ACPI and power management updates for 3.8-rc1

* Introduction of device PM QoS flags.
 
 * ACPI device power management update allowing subsystems other than
   PCI to use it more easily.
 
 * ACPI device enumeration rework allowing additional kinds of devices
   to be enumerated via ACPI.  From Mika Westerberg, Adrian Hunter,
   Mathias Nyman, Andy Shevchenko, and Rafael J. Wysocki.
 
 * ACPICA update to version 20121018 from Bob Moore and Lv Zheng.
 
 * ACPI memory hotplug update from Wen Congyang and Yasuaki Ishimatsu.
 
 * Introduction of acpi_handle_<level>() messaging macros and ACPI-based CPU
   hot-remove support from Toshi Kani.
 
 * ACPI EC updates from Feng Tang.
 
 * cpufreq updates from Viresh Kumar, Fabio Baltieri and others.
 
 * cpuidle changes to quickly notice governor prediction failure from
   Youquan Song.
 
 * Support for using multiple cpuidle drivers at the same time and cpuidle
   cleanups from Daniel Lezcano.
 
 * devfreq updates from Nishanth Menon and others.
 
 * cpupower update from Thomas Renninger.
 
 * Fixes and small cleanups all over the place.
 
 --
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJQxxevAAoJEKhOf7ml8uNsHacQAK2xoQozDddPBAaTCf1OWW/G
 J4E2qMn+gy4AtFmQ0/xeZVvvylOCn9eu/kv3QJ/bFlVoUsqTgfPwQBjT6HjF1Acn
 7yVFdr9H/tn2wi9nW2Gv6Tl2Hr/kFLpo0f5Kd40Z+P8SV5sKX5ktJcVpJ/I/P4Vh
 Qw2nWtj7hQktZDERzgG4ZpMbQToNhbLhbKWB9ad3/XQSSA9JkfgvBFgrTEGHcZD5
 bwsggjNdOAWNGeDdzRsQSDn0Alld5ILVdSJ5xKimO1O70WvKc7fqA1IdYRIeKL90
 yz4bcoYKzl9iktlw8+x5o1U9mrc8TFV5p4+zV+t5Z6pzS/J3kWvnsW4zu9sCrxFv
 Wic3SKyiem7s2dxrYyj4ZXAci3GK4ouRTrCLqk7/00tEGdwAQD1ZNfsUJp6jKayz
 FvtZUgItcOyrlQ6B4nh951OY6dI3AUYJ2NuWWNr5NZkgVAvQGV8zTGOImbeVeL2+
 pMiw14zScO3ylYilVcjTKDDMj2sDZ68mw5PIcbmksvWsCLo26jDBVDtLVmtYWyd4
 ek3WnOrQZr0R3agvOLLssMKXompvpP+N4Klf4rV+GtqGsWtHryYKys2Laju9FwFj
 yYLchxYlxhGTzqq8LjF90HDL0TWpPe6cPi+B5ow9g/SXLexbMKNQGhv3Jovm2yR3
 j54tKBWy7e9AAYEDPirX
 =6OEP
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-for-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:

 - Introduction of device PM QoS flags.

 - ACPI device power management update allowing subsystems other than
   PCI to use it more easily.

 - ACPI device enumeration rework allowing additional kinds of devices
   to be enumerated via ACPI.  From Mika Westerberg, Adrian Hunter,
   Mathias Nyman, Andy Shevchenko, and Rafael J. Wysocki.

 - ACPICA update to version 20121018 from Bob Moore and Lv Zheng.

 - ACPI memory hotplug update from Wen Congyang and Yasuaki Ishimatsu.

 - Introduction of acpi_handle_<level>() messaging macros and ACPI-based
   CPU hot-remove support from Toshi Kani.

 - ACPI EC updates from Feng Tang.

 - cpufreq updates from Viresh Kumar, Fabio Baltieri and others.

 - cpuidle changes to quickly notice governor prediction failure from
   Youquan Song.

 - Support for using multiple cpuidle drivers at the same time and
   cpuidle cleanups from Daniel Lezcano.

 - devfreq updates from Nishanth Menon and others.

 - cpupower update from Thomas Renninger.

 - Fixes and small cleanups all over the place.

* tag 'pm+acpi-for-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (196 commits)
  mmc: sdhci-acpi: enable runtime-pm for device HID INT33C6
  ACPI: add Haswell LPSS devices to acpi_platform_device_ids list
  ACPI: add documentation about ACPI 5 enumeration
  pnpacpi: fix incorrect TEST_ALPHA() test
  ACPI / PM: Fix header of acpi_dev_pm_detach() in acpi.h
  ACPI / video: ignore BIOS initial backlight value for HP Folio 13-2000
  ACPI : do not use Lid and Sleep button for S5 wakeup
  ACPI / PNP: Do not crash due to stale pointer use during system resume
  ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklist
  ACPI: do acpisleep dmi check when CONFIG_ACPI_SLEEP is set
  spi / ACPI: add ACPI enumeration support
  gpio / ACPI: add ACPI support
  PM / devfreq: remove compiler error with module governors (2)
  cpupower: IvyBridge (0x3a and 0x3e models) support
  cpupower: Provide -c param for cpupower monitor to schedule process on all cores
  cpupower tools: Fix warning and a bug with the cpu package count
  cpupower tools: Fix malloc of cpu_info structure
  cpupower tools: Fix issues with sysfs_topology_read_file
  cpupower tools: Fix minor warnings
  cpupower tools: Update .gitignore for files created in the debug directories
  ...

Documentation/ABI/testing/sysfs-class-devfreq

@@ -11,7 +11,7 @@ What:		/sys/class/devfreq/.../governor
 Date:		September 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
-		The /sys/class/devfreq/.../governor shows the name of the
+		The /sys/class/devfreq/.../governor show or set the name of the
 		governor used by the corresponding devfreq object.
 
 What:		/sys/class/devfreq/.../cur_freq
@@ -19,15 +19,16 @@ Date:		September 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
 Description:
 		The /sys/class/devfreq/.../cur_freq shows the current
-		frequency of the corresponding devfreq object.
+		frequency of the corresponding devfreq object. Same as
+		target_freq when get_cur_freq() is not implemented by
+		devfreq driver.
 
-What:		/sys/class/devfreq/.../central_polling
+What:		/sys/class/devfreq/.../target_freq
-Date:		September 2011
+Date:		September 2012
-Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Contact:	Rajagopal Venkat <rajagopal.venkat@linaro.org>
 Description:
-		The /sys/class/devfreq/.../central_polling shows whether
+		The /sys/class/devfreq/.../target_freq shows the next governor
-		the devfreq ojbect is using devfreq-provided central
+		predicted target frequency of the corresponding devfreq object.
-		polling mechanism or not.
 
 What:		/sys/class/devfreq/.../polling_interval
 Date:		September 2011
@@ -43,6 +44,17 @@ Description:
 		(/sys/class/devfreq/.../central_polling is 0), this value
 		may be useless.
 
+What:		/sys/class/devfreq/.../trans_stat
+Date:		October 2012
+Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
+Descrtiption:
+		This ABI shows the statistics of devfreq behavior on a
+		specific device. It shows the time spent in each state and
+		the number of transitions between states.
+		In order to activate this ABI, the devfreq target device
+		driver should provide the list of available frequencies
+		with its profile.
+
 What:		/sys/class/devfreq/.../userspace/set_freq
 Date:		September 2011
 Contact:	MyungJoo Ham <myungjoo.ham@samsung.com>
@@ -50,3 +62,19 @@ Description:
 		The /sys/class/devfreq/.../userspace/set_freq shows and
 		sets the requested frequency for the devfreq object if
 		userspace governor is in effect.
+
+What:		/sys/class/devfreq/.../available_frequencies
+Date:		October 2012
+Contact:	Nishanth Menon <nm@ti.com>
+Description:
+		The /sys/class/devfreq/.../available_frequencies shows
+		the available frequencies of the corresponding devfreq object.
+		This is a snapshot of available frequencies and not limited
+		by the min/max frequency restrictions.
+
+What:		/sys/class/devfreq/.../available_governors
+Date:		October 2012
+Contact:	Nishanth Menon <nm@ti.com>
+Description:
+		The /sys/class/devfreq/.../available_governors shows
+		currently available governors in the system.

Documentation/ABI/testing/sysfs-devices-power

@@ -204,3 +204,34 @@ Description:
 
 		This attribute has no effect on system-wide suspend/resume and
 		hibernation.
+
+What:		/sys/devices/.../power/pm_qos_no_power_off
+Date:		September 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power/pm_qos_no_power_off attribute
+		is used for manipulating the PM QoS "no power off" flag.  If
+		set, this flag indicates to the kernel that power should not
+		be removed entirely from the device.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		it is not present.
+
+		This attribute has no effect on system-wide suspend/resume and
+		hibernation.
+
+What:		/sys/devices/.../power/pm_qos_remote_wakeup
+Date:		September 2012
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power/pm_qos_remote_wakeup attribute
+		is used for manipulating the PM QoS "remote wakeup required"
+		flag.  If set, this flag indicates to the kernel that the
+		device is a source of user events that have to be signaled from
+		its low-power states.
+
+		Not all drivers support this attribute.  If it isn't supported,
+		it is not present.
+
+		This attribute has no effect on system-wide suspend/resume and
+		hibernation.

Documentation/ABI/testing/sysfs-devices-sun

@@ -0,0 +1,14 @@
+Whatt:		/sys/devices/.../sun
+Date:		October 2012
+Contact:	Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
+Description:
+		The file contains a Slot-unique ID which provided by the _SUN
+		method in the ACPI namespace. The value is written in Advanced
+		Configuration and Power Interface Specification as follows:
+
+		"The _SUN value is required to be unique among the slots of
+		the same type. It is also recommended that this number match
+		the slot number printed on the physical slot whenever possible."
+
+		So reading the sysfs file, we can identify a physical position
+		of the slot in the system.

Documentation/acpi/enumeration.txt

@@ -0,0 +1,227 @@
+ACPI based device enumeration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ACPI 5 introduced a set of new resources (UartTSerialBus, I2cSerialBus,
+SpiSerialBus, GpioIo and GpioInt) which can be used in enumerating slave
+devices behind serial bus controllers.
+
+In addition we are starting to see peripherals integrated in the
+SoC/Chipset to appear only in ACPI namespace. These are typically devices
+that are accessed through memory-mapped registers.
+
+In order to support this and re-use the existing drivers as much as
+possible we decided to do following:
+
+	o Devices that have no bus connector resource are represented as
+	  platform devices.
+
+	o Devices behind real busses where there is a connector resource
+	  are represented as struct spi_device or struct i2c_device
+	  (standard UARTs are not busses so there is no struct uart_device).
+
+As both ACPI and Device Tree represent a tree of devices (and their
+resources) this implementation follows the Device Tree way as much as
+possible.
+
+The ACPI implementation enumerates devices behind busses (platform, SPI and
+I2C), creates the physical devices and binds them to their ACPI handle in
+the ACPI namespace.
+
+This means that when ACPI_HANDLE(dev) returns non-NULL the device was
+enumerated from ACPI namespace. This handle can be used to extract other
+device-specific configuration. There is an example of this below.
+
+Platform bus support
+~~~~~~~~~~~~~~~~~~~~
+Since we are using platform devices to represent devices that are not
+connected to any physical bus we only need to implement a platform driver
+for the device and add supported ACPI IDs. If this same IP-block is used on
+some other non-ACPI platform, the driver might work out of the box or needs
+some minor changes.
+
+Adding ACPI support for an existing driver should be pretty
+straightforward. Here is the simplest example:
+
+	#ifdef CONFIG_ACPI
+	static struct acpi_device_id mydrv_acpi_match[] = {
+		/* ACPI IDs here */
+		{ }
+	};
+	MODULE_DEVICE_TABLE(acpi, mydrv_acpi_match);
+	#endif
+
+	static struct platform_driver my_driver = {
+		...
+		.driver = {
+			.acpi_match_table = ACPI_PTR(mydrv_acpi_match),
+		},
+	};
+
+If the driver needs to perform more complex initialization like getting and
+configuring GPIOs it can get its ACPI handle and extract this information
+from ACPI tables.
+
+Currently the kernel is not able to automatically determine from which ACPI
+device it should make the corresponding platform device so we need to add
+the ACPI device explicitly to acpi_platform_device_ids list defined in
+drivers/acpi/scan.c. This limitation is only for the platform devices, SPI
+and I2C devices are created automatically as described below.
+
+SPI serial bus support
+~~~~~~~~~~~~~~~~~~~~~~
+Slave devices behind SPI bus have SpiSerialBus resource attached to them.
+This is extracted automatically by the SPI core and the slave devices are
+enumerated once spi_register_master() is called by the bus driver.
+
+Here is what the ACPI namespace for a SPI slave might look like:
+
+	Device (EEP0)
+	{
+		Name (_ADR, 1)
+		Name (_CID, Package() {
+			"ATML0025",
+			"AT25",
+		})
+		...
+		Method (_CRS, 0, NotSerialized)
+		{
+			SPISerialBus(1, PolarityLow, FourWireMode, 8,
+				ControllerInitiated, 1000000, ClockPolarityLow,
+				ClockPhaseFirst, "\\_SB.PCI0.SPI1",)
+		}
+		...
+
+The SPI device drivers only need to add ACPI IDs in a similar way than with
+the platform device drivers. Below is an example where we add ACPI support
+to at25 SPI eeprom driver (this is meant for the above ACPI snippet):
+
+	#ifdef CONFIG_ACPI
+	static struct acpi_device_id at25_acpi_match[] = {
+		{ "AT25", 0 },
+		{ },
+	};
+	MODULE_DEVICE_TABLE(acpi, at25_acpi_match);
+	#endif
+
+	static struct spi_driver at25_driver = {
+		.driver = {
+			...
+			.acpi_match_table = ACPI_PTR(at25_acpi_match),
+		},
+	};
+
+Note that this driver actually needs more information like page size of the
+eeprom etc. but at the time writing this there is no standard way of
+passing those. One idea is to return this in _DSM method like:
+
+	Device (EEP0)
+	{
+		...
+		Method (_DSM, 4, NotSerialized)
+		{
+			Store (Package (6)
+			{
+				"byte-len", 1024,
+				"addr-mode", 2,
+				"page-size, 32
+			}, Local0)
+
+			// Check UUIDs etc.
+
+			Return (Local0)
+		}
+
+Then the at25 SPI driver can get this configation by calling _DSM on its
+ACPI handle like:
+
+	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+	struct acpi_object_list input;
+	acpi_status status;
+
+	/* Fill in the input buffer */
+
+	status = acpi_evaluate_object(ACPI_HANDLE(&spi->dev), "_DSM",
+				      &input, &output);
+	if (ACPI_FAILURE(status))
+		/* Handle the error */
+
+	/* Extract the data here */
+
+	kfree(output.pointer);
+
+I2C serial bus support
+~~~~~~~~~~~~~~~~~~~~~~
+The slaves behind I2C bus controller only need to add the ACPI IDs like
+with the platform and SPI drivers. However the I2C bus controller driver
+needs to call acpi_i2c_register_devices() after it has added the adapter.
+
+An I2C bus (controller) driver does:
+
+	...
+	ret = i2c_add_numbered_adapter(adapter);
+	if (ret)
+		/* handle error */
+
+	of_i2c_register_devices(adapter);
+	/* Enumerate the slave devices behind this bus via ACPI */
+	acpi_i2c_register_devices(adapter);
+
+Below is an example of how to add ACPI support to the existing mpu3050
+input driver:
+
+	#ifdef CONFIG_ACPI
+	static struct acpi_device_id mpu3050_acpi_match[] = {
+		{ "MPU3050", 0 },
+		{ },
+	};
+	MODULE_DEVICE_TABLE(acpi, mpu3050_acpi_match);
+	#endif
+
+	static struct i2c_driver mpu3050_i2c_driver = {
+		.driver	= {
+			.name	= "mpu3050",
+			.owner	= THIS_MODULE,
+			.pm	= &mpu3050_pm,
+			.of_match_table = mpu3050_of_match,
+			.acpi_match_table  ACPI_PTR(mpu3050_acpi_match),
+		},
+		.probe		= mpu3050_probe,
+		.remove		= __devexit_p(mpu3050_remove),
+		.id_table	= mpu3050_ids,
+	};
+
+GPIO support
+~~~~~~~~~~~~
+ACPI 5 introduced two new resources to describe GPIO connections: GpioIo
+and GpioInt. These resources are used be used to pass GPIO numbers used by
+the device to the driver. For example:
+
+	Method (_CRS, 0, NotSerialized)
+	{
+		Name (SBUF, ResourceTemplate()
+		{
+			GpioIo (Exclusive, PullDefault, 0x0000, 0x0000,
+				IoRestrictionOutputOnly, "\\_SB.PCI0.GPI0",
+				0x00, ResourceConsumer,,)
+			{
+				// Pin List
+				0x0055
+			}
+			...
+
+			Return (SBUF)
+		}
+	}
+
+These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0"
+specifies the path to the controller. In order to use these GPIOs in Linux
+we need to translate them to the Linux GPIO numbers.
+
+The driver can do this by including <linux/acpi_gpio.h> and then calling
+acpi_get_gpio(path, gpio). This will return the Linux GPIO number or
+negative errno if there was no translation found.
+
+Other GpioIo parameters must be converted first by the driver to be
+suitable to the gpiolib before passing them.
+
+In case of GpioInt resource an additional call to gpio_to_irq() must be
+done before calling request_irq().

Documentation/devicetree/bindings/cpufreq/cpufreq-spear.txt

@@ -0,0 +1,42 @@
+SPEAr cpufreq driver
+-------------------
+
+SPEAr SoC cpufreq driver for CPU frequency scaling.
+It supports both uniprocessor (UP) and symmetric multiprocessor (SMP) systems
+which share clock across all CPUs.
+
+Required properties:
+- cpufreq_tbl: Table of frequencies CPU could be transitioned into, in the
+  increasing order.
+
+Optional properties:
+- clock-latency: Specify the possible maximum transition latency for clock, in
+  unit of nanoseconds.
+
+Both required and optional properties listed above must be defined under node
+/cpus/cpu@0.
+
+Examples:
+--------
+cpus {
+
+	<...>
+
+	cpu@0 {
+		compatible = "arm,cortex-a9";
+		reg = <0>;
+
+		<...>
+
+		cpufreq_tbl = < 166000
+				200000
+				250000
+				300000
+				400000
+				500000
+				600000 >;
+	};
+
+	<...>
+
+};

Documentation/power/pm_qos_interface.txt

@@ -99,7 +99,7 @@ reading the aggregated value does not require any locking mechanism.
 
 From kernel mode the use of this interface is the following:
 
-int dev_pm_qos_add_request(device, handle, value):
+int dev_pm_qos_add_request(device, handle, type, value):
 Will insert an element into the list for that identified device with the
 target value.  Upon change to this list the new target is recomputed and any
 registered notifiers are called only if the target value is now different.

arch/arm/Kconfig

@@ -908,6 +908,7 @@ config ARCH_NOMADIK
 
 config PLAT_SPEAR
 	bool "ST SPEAr"
+	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKDEV_LOOKUP

arch/ia64/include/asm/device.h

@@ -7,9 +7,6 @@
 #define _ASM_IA64_DEVICE_H
 
 struct dev_archdata {
-#ifdef CONFIG_ACPI
-	void	*acpi_handle;
-#endif
 #ifdef CONFIG_INTEL_IOMMU
 	void *iommu; /* hook for IOMMU specific extension */
 #endif

arch/ia64/kernel/acpi.c

@@ -633,6 +633,7 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
 				      ACPI_EDGE_SENSITIVE) ? IOSAPIC_EDGE :
 				     IOSAPIC_LEVEL);
 }
+EXPORT_SYMBOL_GPL(acpi_register_gsi);
 
 void acpi_unregister_gsi(u32 gsi)
 {
@@ -644,6 +645,7 @@ void acpi_unregister_gsi(u32 gsi)
 
 	iosapic_unregister_intr(gsi);
 }
+EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
 
 static int __init acpi_parse_fadt(struct acpi_table_header *table)
 {

arch/powerpc/platforms/pseries/processor_idle.c

@@ -36,7 +36,7 @@ static struct cpuidle_state *cpuidle_state_table;
 static inline void idle_loop_prolog(unsigned long *in_purr, ktime_t *kt_before)
 {
 
-	*kt_before = ktime_get_real();
+	*kt_before = ktime_get();
 	*in_purr = mfspr(SPRN_PURR);
 	/*
 	 * Indicate to the HV that we are idle. Now would be
@@ -50,7 +50,7 @@ static inline  s64 idle_loop_epilog(unsigned long in_purr, ktime_t kt_before)
 	get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr;
 	get_lppaca()->idle = 0;
 
-	return ktime_to_us(ktime_sub(ktime_get_real(), kt_before));
+	return ktime_to_us(ktime_sub(ktime_get(), kt_before));
 }
 
 static int snooze_loop(struct cpuidle_device *dev,

arch/x86/include/asm/device.h

@@ -2,9 +2,6 @@
 #define _ASM_X86_DEVICE_H
 
 struct dev_archdata {
-#ifdef CONFIG_ACPI
-	void	*acpi_handle;
-#endif
 #ifdef CONFIG_X86_DEV_DMA_OPS
 	struct dma_map_ops *dma_ops;
 #endif

arch/x86/kernel/acpi/boot.c

@@ -574,6 +574,12 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
 
 	return irq;
 }
+EXPORT_SYMBOL_GPL(acpi_register_gsi);
+
+void acpi_unregister_gsi(u32 gsi)
+{
+}
+EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
 
 void __init acpi_set_irq_model_pic(void)
 {

arch/x86/kernel/acpi/sleep.c

@@ -101,6 +101,8 @@ static int __init acpi_sleep_setup(char *str)
 #endif
 		if (strncmp(str, "nonvs", 5) == 0)
 			acpi_nvs_nosave();
+		if (strncmp(str, "nonvs_s3", 8) == 0)
+			acpi_nvs_nosave_s3();
 		if (strncmp(str, "old_ordering", 12) == 0)
 			acpi_old_suspend_ordering();
 		str = strchr(str, ',');

drivers/acpi/Kconfig

@@ -181,6 +181,12 @@ config ACPI_DOCK
 	  This driver supports ACPI-controlled docking stations and removable
 	  drive bays such as the IBM Ultrabay and the Dell Module Bay.
 
