GitHub-Mirror/build
2
0
Fork 0
mirror of https://github.com/Fishwaldo/build.git synced 2025-03-27 01:02:19 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
build/patch/kernel/rockchip64-default/z28pro_8822bs.patch

797 lines
18 KiB
Diff
Raw Blame History

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 92981d8..1dbe50c 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -17,6 +17,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64-android.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64-android-avb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-z28pro.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3366-fpga.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3366-sheep.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-z28pro.dts b/arch/arm64/boot/dts/rockchip/rk3328-z28pro.dts
new file mode 100644
index 0000000..7b82b78
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-z28pro.dts
@@ -0,0 +1,779 @@
+/*
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Z28pro";
+ compatible = "rockchip,rk3328-z28pro", "rockchip,rk3328";
+
+ chosen {
+ bootargs = "earlyprintk=uart8250-32bit,0xff130000";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ standby-led {
+ linux,default-trigger = "heartbeat";
+ gpios = <&rk805 0 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ power-led {
+ linux,default-trigger = "mmc0";
+ gpios = <&rk805 1 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ };
+
+ gmac_clkin: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_clkin";
+ #clock-cells = <0>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,name = "rockchip,rk3328";
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+
+ hdmi-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,mclk-fs = <128>;
+ simple-audio-card,name = "rockchip,hdmi";
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&hdmi>;
+ };
+ };
+
+ spdif-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "rockchip,spdif";
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ spdif_out: spdif-out {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_phy";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc_host_5v: vcc-host-5v-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb30_host_drv>;
+ regulator-name = "vcc_host_5v";
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb20_host_drv>;
+ regulator-name = "vcc_host1_5v";
+ vin-supply = <&vcc_sys>;
+ };
+
+ xin32k: xin32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ #clock-cells = <0>;
+ };
+
+
+ vcc_sd: sdmmc-ext-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio2 RK_PA7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0m0_gpio>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_io>;
+ };
+
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&ir_int>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ wireless-bluetooth {
+ compatible = "bluetooth-platdata";
+ uart_rts_gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default", "rts_gpio";
+ pinctrl-0 = <&uart2m1_xfer>;
+ pinctrl-1;
+ BT,wake_gpio;
+ BT,power_gpio = <&gpio1 0x18 GPIO_ACTIVE_HIGH>;
+ BT,wake_host_irq = <&gpio1 0x1a GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ wireless-wlan {
+ compatible = "wlan-platdata";
+ rockchip,grf = <&grf>;
+ wifi_chip_type = "rtl8822bs";
+ WIFI,host_wake_irq = <&gpio1 RK_PA5 GPIO_ACTIVE_HIGH>;
+ /*WIFI,poweren_gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;*/
+ status = "okay";
+ sdio_vref = <1800>;
+ };
+};
+
+&codec {
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&display_subsystem {
+ status = "okay";
+};
+
+&dfi {
+ status = "okay";
+};
+
+&dmc {
+ center-supply = <&vdd_logic>;
+ status = "okay";
+};
+
+&emmc {
+ /delete-property/ clock-freq-min-max;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ non-removable;
+ supports-emmc;
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ disable-wp;
+ max-frequency = <200000000>;
+ mmc-hs200-1_8v;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ vmmc-supply = <&vcc_io>;
