GitHub-Mirror/build
2
0
Fork 0
mirror of https://github.com/Fishwaldo/build.git synced 2025-07-23 21:39:02 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
build/patch/kernel
History
aprayoga e71d1560f0 Helios4: various updates (#1161) 
* helios4: next branch use u-boot 2018

use new u-boot based on upstream 2018

Signed-off-by: Aditya Prayoga <aditya@kobol.io>

* helios4: Tweak fancontrol configuration

Adjusted MINSTART and MINSTOP to suit both old and new fan.
Adjusted TEMP threshold so fan would stop or run in minimal speed when
the system idle.
Fixed wrong MINPWM value.

URL:https://wiki.kobol.io/pwm/#configuration-file
Signed-off-by: Aditya Prayoga <aditya@kobol.io>

* kernel: mvebu-next: use upstream helios4 dts

Helios4 device tree has been merged on upstream since 4.19.
Rework the patch to produce same device tree.

URL:https://patchwork.kernel.org/patch/10449393/

Signed-off-by: Aditya Prayoga <aditya@kobol.io>

* Helios4: Use boot-mvebu-next bootscript

Use boot-mvebu-next.cmd that make use of upstream's Generic Distro
Configuration.
Since loadaddr and fdt_addr varibales are no longer required, remove the
patch.

Signed-off-by: Aditya Prayoga <aditya@kobol.io>

* Helios4: mvebu-next: Add workaround for SPI and SATA concurrent access issue

Concurrent access on SPI NOR and SATA drives can lead to unstable SATA.
Therefore as workaround, disable SATA controller when SPI flash access
is needed and make it as user configurable item in armbianEnv.txt

This workaround might applies to Clearfog too.

Refer to
Commit 59af84c07c ("Helios4: Add SPI bootloader install feature
(#1126)")

Signed-off-by: Aditya Prayoga <aditya@kobol.io>

* Bootscripts: Fixed boot-mvebu-next.cmd

The environment setting (armbianEnv.txt) is loaded to RAM located on
${load_addr} but the env import use wrong address (${pxefile_addr_r}).

bootargs still expect ${boot_interface} which carried over from boot-
marvell.cmd. Upstream's distro configuration use ${devtype} instead.

Signed-off-by: Aditya Prayoga <aditya@kobol.io>
2018-11-23 15:39:23 +01:00
..
cubox-default [cubox-i] Drop K3.14.y and move 4.14.y to default, next -> 4.19.y, dev -> 4.19.y + mainline u-boot. Adjust 8188EU for K4.19.y 2018-11-06 18:39:31 +01:00
cubox-next [cubox-i] Drop K3.14.y and move 4.14.y to default, next -> 4.19.y, dev -> 4.19.y + mainline u-boot. Adjust 8188EU for K4.19.y 2018-11-06 18:39:31 +01:00
meson-default Fixed headers installation. Thanks to Jean Christian 2018-07-25 17:06:37 +00:00
meson64-default [ K4.14 aufs ] Upgrading AUFS patch on kernel 4.14.y 2018-11-20 19:56:43 +01:00
meson64-dev [Meson64] Dev patch adjustment, bugfix 2018-11-21 01:48:44 -05:00
meson64-next [ meson64 and odroidc2 ] Moving C2 to EOS, remove its default kernel and move to meson64 family. Bump meson64 DEV to 4.19.y and disable non-working patches. Tested C2 on NEXT and DEV (no HDMI output?) http://ix.io/1req 2018-11-07 16:12:05 +01:00
mt7623-default Bananapi R2 (#1151) 2018-11-08 18:51:42 +01:00
mvebu-default [mvebu default] Upstream patches 2018-10-26 16:15:48 +02:00
mvebu-dev [mvebu dev] moving to 4.19.y 2018-11-12 17:21:05 +01:00
mvebu-next Helios4: various updates (#1161) 2018-11-23 15:39:23 +01:00
mvebu64-default [ K4.14 aufs ] Upgrading AUFS patch on kernel 4.14.y 2018-11-20 19:56:43 +01:00
mvebu64-next [espressobin] Cleanup and bump to 4.19.y 2018-11-05 13:26:40 +01:00
odroidc1-default Fixed Odroid C1 packaging patch 2018-08-12 14:19:51 +02:00
odroidc1-next [odroid c1] Move to 4.19.y and change its status to EOS. Left in a working state: http://ix.io/1pZa 2018-10-25 12:28:35 +02:00
odroidxu4-default [ K4.14 aufs ] Upgrading AUFS patch on kernel 4.14.y 2018-11-20 19:56:43 +01:00
odroidxu4-next [odroid xu4] Drop kernel 3.10.y, default -> offical 4.14.y, next = vanilla 4.19.y http://ix.io/1rcZ & dev = n/a 2018-11-07 11:11:51 +01:00
pine64-default Realtek 881xAU patch cleanup and adjustement for 4.19.y 2018-10-10 17:03:21 +02:00
rk3399-default [ rk3399 default bugfix ] adjusting patches and config 2018-11-09 07:05:53 +01:00
rockchip-default Add rk3288 xt-q8l-v10 CSC board (#1158) 2018-11-22 07:04:19 +01:00
rockchip-dev Add rk3288 xt-q8l-v10 CSC board (#1158) 2018-11-22 07:04:19 +01:00
rockchip-next Add rk3288 xt-q8l-v10 CSC board (#1158) 2018-11-22 07:04:19 +01:00
rockchip64-default [bugfix] This commit fixes Bluetooth on Tinkerboard (tested) and most likely on z28Pro. Thanks to @Staars 2018-11-04 13:29:48 +01:00
rockchip64-dev Enable WiFi for Firefly RK3399 mainline kernel 2018-11-23 22:09:22 +08:00
s5p6818-next [ K4.14 aufs ] Upgrading AUFS patch on kernel 4.14.y 2018-11-20 19:56:43 +01:00
s500-default Fixed headers installation. Thanks to Jean Christian 2018-07-25 17:06:37 +00:00
sun4i-default Fixed headers installation. Thanks to Jean Christian 2018-07-25 17:06:37 +00:00
sun5i-default Fixed headers installation. Thanks to Jean Christian 2018-07-25 17:06:37 +00:00
sun7i-default Fixed headers installation. Thanks to Jean Christian 2018-07-25 17:06:37 +00:00
sun8i-default Fixed headers installation. Thanks to Jean Christian 2018-07-25 17:06:37 +00:00
sunxi-dev [ sunxi-dev ] Remove deprecated patch which removing fixes DVFS on Orangepi Zero 2018-11-22 06:18:42 +01:00
sunxi-next [ K4.14 aufs ] Upgrading AUFS patch on kernel 4.14.y 2018-11-20 19:56:43 +01:00
udoo-next [udoo-neo and udoo] Drop Udoo neo completly, drop udoo default and dev kernel 2018-11-07 14:11:24 +01:00
compiler.patch