+config ACPI_I2C
+	def_tristate I2C
+	depends on I2C
+	help
+	  ACPI I2C enumeration support.
+
 config ACPI_PROCESSOR
 	tristate "Processor"
 	select THERMAL

drivers/acpi/Makefile

@@ -21,9 +21,10 @@ obj-y				+= acpi.o \
 acpi-y				+= osl.o utils.o reboot.o
 acpi-y				+= nvs.o
 
-# sleep related files
+# Power management related files
 acpi-y				+= wakeup.o
 acpi-y				+= sleep.o
+acpi-$(CONFIG_PM)		+= device_pm.o
 acpi-$(CONFIG_ACPI_SLEEP)	+= proc.o
 
 
@@ -32,10 +33,12 @@ acpi-$(CONFIG_ACPI_SLEEP)	+= proc.o
 #
 acpi-y				+= bus.o glue.o
 acpi-y				+= scan.o
+acpi-y				+= resource.o
 acpi-y				+= processor_core.o
 acpi-y				+= ec.o
 acpi-$(CONFIG_ACPI_DOCK)	+= dock.o
 acpi-y				+= pci_root.o pci_link.o pci_irq.o pci_bind.o
+acpi-y				+= acpi_platform.o
 acpi-y				+= power.o
 acpi-y				+= event.o
 acpi-y				+= sysfs.o
@@ -67,6 +70,7 @@ obj-$(CONFIG_ACPI_HED)		+= hed.o
 obj-$(CONFIG_ACPI_EC_DEBUGFS)	+= ec_sys.o
 obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
 obj-$(CONFIG_ACPI_BGRT)		+= bgrt.o
+obj-$(CONFIG_ACPI_I2C)		+= acpi_i2c.o
 
 # processor has its own "processor." module_param namespace
 processor-y			:= processor_driver.o processor_throttling.o

drivers/acpi/acpi_i2c.c

@@ -0,0 +1,103 @@
+/*
+ * ACPI I2C enumeration support
+ *
+ * Copyright (C) 2012, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/i2c.h>
+#include <linux/ioport.h>
+
+ACPI_MODULE_NAME("i2c");
+
+static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data)
+{
+	struct i2c_board_info *info = data;
+
+	if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+		struct acpi_resource_i2c_serialbus *sb;
+
+		sb = &ares->data.i2c_serial_bus;
+		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+			info->addr = sb->slave_address;
+			if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+				info->flags |= I2C_CLIENT_TEN;
+		}
+	} else if (info->irq < 0) {
+		struct resource r;
+
+		if (acpi_dev_resource_interrupt(ares, 0, &r))
+			info->irq = r.start;
+	}
+
+	/* Tell the ACPI core to skip this resource */
+	return 1;
+}
+
+static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
+				       void *data, void **return_value)
+{
+	struct i2c_adapter *adapter = data;
+	struct list_head resource_list;
+	struct i2c_board_info info;
+	struct acpi_device *adev;
+	int ret;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+	if (acpi_bus_get_status(adev) || !adev->status.present)
+		return AE_OK;
+
+	memset(&info, 0, sizeof(info));
+	info.acpi_node.handle = handle;
+	info.irq = -1;
+
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list,
+				     acpi_i2c_add_resource, &info);
+	acpi_dev_free_resource_list(&resource_list);
+
+	if (ret < 0 || !info.addr)
+		return AE_OK;
+
+	strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type));
+	if (!i2c_new_device(adapter, &info)) {
+		dev_err(&adapter->dev,
+			"failed to add I2C device %s from ACPI\n",
+			dev_name(&adev->dev));
+	}
+
+	return AE_OK;
+}
+
+/**
+ * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter
+ * @adapter: pointer to adapter
+ *
+ * Enumerate all I2C slave devices behind this adapter by walking the ACPI
+ * namespace. When a device is found it will be added to the Linux device
+ * model and bound to the corresponding ACPI handle.
+ */
+void acpi_i2c_register_devices(struct i2c_adapter *adapter)
+{
+	acpi_handle handle;
+	acpi_status status;
+
+	handle = ACPI_HANDLE(&adapter->dev);
+	if (!handle)
+		return;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+				     acpi_i2c_add_device, NULL,
+				     adapter, NULL);
+	if (ACPI_FAILURE(status))
+		dev_warn(&adapter->dev, "failed to enumerate I2C slaves\n");
+}
+EXPORT_SYMBOL_GPL(acpi_i2c_register_devices);

drivers/acpi/acpi_memhotplug.c

@@ -31,6 +31,7 @@
 #include <linux/types.h>
 #include <linux/memory_hotplug.h>
 #include <linux/slab.h>
+#include <linux/acpi.h>
 #include <acpi/acpi_drivers.h>
 
 #define ACPI_MEMORY_DEVICE_CLASS		"memory"
@@ -78,6 +79,7 @@ struct acpi_memory_info {
 	unsigned short caching;	/* memory cache attribute */
 	unsigned short write_protect;	/* memory read/write attribute */
 	unsigned int enabled:1;
+	unsigned int failed:1;
 };
 
 struct acpi_memory_device {
@@ -86,8 +88,6 @@ struct acpi_memory_device {
 	struct list_head res_list;
 };
 
-static int acpi_hotmem_initialized;
-
 static acpi_status
 acpi_memory_get_resource(struct acpi_resource *resource, void *context)
 {
@@ -125,12 +125,20 @@ acpi_memory_get_resource(struct acpi_resource *resource, void *context)
 	return AE_OK;
 }
 
+static void
+acpi_memory_free_device_resources(struct acpi_memory_device *mem_device)
+{
+	struct acpi_memory_info *info, *n;
+
+	list_for_each_entry_safe(info, n, &mem_device->res_list, list)
+		kfree(info);
+	INIT_LIST_HEAD(&mem_device->res_list);
+}
+
 static int
 acpi_memory_get_device_resources(struct acpi_memory_device *mem_device)
 {
 	acpi_status status;
-	struct acpi_memory_info *info, *n;
-
 
 	if (!list_empty(&mem_device->res_list))
 		return 0;
@@ -138,9 +146,7 @@ acpi_memory_get_device_resources(struct acpi_memory_device *mem_device)
 	status = acpi_walk_resources(mem_device->device->handle, METHOD_NAME__CRS,
 				     acpi_memory_get_resource, mem_device);
 	if (ACPI_FAILURE(status)) {
-		list_for_each_entry_safe(info, n, &mem_device->res_list, list)
+		acpi_memory_free_device_resources(mem_device);
-			kfree(info);
-		INIT_LIST_HEAD(&mem_device->res_list);
 		return -EINVAL;
 	}
 
@@ -170,7 +176,7 @@ acpi_memory_get_device(acpi_handle handle,
 	/* Get the parent device */
 	result = acpi_bus_get_device(phandle, &pdevice);
 	if (result) {
-		printk(KERN_WARNING PREFIX "Cannot get acpi bus device");
+		acpi_handle_warn(phandle, "Cannot get acpi bus device\n");
 		return -EINVAL;
 	}
 
@@ -180,14 +186,14 @@ acpi_memory_get_device(acpi_handle handle,
 	 */
 	result = acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE);
 	if (result) {
-		printk(KERN_WARNING PREFIX "Cannot add acpi bus");
+		acpi_handle_warn(handle, "Cannot add acpi bus\n");
 		return -EINVAL;
 	}
 
       end:
 	*mem_device = acpi_driver_data(device);
 	if (!(*mem_device)) {
-		printk(KERN_ERR "\n driver data not found");
+		dev_err(&device->dev, "driver data not found\n");
 		return -ENODEV;
 	}
 
@@ -224,7 +230,8 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
 	/* Get the range from the _CRS */
 	result = acpi_memory_get_device_resources(mem_device);
 	if (result) {
-		printk(KERN_ERR PREFIX "get_device_resources failed\n");
+		dev_err(&mem_device->device->dev,
+			"get_device_resources failed\n");
 		mem_device->state = MEMORY_INVALID_STATE;
 		return result;
 	}
@@ -251,13 +258,27 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
 			node = memory_add_physaddr_to_nid(info->start_addr);
 
 		result = add_memory(node, info->start_addr, info->length);
-		if (result)
+
+		/*
+		 * If the memory block has been used by the kernel, add_memory()
+		 * returns -EEXIST. If add_memory() returns the other error, it
+		 * means that this memory block is not used by the kernel.
+		 */
+		if (result && result != -EEXIST) {
+			info->failed = 1;
 			continue;
+		}
+
+		if (!result)
 			info->enabled = 1;
+		/*
+		 * Add num_enable even if add_memory() returns -EEXIST, so the
+		 * device is bound to this driver.
+		 */
 		num_enabled++;
 	}
 	if (!num_enabled) {
-		printk(KERN_ERR PREFIX "add_memory failed\n");
+		dev_err(&mem_device->device->dev, "add_memory failed\n");
 		mem_device->state = MEMORY_INVALID_STATE;
 		return -EINVAL;
 	}
@@ -272,68 +293,31 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
 	return 0;
 }
 
-static int acpi_memory_powerdown_device(struct acpi_memory_device *mem_device)
+static int acpi_memory_remove_memory(struct acpi_memory_device *mem_device)
 {
-	acpi_status status;
+	int result = 0;
-	struct acpi_object_list arg_list;
-	union acpi_object arg;
-	unsigned long long current_status;
-
-
-	/* Issue the _EJ0 command */
-	arg_list.count = 1;
-	arg_list.pointer = &arg;
-	arg.type = ACPI_TYPE_INTEGER;
-	arg.integer.value = 1;
-	status = acpi_evaluate_object(mem_device->device->handle,
-				      "_EJ0", &arg_list, NULL);
-	/* Return on _EJ0 failure */
-	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "_EJ0 failed"));
-		return -ENODEV;
-	}
-
-	/* Evalute _STA to check if the device is disabled */
-	status = acpi_evaluate_integer(mem_device->device->handle, "_STA",
-				       NULL, &current_status);
-	if (ACPI_FAILURE(status))
-		return -ENODEV;
-
-	/* Check for device status.  Device should be disabled */
-	if (current_status & ACPI_STA_DEVICE_ENABLED)
-		return -EINVAL;
-
-	return 0;
-}
-
-static int acpi_memory_disable_device(struct acpi_memory_device *mem_device)
-{
-	int result;
 	struct acpi_memory_info *info, *n;
 
-
-	/*
-	 * Ask the VM to offline this memory range.
-	 * Note: Assume that this function returns zero on success
-	 */
 	list_for_each_entry_safe(info, n, &mem_device->res_list, list) {
-		if (info->enabled) {
+		if (info->failed)
+			/* The kernel does not use this memory block */
+			continue;
+
+		if (!info->enabled)
+			/*
+			 * The kernel uses this memory block, but it may be not
+			 * managed by us.
+			 */
+			return -EBUSY;
+
 		result = remove_memory(info->start_addr, info->length);
 		if (result)
 			return result;
-		}
+
+		list_del(&info->list);
 		kfree(info);
 	}
 
-	/* Power-off and eject the device */
-	result = acpi_memory_powerdown_device(mem_device);
-	if (result) {
-		/* Set the status of the device to invalid */
-		mem_device->state = MEMORY_INVALID_STATE;
-		return result;
-	}
-
-	mem_device->state = MEMORY_POWER_OFF_STATE;
 	return result;
 }
 
@@ -341,6 +325,7 @@ static void acpi_memory_device_notify(acpi_handle handle, u32 event, void *data)
 {
 	struct acpi_memory_device *mem_device;
 	struct acpi_device *device;
+	struct acpi_eject_event *ej_event = NULL;
 	u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; /* default */
 
 	switch (event) {
@@ -353,7 +338,7 @@ static void acpi_memory_device_notify(acpi_handle handle, u32 event, void *data)
 			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 					  "\nReceived DEVICE CHECK notification for device\n"));
 		if (acpi_memory_get_device(handle, &mem_device)) {
-			printk(KERN_ERR PREFIX "Cannot find driver data\n");
+			acpi_handle_err(handle, "Cannot find driver data\n");
 			break;
 		}
 
@@ -361,7 +346,7 @@ static void acpi_memory_device_notify(acpi_handle handle, u32 event, void *data)
 			break;
 
 		if (acpi_memory_enable_device(mem_device)) {
-			printk(KERN_ERR PREFIX "Cannot enable memory device\n");
+			acpi_handle_err(handle,"Cannot enable memory device\n");
 			break;
 		}
 
@@ -373,40 +358,28 @@ static void acpi_memory_device_notify(acpi_handle handle, u32 event, void *data)
 				  "\nReceived EJECT REQUEST notification for device\n"));
 
 		if (acpi_bus_get_device(handle, &device)) {
-			printk(KERN_ERR PREFIX "Device doesn't exist\n");
+			acpi_handle_err(handle, "Device doesn't exist\n");
 			break;
 		}
 		mem_device = acpi_driver_data(device);
 		if (!mem_device) {
-			printk(KERN_ERR PREFIX "Driver Data is NULL\n");
+			acpi_handle_err(handle, "Driver Data is NULL\n");
 			break;
 		}
 
-		/*
+		ej_event = kmalloc(sizeof(*ej_event), GFP_KERNEL);
-		 * Currently disabling memory device from kernel mode
+		if (!ej_event) {
-		 * TBD: Can also be disabled from user mode scripts
+			pr_err(PREFIX "No memory, dropping EJECT\n");
-		 * TBD: Can also be disabled by Callback registration
-		 *      with generic sysfs driver
-		 */
-		if (acpi_memory_disable_device(mem_device)) {
-			printk(KERN_ERR PREFIX "Disable memory device\n");
-			/*
-			 * If _EJ0 was called but failed, _OST is not
-			 * necessary.
-			 */
-			if (mem_device->state == MEMORY_INVALID_STATE)
-				return;
-
 			break;
 		}
 
-		/*
+		ej_event->handle = handle;
-		 * TBD: Invoke acpi_bus_remove to cleanup data structures
+		ej_event->event = ACPI_NOTIFY_EJECT_REQUEST;
-		 */
+		acpi_os_hotplug_execute(acpi_bus_hot_remove_device,
+					(void *)ej_event);
 
-		/* _EJ0 succeeded; _OST is not necessary */
+		/* eject is performed asynchronously */
 		return;
-
 	default:
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 				  "Unsupported event [0x%x]\n", event));
@@ -420,6 +393,15 @@ static void acpi_memory_device_notify(acpi_handle handle, u32 event, void *data)
 	return;
 }
 
+static void acpi_memory_device_free(struct acpi_memory_device *mem_device)
+{
+	if (!mem_device)
+		return;
+
+	acpi_memory_free_device_resources(mem_device);
+	kfree(mem_device);
+}
+
 static int acpi_memory_device_add(struct acpi_device *device)
 {
 	int result;
@@ -449,23 +431,16 @@ static int acpi_memory_device_add(struct acpi_device *device)
 	/* Set the device state */
 	mem_device->state = MEMORY_POWER_ON_STATE;
 
-	printk(KERN_DEBUG "%s \n", acpi_device_name(device));
+	pr_debug("%s\n", acpi_device_name(device));
-
-	/*
-	 * Early boot code has recognized memory area by EFI/E820.
-	 * If DSDT shows these memory devices on boot, hotplug is not necessary
-	 * for them. So, it just returns until completion of this driver's
-	 * start up.
-	 */
-	if (!acpi_hotmem_initialized)
-		return 0;
 
 	if (!acpi_memory_check_device(mem_device)) {
 		/* call add_memory func */
 		result = acpi_memory_enable_device(mem_device);
-		if (result)
+		if (result) {
-			printk(KERN_ERR PREFIX
+			dev_err(&device->dev,
 				"Error in acpi_memory_enable_device\n");
+			acpi_memory_device_free(mem_device);
+		}
 	}
 	return result;
 }
@@ -473,13 +448,18 @@ static int acpi_memory_device_add(struct acpi_device *device)
 static int acpi_memory_device_remove(struct acpi_device *device, int type)
 {
 	struct acpi_memory_device *mem_device = NULL;
-
+	int result;
 
 	if (!device || !acpi_driver_data(device))
 		return -EINVAL;
 
 	mem_device = acpi_driver_data(device);
-	kfree(mem_device);
+
+	result = acpi_memory_remove_memory(mem_device);
+	if (result)
+		return result;
+
+	acpi_memory_device_free(mem_device);
 
 	return 0;
 }
@@ -568,7 +548,6 @@ static int __init acpi_memory_device_init(void)
 		return -ENODEV;
 	}
 
-	acpi_hotmem_initialized = 1;
 	return 0;
 }
 

drivers/acpi/acpi_pad.c

@@ -286,7 +286,7 @@ static ssize_t acpi_pad_rrtime_store(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t count)
 {
 	unsigned long num;
-	if (strict_strtoul(buf, 0, &num))
+	if (kstrtoul(buf, 0, &num))
 		return -EINVAL;
 	if (num < 1 || num >= 100)
 		return -EINVAL;
@@ -309,7 +309,7 @@ static ssize_t acpi_pad_idlepct_store(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t count)
 {
 	unsigned long num;
-	if (strict_strtoul(buf, 0, &num))
+	if (kstrtoul(buf, 0, &num))
 		return -EINVAL;
 	if (num < 1 || num >= 100)
 		return -EINVAL;
@@ -332,7 +332,7 @@ static ssize_t acpi_pad_idlecpus_store(struct device *dev,
 	struct device_attribute *attr, const char *buf, size_t count)
 {
 	unsigned long num;
-	if (strict_strtoul(buf, 0, &num))
+	if (kstrtoul(buf, 0, &num))
 		return -EINVAL;
 	mutex_lock(&isolated_cpus_lock);
 	acpi_pad_idle_cpus(num);
@@ -457,7 +457,7 @@ static void acpi_pad_notify(acpi_handle handle, u32 event,
 			dev_name(&device->dev), event, 0);
 		break;
 	default:
-		printk(KERN_WARNING "Unsupported event [0x%x]\n", event);
+		pr_warn("Unsupported event [0x%x]\n", event);
 		break;
 	}
 }

drivers/acpi/acpi_platform.c

@@ -0,0 +1,104 @@
+/*
+ * ACPI support for platform bus type.
+ *
+ * Copyright (C) 2012, Intel Corporation
+ * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *          Mathias Nyman <mathias.nyman@linux.intel.com>
+ *          Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "internal.h"
+
+ACPI_MODULE_NAME("platform");
+
+/**
+ * acpi_create_platform_device - Create platform device for ACPI device node
+ * @adev: ACPI device node to create a platform device for.
+ *
+ * Check if the given @adev can be represented as a platform device and, if
+ * that's the case, create and register a platform device, populate its common
+ * resources and returns a pointer to it.  Otherwise, return %NULL.
+ *
+ * The platform device's name will be taken from the @adev's _HID and _UID.
+ */
+struct platform_device *acpi_create_platform_device(struct acpi_device *adev)
+{
+	struct platform_device *pdev = NULL;
+	struct acpi_device *acpi_parent;
+	struct platform_device_info pdevinfo;
+	struct resource_list_entry *rentry;
+	struct list_head resource_list;
+	struct resource *resources;
+	int count;
+
+	/* If the ACPI node already has a physical device attached, skip it. */
+	if (adev->physical_node_count)
+		return NULL;
+
+	INIT_LIST_HEAD(&resource_list);
+	count = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
+	if (count <= 0)
+		return NULL;
+
+	resources = kmalloc(count * sizeof(struct resource), GFP_KERNEL);
+	if (!resources) {
+		dev_err(&adev->dev, "No memory for resources\n");
+		acpi_dev_free_resource_list(&resource_list);
+		return NULL;
+	}
+	count = 0;
+	list_for_each_entry(rentry, &resource_list, node)
+		resources[count++] = rentry->res;
+
+	acpi_dev_free_resource_list(&resource_list);
+
+	memset(&pdevinfo, 0, sizeof(pdevinfo));
+	/*
+	 * If the ACPI node has a parent and that parent has a physical device
+	 * attached to it, that physical device should be the parent of the
+	 * platform device we are about to create.
+	 */
+	pdevinfo.parent = NULL;
+	acpi_parent = adev->parent;
+	if (acpi_parent) {
+		struct acpi_device_physical_node *entry;
+		struct list_head *list;
+
+		mutex_lock(&acpi_parent->physical_node_lock);
+		list = &acpi_parent->physical_node_list;
+		if (!list_empty(list)) {
+			entry = list_first_entry(list,
+					struct acpi_device_physical_node,
+					node);
+			pdevinfo.parent = entry->dev;
+		}
+		mutex_unlock(&acpi_parent->physical_node_lock);
+	}
+	pdevinfo.name = dev_name(&adev->dev);
+	pdevinfo.id = -1;
+	pdevinfo.res = resources;
+	pdevinfo.num_res = count;
+	pdevinfo.acpi_node.handle = adev->handle;
+	pdev = platform_device_register_full(&pdevinfo);
+	if (IS_ERR(pdev)) {
+		dev_err(&adev->dev, "platform device creation failed: %ld\n",
+			PTR_ERR(pdev));
+		pdev = NULL;
+	} else {
+		dev_dbg(&adev->dev, "created platform device %s\n",
+			dev_name(&pdev->dev));
+	}
+
+	kfree(resources);
+	return pdev;
+}

drivers/acpi/acpica/Makefile

@@ -161,3 +161,6 @@ acpi-y +=		\
 	utxfinit.o	\
 	utxferror.o	\
 	utxfmutex.o
+
+acpi-$(ACPI_FUTURE_USAGE) += uttrack.o utcache.o utclib.o
+

drivers/acpi/acpica/acdebug.h

@@ -44,17 +44,28 @@
 #ifndef __ACDEBUG_H__
 #define __ACDEBUG_H__
 
-#define ACPI_DEBUG_BUFFER_SIZE  4196
+#define ACPI_DEBUG_BUFFER_SIZE  0x4000	/* 16K buffer for return objects */
 
-struct command_info {
+struct acpi_db_command_info {
 	char *name;		/* Command Name */
 	u8 min_args;		/* Minimum arguments required */
 };
 
-struct argument_info {
+struct acpi_db_command_help {
+	u8 line_count;		/* Number of help lines */
+	char *invocation;	/* Command Invocation */
+	char *description;	/* Command Description */
+};
+
+struct acpi_db_argument_info {
 	char *name;		/* Argument Name */
 };
 
+struct acpi_db_execute_walk {
+	u32 count;
+	u32 max_count;
+};
+
 #define PARAM_LIST(pl)                  pl
 #define DBTEST_OUTPUT_LEVEL(lvl)        if (acpi_gbl_db_opt_verbose)
 #define VERBOSE_PRINT(fp)               DBTEST_OUTPUT_LEVEL(lvl) {\
@@ -77,43 +88,19 @@ acpi_db_single_step(struct acpi_walk_state *walk_state,
 /*
  * dbcmds - debug commands and output routines
  */
-acpi_status acpi_db_disassemble_method(char *name);
+struct acpi_namespace_node *acpi_db_convert_to_node(char *in_string);
 
 void acpi_db_display_table_info(char *table_arg);
 
-void acpi_db_unload_acpi_table(char *table_arg, char *instance_arg);
+void acpi_db_display_template(char *buffer_arg);
 
-void
+void acpi_db_unload_acpi_table(char *name);
-acpi_db_set_method_breakpoint(char *location,
-			      struct acpi_walk_state *walk_state,
-			      union acpi_parse_object *op);
-
-void acpi_db_set_method_call_breakpoint(union acpi_parse_object *op);
-
-void acpi_db_get_bus_info(void);
-
-void acpi_db_disassemble_aml(char *statements, union acpi_parse_object *op);
-
-void acpi_db_dump_namespace(char *start_arg, char *depth_arg);
-
-void acpi_db_dump_namespace_by_owner(char *owner_arg, char *depth_arg);
 
 void acpi_db_send_notify(char *name, u32 value);
 
-void acpi_db_set_method_data(char *type_arg, char *index_arg, char *value_arg);
-
-acpi_status
-acpi_db_display_objects(char *obj_type_arg, char *display_count_arg);
-
 void acpi_db_display_interfaces(char *action_arg, char *interface_name_arg);
 
-acpi_status acpi_db_find_name_in_namespace(char *name_arg);
+acpi_status acpi_db_sleep(char *object_arg);
-
-void acpi_db_set_scope(char *name);
-
-ACPI_HW_DEPENDENT_RETURN_OK(acpi_status acpi_db_sleep(char *object_arg))
-
-void acpi_db_find_references(char *object_arg);
 
 void acpi_db_display_locks(void);
 
@@ -121,15 +108,51 @@ void acpi_db_display_resources(char *object_arg);
 
 ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_db_display_gpes(void))
 
-void acpi_db_check_integrity(void);
+void acpi_db_display_handlers(void);
 
 ACPI_HW_DEPENDENT_RETURN_VOID(void
 			      acpi_db_generate_gpe(char *gpe_arg,
 						   char *block_arg))
 
+/*
+ * dbmethod - control method commands
+ */
+void
+acpi_db_set_method_breakpoint(char *location,
+			      struct acpi_walk_state *walk_state,
+			      union acpi_parse_object *op);
+
+void acpi_db_set_method_call_breakpoint(union acpi_parse_object *op);
+
+void acpi_db_set_method_data(char *type_arg, char *index_arg, char *value_arg);
+
+acpi_status acpi_db_disassemble_method(char *name);
+
+void acpi_db_disassemble_aml(char *statements, union acpi_parse_object *op);
+
+void acpi_db_batch_execute(char *count_arg);
+
+/*
+ * dbnames - namespace commands
+ */
+void acpi_db_set_scope(char *name);
+
+void acpi_db_dump_namespace(char *start_arg, char *depth_arg);
+
+void acpi_db_dump_namespace_by_owner(char *owner_arg, char *depth_arg);
+
+acpi_status acpi_db_find_name_in_namespace(char *name_arg);
+
 void acpi_db_check_predefined_names(void);
 
