv;
|
|
};
|
|
|
|
struct brcmf_chanspec_list {
|