+ vqmmc-supply = <&vcc_18emmc>;
+ status = "okay";
+};
+
+
+&gmac2io {
+ phy-supply = <&vcc_phy>;
+ phy-mode = "rgmii";
+ clock_in_out = "input";
+ snps,reset-gpio = <&gpio2 0x11 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+ assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmiim1_pins>;
+ tx_delay = <0x26>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+ mali-supply = <&vdd_logic>;
+};
+
+&hdmi {
+ #sound-dai-cells = <0>;
+ ddc-i2c-scl-high-time-ns = <9625>;
+ ddc-i2c-scl-low-time-ns = <10000>;
+ status = "okay";
+};
+
+&hdmiphy {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ rk805: rk805@18 {
+ compatible = "rockchip,rk805";
+ status = "okay";
+ reg = <0x18>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ gpio-controller;
+ #gpio-cells = <2>;
+ #clock-cells = <1>;
+ clock-output-names = "rk805-clkout1", "rk805-clkout2";
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc5-supply = <&vcc_io>;
+ vcc6-supply = <&vcc_sys>;
+
+
+ rtc {
+ status = "okay";
+ };
+
+ pwrkey {
+ status = "okay";
+ };
+
+ gpio {
+ status = "okay";
+ };
+
+ regulators {
+ compatible = "rk805-regulator";
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_logic: RK805_DCDC1 {
+ regulator-compatible = "RK805_DCDC1";
+ regulator-name = "vdd_logic";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-initial-mode = <0x1>;
+ regulator-ramp-delay = <12500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-mode = <0x2>;
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vdd_arm: RK805_DCDC2 {
+ regulator-compatible = "RK805_DCDC2";
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-initial-mode = <0x1>;
+ regulator-ramp-delay = <12500>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-mode = <0x2>;
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: RK805_DCDC3 {
+ regulator-compatible = "RK805_DCDC3";
+ regulator-name = "vcc_ddr";
+ regulator-initial-mode = <0x1>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-mode = <0x2>;
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: RK805_DCDC4 {
+ regulator-compatible = "RK805_DCDC4";
+ regulator-name = "vcc_io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <0x1>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-mode = <0x2>;
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vdd_18: RK805_LDO1 {
+ regulator-compatible = "RK805_LDO1";
+ regulator-name = "vdd_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_18emmc: RK805_LDO2 {
+ regulator-compatible = "RK805_LDO2";
+ regulator-name = "vcc_18emmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_11: RK805_LDO3 {
+ regulator-compatible = "RK805_LDO3";
+ regulator-name = "vdd_11";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1100000>;
+ };
+ };
+ };
+ };
+};
+
+&h265e {
+ status = "okay";
+};
+
+&i2s0 {
+ #sound-dai-cells = <0>;
+ rockchip,bclk-fs = <128>;
+ status = "okay";
+};
+
+&i2s1 {
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+
+&io_domains {
+ status = "okay";
+
+ vccio1-supply = <&vcc_io>;
+ vccio2-supply = <&vcc_18emmc>;
+ vccio3-supply = <&vcc_io>;
+ vccio4-supply = <&vdd_18>;
+ vccio5-supply = <&vcc_io>;
+ vccio6-supply = <&vcc_io>;
+ pmuio-supply = <&vcc_io>;
+};
+
+&pinctrl {
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&clk_32k_out>;
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; /* gpio2_a6 */
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins =
+ <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ clk_32k {
+ clk_32k_out: clk-32k-out {
+ rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ usb2 {
+ usb20_host_drv: usb20-host-drv {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb3 {
+ usb30_host_drv: usb30-host-drv {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&rga {
+ status = "okay";
+};
+
+
+&pwm3 {
+ status = "okay";
+ compatible = "rockchip,remotectl-pwm";
+ remote_pwm_id = <3>;
+ handle_cpu_id = <1>;
+ remote_support_psci = <1>;
+
+ ir_key1 {
+ rockchip,usercode = <0x4040>;
+ rockchip,key_table =
+ <0xf2 KEY_REPLY>,
+ <0xba KEY_BACK>,
+ <0xf4 KEY_UP>,