-void acpi_db_batch_execute(void);
+acpi_status
+acpi_db_display_objects(char *obj_type_arg, char *display_count_arg);
+
+void acpi_db_check_integrity(void);
+
+void acpi_db_find_references(char *object_arg);
+
+void acpi_db_get_bus_info(void);
 
 /*
  * dbdisply - debug display commands
@@ -161,7 +184,8 @@ acpi_db_display_argument_object(union acpi_operand_object *obj_desc,
 /*
  * dbexec - debugger control method execution
  */
-void acpi_db_execute(char *name, char **args, u32 flags);
+void
+acpi_db_execute(char *name, char **args, acpi_object_type * types, u32 flags);
 
 void
 acpi_db_create_execution_threads(char *num_threads_arg,
@@ -175,7 +199,8 @@ u32 acpi_db_get_cache_info(struct acpi_memory_list *cache);
  * dbfileio - Debugger file I/O commands
  */
 acpi_object_type
-acpi_db_match_argument(char *user_argument, struct argument_info *arguments);
+acpi_db_match_argument(char *user_argument,
+		       struct acpi_db_argument_info *arguments);
 
 void acpi_db_close_debug_file(void);
 
@@ -208,6 +233,11 @@ acpi_db_command_dispatch(char *input_buffer,
 
 void ACPI_SYSTEM_XFACE acpi_db_execute_thread(void *context);
 
+acpi_status acpi_db_user_commands(char prompt, union acpi_parse_object *op);
+
+char *acpi_db_get_next_token(char *string,
+			     char **next, acpi_object_type * return_type);
+
 /*
  * dbstats - Generation and display of ACPI table statistics
  */

drivers/acpi/acpica/acdispat.h

@@ -309,9 +309,12 @@ acpi_ds_obj_stack_push(void *object, struct acpi_walk_state *walk_state);
 acpi_status
 acpi_ds_obj_stack_pop(u32 pop_count, struct acpi_walk_state *walk_state);
 
-struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id, union acpi_parse_object
+struct acpi_walk_state * acpi_ds_create_walk_state(acpi_owner_id owner_id,
-						  *origin, union acpi_operand_object
+						   union acpi_parse_object
-						  *mth_desc, struct acpi_thread_state
+						   *origin,
+						   union acpi_operand_object
+						   *mth_desc,
+						   struct acpi_thread_state
 						   *thread);
 
 acpi_status

drivers/acpi/acpica/acevents.h

@@ -84,9 +84,11 @@ acpi_ev_update_gpe_enable_mask(struct acpi_gpe_event_info *gpe_event_info);
 
 acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info);
 
-acpi_status acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
+acpi_status
+acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
 
-acpi_status acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
+acpi_status
+acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info);
 
 struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
 						       u32 gpe_number);

drivers/acpi/acpica/acglobal.h

@@ -153,26 +153,6 @@ u8 acpi_gbl_reduced_hardware;
 
 ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_no_resource_disassembly, FALSE);
 
-/*****************************************************************************
- *
- * Debug support
- *
- ****************************************************************************/
-
-/* Procedure nesting level for debug output */
-
-extern u32 acpi_gbl_nesting_level;
-
-ACPI_EXTERN u32 acpi_gpe_count;
-ACPI_EXTERN u32 acpi_fixed_event_count[ACPI_NUM_FIXED_EVENTS];
-
-/* Support for dynamic control method tracing mechanism */
-
-ACPI_EXTERN u32 acpi_gbl_original_dbg_level;
-ACPI_EXTERN u32 acpi_gbl_original_dbg_layer;
-ACPI_EXTERN u32 acpi_gbl_trace_dbg_level;
-ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer;
-
 /*****************************************************************************
  *
  * ACPI Table globals
@@ -259,15 +239,6 @@ ACPI_EXTERN acpi_spinlock acpi_gbl_hardware_lock;	/* For ACPI H/W except GPE reg
  *
  ****************************************************************************/
 
-#ifdef ACPI_DBG_TRACK_ALLOCATIONS
-
-/* Lists for tracking memory allocations */
-
-ACPI_EXTERN struct acpi_memory_list *acpi_gbl_global_list;
-ACPI_EXTERN struct acpi_memory_list *acpi_gbl_ns_node_list;
-ACPI_EXTERN u8 acpi_gbl_display_final_mem_stats;
-#endif
-
 /* Object caches */
 
 ACPI_EXTERN acpi_cache_t *acpi_gbl_namespace_cache;
@@ -326,6 +297,15 @@ extern const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS];
 
 #endif
 
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+
+/* Lists for tracking memory allocations */
+
+ACPI_EXTERN struct acpi_memory_list *acpi_gbl_global_list;
+ACPI_EXTERN struct acpi_memory_list *acpi_gbl_ns_node_list;
+ACPI_EXTERN u8 acpi_gbl_display_final_mem_stats;
+#endif
+
 /*****************************************************************************
  *
  * Namespace globals
@@ -396,11 +376,33 @@ ACPI_EXTERN struct acpi_gpe_block_info
 #if (!ACPI_REDUCED_HARDWARE)
 
 ACPI_EXTERN u8 acpi_gbl_all_gpes_initialized;
-ACPI_EXTERN ACPI_GBL_EVENT_HANDLER acpi_gbl_global_event_handler;
+ACPI_EXTERN acpi_gbl_event_handler acpi_gbl_global_event_handler;
 ACPI_EXTERN void *acpi_gbl_global_event_handler_context;
 
 #endif				/* !ACPI_REDUCED_HARDWARE */
 
+/*****************************************************************************
+ *
+ * Debug support
+ *
+ ****************************************************************************/
+
+/* Procedure nesting level for debug output */
+
+extern u32 acpi_gbl_nesting_level;
+
+/* Event counters */
+
+ACPI_EXTERN u32 acpi_gpe_count;
+ACPI_EXTERN u32 acpi_fixed_event_count[ACPI_NUM_FIXED_EVENTS];
+
+/* Support for dynamic control method tracing mechanism */
+
+ACPI_EXTERN u32 acpi_gbl_original_dbg_level;
+ACPI_EXTERN u32 acpi_gbl_original_dbg_layer;
+ACPI_EXTERN u32 acpi_gbl_trace_dbg_level;
+ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer;
+
 /*****************************************************************************
  *
  * Debugger globals
@@ -426,10 +428,11 @@ ACPI_EXTERN u8 acpi_gbl_db_opt_stats;
 ACPI_EXTERN u8 acpi_gbl_db_opt_ini_methods;
 
 ACPI_EXTERN char *acpi_gbl_db_args[ACPI_DEBUGGER_MAX_ARGS];
-ACPI_EXTERN char acpi_gbl_db_line_buf[80];
+ACPI_EXTERN acpi_object_type acpi_gbl_db_arg_types[ACPI_DEBUGGER_MAX_ARGS];
-ACPI_EXTERN char acpi_gbl_db_parsed_buf[80];
+ACPI_EXTERN char acpi_gbl_db_line_buf[ACPI_DB_LINE_BUFFER_SIZE];
-ACPI_EXTERN char acpi_gbl_db_scope_buf[40];
+ACPI_EXTERN char acpi_gbl_db_parsed_buf[ACPI_DB_LINE_BUFFER_SIZE];
-ACPI_EXTERN char acpi_gbl_db_debug_filename[40];
+ACPI_EXTERN char acpi_gbl_db_scope_buf[80];
+ACPI_EXTERN char acpi_gbl_db_debug_filename[80];
 ACPI_EXTERN u8 acpi_gbl_db_output_to_file;
 ACPI_EXTERN char *acpi_gbl_db_buffer;
 ACPI_EXTERN char *acpi_gbl_db_filename;

drivers/acpi/acpica/aclocal.h

@@ -262,7 +262,7 @@ struct acpi_create_field_info {
 };
 
 typedef
-acpi_status(*ACPI_INTERNAL_METHOD) (struct acpi_walk_state * walk_state);
+acpi_status(*acpi_internal_method) (struct acpi_walk_state * walk_state);
 
 /*
  * Bitmapped ACPI types. Used internally only
@@ -486,8 +486,10 @@ struct acpi_gpe_device_info {
 	struct acpi_namespace_node *gpe_device;
 };
 
-typedef acpi_status(*acpi_gpe_callback) (struct acpi_gpe_xrupt_info *gpe_xrupt_info,
+typedef acpi_status(*acpi_gpe_callback) (struct acpi_gpe_xrupt_info *
-		struct acpi_gpe_block_info *gpe_block, void *context);
+					 gpe_xrupt_info,
+					 struct acpi_gpe_block_info *gpe_block,
+					 void *context);
 
 /* Information about each particular fixed event */
 
@@ -645,7 +647,7 @@ union acpi_generic_state {
  *
  ****************************************************************************/
 
-typedef acpi_status(*ACPI_EXECUTE_OP) (struct acpi_walk_state * walk_state);
+typedef acpi_status(*acpi_execute_op) (struct acpi_walk_state * walk_state);
 
 /* Address Range info block */
 
@@ -1031,6 +1033,7 @@ struct acpi_db_method_info {
 	acpi_handle method;
 	acpi_handle main_thread_gate;
 	acpi_handle thread_complete_gate;
+	acpi_handle info_gate;
 	acpi_thread_id *threads;
 	u32 num_threads;
 	u32 num_created;
@@ -1041,6 +1044,7 @@ struct acpi_db_method_info {
 	u32 num_loops;
 	char pathname[128];
 	char **args;
+	acpi_object_type *types;
 
 	/*
 	 * Arguments to be passed to method for the command

drivers/acpi/acpica/acmacros.h

@@ -196,18 +196,6 @@
 #endif
 #endif
 
-/* Macros based on machine integer width */
-
-#if ACPI_MACHINE_WIDTH == 32
-#define ACPI_MOVE_SIZE_TO_16(d, s)       ACPI_MOVE_32_TO_16(d, s)
-
-#elif ACPI_MACHINE_WIDTH == 64
-#define ACPI_MOVE_SIZE_TO_16(d, s)       ACPI_MOVE_64_TO_16(d, s)
-
-#else
-#error unknown ACPI_MACHINE_WIDTH
-#endif
-
 /*
  * Fast power-of-two math macros for non-optimized compilers
  */
@@ -355,7 +343,6 @@
  * Ascii error messages can be configured out
  */
 #ifndef ACPI_NO_ERROR_MESSAGES
-
 /*
  * Error reporting. Callers module and line number are inserted by AE_INFO,
  * the plist contains a set of parens to allow variable-length lists.
@@ -381,12 +368,9 @@
  * Debug macros that are conditionally compiled
  */
 #ifdef ACPI_DEBUG_OUTPUT
-
 /*
  * Function entry tracing
  */
-#ifdef CONFIG_ACPI_DEBUG_FUNC_TRACE
-
 #define ACPI_FUNCTION_TRACE(a)          ACPI_FUNCTION_NAME(a) \
 			  acpi_ut_trace(ACPI_DEBUG_PARAMETERS)
 #define ACPI_FUNCTION_TRACE_PTR(a, b)   ACPI_FUNCTION_NAME(a) \
@@ -464,45 +448,19 @@
 
 #endif				/* ACPI_SIMPLE_RETURN_MACROS */
 
-#else /* !CONFIG_ACPI_DEBUG_FUNC_TRACE */
-
-#define ACPI_FUNCTION_TRACE(a)
-#define ACPI_FUNCTION_TRACE_PTR(a,b)
-#define ACPI_FUNCTION_TRACE_U32(a,b)
-#define ACPI_FUNCTION_TRACE_STR(a,b)
-#define ACPI_FUNCTION_EXIT
-#define ACPI_FUNCTION_STATUS_EXIT(s)
-#define ACPI_FUNCTION_VALUE_EXIT(s)
-#define ACPI_FUNCTION_TRACE(a)
-#define ACPI_FUNCTION_ENTRY()
-
-#define return_VOID                     return
-#define return_ACPI_STATUS(s)           return(s)
-#define return_VALUE(s)                 return(s)
-#define return_UINT8(s)                 return(s)
-#define return_UINT32(s)                return(s)
-#define return_PTR(s)                   return(s)
-
-#endif /* CONFIG_ACPI_DEBUG_FUNC_TRACE */
-
 /* Conditional execution */
 
 #define ACPI_DEBUG_EXEC(a)              a
-#define ACPI_NORMAL_EXEC(a)
-
-#define ACPI_DEBUG_DEFINE(a)            a;
 #define ACPI_DEBUG_ONLY_MEMBERS(a)      a;
 #define _VERBOSE_STRUCTURES
 
-/* Stack and buffer dumping */
+/* Various object display routines for debug */
 
 #define ACPI_DUMP_STACK_ENTRY(a)        acpi_ex_dump_operand((a), 0)
-#define ACPI_DUMP_OPERANDS(a, b, c)	acpi_ex_dump_operands(a, b, c)
+#define ACPI_DUMP_OPERANDS(a, b ,c)     acpi_ex_dump_operands(a, b, c)
-
 #define ACPI_DUMP_ENTRY(a, b)           acpi_ns_dump_entry (a, b)
 #define ACPI_DUMP_PATHNAME(a, b, c, d)  acpi_ns_dump_pathname(a, b, c, d)
-#define ACPI_DUMP_RESOURCE_LIST(a)      acpi_rs_dump_resource_list(a)
+#define ACPI_DUMP_BUFFER(a, b)          acpi_ut_debug_dump_buffer((u8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT)
-#define ACPI_DUMP_BUFFER(a, b)          acpi_ut_dump_buffer((u8 *) a, b, DB_BYTE_DISPLAY, _COMPONENT)
 
 #else
 /*
@@ -510,25 +468,23 @@
  * leaving no executable debug code!
  */
 #define ACPI_DEBUG_EXEC(a)
-#define ACPI_NORMAL_EXEC(a)             a;
+#define ACPI_DEBUG_ONLY_MEMBERS(a)
-
+#define ACPI_FUNCTION_TRACE(a)
-#define ACPI_DEBUG_DEFINE(a)		do { } while(0)
+#define ACPI_FUNCTION_TRACE_PTR(a, b)
-#define ACPI_DEBUG_ONLY_MEMBERS(a)	do { } while(0)
+#define ACPI_FUNCTION_TRACE_U32(a, b)
-#define ACPI_FUNCTION_TRACE(a)		do { } while(0)
+#define ACPI_FUNCTION_TRACE_STR(a, b)
-#define ACPI_FUNCTION_TRACE_PTR(a, b)	do { } while(0)
+#define ACPI_FUNCTION_EXIT
-#define ACPI_FUNCTION_TRACE_U32(a, b)	do { } while(0)
+#define ACPI_FUNCTION_STATUS_EXIT(s)
-#define ACPI_FUNCTION_TRACE_STR(a, b)	do { } while(0)
+#define ACPI_FUNCTION_VALUE_EXIT(s)
-#define ACPI_FUNCTION_EXIT		do { } while(0)
+#define ACPI_FUNCTION_ENTRY()
-#define ACPI_FUNCTION_STATUS_EXIT(s)	do { } while(0)
+#define ACPI_DUMP_STACK_ENTRY(a)
-#define ACPI_FUNCTION_VALUE_EXIT(s)	do { } while(0)
+#define ACPI_DUMP_OPERANDS(a, b, c)
-#define ACPI_FUNCTION_ENTRY()		do { } while(0)
+#define ACPI_DUMP_ENTRY(a, b)
-#define ACPI_DUMP_STACK_ENTRY(a)	do { } while(0)
+#define ACPI_DUMP_TABLES(a, b)
-#define ACPI_DUMP_OPERANDS(a, b, c)     do { } while(0)
+#define ACPI_DUMP_PATHNAME(a, b, c, d)
-#define ACPI_DUMP_ENTRY(a, b)		do { } while(0)
+#define ACPI_DUMP_BUFFER(a, b)
-#define ACPI_DUMP_TABLES(a, b)		do { } while(0)
+#define ACPI_DEBUG_PRINT(pl)
-#define ACPI_DUMP_PATHNAME(a, b, c, d)	do { } while(0)
+#define ACPI_DEBUG_PRINT_RAW(pl)
-#define ACPI_DUMP_RESOURCE_LIST(a)	do { } while(0)
-#define ACPI_DUMP_BUFFER(a, b)		do { } while(0)
 
 #define return_VOID                     return
 #define return_ACPI_STATUS(s)           return(s)
@@ -556,18 +512,6 @@
 #define ACPI_DEBUGGER_EXEC(a)
 #endif
 
-#ifdef ACPI_DEBUG_OUTPUT
-/*
- * 1) Set name to blanks
- * 2) Copy the object name
- */
-#define ACPI_ADD_OBJECT_NAME(a,b)       ACPI_MEMSET (a->common.name, ' ', sizeof (a->common.name));\
-										ACPI_STRNCPY (a->common.name, acpi_gbl_ns_type_names[b], sizeof (a->common.name))
-#else
-
-#define ACPI_ADD_OBJECT_NAME(a,b)
-#endif
-
 /*
  * Memory allocation tracking (DEBUG ONLY)
  */
@@ -578,13 +522,13 @@
 /* Memory allocation */
 
 #ifndef ACPI_ALLOCATE
-#define ACPI_ALLOCATE(a)            acpi_ut_allocate((acpi_size)(a), ACPI_MEM_PARAMETERS)
+#define ACPI_ALLOCATE(a)            acpi_ut_allocate((acpi_size) (a), ACPI_MEM_PARAMETERS)
 #endif
 #ifndef ACPI_ALLOCATE_ZEROED
-#define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed((acpi_size)(a), ACPI_MEM_PARAMETERS)
+#define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed((acpi_size) (a), ACPI_MEM_PARAMETERS)
 #endif
 #ifndef ACPI_FREE
-#define ACPI_FREE(a)                acpio_os_free(a)
+#define ACPI_FREE(a)                acpi_os_free(a)
 #endif
 #define ACPI_MEM_TRACKING(a)
 
@@ -592,16 +536,25 @@
 
 /* Memory allocation */
 
-#define ACPI_ALLOCATE(a)            acpi_ut_allocate_and_track((acpi_size)(a), ACPI_MEM_PARAMETERS)
+#define ACPI_ALLOCATE(a)            acpi_ut_allocate_and_track((acpi_size) (a), ACPI_MEM_PARAMETERS)
-#define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed_and_track((acpi_size)(a), ACPI_MEM_PARAMETERS)
+#define ACPI_ALLOCATE_ZEROED(a)     acpi_ut_allocate_zeroed_and_track((acpi_size) (a), ACPI_MEM_PARAMETERS)
 #define ACPI_FREE(a)                acpi_ut_free_and_track(a, ACPI_MEM_PARAMETERS)
 #define ACPI_MEM_TRACKING(a)        a
 
 #endif				/* ACPI_DBG_TRACK_ALLOCATIONS */
 
-/* Preemption point */
+/*
-#ifndef ACPI_PREEMPTION_POINT
+ * Macros used for ACPICA utilities only
-#define ACPI_PREEMPTION_POINT() /* no preemption */
+ */
-#endif
+
+/* Generate a UUID */
+
+#define ACPI_INIT_UUID(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \
+	(a) & 0xFF, ((a) >> 8) & 0xFF, ((a) >> 16) & 0xFF, ((a) >> 24) & 0xFF, \
+	(b) & 0xFF, ((b) >> 8) & 0xFF, \
+	(c) & 0xFF, ((c) >> 8) & 0xFF, \
+	(d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7)
+
+#define ACPI_IS_OCTAL_DIGIT(d)              (((char)(d) >= '0') && ((char)(d) <= '7'))
 
 #endif				/* ACMACROS_H */

drivers/acpi/acpica/acobject.h

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Name: acobject.h - Definition of union acpi_operand_object  (Internal object only)
@@ -179,7 +178,7 @@ struct acpi_object_method {
 	union acpi_operand_object *mutex;
 	u8 *aml_start;
 	union {
-		ACPI_INTERNAL_METHOD implementation;
+		acpi_internal_method implementation;
 		union acpi_operand_object *handler;
 	} dispatch;
 

drivers/acpi/acpica/acparser.h

@@ -150,8 +150,7 @@ u8 acpi_ps_has_completed_scope(struct acpi_parse_state *parser_state);
 
 void
 acpi_ps_pop_scope(struct acpi_parse_state *parser_state,
-		  union acpi_parse_object **op,
+		  union acpi_parse_object **op, u32 *arg_list, u32 *arg_count);
-		  u32 * arg_list, u32 * arg_count);
 
 acpi_status
 acpi_ps_push_scope(struct acpi_parse_state *parser_state,

drivers/acpi/acpica/acpredef.h

@@ -150,8 +150,7 @@ enum acpi_return_package_types {
  * is saved here (rather than in a separate table) in order to minimize the
  * overall size of the stored data.
  */
-static const union acpi_predefined_info predefined_names[] =
+static const union acpi_predefined_info predefined_names[] = {
-{
 	{{"_AC0", 0, ACPI_RTYPE_INTEGER}},
 	{{"_AC1", 0, ACPI_RTYPE_INTEGER}},
 	{{"_AC2", 0, ACPI_RTYPE_INTEGER}},
@@ -538,7 +537,8 @@ static const union acpi_predefined_info predefined_names[] =
 
 	/* Acpi 1.0 defined _WAK with no return value. Later, it was changed to return a package */
 
-	{{"_WAK", 1, ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}},
+	{{"_WAK", 1,
+          ACPI_RTYPE_NONE | ACPI_RTYPE_INTEGER | ACPI_RTYPE_PACKAGE}},
 			  {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 2,0}, 0,0}}, /* Fixed-length (2 Int), but is optional */
 
 	/* _WDG/_WED are MS extensions defined by "Windows Instrumentation" */
@@ -551,11 +551,12 @@ static const union acpi_predefined_info predefined_names[] =
 };
 
 #if 0
+
 	/* This is an internally implemented control method, no need to check */
-	{{"_OSI", 1, ACPI_RTYPE_INTEGER}},
+{ {
+"_OSI", 1, ACPI_RTYPE_INTEGER}},
 
 	/* TBD: */
-
 	_PRT - currently ignore reversed entries. attempt to fix here?
 	think about possibly fixing package elements like _BIF, etc.
 #endif

drivers/acpi/acpica/acutils.h

@@ -69,6 +69,22 @@ extern const char *acpi_gbl_siz_decode[];
 extern const char *acpi_gbl_trs_decode[];
 extern const char *acpi_gbl_ttp_decode[];
 extern const char *acpi_gbl_typ_decode[];
+extern const char *acpi_gbl_ppc_decode[];
+extern const char *acpi_gbl_ior_decode[];
+extern const char *acpi_gbl_dts_decode[];
+extern const char *acpi_gbl_ct_decode[];
+extern const char *acpi_gbl_sbt_decode[];
+extern const char *acpi_gbl_am_decode[];
+extern const char *acpi_gbl_sm_decode[];
+extern const char *acpi_gbl_wm_decode[];
+extern const char *acpi_gbl_cph_decode[];
+extern const char *acpi_gbl_cpo_decode[];
+extern const char *acpi_gbl_dp_decode[];
+extern const char *acpi_gbl_ed_decode[];
+extern const char *acpi_gbl_bpb_decode[];
+extern const char *acpi_gbl_sb_decode[];
+extern const char *acpi_gbl_fc_decode[];
+extern const char *acpi_gbl_pt_decode[];
 #endif
 
 /* Types for Resource descriptor entries */
@@ -79,14 +95,14 @@ extern const char *acpi_gbl_typ_decode[];
 #define ACPI_SMALL_VARIABLE_LENGTH      3
 
 typedef
-acpi_status(*acpi_walk_aml_callback) (u8 * aml,
+acpi_status(*acpi_walk_aml_callback) (u8 *aml,
 				      u32 length,
 				      u32 offset,
 				      u8 resource_index, void **context);
 
 typedef
 acpi_status(*acpi_pkg_callback) (u8 object_type,
-				 union acpi_operand_object * source_object,
+				 union acpi_operand_object *source_object,
 				 union acpi_generic_state * state,
 				 void *context);
 
