mirror of
https://github.com/Fishwaldo/build.git
synced 2025-03-30 02:31:46 +00:00
1a12994e79
* [Early WIP] Update sunxi-next to kernel 4.17 * Switch Allwinner 32 and 64bit to U-boot 2018.05 * Adjust patched for 4.17.y / sunxi-next - adjust both configurations - removing FAT support from u-boot (breaks if you try to save) Tested those boards: Cubietruck: wlan fails http://ix.io/1fYS USB OK, HDMI yes Bananapi R40: http://ix.io/1fZm USB OK, HDMI yes Lime A64: USB no, HDMI no, wireless buggy, eMMC yes Orangepi prime H5: OK http://ix.io/1fZJ DVFS no Orangepi2e: DVFS OK, HDMI OK, net OK, wifi OK, eMMC ok, http://ix.io/1fZT * Kernel config update, enabling HDMI on CT+ * Trying to fix A64 HDMI but failed. Fixed M64 ethernet instead * Update orangepioneplus.wip * Update orangepioneplus.wip * Fix H6 build process * Add regulator bits for Orangepizero+, thanks to @5kft * add H5 support for optional 1.3v regulator and 1.3GHz operation This patch adds two optional overlays that can be used to: 1) enable the 1.1v/1.3v regulator on boards that provide the necessary compatible H/W support 2) modify the default CPU clock operating table to add new 1.2GHz and 1.3GHz clocks Note that the generated regulator overlay will only support boards whose 1.1v/1.3v regulator is controlled by GPIO PL6. * updates for the NanoPi NEO Plus2 This change introduces a patch that provides two changes for the NanoPi NEO Plus2: * Configure the "cpu0" to use the "vdd_cpux" regulator; this enables the ability to use higher CPU clocks * Correct the configurations of the on-board power and status LEDs * Adjust nightly building and few boards config cleanup
35 lines
863 B
Diff
35 lines
863 B
Diff
===================================================================
|
|
--- /dev/null
|
|
+++ u-boot-2015.01/configs/Awsom_defconfig
|
|
@@ -0,0 +1,31 @@
|
|
+CONFIG_ARM=y
|
|
+CONFIG_ARCH_SUNXI=y
|
|
+CONFIG_MACH_SUN7I=y
|
|
+CONFIG_DRAM_CLK=480
|
|
+CONFIG_DRAM_ZQ=127
|
|
+CONFIG_DRAM_EMR1=4
|
|
+CONFIG_MMC0_CD_PIN="PB9"
|
|
+CONFIG_SATAPWR="PB8"
|
|
+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-cubieboard2"
|
|
+CONFIG_AHCI=y
|
|
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
|
+CONFIG_SPL_I2C_SUPPORT=y
|
|
+CONFIG_SPL=y
|
|
+CONFIG_HUSH_PARSER=y
|
|
+CONFIG_CMD_BOOTZ=y
|
|
+# CONFIG_CMD_IMLS is not set
|
|
+# CONFIG_CMD_FLASH is not set
|
|
+# CONFIG_CMD_FPGA is not set
|
|
+CONFIG_SCSI_AHCI=y
|
|
+CONFIG_SCSI=y
|
|
+CONFIG_USB_EHCI_HCD=y
|
|
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
|
|
+CONFIG_CMD_DHCP=y
|
|
+CONFIG_CMD_MMC=y
|
|
+CONFIG_CMD_I2C=y
|
|
+CONFIG_DM_ETH=y
|
|
+CONFIG_ETH_DESIGNWARE=y
|
|
+CONFIG_SUN7I_GMAC=y
|
|
+CONFIG_DM_SERIAL=y
|
|
+CONFIG_USB=y
|
|
+CONFIG_DM_USB=y
|