+ <0xf1 KEY_DOWN>,
+ <0xef KEY_LEFT>,
+ <0xee KEY_RIGHT>,
+ <0xbd KEY_HOME>,
+ <0xea KEY_VOLUMEUP>,
+ <0xe3 KEY_VOLUMEDOWN>,
+ <0xe2 KEY_SEARCH>,
+ <0xb2 KEY_POWER>,
+ <0xbc KEY_MUTE>,
+ <0xec KEY_MENU>,
+ <0xbf 0x190>,
+ <0xe0 0x191>,
+ <0xe1 0x192>,
+ <0xe9 183>,
+ <0xe6 248>,
+ <0xe8 185>,
+ <0xe7 186>,
+ <0xf0 388>,
+ <0xbe 0x175>;
+ };
+
+ ir_key2 {
+ rockchip,usercode = <0xff00>;
+ rockchip,key_table =
+ <0x39 KEY_POWER>,
+ <0x73 KEY_MUTE>,
+ <0xa4 KEY_PLAYPAUSE>,
+ <0x75 KEY_VOLUMEDOWN>,
+ <0x77 KEY_VOLUMEUP>,
+ <0x7d KEY_MENU>,
+ <0xf9 KEY_HOME>,
+ <0x5f KEY_BACK>,
+ <0xb9 KEY_UP>,
+ <0xe9 KEY_DOWN>,
+ <0xb8 KEY_LEFT>,
+ <0xea KEY_RIGHT>,
+ <0xaa KEY_REPLY>,
+ <0x55 KEY_1>,
+ <0x5b KEY_2>,
+ <0xf8 KEY_3>,
+ <0x57 KEY_4>,
+ <0xed KEY_5>,
+ <0xee KEY_6>,
+ <0x59 KEY_7>,
+ <0xf1 KEY_8>,
+ <0xf2 KEY_9>,
+ <0xe0 KEY_BACKSPACE>,
+ <0x79 KEY_0>,
+ <0xa4 KEY_SETUP>;
+ };
+
+ ir_key3 {
+ rockchip,usercode = <0x1dcc>;
+ rockchip,key_table =
+ <0xee KEY_REPLY>,
+ <0xf0 KEY_BACK>,
+ <0xf8 KEY_UP>,
+ <0xbb KEY_DOWN>,
+ <0xef KEY_LEFT>,
+ <0xed KEY_RIGHT>,
+ <0xfc KEY_HOME>,
+ <0xf1 KEY_VOLUMEUP>,
+ <0xfd KEY_VOLUMEDOWN>,
+ <0xb7 KEY_SEARCH>,
+ <0xff KEY_POWER>,
+ <0xf3 KEY_MUTE>,
+ <0xbf KEY_MENU>,
+ <0xf9 0x191>,
+ <0xf5 0x192>,
+ <0xb3 388>,
+ <0xbe KEY_1>,
+ <0xba KEY_2>,
+ <0xb2 KEY_3>,
+ <0xbd KEY_4>,
+ <0xf9 KEY_5>,
+ <0xb1 KEY_6>,
+ <0xfc KEY_7>,
+ <0xf8 KEY_8>,
+ <0xb0 KEY_9>,
+ <0xb6 KEY_0>,
+ <0xb5 KEY_BACKSPACE>;
+ };
+};
+
+&rkvdec {
+ status = "okay";
+};
+
+&rkvdec_mmu {
+ status = "okay";
+};
+
+&sdmmc {
+ /delete-property/ clock-freq-min-max;
+ max-frequency = <150000000>;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ ignore-pm-notify;
+ keep-power-in-suspend;
+ power-inverted;
+ supports-UHS_SDR104;
+ supports-sdio;
+ cap-sdio-irq;
+ non-removable;
+ bus-width = <4>;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_cmd &sdmmc0_clk>;
+ /*vmmc-supply = <&vcc_sdio>;
+ vqmmc-supply = <&vdd_18>;*/
+ status = "okay";
+};
+
+
+
+&sdmmc_ext {
+ /delete-property/ clock-freq-min-max;
+ reg = <0x0 0xff5f0000 0x0 0x4000>;
+ clocks = <&cru HCLK_SDMMC_EXT>, <&cru SCLK_SDMMC_EXT>, <&cru SCLK_SDMMC_EXT_DRV>, <&cru SCLK_SDMMC_EXT_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+ fifo-depth = <0x100>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ status = "okay";
+ cd-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+ bus-width = <0x4>;
+ cap-sd-highspeed;
+ disable-wp;
+ max-frequency = <150000000>;
+ num-slots = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0ext_clk &sdmmc0ext_cmd &sdmmc0ext_dectn &sdmmc0ext_bus4>;
+ supports-sd;
+ card-detect-delay = <0x320>;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vcc_sd>;
+ ignore-pm-notify;
+ keep-power-in-suspend;
+ power-inverted;
+ };
+
+&spdif {
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdifm0_tx>;
+ status = "okay";
+};
+
+&threshold {
+ temperature = <90000>; /* millicelsius */
+};
+
+&target {
+ temperature = <105000>; /* millicelsius */
+};
+
+&soc_crit {
+ temperature = <110000>; /* millicelsius */
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <0>;
+ rockchip,hw-tshut-polarity = <0>;
+ rockchip,hw-tshut-temp = <120000>;
+ status = "okay";
+};
+
+
+&uart2 {
+ status = "okay";
+ dma-names = "tx", "rx";
+};
+
+&u2phy {
+ status = "okay";
+};
+
+&u2phy_host {
+ phy-supply = <&vcc_host1_5v>;
+ status = "okay";
+};
+
+&u2phy_otg {
+ phy-supply = <&vcc_otg_5v>;
+ status = "okay";
+};
+
+&u3phy {
+ status = "okay";
+};
+
+&u3phy_utmi {
+ phy-supply = <&vcc_host_5v>;
+ status = "okay";
+};
+
+&u3phy_pipe {
+ phy-supply = <&vcc_host_5v>;
+ status = "okay";
+};
+
+&usb20_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usbdrd3 {
+ status = "okay";
+};
+
+&usbdrd_dwc3 {
+ status = "okay";
+};
+
+&vepu {
+ status = "okay";
+};
+
+&vepu_mmu {
+ status = "okay";
+};
+
+&venc_srv {
+ status = "okay";
+};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&vpu_service {
+ status = "okay";
+};
Reference in a new issue View git blame Copy permalink