@@ -202,7 +218,9 @@ extern const u8 _acpi_ctype[];
 #define ACPI_IS_PRINT(c)  (_acpi_ctype[(unsigned char)(c)] & (_ACPI_LO | _ACPI_UP | _ACPI_DI | _ACPI_SP | _ACPI_PU))
 #define ACPI_IS_ALPHA(c)  (_acpi_ctype[(unsigned char)(c)] & (_ACPI_LO | _ACPI_UP))
 
-#endif				/* ACPI_USE_SYSTEM_CLIBRARY */
+#endif				/* !ACPI_USE_SYSTEM_CLIBRARY */
+
+#define ACPI_IS_ASCII(c)  ((c) < 0x80)
 
 /*
  * utcopy - Object construction and conversion interfaces
@@ -210,11 +228,11 @@ extern const u8 _acpi_ctype[];
 acpi_status
 acpi_ut_build_simple_object(union acpi_operand_object *obj,
 			    union acpi_object *user_obj,
-			    u8 * data_space, u32 * buffer_space_used);
+			    u8 *data_space, u32 *buffer_space_used);
 
 acpi_status
 acpi_ut_build_package_object(union acpi_operand_object *obj,
-			     u8 * buffer, u32 * space_used);
+			     u8 *buffer, u32 *space_used);
 
 acpi_status
 acpi_ut_copy_iobject_to_eobject(union acpi_operand_object *obj,
@@ -287,9 +305,10 @@ acpi_ut_ptr_exit(u32 line_number,
 		 const char *function_name,
 		 const char *module_name, u32 component_id, u8 *ptr);
 
-void acpi_ut_dump_buffer(u8 * buffer, u32 count, u32 display, u32 component_id);
+void
+acpi_ut_debug_dump_buffer(u8 *buffer, u32 count, u32 display, u32 component_id);
 
-void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display);
+void acpi_ut_dump_buffer(u8 *buffer, u32 count, u32 display, u32 offset);
 
 void acpi_ut_report_error(char *module_name, u32 line_number);
 
@@ -337,15 +356,19 @@ acpi_ut_execute_power_methods(struct acpi_namespace_node *device_node,
  */
 acpi_status
 acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
-		    struct acpica_device_id **return_id);
+		    struct acpi_pnp_device_id ** return_id);
 
 acpi_status
 acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
-		    struct acpica_device_id **return_id);
+		    struct acpi_pnp_device_id ** return_id);
+
+acpi_status
+acpi_ut_execute_SUB(struct acpi_namespace_node *device_node,
+		    struct acpi_pnp_device_id **return_id);
 
 acpi_status
 acpi_ut_execute_CID(struct acpi_namespace_node *device_node,
-		    struct acpica_device_id_list **return_cid_list);
+		    struct acpi_pnp_device_id_list ** return_cid_list);
 
 /*
  * utlock - reader/writer locks
@@ -479,15 +502,19 @@ acpi_ut_walk_package_tree(union acpi_operand_object *source_object,
 
 void acpi_ut_strupr(char *src_string);
 
+void acpi_ut_strlwr(char *src_string);
+
+int acpi_ut_stricmp(char *string1, char *string2);
+
 void acpi_ut_print_string(char *string, u8 max_length);
 
 u8 acpi_ut_valid_acpi_name(u32 name);
 
-acpi_name acpi_ut_repair_name(char *name);
+void acpi_ut_repair_name(char *name);
 
 u8 acpi_ut_valid_acpi_char(char character, u32 position);
 
-acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer);
+acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer);
 
 /* Values for Base above (16=Hex, 10=Decimal) */
 
@@ -508,12 +535,12 @@ acpi_ut_display_init_pathname(u8 type,
  * utresrc
  */
 acpi_status
-acpi_ut_walk_aml_resources(u8 * aml,
+acpi_ut_walk_aml_resources(u8 *aml,
 			   acpi_size aml_length,
 			   acpi_walk_aml_callback user_function,
 			   void **context);
 
-acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index);
+acpi_status acpi_ut_validate_resource(void *aml, u8 *return_index);
 
 u32 acpi_ut_get_descriptor_length(void *aml);
 
@@ -524,8 +551,7 @@ u8 acpi_ut_get_resource_header_length(void *aml);
 u8 acpi_ut_get_resource_type(void *aml);
 
 acpi_status
-acpi_ut_get_resource_end_tag(union acpi_operand_object *obj_desc,
+acpi_ut_get_resource_end_tag(union acpi_operand_object *obj_desc, u8 **end_tag);
-			     u8 ** end_tag);
 
 /*
  * utmutex - mutex support

drivers/acpi/acpica/amlresrc.h

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: amlresrc.h - AML resource descriptors

drivers/acpi/acpica/dsopcode.c

@@ -649,7 +649,8 @@ acpi_ds_eval_data_object_operands(struct acpi_walk_state *walk_state,
 		    ((op->common.parent->common.aml_opcode != AML_PACKAGE_OP) &&
 		     (op->common.parent->common.aml_opcode !=
 		      AML_VAR_PACKAGE_OP)
-		     && (op->common.parent->common.aml_opcode != AML_NAME_OP))) {
+		     && (op->common.parent->common.aml_opcode !=
+			 AML_NAME_OP))) {
 			walk_state->result_obj = obj_desc;
 		}
 	}

drivers/acpi/acpica/dsutils.c

@@ -560,7 +560,8 @@ acpi_ds_create_operand(struct acpi_walk_state *walk_state,
 					 * indicate this to the interpreter, set the
 					 * object to the root
 					 */
-					obj_desc = ACPI_CAST_PTR(union
+					obj_desc =
+					    ACPI_CAST_PTR(union
 								 acpi_operand_object,
 								 acpi_gbl_root_node);
 					status = AE_OK;

drivers/acpi/acpica/dswexec.c

@@ -57,7 +57,7 @@ ACPI_MODULE_NAME("dswexec")
 /*
  * Dispatch table for opcode classes
  */
-static ACPI_EXECUTE_OP acpi_gbl_op_type_dispatch[] = {
+static acpi_execute_op acpi_gbl_op_type_dispatch[] = {
 	acpi_ex_opcode_0A_0T_1R,
 	acpi_ex_opcode_1A_0T_0R,
 	acpi_ex_opcode_1A_0T_1R,

drivers/acpi/acpica/dswload2.c

@@ -254,7 +254,7 @@ acpi_ds_load2_begin_op(struct acpi_walk_state *walk_state,
 				    acpi_ut_get_type_name(node->type),
 				    acpi_ut_get_node_name(node)));
 
-			return (AE_AML_OPERAND_TYPE);
+			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
 		}
 		break;
 
@@ -602,7 +602,7 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state)
 							  region_space,
 							  walk_state);
 				if (ACPI_FAILURE(status)) {
-					return (status);
+					return_ACPI_STATUS(status);
 				}
 
 				acpi_ex_exit_interpreter();

drivers/acpi/acpica/dswstate.c

@@ -51,8 +51,9 @@
 ACPI_MODULE_NAME("dswstate")
 
   /* Local prototypes */
-static acpi_status acpi_ds_result_stack_push(struct acpi_walk_state *ws);
+static acpi_status
-static acpi_status acpi_ds_result_stack_pop(struct acpi_walk_state *ws);
+acpi_ds_result_stack_push(struct acpi_walk_state *walk_state);
+static acpi_status acpi_ds_result_stack_pop(struct acpi_walk_state *walk_state);
 
 /*******************************************************************************
  *
@@ -536,9 +537,12 @@ struct acpi_walk_state *acpi_ds_pop_walk_state(struct acpi_thread_state *thread)
  *
  ******************************************************************************/
 
-struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id, union acpi_parse_object
+struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id,
-						  *origin, union acpi_operand_object
+						  union acpi_parse_object
-						  *method_desc, struct acpi_thread_state
+						  *origin,
+						  union acpi_operand_object
+						  *method_desc,
+						  struct acpi_thread_state
 						  *thread)
 {
 	struct acpi_walk_state *walk_state;
@@ -704,13 +708,13 @@ void acpi_ds_delete_walk_state(struct acpi_walk_state *walk_state)
 	ACPI_FUNCTION_TRACE_PTR(ds_delete_walk_state, walk_state);
 
 	if (!walk_state) {
-		return;
+		return_VOID;
 	}
 
 	if (walk_state->descriptor_type != ACPI_DESC_TYPE_WALK) {
 		ACPI_ERROR((AE_INFO, "%p is not a valid walk state",
 			    walk_state));
-		return;
+		return_VOID;
 	}
 
 	/* There should not be any open scopes */

drivers/acpi/acpica/evgpe.c

@@ -89,7 +89,8 @@ acpi_ev_update_gpe_enable_mask(struct acpi_gpe_event_info *gpe_event_info)
 	/* Set the mask bit only if there are references to this GPE */
 
 	if (gpe_event_info->runtime_count) {
-		ACPI_SET_BIT(gpe_register_info->enable_for_run, (u8)register_bit);
+		ACPI_SET_BIT(gpe_register_info->enable_for_run,
+			     (u8)register_bit);
 	}
 
 	return_ACPI_STATUS(AE_OK);
@@ -106,8 +107,7 @@ acpi_ev_update_gpe_enable_mask(struct acpi_gpe_event_info *gpe_event_info)
  * DESCRIPTION: Clear a GPE of stale events and enable it.
  *
  ******************************************************************************/
-acpi_status
+acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
-acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
 {
 	acpi_status status;
 
@@ -131,8 +131,8 @@ acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
 	}
 
 	/* Enable the requested GPE */
-	status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
 
+	status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
 	return_ACPI_STATUS(status);
 }
 
@@ -150,7 +150,8 @@ acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
  *
  ******************************************************************************/
 
-acpi_status acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
+acpi_status
+acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
 {
 	acpi_status status = AE_OK;
 
@@ -191,7 +192,8 @@ acpi_status acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info
  *
  ******************************************************************************/
 
-acpi_status acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
+acpi_status
+acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
 {
 	acpi_status status = AE_OK;
 
@@ -208,7 +210,8 @@ acpi_status acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_i
 
 		status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
 		if (ACPI_SUCCESS(status)) {
-			status = acpi_hw_low_set_gpe(gpe_event_info,
+			status =
+			    acpi_hw_low_set_gpe(gpe_event_info,
 						     ACPI_GPE_DISABLE);
 		}
 
@@ -306,7 +309,8 @@ struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
 
 	/* A Non-NULL gpe_device means this is a GPE Block Device */
 
-	obj_desc = acpi_ns_get_attached_object((struct acpi_namespace_node *)
+	obj_desc =
+	    acpi_ns_get_attached_object((struct acpi_namespace_node *)
 					       gpe_device);
 	if (!obj_desc || !obj_desc->device.gpe_block) {
 		return (NULL);

drivers/acpi/acpica/evgpeblk.c

@@ -486,7 +486,8 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 			if (ACPI_FAILURE(status)) {
 				ACPI_EXCEPTION((AE_INFO, status,
 					"Could not enable GPE 0x%02X",
-					gpe_index + gpe_block->block_base_number));
+					gpe_index +
+					gpe_block->block_base_number));
 				continue;
 			}
 

drivers/acpi/acpica/evgpeutil.c

@@ -374,7 +374,8 @@ acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 				gpe_event_info->dispatch.handler = NULL;
 				gpe_event_info->flags &=
 				    ~ACPI_GPE_DISPATCH_MASK;
-			} else if ((gpe_event_info->
+			} else
+			    if ((gpe_event_info->
 				 flags & ACPI_GPE_DISPATCH_MASK) ==
 				ACPI_GPE_DISPATCH_NOTIFY) {
 

drivers/acpi/acpica/evrgnini.c

@@ -227,8 +227,7 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
 
 				/* Install a handler for this PCI root bridge */
 
-				status =
+				status = acpi_install_address_space_handler((acpi_handle) pci_root_node, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_DEFAULT_HANDLER, NULL, NULL);
-				    acpi_install_address_space_handler((acpi_handle) pci_root_node, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_DEFAULT_HANDLER, NULL, NULL);
 				if (ACPI_FAILURE(status)) {
 					if (status == AE_SAME_HANDLER) {
 						/*
@@ -350,8 +349,8 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
 static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node)
 {
 	acpi_status status;
-	struct acpica_device_id *hid;
+	struct acpi_pnp_device_id *hid;
-	struct acpica_device_id_list *cid;
+	struct acpi_pnp_device_id_list *cid;
 	u32 i;
 	u8 match;
 

drivers/acpi/acpica/evxface.c

@@ -398,7 +398,7 @@ ACPI_EXPORT_SYMBOL(acpi_install_exception_handler)
  *
  ******************************************************************************/
 acpi_status
-acpi_install_global_event_handler(ACPI_GBL_EVENT_HANDLER handler, void *context)
+acpi_install_global_event_handler(acpi_gbl_event_handler handler, void *context)
 {
 	acpi_status status;
 

drivers/acpi/acpica/evxfgpe.c

@@ -221,7 +221,8 @@ acpi_setup_gpe_for_wake(acpi_handle wake_device,
 	if (wake_device == ACPI_ROOT_OBJECT) {
 		device_node = acpi_gbl_root_node;
 	} else {
-		device_node = ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
+		device_node =
+		    ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
 	}
 
 	/* Validate WakeDevice is of type Device */
@@ -324,7 +325,8 @@ ACPI_EXPORT_SYMBOL(acpi_setup_gpe_for_wake)
  *
  ******************************************************************************/
 
-acpi_status acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action)
+acpi_status
+acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action)
 {
 	acpi_status status = AE_OK;
 	struct acpi_gpe_event_info *gpe_event_info;
@@ -567,7 +569,7 @@ acpi_install_gpe_block(acpi_handle gpe_device,
 
 	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
 	if (ACPI_FAILURE(status)) {
-		return (status);
+		return_ACPI_STATUS(status);
 	}
 
 	node = acpi_ns_validate_handle(gpe_device);
@@ -650,7 +652,7 @@ acpi_status acpi_remove_gpe_block(acpi_handle gpe_device)
 
 	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
 	if (ACPI_FAILURE(status)) {
-		return (status);
+		return_ACPI_STATUS(status);
 	}
 
 	node = acpi_ns_validate_handle(gpe_device);
@@ -694,8 +696,7 @@ ACPI_EXPORT_SYMBOL(acpi_remove_gpe_block)
  *              the FADT-defined gpe blocks. Otherwise, the GPE block device.
  *
  ******************************************************************************/
-acpi_status
+acpi_status acpi_get_gpe_device(u32 index, acpi_handle * gpe_device)
-acpi_get_gpe_device(u32 index, acpi_handle *gpe_device)
 {
 	struct acpi_gpe_device_info info;
 	acpi_status status;

drivers/acpi/acpica/exconvrt.c

@@ -516,8 +516,8 @@ acpi_ex_convert_to_string(union acpi_operand_object * obj_desc,
 			string_length--;
 		}
 
-		return_desc = acpi_ut_create_string_object((acpi_size)
+		return_desc =
-							   string_length);
+		    acpi_ut_create_string_object((acpi_size) string_length);
 		if (!return_desc) {
 			return_ACPI_STATUS(AE_NO_MEMORY);
 		}

drivers/acpi/acpica/excreate.c

@@ -243,8 +243,7 @@ acpi_status acpi_ex_create_mutex(struct acpi_walk_state *walk_state)
 
 	/* Init object and attach to NS node */
 
-	obj_desc->mutex.sync_level =
+	obj_desc->mutex.sync_level = (u8)walk_state->operands[1]->integer.value;
-	    (u8) walk_state->operands[1]->integer.value;
 	obj_desc->mutex.node =
 	    (struct acpi_namespace_node *)walk_state->operands[0];
 

drivers/acpi/acpica/exdebug.c

@@ -145,10 +145,10 @@ acpi_ex_do_debug_object(union acpi_operand_object *source_desc,
 	case ACPI_TYPE_BUFFER:
 
 		acpi_os_printf("[0x%.2X]\n", (u32)source_desc->buffer.length);
-		acpi_ut_dump_buffer2(source_desc->buffer.pointer,
+		acpi_ut_dump_buffer(source_desc->buffer.pointer,
 				    (source_desc->buffer.length < 256) ?
 				    source_desc->buffer.length : 256,
-				     DB_BYTE_DISPLAY);
+				    DB_BYTE_DISPLAY, 0);
 		break;
 
 	case ACPI_TYPE_STRING:
@@ -190,7 +190,7 @@ acpi_ex_do_debug_object(union acpi_operand_object *source_desc,
 
 			acpi_os_printf("Table Index 0x%X\n",
 				       source_desc->reference.value);
-			return;
+			return_VOID;
 
 		default:
 			break;

drivers/acpi/acpica/exdump.c

@@ -464,7 +464,8 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth)
 
 	ACPI_FUNCTION_NAME(ex_dump_operand)
 
-	    if (!((ACPI_LV_EXEC & acpi_dbg_level)
+	    if (!
+		((ACPI_LV_EXEC & acpi_dbg_level)
 		  && (_COMPONENT & acpi_dbg_layer))) {
 		return;
 	}
@@ -810,7 +811,8 @@ void acpi_ex_dump_namespace_node(struct acpi_namespace_node *node, u32 flags)
 	ACPI_FUNCTION_ENTRY();
 
 	if (!flags) {
-		if (!((ACPI_LV_OBJECTS & acpi_dbg_level)
+		if (!
+		    ((ACPI_LV_OBJECTS & acpi_dbg_level)
 		      && (_COMPONENT & acpi_dbg_layer))) {
 			return;
 		}
@@ -940,8 +942,9 @@ acpi_ex_dump_package_obj(union acpi_operand_object *obj_desc,
 		acpi_os_printf("[Buffer] Length %.2X = ",
 			       obj_desc->buffer.length);
 		if (obj_desc->buffer.length) {
-			acpi_ut_dump_buffer(ACPI_CAST_PTR
+			acpi_ut_debug_dump_buffer(ACPI_CAST_PTR
-					    (u8, obj_desc->buffer.pointer),
+						  (u8,
+						   obj_desc->buffer.pointer),
 						  obj_desc->buffer.length,
 						  DB_DWORD_DISPLAY, _COMPONENT);
 		} else {
@@ -996,7 +999,8 @@ acpi_ex_dump_object_descriptor(union acpi_operand_object *obj_desc, u32 flags)
 	}
 
 	if (!flags) {
-		if (!((ACPI_LV_OBJECTS & acpi_dbg_level)
+		if (!
+		    ((ACPI_LV_OBJECTS & acpi_dbg_level)
 		      && (_COMPONENT & acpi_dbg_layer))) {
 			return_VOID;
 		}

drivers/acpi/acpica/exfldio.c

@@ -54,8 +54,7 @@ ACPI_MODULE_NAME("exfldio")
 /* Local prototypes */
 static acpi_status
 acpi_ex_field_datum_io(union acpi_operand_object *obj_desc,
-		       u32 field_datum_byte_offset,
+		       u32 field_datum_byte_offset, u64 *value, u32 read_write);
-		       u64 *value, u32 read_write);
 
 static u8
 acpi_ex_register_overflow(union acpi_operand_object *obj_desc, u64 value);

drivers/acpi/acpica/exmisc.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exmisc - ACPI AML (p-code) execution - specific opcodes

drivers/acpi/acpica/exmutex.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exmutex - ASL Mutex Acquire/Release functions
@@ -305,7 +304,7 @@ acpi_status acpi_ex_release_mutex_object(union acpi_operand_object *obj_desc)
 	ACPI_FUNCTION_TRACE(ex_release_mutex_object);
 
 	if (obj_desc->mutex.acquisition_depth == 0) {
-		return (AE_NOT_ACQUIRED);
+		return_ACPI_STATUS(AE_NOT_ACQUIRED);
 	}
 
 	/* Match multiple Acquires with multiple Releases */
@@ -462,7 +461,7 @@ void acpi_ex_release_all_mutexes(struct acpi_thread_state *thread)
 	union acpi_operand_object *next = thread->acquired_mutex_list;
 	union acpi_operand_object *obj_desc;
 
-	ACPI_FUNCTION_ENTRY();
+	ACPI_FUNCTION_NAME(ex_release_all_mutexes);
 
 	/* Traverse the list of owned mutexes, releasing each one */
 
@@ -474,6 +473,10 @@ void acpi_ex_release_all_mutexes(struct acpi_thread_state *thread)
 		obj_desc->mutex.next = NULL;
 		obj_desc->mutex.acquisition_depth = 0;
 
+		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+				  "Force-releasing held mutex: %p\n",
+				  obj_desc));
+
 		/* Release the mutex, special case for Global Lock */
 
 		if (obj_desc == acpi_gbl_global_lock_mutex) {

drivers/acpi/acpica/exnames.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exnames - interpreter/scanner name load/execute
@@ -53,8 +52,7 @@ ACPI_MODULE_NAME("exnames")
 /* Local prototypes */
 static char *acpi_ex_allocate_name_string(u32 prefix_count, u32 num_name_segs);
 
-static acpi_status
+static acpi_status acpi_ex_name_segment(u8 **in_aml_address, char *name_string);
-acpi_ex_name_segment(u8 ** in_aml_address, char *name_string);
 
 /*******************************************************************************
  *
@@ -178,7 +176,8 @@ static acpi_status acpi_ex_name_segment(u8 ** in_aml_address, char *name_string)
 
 	ACPI_DEBUG_PRINT((ACPI_DB_LOAD, "Bytes from stream:\n"));
 
-	for (index = 0; (index < ACPI_NAME_SIZE)
+	for (index = 0;
+	     (index < ACPI_NAME_SIZE)
 	     && (acpi_ut_valid_acpi_char(*aml_address, 0)); index++) {
 		char_buf[index] = *aml_address++;
 		ACPI_DEBUG_PRINT((ACPI_DB_LOAD, "%c\n", char_buf[index]));

drivers/acpi/acpica/exoparg1.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exoparg1 - AML execution - opcodes with 1 argument

drivers/acpi/acpica/exoparg3.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exoparg3 - AML execution - opcodes with 3 arguments

drivers/acpi/acpica/exoparg6.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exoparg6 - AML execution - opcodes with 6 arguments
@@ -198,7 +197,7 @@ acpi_ex_do_match(u32 match_op,
 		return (FALSE);
 	}
 
-	return logical_result;
+	return (logical_result);
 }
 
 /*******************************************************************************

drivers/acpi/acpica/exprep.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exprep - ACPI AML (p-code) execution - field prep utilities

drivers/acpi/acpica/exregion.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exregion - ACPI default op_region (address space) handlers

drivers/acpi/acpica/exresnte.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exresnte - AML Interpreter object resolution

drivers/acpi/acpica/exresolv.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exresolv - AML Interpreter object resolution

drivers/acpi/acpica/exresop.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exresop - AML Interpreter operand/object resolution
@@ -337,7 +336,8 @@ acpi_ex_resolve_operands(u16 opcode,
 			if ((opcode == AML_STORE_OP) &&
 			    ((*stack_ptr)->common.type ==
 			     ACPI_TYPE_LOCAL_REFERENCE)
-			    && ((*stack_ptr)->reference.class == ACPI_REFCLASS_INDEX)) {
+			    && ((*stack_ptr)->reference.class ==
+				ACPI_REFCLASS_INDEX)) {
 				goto next_operand;
 			}
 			break;

drivers/acpi/acpica/exstoren.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exstoren - AML Interpreter object store support,

drivers/acpi/acpica/exstorob.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exstorob - AML Interpreter object store support, store to object

drivers/acpi/acpica/exsystem.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exsystem - Interface to OS services

drivers/acpi/acpica/exutils.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: exutils - interpreter/scanner utilities

drivers/acpi/acpica/hwacpi.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: hwacpi - ACPI Hardware Initialization/Mode Interface

drivers/acpi/acpica/hwgpe.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: hwgpe - Low level GPE enable/disable/clear functions
@@ -339,7 +338,8 @@ acpi_hw_clear_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 
 acpi_status
 acpi_hw_enable_runtime_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
-				 struct acpi_gpe_block_info *gpe_block, void *context)
+				 struct acpi_gpe_block_info * gpe_block,
+				 void *context)
 {
 	u32 i;
 	acpi_status status;

drivers/acpi/acpica/hwpci.c

@@ -259,7 +259,7 @@ acpi_hw_process_pci_list(struct acpi_pci_id *pci_id,
 		status = acpi_hw_get_pci_device_info(pci_id, info->device,
 						     &bus_number, &is_bridge);
 		if (ACPI_FAILURE(status)) {
-			return_ACPI_STATUS(status);
+			return (status);
 		}
 
 		info = info->next;
@@ -271,7 +271,7 @@ acpi_hw_process_pci_list(struct acpi_pci_id *pci_id,
 			  pci_id->segment, pci_id->bus, pci_id->device,
 			  pci_id->function, status, bus_number, is_bridge));
 
-	return_ACPI_STATUS(AE_OK);
+	return (AE_OK);
 }
 
 /*******************************************************************************

drivers/acpi/acpica/hwregs.c

@@ -1,4 +1,3 @@
-
 /*******************************************************************************
  *
  * Module Name: hwregs - Read/write access functions for the various ACPI

drivers/acpi/acpica/hwtimer.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Name: hwtimer.c - ACPI Power Management Timer Interface
@@ -101,8 +100,7 @@ acpi_status acpi_get_timer(u32 * ticks)
 		return_ACPI_STATUS(AE_BAD_PARAMETER);
 	}
 
-	status =
+	status = acpi_hw_read(ticks, &acpi_gbl_FADT.xpm_timer_block);
-	    acpi_hw_read(ticks, &acpi_gbl_FADT.xpm_timer_block);
 
 	return_ACPI_STATUS(status);
 }

drivers/acpi/acpica/hwvalid.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: hwvalid - I/O request validation

drivers/acpi/acpica/hwxface.c

@@ -1,4 +1,3 @@
-
 /******************************************************************************
  *
  * Module Name: hwxface - Public ACPICA hardware interfaces

drivers/acpi/acpica/hwxfsleep.c

@@ -49,8 +49,7 @@
 ACPI_MODULE_NAME("hwxfsleep")
 
 /* Local prototypes */
-static acpi_status
+static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id);
-acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id);
 
 /*
  * Dispatch table used to efficiently branch to the various sleep
@@ -234,8 +233,7 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_s4bios)
  *              function.
  *
  ******************************************************************************/
-static acpi_status
+static acpi_status acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id)
-acpi_hw_sleep_dispatch(u8 sleep_state, u32 function_id)
 {
 	acpi_status status;
 	struct acpi_sleep_functions *sleep_functions =
@@ -369,8 +367,7 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state)
 		return_ACPI_STATUS(AE_AML_OPERAND_VALUE);
 	}
 
-	status =
+	status = acpi_hw_sleep_dispatch(sleep_state, ACPI_SLEEP_FUNCTION_ID);
-	    acpi_hw_sleep_dispatch(sleep_state, ACPI_SLEEP_FUNCTION_ID);
 	return_ACPI_STATUS(status);
 }
 
@@ -396,8 +393,7 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state)
 	ACPI_FUNCTION_TRACE(acpi_leave_sleep_state_prep);
 
 	status =
-	    acpi_hw_sleep_dispatch(sleep_state,
+	    acpi_hw_sleep_dispatch(sleep_state, ACPI_WAKE_PREP_FUNCTION_ID);
-				   ACPI_WAKE_PREP_FUNCTION_ID);
 	return_ACPI_STATUS(status);
 }
 

drivers/acpi/acpica/nsaccess.c

@@ -110,11 +110,11 @@ acpi_status acpi_ns_root_initialize(void)
 		status = acpi_ns_lookup(NULL, init_val->name, init_val->type,
 					ACPI_IMODE_LOAD_PASS2,
 					ACPI_NS_NO_UPSEARCH, NULL, &new_node);
-
+		if (ACPI_FAILURE(status)) {
-		if (ACPI_FAILURE(status) || (!new_node)) {	/* Must be on same line for code converter */
 			ACPI_EXCEPTION((AE_INFO, status,
 					"Could not create predefined name %s",
 					init_val->name));
+			continue;
 		}
 
 		/*
@@ -179,8 +179,7 @@ acpi_status acpi_ns_root_initialize(void)
 
 				/* Build an object around the static string */
 
-				obj_desc->string.length =
+				obj_desc->string.length = (u32)ACPI_STRLEN(val);
-				    (u32) ACPI_STRLEN(val);
 				obj_desc->string.pointer = val;
 				obj_desc->common.flags |= AOPOBJ_STATIC_POINTER;
 				break;

drivers/acpi/acpica/nsdump.c

@@ -209,14 +209,6 @@ acpi_ns_dump_one_object(acpi_handle obj_handle,
 				      "Invalid ACPI Object Type 0x%08X", type));
 		}
 
-		if (!acpi_ut_valid_acpi_name(this_node->name.integer)) {
-			this_node->name.integer =
-			    acpi_ut_repair_name(this_node->name.ascii);
-
-			ACPI_WARNING((AE_INFO, "Invalid ACPI Name %08X",
-				      this_node->name.integer));
-		}
-
 		acpi_os_printf("%4.4s", acpi_ut_get_node_name(this_node));
 	}
 

drivers/acpi/acpica/nsinit.c

@@ -96,8 +96,8 @@ acpi_status acpi_ns_initialize_objects(void)
 	/* Walk entire namespace from the supplied root */
 
 	status = acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT,
-				     ACPI_UINT32_MAX, acpi_ns_init_one_object, NULL,
+				     ACPI_UINT32_MAX, acpi_ns_init_one_object,
-				     &info, NULL);
+				     NULL, &info, NULL);
 	if (ACPI_FAILURE(status)) {
 		ACPI_EXCEPTION((AE_INFO, status, "During WalkNamespace"));
 	}

drivers/acpi/acpica/nsnames.c

@@ -195,7 +195,7 @@ acpi_size acpi_ns_get_pathname_length(struct acpi_namespace_node *node)
 			ACPI_ERROR((AE_INFO,
 				    "Invalid Namespace Node (%p) while traversing namespace",
 				    next_node));
-			return 0;
+			return (0);
 		}
 		size += ACPI_PATH_SEGMENT_LENGTH;
 		next_node = next_node->parent;

drivers/acpi/acpica/nssearch.c

@@ -314,23 +314,8 @@ acpi_ns_search_and_enter(u32 target_name,
 	 * this problem, and we want to be able to enable ACPI support for them,
 	 * even though there are a few bad names.
 	 */
-	if (!acpi_ut_valid_acpi_name(target_name)) {
-		target_name =
 	acpi_ut_repair_name(ACPI_CAST_PTR(char, &target_name));
 
-		/* Report warning only if in strict mode or debug mode */
-
-		if (!acpi_gbl_enable_interpreter_slack) {
-			ACPI_WARNING((AE_INFO,
-				      "Found bad character(s) in name, repaired: [%4.4s]\n",
-				      ACPI_CAST_PTR(char, &target_name)));
-		} else {
-			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-					  "Found bad character(s) in name, repaired: [%4.4s]\n",
-					  ACPI_CAST_PTR(char, &target_name)));
-		}
-	}
-
 	/* Try to find the name in the namespace level specified by the caller */
 
 	*return_node = ACPI_ENTRY_NOT_FOUND;

drivers/acpi/acpica/nsutils.c

@@ -557,10 +557,14 @@ acpi_ns_externalize_name(u32 internal_name_length,
 				(*converted_name)[j++] = '.';
 			}
 
-			(*converted_name)[j++] = internal_name[names_index++];
+			/* Copy and validate the 4-char name segment */
-			(*converted_name)[j++] = internal_name[names_index++];
+
-			(*converted_name)[j++] = internal_name[names_index++];
+			ACPI_MOVE_NAME(&(*converted_name)[j],
-			(*converted_name)[j++] = internal_name[names_index++];
+				       &internal_name[names_index]);
+			acpi_ut_repair_name(&(*converted_name)[j]);
+
+			j += ACPI_NAME_SIZE;
+			names_index += ACPI_NAME_SIZE;
 		}
 	}
 

drivers/acpi/acpica/nsxfeval.c

@@ -542,15 +542,15 @@ acpi_ns_get_device_callback(acpi_handle obj_handle,
 	acpi_status status;
 	struct acpi_namespace_node *node;
 	u32 flags;
-	struct acpica_device_id *hid;
+	struct acpi_pnp_device_id *hid;
-	struct acpica_device_id_list *cid;
+	struct acpi_pnp_device_id_list *cid;
 	u32 i;
 	u8 found;
 	int no_match;
 
 	status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
 	if (ACPI_FAILURE(status)) {
-		return (status);
+		return_ACPI_STATUS(status);
 	}
 
 	node = acpi_ns_validate_handle(obj_handle);

drivers/acpi/acpica/nsxfname.c

@@ -53,8 +53,8 @@
 ACPI_MODULE_NAME("nsxfname")
 
 /* Local prototypes */
-static char *acpi_ns_copy_device_id(struct acpica_device_id *dest,
+static char *acpi_ns_copy_device_id(struct acpi_pnp_device_id *dest,
-				    struct acpica_device_id *source,
+				    struct acpi_pnp_device_id *source,
 				    char *string_area);
 
 /******************************************************************************
@@ -202,8 +202,7 @@ acpi_get_name(acpi_handle handle, u32 name_type, struct acpi_buffer * buffer)
 
 	/* Just copy the ACPI name from the Node and zero terminate it */
 
-	ACPI_STRNCPY(buffer->pointer, acpi_ut_get_node_name(node),
+	ACPI_MOVE_NAME(buffer->pointer, acpi_ut_get_node_name(node));
-		     ACPI_NAME_SIZE);
 	((char *)buffer->pointer)[ACPI_NAME_SIZE] = 0;
 	status = AE_OK;
 
@@ -219,20 +218,21 @@ ACPI_EXPORT_SYMBOL(acpi_get_name)
  *
  * FUNCTION:    acpi_ns_copy_device_id
  *
- * PARAMETERS:  dest                - Pointer to the destination DEVICE_ID
+ * PARAMETERS:  dest                - Pointer to the destination PNP_DEVICE_ID
- *              source              - Pointer to the source DEVICE_ID
+ *              source              - Pointer to the source PNP_DEVICE_ID
  *              string_area         - Pointer to where to copy the dest string
  *
  * RETURN:      Pointer to the next string area
  *
- * DESCRIPTION: Copy a single DEVICE_ID, including the string data.
+ * DESCRIPTION: Copy a single PNP_DEVICE_ID, including the string data.
  *
  ******************************************************************************/
-static char *acpi_ns_copy_device_id(struct acpica_device_id *dest,
+static char *acpi_ns_copy_device_id(struct acpi_pnp_device_id *dest,
-				    struct acpica_device_id *source,
+				    struct acpi_pnp_device_id *source,
 				    char *string_area)
 {
-	/* Create the destination DEVICE_ID */
+
+	/* Create the destination PNP_DEVICE_ID */
 
 	dest->string = string_area;
 	dest->length = source->length;
@@ -256,8 +256,8 @@ static char *acpi_ns_copy_device_id(struct acpica_device_id *dest,
  *              namespace node and possibly by running several standard
  *              control methods (Such as in the case of a device.)
  *
- * For Device and Processor objects, run the Device _HID, _UID, _CID, _STA,
+ * For Device and Processor objects, run the Device _HID, _UID, _CID, _SUB,
- * _ADR, _sx_w, and _sx_d methods.
+ * _STA, _ADR, _sx_w, and _sx_d methods.
  *
  * Note: Allocates the return buffer, must be freed by the caller.
  *
@@ -269,9 +269,10 @@ acpi_get_object_info(acpi_handle handle,
 {
 	struct acpi_namespace_node *node;
 	struct acpi_device_info *info;
-	struct acpica_device_id_list *cid_list = NULL;
+	struct acpi_pnp_device_id_list *cid_list = NULL;
-	struct acpica_device_id *hid = NULL;
+	struct acpi_pnp_device_id *hid = NULL;
-	struct acpica_device_id *uid = NULL;
+	struct acpi_pnp_device_id *uid = NULL;
+	struct acpi_pnp_device_id *sub = NULL;
 	char *next_id_string;
 	acpi_object_type type;
 	acpi_name name;
@@ -316,7 +317,7 @@ acpi_get_object_info(acpi_handle handle,
 	if ((type == ACPI_TYPE_DEVICE) || (type == ACPI_TYPE_PROCESSOR)) {
 		/*
 		 * Get extra info for ACPI Device/Processor objects only:
-		 * Run the Device _HID, _UID, and _CID methods.
+		 * Run the Device _HID, _UID, _SUB, and _CID methods.
 		 *
 		 * Note: none of these methods are required, so they may or may
 		 * not be present for this device. The Info->Valid bitfield is used
@@ -339,6 +340,14 @@ acpi_get_object_info(acpi_handle handle,
 			valid |= ACPI_VALID_UID;
 		}
 
+		/* Execute the Device._SUB method */
+
+		status = acpi_ut_execute_SUB(node, &sub);
+		if (ACPI_SUCCESS(status)) {
+			info_size += sub->length;
+			valid |= ACPI_VALID_SUB;
+		}
+
 		/* Execute the Device._CID method */
 
 		status = acpi_ut_execute_CID(node, &cid_list);
@@ -348,7 +357,7 @@ acpi_get_object_info(acpi_handle handle,
 
 			info_size +=
 			    (cid_list->list_size -
-			     sizeof(struct acpica_device_id_list));
+			     sizeof(struct acpi_pnp_device_id_list));
 			valid |= ACPI_VALID_CID;
 		}
 	}
@@ -418,16 +427,17 @@ acpi_get_object_info(acpi_handle handle,
 	next_id_string = ACPI_CAST_PTR(char, info->compatible_id_list.ids);
 	if (cid_list) {
 
-		/* Point past the CID DEVICE_ID array */
+		/* Point past the CID PNP_DEVICE_ID array */
 
 		next_id_string +=
 		    ((acpi_size) cid_list->count *
-		     sizeof(struct acpica_device_id));
+		     sizeof(struct acpi_pnp_device_id));
 	}
 
 	/*
-	 * Copy the HID, UID, and CIDs to the return buffer. The variable-length
+	 * Copy the HID, UID, SUB, and CIDs to the return buffer.
-	 * strings are copied to the reserved area at the end of the buffer.
+	 * The variable-length strings are copied to the reserved area
+	 * at the end of the buffer.
 	 *
 	 * For HID and CID, check if the ID is a PCI Root Bridge.
 	 */
@@ -445,6 +455,11 @@ acpi_get_object_info(acpi_handle handle,
 							uid, next_id_string);
 	}
 
+	if (sub) {
+		next_id_string = acpi_ns_copy_device_id(&info->subsystem_id,
+							sub, next_id_string);
+	}
+
 	if (cid_list) {
 		info->compatible_id_list.count = cid_list->count;
 		info->compatible_id_list.list_size = cid_list->list_size;
@@ -481,6 +496,9 @@ acpi_get_object_info(acpi_handle handle,
 	if (uid) {
 		ACPI_FREE(uid);
 	}
+	if (sub) {
+		ACPI_FREE(sub);
+	}
 	if (cid_list) {
 		ACPI_FREE(cid_list);
 	}

drivers/acpi/acpica/psloop.c

@@ -133,18 +133,46 @@ static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state)
 
 	case AML_CLASS_UNKNOWN:
 
-		/* The opcode is unrecognized. Just skip unknown opcodes */
+		/* The opcode is unrecognized. Complain and skip unknown opcodes */
 
+		if (walk_state->pass_number == 2) {
 			ACPI_ERROR((AE_INFO,
-			    "Found unknown opcode 0x%X at AML address %p offset 0x%X, ignoring",
+				    "Unknown opcode 0x%.2X at table offset 0x%.4X, ignoring",
-			    walk_state->opcode, walk_state->parser_state.aml,
+				    walk_state->opcode,
-			    walk_state->aml_offset));
+				    (u32)(walk_state->aml_offset +
+					  sizeof(struct acpi_table_header))));
 
-		ACPI_DUMP_BUFFER(walk_state->parser_state.aml, 128);
+			ACPI_DUMP_BUFFER(walk_state->parser_state.aml - 16, 48);
 
-		/* Assume one-byte bad opcode */
+#ifdef ACPI_ASL_COMPILER
+			/*
+			 * This is executed for the disassembler only. Output goes
+			 * to the disassembled ASL output file.
+			 */
+			acpi_os_printf
+			    ("/*\nError: Unknown opcode 0x%.2X at table offset 0x%.4X, context:\n",
+			     walk_state->opcode,
+			     (u32)(walk_state->aml_offset +
+				   sizeof(struct acpi_table_header)));
+
+			/* Dump the context surrounding the invalid opcode */
+
+			acpi_ut_dump_buffer(((u8 *)walk_state->parser_state.
+					     aml - 16), 48, DB_BYTE_DISPLAY,
+					    walk_state->aml_offset +
+					    sizeof(struct acpi_table_header) -
+					    16);
+			acpi_os_printf(" */\n");
+#endif
+		}
+
+		/* Increment past one-byte or two-byte opcode */
 
 		walk_state->parser_state.aml++;
+		if (walk_state->opcode > 0xFF) {	/* Can only happen if first byte is 0x5B */
+			walk_state->parser_state.aml++;
+		}
+
 		return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
 
 	default:
@@ -519,11 +547,18 @@ acpi_ps_get_arguments(struct acpi_walk_state *walk_state,
 					if ((op_info->class ==
 					     AML_CLASS_EXECUTE) && (!arg)) {
 						ACPI_WARNING((AE_INFO,
-							      "Detected an unsupported executable opcode "
+							      "Unsupported module-level executable opcode "
-							      "at module-level: [0x%.4X] at table offset 0x%.4X",
+							      "0x%.2X at table offset 0x%.4X",
-							      op->common.aml_opcode,
+							      op->common.
-							      (u32)((aml_op_start - walk_state->parser_state.aml_start)
+							      aml_opcode,
-								+ sizeof(struct acpi_table_header))));
+							      (u32)
+							      (ACPI_PTR_DIFF
+							       (aml_op_start,
+								walk_state->
+								parser_state.
+								aml_start) +
+							       sizeof(struct
+								      acpi_table_header))));
 					}
 				}
 				break;
@@ -843,8 +878,6 @@ acpi_ps_complete_op(struct acpi_walk_state *walk_state,
 		*op = NULL;
 	}
 
-	ACPI_PREEMPTION_POINT();
-
 	return_ACPI_STATUS(AE_OK);
 }
 

drivers/acpi/acpica/psopcode.c

@@ -392,10 +392,12 @@ const struct acpi_opcode_info acpi_gbl_aml_op_info[AML_NUM_OPCODES] = {
 		 AML_FLAGS_EXEC_1A_0T_1R | AML_NO_OPERAND_RESOLVE),
 /* 38 */ ACPI_OP("LAnd", ARGP_LAND_OP, ARGI_LAND_OP, ACPI_TYPE_ANY,
 		 AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
-		 AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC | AML_CONSTANT),
+			 AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC |
+			 AML_CONSTANT),
 /* 39 */ ACPI_OP("LOr", ARGP_LOR_OP, ARGI_LOR_OP, ACPI_TYPE_ANY,
 		 AML_CLASS_EXECUTE, AML_TYPE_EXEC_2A_0T_1R,
-		 AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC | AML_CONSTANT),
+		 	 AML_FLAGS_EXEC_2A_0T_1R | AML_LOGICAL_NUMERIC |
+			 AML_CONSTANT),
 /* 3A */ ACPI_OP("LNot", ARGP_LNOT_OP, ARGI_LNOT_OP, ACPI_TYPE_ANY,
 		 AML_CLASS_EXECUTE, AML_TYPE_EXEC_1A_0T_1R,
 		 AML_FLAGS_EXEC_1A_0T_1R | AML_CONSTANT),
@@ -495,7 +497,8 @@ const struct acpi_opcode_info acpi_gbl_aml_op_info[AML_NUM_OPCODES] = {
 		 AML_NSNODE | AML_NAMED | AML_DEFER),
 /* 59 */ ACPI_OP("Field", ARGP_FIELD_OP, ARGI_FIELD_OP, ACPI_TYPE_ANY,
 		 AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_FIELD,
-		 AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_FIELD),
+			 AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+			 AML_FIELD),
 /* 5A */ ACPI_OP("Device", ARGP_DEVICE_OP, ARGI_DEVICE_OP,
 		 ACPI_TYPE_DEVICE, AML_CLASS_NAMED_OBJECT,
 		 AML_TYPE_NAMED_NO_OBJ,
@@ -519,12 +522,13 @@ const struct acpi_opcode_info acpi_gbl_aml_op_info[AML_NUM_OPCODES] = {
 /* 5E */ ACPI_OP("IndexField", ARGP_INDEX_FIELD_OP, ARGI_INDEX_FIELD_OP,
 		 ACPI_TYPE_ANY, AML_CLASS_NAMED_OBJECT,
 		 AML_TYPE_NAMED_FIELD,
-		 AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_FIELD),
+		 	 AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+			 AML_FIELD),
 /* 5F */ ACPI_OP("BankField", ARGP_BANK_FIELD_OP, ARGI_BANK_FIELD_OP,
-		 ACPI_TYPE_LOCAL_BANK_FIELD, AML_CLASS_NAMED_OBJECT,
+		 	 ACPI_TYPE_LOCAL_BANK_FIELD,
-		 AML_TYPE_NAMED_FIELD,
+			 AML_CLASS_NAMED_OBJECT, AML_TYPE_NAMED_FIELD,
-		 AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_FIELD |
+		 	 AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
-		 AML_DEFER),
+			 AML_FIELD | AML_DEFER),
 
 /* Internal opcodes that map to invalid AML opcodes */
 
@@ -632,7 +636,8 @@ const struct acpi_opcode_info acpi_gbl_aml_op_info[AML_NUM_OPCODES] = {
 /* 7D */ ACPI_OP("[EvalSubTree]", ARGP_SCOPE_OP, ARGI_SCOPE_OP,
 		 ACPI_TYPE_ANY, AML_CLASS_NAMED_OBJECT,
 		 AML_TYPE_NAMED_NO_OBJ,
-		 AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE | AML_NSNODE),
+		 	 AML_HAS_ARGS | AML_NSOBJECT | AML_NSOPCODE |
+			 AML_NSNODE),
 
 /* ACPI 3.0 opcodes */
 

drivers/acpi/acpica/psparse.c

@@ -459,8 +459,9 @@ acpi_status acpi_ps_parse_aml(struct acpi_walk_state *walk_state)
 
 			/* Executing a control method - additional cleanup */
 
-			acpi_ds_terminate_control_method(
+			acpi_ds_terminate_control_method(walk_state->
-				walk_state->method_desc, walk_state);
+							 method_desc,
+							 walk_state);
 		}
 
 		acpi_ds_delete_walk_state(walk_state);

drivers/acpi/acpica/rscalc.c

@@ -457,6 +457,15 @@ acpi_rs_get_list_length(u8 * aml_buffer,
 			 * Get the number of vendor data bytes
 			 */
 			extra_struct_bytes = resource_length;
+
+			/*
+			 * There is already one byte included in the minimum
+			 * descriptor size. If there are extra struct bytes,
+			 * subtract one from the count.
+			 */
+			if (extra_struct_bytes) {
+				extra_struct_bytes--;
+			}
 			break;
 
 		case ACPI_RESOURCE_NAME_END_TAG:
@@ -664,8 +673,7 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
 						     (*sub_object_list)->string.
 						     length + 1);
 			} else {
-				temp_size_needed +=
+				temp_size_needed += acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
-				    acpi_ns_get_pathname_length((*sub_object_list)->reference.node);
 			}
 		} else {
 			/*

drivers/acpi/acpica/rslist.c

@@ -109,7 +109,7 @@ acpi_rs_convert_aml_to_resources(u8 * aml,
 		ACPI_ERROR((AE_INFO,
 			    "Invalid/unsupported resource descriptor: Type 0x%2.2X",
 			    resource_index));
-		return (AE_AML_INVALID_RESOURCE_TYPE);
+		return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
 	}
 
 	/* Convert the AML byte stream resource to a local resource struct */
@@ -200,7 +200,7 @@ acpi_rs_convert_resources_to_aml(struct acpi_resource *resource,
 			ACPI_ERROR((AE_INFO,
 				    "Invalid/unsupported resource descriptor: Type 0x%2.2X",
 				    resource->type));
-			return (AE_AML_INVALID_RESOURCE_TYPE);
+			return_ACPI_STATUS(AE_AML_INVALID_RESOURCE_TYPE);
 		}
 
 		status = acpi_rs_convert_resource_to_aml(resource,

drivers/acpi/acpica/tbfind.c

@@ -77,7 +77,7 @@ acpi_tb_find_table(char *signature,
 	/* Normalize the input strings */
 
 	ACPI_MEMSET(&header, 0, sizeof(struct acpi_table_header));
-	ACPI_STRNCPY(header.signature, signature, ACPI_NAME_SIZE);
+	ACPI_MOVE_NAME(header.signature, signature);
 	ACPI_STRNCPY(header.oem_id, oem_id, ACPI_OEM_ID_SIZE);
 	ACPI_STRNCPY(header.oem_table_id, oem_table_id, ACPI_OEM_TABLE_ID_SIZE);
 

drivers/acpi/acpica/tbinstal.c

@@ -526,6 +526,8 @@ void acpi_tb_terminate(void)
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "ACPI Tables freed\n"));
 	(void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+
+	return_VOID;
 }
 
 /*******************************************************************************

drivers/acpi/acpica/tbutils.c

@@ -354,7 +354,7 @@ u8 acpi_tb_checksum(u8 *buffer, u32 length)
 		sum = (u8) (sum + *(buffer++));
 	}
 
-	return sum;
+	return (sum);
 }
 
 /*******************************************************************************

drivers/acpi/acpica/tbxface.c

@@ -236,7 +236,7 @@ acpi_get_table_header(char *signature,
 						       sizeof(struct
 							      acpi_table_header));
 				if (!header) {
-					return AE_NO_MEMORY;
+					return (AE_NO_MEMORY);
 				}
 				ACPI_MEMCPY(out_table_header, header,
 					    sizeof(struct acpi_table_header));
@@ -244,7 +244,7 @@ acpi_get_table_header(char *signature,
 						     sizeof(struct
 							    acpi_table_header));
 			} else {
-				return AE_NOT_FOUND;
+				return (AE_NOT_FOUND);
 			}
 		} else {
 			ACPI_MEMCPY(out_table_header,

drivers/acpi/acpica/tbxfload.c

@@ -211,7 +211,7 @@ static acpi_status acpi_tb_load_namespace(void)
  * DESCRIPTION: Dynamically load an ACPI table from the caller's buffer. Must
  *              be a valid ACPI table with a valid ACPI table header.
  *              Note1: Mainly intended to support hotplug addition of SSDTs.
- *              Note2: Does not copy the incoming table. User is reponsible
+ *              Note2: Does not copy the incoming table. User is responsible
  *              to ensure that the table is not deleted or unmapped.
  *
  ******************************************************************************/

drivers/acpi/acpica/tbxfroot.c

@@ -67,7 +67,6 @@ static acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp);
 
 static acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp)
 {
-	ACPI_FUNCTION_ENTRY();
 
 	/*
 	 * The signature and checksum must both be correct

drivers/acpi/acpica/utcache.c

@@ -0,0 +1,323 @@
+/******************************************************************************
+ *
+ * Module Name: utcache - local cache allocation routines
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#define _COMPONENT          ACPI_UTILITIES
+ACPI_MODULE_NAME("utcache")
+
+#ifdef ACPI_USE_LOCAL_CACHE
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_os_create_cache
+ *
+ * PARAMETERS:  cache_name      - Ascii name for the cache
+ *              object_size     - Size of each cached object
+ *              max_depth       - Maximum depth of the cache (in objects)
+ *              return_cache    - Where the new cache object is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Create a cache object
+ *
+ ******************************************************************************/
+acpi_status
+acpi_os_create_cache(char *cache_name,
+		     u16 object_size,
+		     u16 max_depth, struct acpi_memory_list ** return_cache)
+{
+	struct acpi_memory_list *cache;
+
+	ACPI_FUNCTION_ENTRY();
+
+	if (!cache_name || !return_cache || (object_size < 16)) {
+		return (AE_BAD_PARAMETER);
+	}
+
+	/* Create the cache object */
+
+	cache = acpi_os_allocate(sizeof(struct acpi_memory_list));
+	if (!cache) {
+		return (AE_NO_MEMORY);
+	}
+
+	/* Populate the cache object and return it */
+
+	ACPI_MEMSET(cache, 0, sizeof(struct acpi_memory_list));
+	cache->link_offset = 8;
+	cache->list_name = cache_name;
+	cache->object_size = object_size;
+	cache->max_depth = max_depth;
+
+	*return_cache = cache;
+	return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_os_purge_cache
+ *
+ * PARAMETERS:  cache           - Handle to cache object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Free all objects within the requested cache.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_os_purge_cache(struct acpi_memory_list * cache)
+{
+	char *next;
+	acpi_status status;
+
+	ACPI_FUNCTION_ENTRY();
+
+	if (!cache) {
+		return (AE_BAD_PARAMETER);
+	}
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
+	if (ACPI_FAILURE(status)) {
+		return (status);
+	}
+
+	/* Walk the list of objects in this cache */
+
+	while (cache->list_head) {
+
+		/* Delete and unlink one cached state object */
+
+		next = *(ACPI_CAST_INDIRECT_PTR(char,
+						&(((char *)cache->
+						   list_head)[cache->
+							      link_offset])));
+		ACPI_FREE(cache->list_head);
+
+		cache->list_head = next;
+		cache->current_depth--;
+	}
+
+	(void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
+	return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_os_delete_cache
+ *
+ * PARAMETERS:  cache           - Handle to cache object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Free all objects within the requested cache and delete the
+ *              cache object.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_os_delete_cache(struct acpi_memory_list * cache)
+{
+	acpi_status status;
+
+	ACPI_FUNCTION_ENTRY();
+
+	/* Purge all objects in the cache */
+
+	status = acpi_os_purge_cache(cache);
+	if (ACPI_FAILURE(status)) {
+		return (status);
+	}
+
+	/* Now we can delete the cache object */
+
+	acpi_os_free(cache);
+	return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_os_release_object
+ *
+ * PARAMETERS:  cache       - Handle to cache object
+ *              object      - The object to be released
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Release an object to the specified cache. If cache is full,
+ *              the object is deleted.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_os_release_object(struct acpi_memory_list * cache, void *object)
+{
+	acpi_status status;
+
+	ACPI_FUNCTION_ENTRY();
+
+	if (!cache || !object) {
+		return (AE_BAD_PARAMETER);
+	}
+
+	/* If cache is full, just free this object */
+
+	if (cache->current_depth >= cache->max_depth) {
+		ACPI_FREE(object);
+		ACPI_MEM_TRACKING(cache->total_freed++);
+	}
+
+	/* Otherwise put this object back into the cache */
+
+	else {
+		status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
+		if (ACPI_FAILURE(status)) {
+			return (status);
+		}
+
+		/* Mark the object as cached */
+
+		ACPI_MEMSET(object, 0xCA, cache->object_size);
+		ACPI_SET_DESCRIPTOR_TYPE(object, ACPI_DESC_TYPE_CACHED);
+
+		/* Put the object at the head of the cache list */
+
+		*(ACPI_CAST_INDIRECT_PTR(char,
+					 &(((char *)object)[cache->
+							    link_offset]))) =
+		    cache->list_head;
+		cache->list_head = object;
+		cache->current_depth++;
+
+		(void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
+	}
+
+	return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_os_acquire_object
+ *
+ * PARAMETERS:  cache           - Handle to cache object
+ *
+ * RETURN:      the acquired object. NULL on error
+ *
+ * DESCRIPTION: Get an object from the specified cache. If cache is empty,
+ *              the object is allocated.
+ *
+ ******************************************************************************/
+
+void *acpi_os_acquire_object(struct acpi_memory_list *cache)
+{
+	acpi_status status;
+	void *object;
+
+	ACPI_FUNCTION_NAME(os_acquire_object);
+
+	if (!cache) {
+		return (NULL);
+	}
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
+	if (ACPI_FAILURE(status)) {
+		return (NULL);
+	}
+
+	ACPI_MEM_TRACKING(cache->requests++);
+
+	/* Check the cache first */
+
+	if (cache->list_head) {
+
+		/* There is an object available, use it */
+
+		object = cache->list_head;
+		cache->list_head = *(ACPI_CAST_INDIRECT_PTR(char,
+							    &(((char *)
+							       object)[cache->
+								       link_offset])));
+
+		cache->current_depth--;
+
+		ACPI_MEM_TRACKING(cache->hits++);
+		ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+				  "Object %p from %s cache\n", object,
+				  cache->list_name));
+
+		status = acpi_ut_release_mutex(ACPI_MTX_CACHES);
+		if (ACPI_FAILURE(status)) {
+			return (NULL);
+		}
+
+		/* Clear (zero) the previously used Object */
+
+		ACPI_MEMSET(object, 0, cache->object_size);
+	} else {
+		/* The cache is empty, create a new object */
+
+		ACPI_MEM_TRACKING(cache->total_allocated++);
+
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+		if ((cache->total_allocated - cache->total_freed) >
+		    cache->max_occupied) {
+			cache->max_occupied =
+			    cache->total_allocated - cache->total_freed;
+		}
+#endif
+
+		/* Avoid deadlock with ACPI_ALLOCATE_ZEROED */
+
+		status = acpi_ut_release_mutex(ACPI_MTX_CACHES);
+		if (ACPI_FAILURE(status)) {
+			return (NULL);
+		}
+
+		object = ACPI_ALLOCATE_ZEROED(cache->object_size);
+		if (!object) {
+			return (NULL);
+		}
+	}
+
+	return (object);
+}
+#endif				/* ACPI_USE_LOCAL_CACHE */

drivers/acpi/acpica/utclib.c

@@ -0,0 +1,749 @@
+/******************************************************************************
+ *
+ * Module Name: cmclib - Local implementation of C library functions
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+/*
+ * These implementations of standard C Library routines can optionally be
+ * used if a C library is not available. In general, they are less efficient
+ * than an inline or assembly implementation
+ */
+
+#define _COMPONENT          ACPI_UTILITIES
+ACPI_MODULE_NAME("cmclib")
+
+#ifndef ACPI_USE_SYSTEM_CLIBRARY
+#define NEGATIVE    1
+#define POSITIVE    0
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_memcmp (memcmp)
+ *
+ * PARAMETERS:  buffer1         - First Buffer
+ *              buffer2         - Second Buffer
+ *              count           - Maximum # of bytes to compare
+ *
+ * RETURN:      Index where Buffers mismatched, or 0 if Buffers matched
+ *
+ * DESCRIPTION: Compare two Buffers, with a maximum length
+ *
+ ******************************************************************************/
+int acpi_ut_memcmp(const char *buffer1, const char *buffer2, acpi_size count)
+{
+
+	return ((count == ACPI_SIZE_MAX) ? 0 : ((unsigned char)*buffer1 -
+						(unsigned char)*buffer2));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_memcpy (memcpy)
+ *
+ * PARAMETERS:  dest        - Target of the copy
+ *              src         - Source buffer to copy
+ *              count       - Number of bytes to copy
+ *
+ * RETURN:      Dest
+ *
+ * DESCRIPTION: Copy arbitrary bytes of memory
+ *
+ ******************************************************************************/
+
+void *acpi_ut_memcpy(void *dest, const void *src, acpi_size count)
+{
+	char *new = (char *)dest;
+	char *old = (char *)src;
+
+	while (count) {
+		*new = *old;
+		new++;
+		old++;
+		count--;
+	}
+
+	return (dest);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_memset (memset)
+ *
+ * PARAMETERS:  dest        - Buffer to set
+ *              value       - Value to set each byte of memory
+ *              count       - Number of bytes to set
+ *
+ * RETURN:      Dest
+ *
+ * DESCRIPTION: Initialize a buffer to a known value.
+ *
+ ******************************************************************************/
+
+void *acpi_ut_memset(void *dest, u8 value, acpi_size count)
+{
+	char *new = (char *)dest;
+
+	while (count) {
+		*new = (char)value;
+		new++;
+		count--;
+	}
+
+	return (dest);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strlen (strlen)
+ *
+ * PARAMETERS:  string              - Null terminated string
+ *
+ * RETURN:      Length
+ *
+ * DESCRIPTION: Returns the length of the input string
+ *
+ ******************************************************************************/
+
+acpi_size acpi_ut_strlen(const char *string)
+{
+	u32 length = 0;
+
+	/* Count the string until a null is encountered */
+
+	while (*string) {
+		length++;
+		string++;
+	}
+
+	return (length);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strcpy (strcpy)
+ *
+ * PARAMETERS:  dst_string      - Target of the copy
+ *              src_string      - The source string to copy
+ *
+ * RETURN:      dst_string
+ *
+ * DESCRIPTION: Copy a null terminated string
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strcpy(char *dst_string, const char *src_string)
+{
+	char *string = dst_string;
+
+	/* Move bytes brute force */
+
+	while (*src_string) {
+		*string = *src_string;
+
+		string++;
+		src_string++;
+	}
+
+	/* Null terminate */
+
+	*string = 0;
+	return (dst_string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strncpy (strncpy)
+ *
+ * PARAMETERS:  dst_string      - Target of the copy
+ *              src_string      - The source string to copy
+ *              count           - Maximum # of bytes to copy
+ *
+ * RETURN:      dst_string
+ *
+ * DESCRIPTION: Copy a null terminated string, with a maximum length
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strncpy(char *dst_string, const char *src_string, acpi_size count)
+{
+	char *string = dst_string;
+
+	/* Copy the string */
+
+	for (string = dst_string;
+	     count && (count--, (*string++ = *src_string++));) {;
+	}
+
+	/* Pad with nulls if necessary */
+
+	while (count--) {
+		*string = 0;
+		string++;
+	}
+
+	/* Return original pointer */
+
+	return (dst_string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strcmp (strcmp)
+ *
+ * PARAMETERS:  string1         - First string
+ *              string2         - Second string
+ *
+ * RETURN:      Index where strings mismatched, or 0 if strings matched
+ *
+ * DESCRIPTION: Compare two null terminated strings
+ *
+ ******************************************************************************/
+
+int acpi_ut_strcmp(const char *string1, const char *string2)
+{
+
+	for (; (*string1 == *string2); string2++) {
+		if (!*string1++) {
+			return (0);
+		}
+	}
+
+	return ((unsigned char)*string1 - (unsigned char)*string2);
+}
+
+#ifdef ACPI_FUTURE_IMPLEMENTATION
+/* Not used at this time */
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strchr (strchr)
+ *
+ * PARAMETERS:  string          - Search string
+ *              ch              - character to search for
+ *
+ * RETURN:      Ptr to char or NULL if not found
+ *
+ * DESCRIPTION: Search a string for a character
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strchr(const char *string, int ch)
+{
+
+	for (; (*string); string++) {
+		if ((*string) == (char)ch) {
+			return ((char *)string);
+		}
+	}
+
+	return (NULL);
+}
+#endif
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strncmp (strncmp)
+ *
+ * PARAMETERS:  string1         - First string
+ *              string2         - Second string
+ *              count           - Maximum # of bytes to compare
+ *
+ * RETURN:      Index where strings mismatched, or 0 if strings matched
+ *
+ * DESCRIPTION: Compare two null terminated strings, with a maximum length
+ *
+ ******************************************************************************/
+
+int acpi_ut_strncmp(const char *string1, const char *string2, acpi_size count)
+{
+
+	for (; count-- && (*string1 == *string2); string2++) {
+		if (!*string1++) {
+			return (0);
+		}
+	}
+
+	return ((count == ACPI_SIZE_MAX) ? 0 : ((unsigned char)*string1 -
+						(unsigned char)*string2));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strcat (Strcat)
+ *
+ * PARAMETERS:  dst_string      - Target of the copy
+ *              src_string      - The source string to copy
+ *
+ * RETURN:      dst_string
+ *
+ * DESCRIPTION: Append a null terminated string to a null terminated string
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strcat(char *dst_string, const char *src_string)
+{
+	char *string;
+
+	/* Find end of the destination string */
+
+	for (string = dst_string; *string++;) {;
+	}
+
+	/* Concatenate the string */
+
+	for (--string; (*string++ = *src_string++);) {;
+	}
+
+	return (dst_string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strncat (strncat)
+ *
+ * PARAMETERS:  dst_string      - Target of the copy
+ *              src_string      - The source string to copy
+ *              count           - Maximum # of bytes to copy
+ *
+ * RETURN:      dst_string
+ *
+ * DESCRIPTION: Append a null terminated string to a null terminated string,
+ *              with a maximum count.
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strncat(char *dst_string, const char *src_string, acpi_size count)
+{
+	char *string;
+
+	if (count) {
+
+		/* Find end of the destination string */
+
+		for (string = dst_string; *string++;) {;
+		}
+
+		/* Concatenate the string */
+
+		for (--string; (*string++ = *src_string++) && --count;) {;
+		}
+
+		/* Null terminate if necessary */
+
+		if (!count) {
+			*string = 0;
+		}
+	}
+
+	return (dst_string);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strstr (strstr)
+ *
+ * PARAMETERS:  string1         - Target string
+ *              string2         - Substring to search for
+ *
+ * RETURN:      Where substring match starts, Null if no match found
+ *
+ * DESCRIPTION: Checks if String2 occurs in String1. This is not really a
+ *              full implementation of strstr, only sufficient for command
+ *              matching
+ *
+ ******************************************************************************/
+
+char *acpi_ut_strstr(char *string1, char *string2)
+{
+	char *string;
+
+	if (acpi_ut_strlen(string2) > acpi_ut_strlen(string1)) {
+		return (NULL);
+	}
+
+	/* Walk entire string, comparing the letters */
+
+	for (string = string1; *string2;) {
+		if (*string2 != *string) {
+			return (NULL);
+		}
+
+		string2++;
+		string++;
+	}
+
+	return (string1);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strtoul (strtoul)
+ *
+ * PARAMETERS:  string          - Null terminated string
+ *              terminater      - Where a pointer to the terminating byte is
+ *                                returned
+ *              base            - Radix of the string
+ *
+ * RETURN:      Converted value
+ *
+ * DESCRIPTION: Convert a string into a 32-bit unsigned value.
+ *              Note: use acpi_ut_strtoul64 for 64-bit integers.
+ *
+ ******************************************************************************/
+
+u32 acpi_ut_strtoul(const char *string, char **terminator, u32 base)
+{
+	u32 converted = 0;
+	u32 index;
+	u32 sign;
+	const char *string_start;
+	u32 return_value = 0;
+	acpi_status status = AE_OK;
+
+	/*
+	 * Save the value of the pointer to the buffer's first
+	 * character, save the current errno value, and then
+	 * skip over any white space in the buffer:
+	 */
+	string_start = string;
+	while (ACPI_IS_SPACE(*string) || *string == '\t') {
+		++string;
+	}
+
+	/*
+	 * The buffer may contain an optional plus or minus sign.
+	 * If it does, then skip over it but remember what is was:
+	 */
+	if (*string == '-') {
+		sign = NEGATIVE;
+		++string;
+	} else if (*string == '+') {
+		++string;
+		sign = POSITIVE;
+	} else {
+		sign = POSITIVE;
+	}
+
+	/*
+	 * If the input parameter Base is zero, then we need to
+	 * determine if it is octal, decimal, or hexadecimal:
+	 */
+	if (base == 0) {
+		if (*string == '0') {
+			if (acpi_ut_to_lower(*(++string)) == 'x') {
+				base = 16;
+				++string;
+			} else {
+				base = 8;
+			}
+		} else {
+			base = 10;
+		}
+	} else if (base < 2 || base > 36) {
+		/*
+		 * The specified Base parameter is not in the domain of
+		 * this function:
+		 */
+		goto done;
+	}
+
+	/*
+	 * For octal and hexadecimal bases, skip over the leading
+	 * 0 or 0x, if they are present.
+	 */
+	if (base == 8 && *string == '0') {
+		string++;
+	}
+
+	if (base == 16 &&
+	    *string == '0' && acpi_ut_to_lower(*(++string)) == 'x') {
+		string++;
+	}
+
+	/*
+	 * Main loop: convert the string to an unsigned long:
+	 */
+	while (*string) {
+		if (ACPI_IS_DIGIT(*string)) {
+			index = (u32)((u8)*string - '0');
+		} else {
+			index = (u32)acpi_ut_to_upper(*string);
+			if (ACPI_IS_UPPER(index)) {
+				index = index - 'A' + 10;
+			} else {
+				goto done;
+			}
+		}
+
+		if (index >= base) {
+			goto done;
+		}
+
+		/*
+		 * Check to see if value is out of range:
+		 */
+
+		if (return_value > ((ACPI_UINT32_MAX - (u32)index) / (u32)base)) {
+			status = AE_ERROR;
+			return_value = 0;	/* reset */
+		} else {
+			return_value *= base;
+			return_value += index;
+			converted = 1;
+		}
+
+		++string;
+	}
+
+      done:
+	/*
+	 * If appropriate, update the caller's pointer to the next
+	 * unconverted character in the buffer.
+	 */
+	if (terminator) {
+		if (converted == 0 && return_value == 0 && string != NULL) {
+			*terminator = (char *)string_start;
+		} else {
+			*terminator = (char *)string;
+		}
+	}
+
+	if (status == AE_ERROR) {
+		return_value = ACPI_UINT32_MAX;
+	}
+
+	/*
+	 * If a minus sign was present, then "the conversion is negated":
+	 */
+	if (sign == NEGATIVE) {
+		return_value = (ACPI_UINT32_MAX - return_value) + 1;
+	}
+
+	return (return_value);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_to_upper (TOUPPER)
+ *
+ * PARAMETERS:  c           - Character to convert
+ *
+ * RETURN:      Converted character as an int
+ *
+ * DESCRIPTION: Convert character to uppercase
+ *
+ ******************************************************************************/
+
+int acpi_ut_to_upper(int c)
+{
+
+	return (ACPI_IS_LOWER(c) ? ((c) - 0x20) : (c));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_to_lower (TOLOWER)
+ *
+ * PARAMETERS:  c           - Character to convert
+ *
+ * RETURN:      Converted character as an int
+ *
+ * DESCRIPTION: Convert character to lowercase
+ *
+ ******************************************************************************/
+
+int acpi_ut_to_lower(int c)
+{
+
+	return (ACPI_IS_UPPER(c) ? ((c) + 0x20) : (c));
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    is* functions
+ *
+ * DESCRIPTION: is* functions use the ctype table below
+ *
+ ******************************************************************************/
+
+const u8 _acpi_ctype[257] = {
+	_ACPI_CN,		/* 0x00     0 NUL */
+	_ACPI_CN,		/* 0x01     1 SOH */
+	_ACPI_CN,		/* 0x02     2 STX */
+	_ACPI_CN,		/* 0x03     3 ETX */
+	_ACPI_CN,		/* 0x04     4 EOT */
+	_ACPI_CN,		/* 0x05     5 ENQ */
+	_ACPI_CN,		/* 0x06     6 ACK */
+	_ACPI_CN,		/* 0x07     7 BEL */
+	_ACPI_CN,		/* 0x08     8 BS  */
+	_ACPI_CN | _ACPI_SP,	/* 0x09     9 TAB */
+	_ACPI_CN | _ACPI_SP,	/* 0x0A    10 LF  */
+	_ACPI_CN | _ACPI_SP,	/* 0x0B    11 VT  */
+	_ACPI_CN | _ACPI_SP,	/* 0x0C    12 FF  */
+	_ACPI_CN | _ACPI_SP,	/* 0x0D    13 CR  */
+	_ACPI_CN,		/* 0x0E    14 SO  */
+	_ACPI_CN,		/* 0x0F    15 SI  */
+	_ACPI_CN,		/* 0x10    16 DLE */
+	_ACPI_CN,		/* 0x11    17 DC1 */
+	_ACPI_CN,		/* 0x12    18 DC2 */
+	_ACPI_CN,		/* 0x13    19 DC3 */
+	_ACPI_CN,		/* 0x14    20 DC4 */
+	_ACPI_CN,		/* 0x15    21 NAK */
+	_ACPI_CN,		/* 0x16    22 SYN */
+	_ACPI_CN,		/* 0x17    23 ETB */
+	_ACPI_CN,		/* 0x18    24 CAN */
+	_ACPI_CN,		/* 0x19    25 EM  */
+	_ACPI_CN,		/* 0x1A    26 SUB */
+	_ACPI_CN,		/* 0x1B    27 ESC */
+	_ACPI_CN,		/* 0x1C    28 FS  */
+	_ACPI_CN,		/* 0x1D    29 GS  */
+	_ACPI_CN,		/* 0x1E    30 RS  */
+	_ACPI_CN,		/* 0x1F    31 US  */
+	_ACPI_XS | _ACPI_SP,	/* 0x20    32 ' ' */
+	_ACPI_PU,		/* 0x21    33 '!' */
+	_ACPI_PU,		/* 0x22    34 '"' */
+	_ACPI_PU,		/* 0x23    35 '#' */
+	_ACPI_PU,		/* 0x24    36 '$' */
+	_ACPI_PU,		/* 0x25    37 '%' */
+	_ACPI_PU,		/* 0x26    38 '&' */
+	_ACPI_PU,		/* 0x27    39 ''' */
+	_ACPI_PU,		/* 0x28    40 '(' */
+	_ACPI_PU,		/* 0x29    41 ')' */
+	_ACPI_PU,		/* 0x2A    42 '*' */
+	_ACPI_PU,		/* 0x2B    43 '+' */
+	_ACPI_PU,		/* 0x2C    44 ',' */
+	_ACPI_PU,		/* 0x2D    45 '-' */
+	_ACPI_PU,		/* 0x2E    46 '.' */
+	_ACPI_PU,		/* 0x2F    47 '/' */
+	_ACPI_XD | _ACPI_DI,	/* 0x30    48 '0' */
+	_ACPI_XD | _ACPI_DI,	/* 0x31    49 '1' */
+	_ACPI_XD | _ACPI_DI,	/* 0x32    50 '2' */
+	_ACPI_XD | _ACPI_DI,	/* 0x33    51 '3' */
+	_ACPI_XD | _ACPI_DI,	/* 0x34    52 '4' */
+	_ACPI_XD | _ACPI_DI,	/* 0x35    53 '5' */
+	_ACPI_XD | _ACPI_DI,	/* 0x36    54 '6' */
+	_ACPI_XD | _ACPI_DI,	/* 0x37    55 '7' */
+	_ACPI_XD | _ACPI_DI,	/* 0x38    56 '8' */
+	_ACPI_XD | _ACPI_DI,	/* 0x39    57 '9' */
+	_ACPI_PU,		/* 0x3A    58 ':' */
+	_ACPI_PU,		/* 0x3B    59 ';' */
+	_ACPI_PU,		/* 0x3C    60 '<' */
+	_ACPI_PU,		/* 0x3D    61 '=' */
+	_ACPI_PU,		/* 0x3E    62 '>' */
+	_ACPI_PU,		/* 0x3F    63 '?' */
+	_ACPI_PU,		/* 0x40    64 '@' */
+	_ACPI_XD | _ACPI_UP,	/* 0x41    65 'A' */
+	_ACPI_XD | _ACPI_UP,	/* 0x42    66 'B' */
+	_ACPI_XD | _ACPI_UP,	/* 0x43    67 'C' */
+	_ACPI_XD | _ACPI_UP,	/* 0x44    68 'D' */
+	_ACPI_XD | _ACPI_UP,	/* 0x45    69 'E' */
+	_ACPI_XD | _ACPI_UP,	/* 0x46    70 'F' */
+	_ACPI_UP,		/* 0x47    71 'G' */
+	_ACPI_UP,		/* 0x48    72 'H' */
+	_ACPI_UP,		/* 0x49    73 'I' */
+	_ACPI_UP,		/* 0x4A    74 'J' */
+	_ACPI_UP,		/* 0x4B    75 'K' */
+	_ACPI_UP,		/* 0x4C    76 'L' */
+	_ACPI_UP,		/* 0x4D    77 'M' */
+	_ACPI_UP,		/* 0x4E    78 'N' */
+	_ACPI_UP,		/* 0x4F    79 'O' */
+	_ACPI_UP,		/* 0x50    80 'P' */
+	_ACPI_UP,		/* 0x51    81 'Q' */
+	_ACPI_UP,		/* 0x52    82 'R' */
+	_ACPI_UP,		/* 0x53    83 'S' */
+	_ACPI_UP,		/* 0x54    84 'T' */
+	_ACPI_UP,		/* 0x55    85 'U' */
+	_ACPI_UP,		/* 0x56    86 'V' */
+	_ACPI_UP,		/* 0x57    87 'W' */
+	_ACPI_UP,		/* 0x58    88 'X' */
+	_ACPI_UP,		/* 0x59    89 'Y' */
+	_ACPI_UP,		/* 0x5A    90 'Z' */
+	_ACPI_PU,		/* 0x5B    91 '[' */
+	_ACPI_PU,		/* 0x5C    92 '\' */
+	_ACPI_PU,		/* 0x5D    93 ']' */
+	_ACPI_PU,		/* 0x5E    94 '^' */
+	_ACPI_PU,		/* 0x5F    95 '_' */
+	_ACPI_PU,		/* 0x60    96 '`' */
+	_ACPI_XD | _ACPI_LO,	/* 0x61    97 'a' */
+	_ACPI_XD | _ACPI_LO,	/* 0x62    98 'b' */
+	_ACPI_XD | _ACPI_LO,	/* 0x63    99 'c' */
+	_ACPI_XD | _ACPI_LO,	/* 0x64   100 'd' */
+	_ACPI_XD | _ACPI_LO,	/* 0x65   101 'e' */
+	_ACPI_XD | _ACPI_LO,	/* 0x66   102 'f' */
+	_ACPI_LO,		/* 0x67   103 'g' */
+	_ACPI_LO,		/* 0x68   104 'h' */
+	_ACPI_LO,		/* 0x69   105 'i' */
+	_ACPI_LO,		/* 0x6A   106 'j' */
+	_ACPI_LO,		/* 0x6B   107 'k' */
+	_ACPI_LO,		/* 0x6C   108 'l' */
+	_ACPI_LO,		/* 0x6D   109 'm' */
+	_ACPI_LO,		/* 0x6E   110 'n' */
+	_ACPI_LO,		/* 0x6F   111 'o' */
+	_ACPI_LO,		/* 0x70   112 'p' */
+	_ACPI_LO,		/* 0x71   113 'q' */
+	_ACPI_LO,		/* 0x72   114 'r' */
+	_ACPI_LO,		/* 0x73   115 's' */
+	_ACPI_LO,		/* 0x74   116 't' */
+	_ACPI_LO,		/* 0x75   117 'u' */
+	_ACPI_LO,		/* 0x76   118 'v' */
+	_ACPI_LO,		/* 0x77   119 'w' */
+	_ACPI_LO,		/* 0x78   120 'x' */
+	_ACPI_LO,		/* 0x79   121 'y' */
+	_ACPI_LO,		/* 0x7A   122 'z' */
+	_ACPI_PU,		/* 0x7B   123 '{' */
+	_ACPI_PU,		/* 0x7C   124 '|' */
+	_ACPI_PU,		/* 0x7D   125 '}' */
+	_ACPI_PU,		/* 0x7E   126 '~' */
+	_ACPI_CN,		/* 0x7F   127 DEL */
+
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0x80 to 0x8F    */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0x90 to 0x9F    */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0xA0 to 0xAF    */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0xB0 to 0xBF    */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0xC0 to 0xCF    */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0xD0 to 0xDF    */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0xE0 to 0xEF    */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,	/* 0xF0 to 0xFF    */
+	0			/* 0x100 */
+};
+
+#endif				/* ACPI_USE_SYSTEM_CLIBRARY */

drivers/acpi/acpica/utdebug.c

@@ -47,8 +47,9 @@
 
 #define _COMPONENT          ACPI_UTILITIES
 ACPI_MODULE_NAME("utdebug")
+
 #ifdef ACPI_DEBUG_OUTPUT
-static acpi_thread_id acpi_gbl_prev_thread_id;
+static acpi_thread_id acpi_gbl_prev_thread_id = (acpi_thread_id) 0xFFFFFFFF;
 static char *acpi_gbl_fn_entry_str = "----Entry";
 static char *acpi_gbl_fn_exit_str = "----Exit-";
 
@@ -109,7 +110,7 @@ void acpi_ut_track_stack_ptr(void)
  * RETURN:      Updated pointer to the function name
  *
  * DESCRIPTION: Remove the "Acpi" prefix from the function name, if present.
- *              This allows compiler macros such as __func__ to be used
+ *              This allows compiler macros such as __FUNCTION__ to be used
  *              with no change to the debug output.
  *
  ******************************************************************************/
@@ -299,6 +300,7 @@ acpi_ut_trace_ptr(u32 line_number,
 		  const char *function_name,
 		  const char *module_name, u32 component_id, void *pointer)
 {
+
 	acpi_gbl_nesting_level++;
 	acpi_ut_track_stack_ptr();
 
@@ -511,7 +513,7 @@ acpi_ut_ptr_exit(u32 line_number,
  * PARAMETERS:  buffer              - Buffer to dump
  *              count               - Amount to dump, in bytes
  *              display             - BYTE, WORD, DWORD, or QWORD display
- *              component_ID        - Caller's component ID
+ *              offset              - Beginning buffer offset (display only)
  *
  * RETURN:      None
  *
@@ -519,7 +521,7 @@ acpi_ut_ptr_exit(u32 line_number,
  *
  ******************************************************************************/
 
-void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display)
+void acpi_ut_dump_buffer(u8 *buffer, u32 count, u32 display, u32 base_offset)
 {
 	u32 i = 0;
 	u32 j;
@@ -541,7 +543,7 @@ void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display)
 
 		/* Print current offset */
 
-		acpi_os_printf("%6.4X: ", i);
+		acpi_os_printf("%6.4X: ", (base_offset + i));
 
 		/* Print 16 hex chars */
 
@@ -623,7 +625,7 @@ void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display)
 
 /*******************************************************************************
  *
- * FUNCTION:    acpi_ut_dump_buffer
+ * FUNCTION:    acpi_ut_debug_dump_buffer
  *
  * PARAMETERS:  buffer              - Buffer to dump
  *              count               - Amount to dump, in bytes
@@ -636,7 +638,8 @@ void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display)
  *
  ******************************************************************************/
 
-void acpi_ut_dump_buffer(u8 * buffer, u32 count, u32 display, u32 component_id)
+void
+acpi_ut_debug_dump_buffer(u8 *buffer, u32 count, u32 display, u32 component_id)
 {
 
 	/* Only dump the buffer if tracing is enabled */
@@ -646,5 +649,5 @@ void acpi_ut_dump_buffer(u8 * buffer, u32 count, u32 display, u32 component_id)
 		return;
 	}
 
-	acpi_ut_dump_buffer2(buffer, count, display);
+	acpi_ut_dump_buffer(buffer, count, display, 0);
 }

drivers/acpi/acpica/utids.c

@@ -67,10 +67,10 @@ ACPI_MODULE_NAME("utids")
  ******************************************************************************/
 acpi_status
 acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
-		    struct acpica_device_id **return_id)
+		    struct acpi_pnp_device_id **return_id)
 {
 	union acpi_operand_object *obj_desc;
-	struct acpica_device_id *hid;
+	struct acpi_pnp_device_id *hid;
 	u32 length;
 	acpi_status status;
 
@@ -94,16 +94,17 @@ acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
 	/* Allocate a buffer for the HID */
 
 	hid =
-	    ACPI_ALLOCATE_ZEROED(sizeof(struct acpica_device_id) +
+	    ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pnp_device_id) +
 				 (acpi_size) length);
 	if (!hid) {
 		status = AE_NO_MEMORY;
 		goto cleanup;
 	}
 
-	/* Area for the string starts after DEVICE_ID struct */
+	/* Area for the string starts after PNP_DEVICE_ID struct */
 
-	hid->string = ACPI_ADD_PTR(char, hid, sizeof(struct acpica_device_id));
+	hid->string =
+	    ACPI_ADD_PTR(char, hid, sizeof(struct acpi_pnp_device_id));
 
 	/* Convert EISAID to a string or simply copy existing string */
 
@@ -124,6 +125,73 @@ cleanup:
 	return_ACPI_STATUS(status);
 }
 
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_execute_SUB
+ *
+ * PARAMETERS:  device_node         - Node for the device
+ *              return_id           - Where the _SUB is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Executes the _SUB control method that returns the subsystem
+ *              ID of the device. The _SUB value is always a string containing
+ *              either a valid PNP or ACPI ID.
+ *
+ *              NOTE: Internal function, no parameter validation
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ut_execute_SUB(struct acpi_namespace_node *device_node,
+		    struct acpi_pnp_device_id **return_id)
+{
+	union acpi_operand_object *obj_desc;
+	struct acpi_pnp_device_id *sub;
+	u32 length;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE(ut_execute_SUB);
+
+	status = acpi_ut_evaluate_object(device_node, METHOD_NAME__SUB,
+					 ACPI_BTYPE_STRING, &obj_desc);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* Get the size of the String to be returned, includes null terminator */
+
+	length = obj_desc->string.length + 1;
+
+	/* Allocate a buffer for the SUB */
+
+	sub =
+	    ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pnp_device_id) +
+				 (acpi_size) length);
+	if (!sub) {
+		status = AE_NO_MEMORY;
+		goto cleanup;
+	}
+
+	/* Area for the string starts after PNP_DEVICE_ID struct */
+
+	sub->string =
+	    ACPI_ADD_PTR(char, sub, sizeof(struct acpi_pnp_device_id));
+
+	/* Simply copy existing string */
+
+	ACPI_STRCPY(sub->string, obj_desc->string.pointer);
+	sub->length = length;
+	*return_id = sub;
+
+      cleanup:
+
+	/* On exit, we must delete the return object */
+
+	acpi_ut_remove_reference(obj_desc);
+	return_ACPI_STATUS(status);
+}
+
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ut_execute_UID
@@ -144,10 +212,10 @@ cleanup:
 
 acpi_status
 acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
-		    struct acpica_device_id **return_id)
+		    struct acpi_pnp_device_id **return_id)
 {
 	union acpi_operand_object *obj_desc;
-	struct acpica_device_id *uid;
+	struct acpi_pnp_device_id *uid;
 	u32 length;
 	acpi_status status;
 
@@ -171,16 +239,17 @@ acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
 	/* Allocate a buffer for the UID */
 
 	uid =
-	    ACPI_ALLOCATE_ZEROED(sizeof(struct acpica_device_id) +
+	    ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pnp_device_id) +
 				 (acpi_size) length);
 	if (!uid) {
 		status = AE_NO_MEMORY;
 		goto cleanup;
 	}
 
-	/* Area for the string starts after DEVICE_ID struct */
+	/* Area for the string starts after PNP_DEVICE_ID struct */
 
-	uid->string = ACPI_ADD_PTR(char, uid, sizeof(struct acpica_device_id));
+	uid->string =
+	    ACPI_ADD_PTR(char, uid, sizeof(struct acpi_pnp_device_id));
 
 	/* Convert an Integer to string, or just copy an existing string */
 
@@ -226,11 +295,11 @@ cleanup:
 
 acpi_status
 acpi_ut_execute_CID(struct acpi_namespace_node *device_node,
-		    struct acpica_device_id_list **return_cid_list)
+		    struct acpi_pnp_device_id_list **return_cid_list)
 {
 	union acpi_operand_object **cid_objects;
 	union acpi_operand_object *obj_desc;
-	struct acpica_device_id_list *cid_list;
+	struct acpi_pnp_device_id_list *cid_list;
 	char *next_id_string;
 	u32 string_area_size;
 	u32 length;
@@ -288,11 +357,12 @@ acpi_ut_execute_CID(struct acpi_namespace_node *device_node,
 	/*
 	 * Now that we know the length of the CIDs, allocate return buffer:
 	 * 1) Size of the base structure +
-	 * 2) Size of the CID DEVICE_ID array +
+	 * 2) Size of the CID PNP_DEVICE_ID array +
 	 * 3) Size of the actual CID strings
 	 */
-	cid_list_size = sizeof(struct acpica_device_id_list) +
+	cid_list_size = sizeof(struct acpi_pnp_device_id_list) +
-	    ((count - 1) * sizeof(struct acpica_device_id)) + string_area_size;
+	    ((count - 1) * sizeof(struct acpi_pnp_device_id)) +
+	    string_area_size;
 
 	cid_list = ACPI_ALLOCATE_ZEROED(cid_list_size);
 	if (!cid_list) {
@@ -300,10 +370,10 @@ acpi_ut_execute_CID(struct acpi_namespace_node *device_node,
 		goto cleanup;
 	}
 
-	/* Area for CID strings starts after the CID DEVICE_ID array */
+	/* Area for CID strings starts after the CID PNP_DEVICE_ID array */
 
 	next_id_string = ACPI_CAST_PTR(char, cid_list->ids) +
-	    ((acpi_size) count * sizeof(struct acpica_device_id));
+	    ((acpi_size) count * sizeof(struct acpi_pnp_device_id));
 
 	/* Copy/convert the CIDs to the return buffer */
 

drivers/acpi/acpica/utmisc.c

@@ -41,8 +41,6 @@
  * POSSIBILITY OF SUCH DAMAGES.
  */
 
-#include <linux/module.h>
-
 #include <acpi/acpi.h>
 #include "accommon.h"
 #include "acnamesp.h"
@@ -201,8 +199,8 @@ acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id)
 				 */
 				acpi_gbl_owner_id_mask[j] |= (1 << k);
 
-				acpi_gbl_last_owner_id_index = (u8) j;
+				acpi_gbl_last_owner_id_index = (u8)j;
-				acpi_gbl_next_owner_id_offset = (u8) (k + 1);
+				acpi_gbl_next_owner_id_offset = (u8)(k + 1);
 
 				/*
 				 * Construct encoded ID from the index and bit position
@@ -339,6 +337,73 @@ void acpi_ut_strupr(char *src_string)
 	return;
 }
 
+#ifdef ACPI_ASL_COMPILER
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strlwr (strlwr)
+ *
+ * PARAMETERS:  src_string      - The source string to convert
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Convert string to lowercase
+ *
+ * NOTE: This is not a POSIX function, so it appears here, not in utclib.c
+ *
+ ******************************************************************************/
+
+void acpi_ut_strlwr(char *src_string)
+{
+	char *string;
+
+	ACPI_FUNCTION_ENTRY();
+
+	if (!src_string) {
+		return;
+	}
+
+	/* Walk entire string, lowercasing the letters */
+
+	for (string = src_string; *string; string++) {
+		*string = (char)ACPI_TOLOWER(*string);
+	}
+
+	return;
+}
+
+/******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_stricmp
+ *
+ * PARAMETERS:  string1             - first string to compare
+ *              string2             - second string to compare
+ *
+ * RETURN:      int that signifies string relationship. Zero means strings
+ *              are equal.
+ *
+ * DESCRIPTION: Implementation of the non-ANSI stricmp function (compare
+ *              strings with no case sensitivity)
+ *
+ ******************************************************************************/
+
+int acpi_ut_stricmp(char *string1, char *string2)
+{
+	int c1;
+	int c2;
+
+	do {
+		c1 = tolower((int)*string1);
+		c2 = tolower((int)*string2);
+
+		string1++;
+		string2++;
+	}
+	while ((c1 == c2) && (c1));
+
+	return (c1 - c2);
+}
+#endif
+
 /*******************************************************************************
  *
  * FUNCTION:    acpi_ut_print_string
@@ -638,29 +703,59 @@ u8 acpi_ut_valid_acpi_name(u32 name)
  * RETURN:      Repaired version of the name
  *
  * DESCRIPTION: Repair an ACPI name: Change invalid characters to '*' and
- *              return the new name.
+ *              return the new name. NOTE: the Name parameter must reside in
+ *              read/write memory, cannot be a const.
+ *
+ * An ACPI Name must consist of valid ACPI characters. We will repair the name
+ * if necessary because we don't want to abort because of this, but we want
+ * all namespace names to be printable. A warning message is appropriate.
+ *
+ * This issue came up because there are in fact machines that exhibit
+ * this problem, and we want to be able to enable ACPI support for them,
+ * even though there are a few bad names.
  *
  ******************************************************************************/
 
-acpi_name acpi_ut_repair_name(char *name)
+void acpi_ut_repair_name(char *name)
 {
 	u32 i;
-	char new_name[ACPI_NAME_SIZE];
+	u8 found_bad_char = FALSE;
+	u32 original_name;
+
+	ACPI_FUNCTION_NAME(ut_repair_name);
+
+	ACPI_MOVE_NAME(&original_name, name);
+
+	/* Check each character in the name */
 
 	for (i = 0; i < ACPI_NAME_SIZE; i++) {
-		new_name[i] = name[i];
+		if (acpi_ut_valid_acpi_char(name[i], i)) {
+			continue;
+		}
 
 		/*
 		 * Replace a bad character with something printable, yet technically
 		 * still invalid. This prevents any collisions with existing "good"
 		 * names in the namespace.
 		 */
-		if (!acpi_ut_valid_acpi_char(name[i], i)) {
+		name[i] = '*';
-			new_name[i] = '*';
+		found_bad_char = TRUE;
-		}
 	}
 
-	return (*(u32 *) new_name);
+	if (found_bad_char) {
+
+		/* Report warning only if in strict mode or debug mode */
+
+		if (!acpi_gbl_enable_interpreter_slack) {
+			ACPI_WARNING((AE_INFO,
+				      "Found bad character(s) in name, repaired: [%4.4s]\n",
+				      name));
+		} else {
+			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+					  "Found bad character(s) in name, repaired: [%4.4s]\n",
+					  name));
+		}
+	}
 }
 
 /*******************************************************************************
@@ -681,7 +776,7 @@ acpi_name acpi_ut_repair_name(char *name)
  *
  ******************************************************************************/
 
-acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer)
+acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
 {
 	u32 this_digit = 0;
 	u64 return_value = 0;
@@ -754,14 +849,14 @@ acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer)
 
 			/* Convert ASCII 0-9 to Decimal value */
 
-			this_digit = ((u8) * string) - '0';
+			this_digit = ((u8)*string) - '0';
 		} else if (base == 10) {
 
 			/* Digit is out of range; possible in to_integer case only */
 
 			term = 1;
 		} else {
-			this_digit = (u8) ACPI_TOUPPER(*string);
+			this_digit = (u8)ACPI_TOUPPER(*string);
 			if (ACPI_IS_XDIGIT((char)this_digit)) {
 
 				/* Convert ASCII Hex char to value */
@@ -788,7 +883,8 @@ acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer)
 
 		valid_digits++;
 
-		if (sign_of0x && ((valid_digits > 16)
+		if (sign_of0x
+		    && ((valid_digits > 16)
 			|| ((valid_digits > 8) && mode32))) {
 			/*
 			 * This is to_integer operation case.
@@ -800,7 +896,7 @@ acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer)
 
 		/* Divide the digit into the correct position */
 
-		(void)acpi_ut_short_divide((dividend - (u64) this_digit),
+		(void)acpi_ut_short_divide((dividend - (u64)this_digit),
 					   base, &quotient, NULL);
 
 		if (return_value > quotient) {
@@ -890,7 +986,7 @@ acpi_ut_create_update_state_and_push(union acpi_operand_object *object,
  ******************************************************************************/
 
 acpi_status
-acpi_ut_walk_package_tree(union acpi_operand_object * source_object,
+acpi_ut_walk_package_tree(union acpi_operand_object *source_object,
 			  void *target_object,
 			  acpi_pkg_callback walk_callback, void *context)
 {

drivers/acpi/acpica/utmutex.c

@@ -193,6 +193,8 @@ static void acpi_ut_delete_mutex(acpi_mutex_handle mutex_id)
 
 	acpi_gbl_mutex_info[mutex_id].mutex = NULL;
 	acpi_gbl_mutex_info[mutex_id].thread_id = ACPI_MUTEX_NOT_ACQUIRED;
+
+	return_VOID;
 }
 
 /*******************************************************************************

drivers/acpi/acpica/uttrack.c

@@ -0,0 +1,692 @@
+/******************************************************************************
+ *
+ * Module Name: uttrack - Memory allocation tracking routines (debug only)
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+/*
+ * These procedures are used for tracking memory leaks in the subsystem, and
+ * they get compiled out when the ACPI_DBG_TRACK_ALLOCATIONS is not set.
+ *
+ * Each memory allocation is tracked via a doubly linked list. Each
+ * element contains the caller's component, module name, function name, and
+ * line number. acpi_ut_allocate and acpi_ut_allocate_zeroed call
+ * acpi_ut_track_allocation to add an element to the list; deletion
+ * occurs in the body of acpi_ut_free.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+
+#define _COMPONENT          ACPI_UTILITIES
+ACPI_MODULE_NAME("uttrack")
+
+/* Local prototypes */
+static struct acpi_debug_mem_block *acpi_ut_find_allocation(struct
+							    acpi_debug_mem_block
+							    *allocation);
+
+static acpi_status
+acpi_ut_track_allocation(struct acpi_debug_mem_block *address,
+			 acpi_size size,
+			 u8 alloc_type,
+			 u32 component, const char *module, u32 line);
+
+static acpi_status
+acpi_ut_remove_allocation(struct acpi_debug_mem_block *address,
+			  u32 component, const char *module, u32 line);
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_create_list
+ *
+ * PARAMETERS:  cache_name      - Ascii name for the cache
+ *              object_size     - Size of each cached object
+ *              return_cache    - Where the new cache object is returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Create a local memory list for tracking purposed
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ut_create_list(char *list_name,
+		    u16 object_size, struct acpi_memory_list **return_cache)
+{
+	struct acpi_memory_list *cache;
+
+	cache = acpi_os_allocate(sizeof(struct acpi_memory_list));
+	if (!cache) {
+		return (AE_NO_MEMORY);
+	}
+
+	ACPI_MEMSET(cache, 0, sizeof(struct acpi_memory_list));
+
+	cache->list_name = list_name;
+	cache->object_size = object_size;
+
+	*return_cache = cache;
+	return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_allocate_and_track
+ *
+ * PARAMETERS:  size                - Size of the allocation
+ *              component           - Component type of caller
+ *              module              - Source file name of caller
+ *              line                - Line number of caller
+ *
+ * RETURN:      Address of the allocated memory on success, NULL on failure.
+ *
+ * DESCRIPTION: The subsystem's equivalent of malloc.
+ *
+ ******************************************************************************/
+
+void *acpi_ut_allocate_and_track(acpi_size size,
+				 u32 component, const char *module, u32 line)
+{
+	struct acpi_debug_mem_block *allocation;
+	acpi_status status;
+
+	allocation =
+	    acpi_ut_allocate(size + sizeof(struct acpi_debug_mem_header),
+			     component, module, line);
+	if (!allocation) {
+		return (NULL);
+	}
+
+	status = acpi_ut_track_allocation(allocation, size,
+					  ACPI_MEM_MALLOC, component, module,
+					  line);
+	if (ACPI_FAILURE(status)) {
+		acpi_os_free(allocation);
+		return (NULL);
+	}
+
+	acpi_gbl_global_list->total_allocated++;
+	acpi_gbl_global_list->total_size += (u32)size;
+	acpi_gbl_global_list->current_total_size += (u32)size;
+	if (acpi_gbl_global_list->current_total_size >
+	    acpi_gbl_global_list->max_occupied) {
+		acpi_gbl_global_list->max_occupied =
+		    acpi_gbl_global_list->current_total_size;
+	}
+
+	return ((void *)&allocation->user_space);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_allocate_zeroed_and_track
+ *
+ * PARAMETERS:  size                - Size of the allocation
+ *              component           - Component type of caller
+ *              module              - Source file name of caller
+ *              line                - Line number of caller
+ *
+ * RETURN:      Address of the allocated memory on success, NULL on failure.
+ *
+ * DESCRIPTION: Subsystem equivalent of calloc.
+ *
+ ******************************************************************************/
+
+void *acpi_ut_allocate_zeroed_and_track(acpi_size size,
+					u32 component,
+					const char *module, u32 line)
+{
+	struct acpi_debug_mem_block *allocation;
+	acpi_status status;
+
+	allocation =
+	    acpi_ut_allocate_zeroed(size + sizeof(struct acpi_debug_mem_header),
+				    component, module, line);
+	if (!allocation) {
+
+		/* Report allocation error */
+
+		ACPI_ERROR((module, line,
+			    "Could not allocate size %u", (u32)size));
+		return (NULL);
+	}
+
+	status = acpi_ut_track_allocation(allocation, size,
+					  ACPI_MEM_CALLOC, component, module,
+					  line);
+	if (ACPI_FAILURE(status)) {
+		acpi_os_free(allocation);
+		return (NULL);
+	}
+
+	acpi_gbl_global_list->total_allocated++;
+	acpi_gbl_global_list->total_size += (u32)size;
+	acpi_gbl_global_list->current_total_size += (u32)size;
+	if (acpi_gbl_global_list->current_total_size >
+	    acpi_gbl_global_list->max_occupied) {
+		acpi_gbl_global_list->max_occupied =
+		    acpi_gbl_global_list->current_total_size;
+	}
+
+	return ((void *)&allocation->user_space);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_free_and_track
+ *
+ * PARAMETERS:  allocation          - Address of the memory to deallocate
+ *              component           - Component type of caller
+ *              module              - Source file name of caller
+ *              line                - Line number of caller
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Frees the memory at Allocation
+ *
+ ******************************************************************************/
+
+void
+acpi_ut_free_and_track(void *allocation,
+		       u32 component, const char *module, u32 line)
+{
+	struct acpi_debug_mem_block *debug_block;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE_PTR(ut_free, allocation);
+
+	if (NULL == allocation) {
+		ACPI_ERROR((module, line, "Attempt to delete a NULL address"));
+
+		return_VOID;
+	}
+
+	debug_block = ACPI_CAST_PTR(struct acpi_debug_mem_block,
+				    (((char *)allocation) -
+				     sizeof(struct acpi_debug_mem_header)));
+
+	acpi_gbl_global_list->total_freed++;
+	acpi_gbl_global_list->current_total_size -= debug_block->size;
+
+	status = acpi_ut_remove_allocation(debug_block,
+					   component, module, line);
+	if (ACPI_FAILURE(status)) {
+		ACPI_EXCEPTION((AE_INFO, status, "Could not free memory"));
+	}
+
+	acpi_os_free(debug_block);
+	ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "%p freed\n", allocation));
+	return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_find_allocation
+ *
+ * PARAMETERS:  allocation              - Address of allocated memory
+ *
+ * RETURN:      Three cases:
+ *              1) List is empty, NULL is returned.
+ *              2) Element was found. Returns Allocation parameter.
+ *              3) Element was not found. Returns position where it should be
+ *                  inserted into the list.
+ *
+ * DESCRIPTION: Searches for an element in the global allocation tracking list.
+ *              If the element is not found, returns the location within the
+ *              list where the element should be inserted.
+ *
+ *              Note: The list is ordered by larger-to-smaller addresses.
+ *
+ *              This global list is used to detect memory leaks in ACPICA as
+ *              well as other issues such as an attempt to release the same
+ *              internal object more than once. Although expensive as far
+ *              as cpu time, this list is much more helpful for finding these
+ *              types of issues than using memory leak detectors outside of
+ *              the ACPICA code.
+ *
+ ******************************************************************************/
+
+static struct acpi_debug_mem_block *acpi_ut_find_allocation(struct
+							    acpi_debug_mem_block
+							    *allocation)
+{
+	struct acpi_debug_mem_block *element;
+
+	element = acpi_gbl_global_list->list_head;
+	if (!element) {
+		return (NULL);
+	}
+
+	/*
+	 * Search for the address.
+	 *
+	 * Note: List is ordered by larger-to-smaller addresses, on the
+	 * assumption that a new allocation usually has a larger address
+	 * than previous allocations.
+	 */
+	while (element > allocation) {
+
+		/* Check for end-of-list */
+
+		if (!element->next) {
+			return (element);
+		}
+
+		element = element->next;
+	}
+
+	if (element == allocation) {
+		return (element);
+	}
+
+	return (element->previous);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_track_allocation
+ *
+ * PARAMETERS:  allocation          - Address of allocated memory
+ *              size                - Size of the allocation
+ *              alloc_type          - MEM_MALLOC or MEM_CALLOC
+ *              component           - Component type of caller
+ *              module              - Source file name of caller
+ *              line                - Line number of caller
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Inserts an element into the global allocation tracking list.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ut_track_allocation(struct acpi_debug_mem_block *allocation,
+			 acpi_size size,
+			 u8 alloc_type,
+			 u32 component, const char *module, u32 line)
+{
+	struct acpi_memory_list *mem_list;
+	struct acpi_debug_mem_block *element;
+	acpi_status status = AE_OK;
+
+	ACPI_FUNCTION_TRACE_PTR(ut_track_allocation, allocation);
+
+	if (acpi_gbl_disable_mem_tracking) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	mem_list = acpi_gbl_global_list;
+	status = acpi_ut_acquire_mutex(ACPI_MTX_MEMORY);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/*
+	 * Search the global list for this address to make sure it is not
+	 * already present. This will catch several kinds of problems.
+	 */
+	element = acpi_ut_find_allocation(allocation);
+	if (element == allocation) {
+		ACPI_ERROR((AE_INFO,
+			    "UtTrackAllocation: Allocation (%p) already present in global list!",
+			    allocation));
+		goto unlock_and_exit;
+	}
+
+	/* Fill in the instance data */
+
+	allocation->size = (u32)size;
+	allocation->alloc_type = alloc_type;
+	allocation->component = component;
+	allocation->line = line;
+
+	ACPI_STRNCPY(allocation->module, module, ACPI_MAX_MODULE_NAME);
+	allocation->module[ACPI_MAX_MODULE_NAME - 1] = 0;
+
+	if (!element) {
+
+		/* Insert at list head */
+
+		if (mem_list->list_head) {
+			((struct acpi_debug_mem_block *)(mem_list->list_head))->
+			    previous = allocation;
+		}
+
+		allocation->next = mem_list->list_head;
+		allocation->previous = NULL;
+
+		mem_list->list_head = allocation;
+	} else {
+		/* Insert after element */
+
+		allocation->next = element->next;
+		allocation->previous = element;
+
+		if (element->next) {
+			(element->next)->previous = allocation;
+		}
+
+		element->next = allocation;
+	}
+
+      unlock_and_exit:
+	status = acpi_ut_release_mutex(ACPI_MTX_MEMORY);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_remove_allocation
+ *
+ * PARAMETERS:  allocation          - Address of allocated memory
+ *              component           - Component type of caller
+ *              module              - Source file name of caller
+ *              line                - Line number of caller
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Deletes an element from the global allocation tracking list.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ut_remove_allocation(struct acpi_debug_mem_block *allocation,
+			  u32 component, const char *module, u32 line)
+{
+	struct acpi_memory_list *mem_list;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE(ut_remove_allocation);
+
+	if (acpi_gbl_disable_mem_tracking) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	mem_list = acpi_gbl_global_list;
+	if (NULL == mem_list->list_head) {
+
+		/* No allocations! */
+
+		ACPI_ERROR((module, line,
+			    "Empty allocation list, nothing to free!"));
+
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	status = acpi_ut_acquire_mutex(ACPI_MTX_MEMORY);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* Unlink */
+
+	if (allocation->previous) {
+		(allocation->previous)->next = allocation->next;
+	} else {
+		mem_list->list_head = allocation->next;
+	}
+
+	if (allocation->next) {
+		(allocation->next)->previous = allocation->previous;
+	}
+
+	/* Mark the segment as deleted */
+
+	ACPI_MEMSET(&allocation->user_space, 0xEA, allocation->size);
+
+	ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "Freeing size 0%X\n",
+			  allocation->size));
+
+	status = acpi_ut_release_mutex(ACPI_MTX_MEMORY);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_dump_allocation_info
+ *
+ * PARAMETERS:  None
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Print some info about the outstanding allocations.
+ *
+ ******************************************************************************/
+
+void acpi_ut_dump_allocation_info(void)
+{
+/*
+	struct acpi_memory_list         *mem_list;
+*/
+
+	ACPI_FUNCTION_TRACE(ut_dump_allocation_info);
+
+/*
+	ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+			  ("%30s: %4d (%3d Kb)\n", "Current allocations",
+			  mem_list->current_count,
+			  ROUND_UP_TO_1K (mem_list->current_size)));
+
+	ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+			  ("%30s: %4d (%3d Kb)\n", "Max concurrent allocations",
+			  mem_list->max_concurrent_count,
+			  ROUND_UP_TO_1K (mem_list->max_concurrent_size)));
+
+	ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+			  ("%30s: %4d (%3d Kb)\n", "Total (all) internal objects",
+			  running_object_count,
+			  ROUND_UP_TO_1K (running_object_size)));
+
+	ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+			  ("%30s: %4d (%3d Kb)\n", "Total (all) allocations",
+			  running_alloc_count,
+			  ROUND_UP_TO_1K (running_alloc_size)));
+
+	ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+			  ("%30s: %4d (%3d Kb)\n", "Current Nodes",
+			  acpi_gbl_current_node_count,
+			  ROUND_UP_TO_1K (acpi_gbl_current_node_size)));
+
+	ACPI_DEBUG_PRINT (TRACE_ALLOCATIONS | TRACE_TABLES,
+			  ("%30s: %4d (%3d Kb)\n", "Max Nodes",
+			  acpi_gbl_max_concurrent_node_count,
+			  ROUND_UP_TO_1K ((acpi_gbl_max_concurrent_node_count *
+					 sizeof (struct acpi_namespace_node)))));
+*/
+	return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_dump_allocations
+ *
+ * PARAMETERS:  component           - Component(s) to dump info for.
+ *              module              - Module to dump info for. NULL means all.
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Print a list of all outstanding allocations.
+ *
+ ******************************************************************************/
+
+void acpi_ut_dump_allocations(u32 component, const char *module)
+{
+	struct acpi_debug_mem_block *element;
+	union acpi_descriptor *descriptor;
+	u32 num_outstanding = 0;
+	u8 descriptor_type;
+
+	ACPI_FUNCTION_TRACE(ut_dump_allocations);
+
+	if (acpi_gbl_disable_mem_tracking) {
+		return_VOID;
+	}
+
+	/*
+	 * Walk the allocation list.
+	 */
+	if (ACPI_FAILURE(acpi_ut_acquire_mutex(ACPI_MTX_MEMORY))) {
+		return_VOID;
+	}
+
+	element = acpi_gbl_global_list->list_head;
+	while (element) {
+		if ((element->component & component) &&
+		    ((module == NULL)
+		     || (0 == ACPI_STRCMP(module, element->module)))) {
+			descriptor =
+			    ACPI_CAST_PTR(union acpi_descriptor,
+					  &element->user_space);
+
+			if (element->size <
+			    sizeof(struct acpi_common_descriptor)) {
+				acpi_os_printf("%p Length 0x%04X %9.9s-%u "
+					       "[Not a Descriptor - too small]\n",
+					       descriptor, element->size,
+					       element->module, element->line);
+			} else {
+				/* Ignore allocated objects that are in a cache */
+
+				if (ACPI_GET_DESCRIPTOR_TYPE(descriptor) !=
+				    ACPI_DESC_TYPE_CACHED) {
+					acpi_os_printf
+					    ("%p Length 0x%04X %9.9s-%u [%s] ",
+					     descriptor, element->size,
+					     element->module, element->line,
+					     acpi_ut_get_descriptor_name
+					     (descriptor));
+
+					/* Validate the descriptor type using Type field and length */
+
+					descriptor_type = 0;	/* Not a valid descriptor type */
+
+					switch (ACPI_GET_DESCRIPTOR_TYPE
+						(descriptor)) {
+					case ACPI_DESC_TYPE_OPERAND:
+						if (element->size ==
+						    sizeof(union
+							   acpi_operand_object))
+						{
+							descriptor_type =
+							    ACPI_DESC_TYPE_OPERAND;
+						}
+						break;
+
+					case ACPI_DESC_TYPE_PARSER:
+						if (element->size ==
+						    sizeof(union
+							   acpi_parse_object)) {
+							descriptor_type =
+							    ACPI_DESC_TYPE_PARSER;
+						}
+						break;
+
+					case ACPI_DESC_TYPE_NAMED:
+						if (element->size ==
+						    sizeof(struct
+							   acpi_namespace_node))
+						{
+							descriptor_type =
+							    ACPI_DESC_TYPE_NAMED;
+						}
+						break;
+
+					default:
+						break;
+					}
+
+					/* Display additional info for the major descriptor types */
+
+					switch (descriptor_type) {
+					case ACPI_DESC_TYPE_OPERAND:
+						acpi_os_printf
+						    ("%12.12s RefCount 0x%04X\n",
+						     acpi_ut_get_type_name
+						     (descriptor->object.common.
+						      type),
+						     descriptor->object.common.
+						     reference_count);
+						break;
+
+					case ACPI_DESC_TYPE_PARSER:
+						acpi_os_printf
+						    ("AmlOpcode 0x%04hX\n",
+						     descriptor->op.asl.
+						     aml_opcode);
+						break;
+
+					case ACPI_DESC_TYPE_NAMED:
+						acpi_os_printf("%4.4s\n",
+							       acpi_ut_get_node_name
+							       (&descriptor->
+								node));
+						break;
+
+					default:
+						acpi_os_printf("\n");
+						break;
+					}
+				}
+			}
+
+			num_outstanding++;
+		}
+
+		element = element->next;
+	}
+
+	(void)acpi_ut_release_mutex(ACPI_MTX_MEMORY);
+
+	/* Print summary */
+
+	if (!num_outstanding) {
+		ACPI_INFO((AE_INFO, "No outstanding allocations"));
+	} else {
+		ACPI_ERROR((AE_INFO, "%u(0x%X) Outstanding allocations",
+			    num_outstanding, num_outstanding));
+	}
+
+	return_VOID;
+}
+
+#endif				/* ACPI_DBG_TRACK_ALLOCATIONS */

drivers/acpi/acpica/utxface.c

@@ -238,7 +238,7 @@ acpi_install_initialization_handler(acpi_init_handler handler, u32 function)
 	}
 
 	acpi_gbl_init_handler = handler;
-	return AE_OK;
+	return (AE_OK);
 }
 
 ACPI_EXPORT_SYMBOL(acpi_install_initialization_handler)
@@ -263,6 +263,7 @@ acpi_status acpi_purge_cached_objects(void)
 	(void)acpi_os_purge_cache(acpi_gbl_operand_cache);
 	(void)acpi_os_purge_cache(acpi_gbl_ps_node_cache);
 	(void)acpi_os_purge_cache(acpi_gbl_ps_node_ext_cache);
+
 	return_ACPI_STATUS(AE_OK);
 }
 

drivers/acpi/acpica/utxferror.c

@@ -408,7 +408,7 @@ acpi_ut_namespace_error(const char *module_name,
 
 		ACPI_MOVE_32_TO_32(&bad_name,
 				   ACPI_CAST_PTR(u32, internal_name));
-		acpi_os_printf("[0x%4.4X] (NON-ASCII)", bad_name);
+		acpi_os_printf("[0x%.8X] (NON-ASCII)", bad_name);
 	} else {
 		/* Convert path to external format */
 

drivers/acpi/apei/ghes.c

@@ -994,7 +994,7 @@ err:
 	return rc;
 }
 
-static int __devexit ghes_remove(struct platform_device *ghes_dev)
+static int ghes_remove(struct platform_device *ghes_dev)
 {
 	struct ghes *ghes;
 	struct acpi_hest_generic *generic;

drivers/acpi/battery.c

@@ -34,6 +34,7 @@
 #include <linux/dmi.h>
 #include <linux/slab.h>
 #include <linux/suspend.h>
+#include <asm/unaligned.h>
 
 #ifdef CONFIG_ACPI_PROCFS_POWER
 #include <linux/proc_fs.h>
@@ -95,6 +96,18 @@ enum {
 	ACPI_BATTERY_ALARM_PRESENT,
 	ACPI_BATTERY_XINFO_PRESENT,
 	ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY,
+	/* On Lenovo Thinkpad models from 2010 and 2011, the power unit
+	   switches between mWh and mAh depending on whether the system
+	   is running on battery or not.  When mAh is the unit, most
+	   reported values are incorrect and need to be adjusted by
+	   10000/design_voltage.  Verified on x201, t410, t410s, and x220.
+	   Pre-2010 and 2012 models appear to always report in mWh and
+	   are thus unaffected (tested with t42, t61, t500, x200, x300,
+	   and x230).  Also, in mid-2012 Lenovo issued a BIOS update for
+	   the 2011 models that fixes the issue (tested on x220 with a
+	   post-1.29 BIOS), but as of Nov. 2012, no such update is
+	   available for the 2010 models.  */
+	ACPI_BATTERY_QUIRK_THINKPAD_MAH,
 };
 
 struct acpi_battery {
@@ -438,6 +451,21 @@ static int acpi_battery_get_info(struct acpi_battery *battery)
 	kfree(buffer.pointer);
 	if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags))
 		battery->full_charge_capacity = battery->design_capacity;
+	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) &&
+	    battery->power_unit && battery->design_voltage) {
+		battery->design_capacity = battery->design_capacity *
+		    10000 / battery->design_voltage;
+		battery->full_charge_capacity = battery->full_charge_capacity *
+		    10000 / battery->design_voltage;
+		battery->design_capacity_warning =
+		    battery->design_capacity_warning *
+		    10000 / battery->design_voltage;
+		/* Curiously, design_capacity_low, unlike the rest of them,
+		   is correct.  */
+		/* capacity_granularity_* equal 1 on the systems tested, so
+		   it's impossible to tell if they would need an adjustment
+		   or not if their values were higher.  */
+	}
 	return result;
 }
 
@@ -486,6 +514,11 @@ static int acpi_battery_get_state(struct acpi_battery *battery)
 	    && battery->capacity_now >= 0 && battery->capacity_now <= 100)
 		battery->capacity_now = (battery->capacity_now *
 				battery->full_charge_capacity) / 100;
+	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) &&
+	    battery->power_unit && battery->design_voltage) {
+		battery->capacity_now = battery->capacity_now *
+		    10000 / battery->design_voltage;
+	}
 	return result;
 }
 
@@ -595,6 +628,24 @@ static void sysfs_remove_battery(struct acpi_battery *battery)
 	mutex_unlock(&battery->sysfs_lock);
 }
 
+static void find_battery(const struct dmi_header *dm, void *private)
+{
+	struct acpi_battery *battery = (struct acpi_battery *)private;
+	/* Note: the hardcoded offsets below have been extracted from
+	   the source code of dmidecode.  */
+	if (dm->type == DMI_ENTRY_PORTABLE_BATTERY && dm->length >= 8) {
+		const u8 *dmi_data = (const u8 *)(dm + 1);
+		int dmi_capacity = get_unaligned((const u16 *)(dmi_data + 6));
+		if (dm->length >= 18)
+			dmi_capacity *= dmi_data[17];
+		if (battery->design_capacity * battery->design_voltage / 1000
+		    != dmi_capacity &&
+		    battery->design_capacity * 10 == dmi_capacity)
+			set_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH,
+				&battery->flags);
+	}
+}
+
 /*
  * According to the ACPI spec, some kinds of primary batteries can
  * report percentage battery remaining capacity directly to OS.
@@ -620,6 +671,32 @@ static void acpi_battery_quirks(struct acpi_battery *battery)
 		battery->capacity_now = (battery->capacity_now *
 				battery->full_charge_capacity) / 100;
 	}
+
+	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags))
+		return ;
+
+	if (battery->power_unit && dmi_name_in_vendors("LENOVO")) {
+		const char *s;
+		s = dmi_get_system_info(DMI_PRODUCT_VERSION);
+		if (s && !strnicmp(s, "ThinkPad", 8)) {
+			dmi_walk(find_battery, battery);
+			if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH,
+				     &battery->flags) &&
+			    battery->design_voltage) {
+				battery->design_capacity =
+				    battery->design_capacity *
+				    10000 / battery->design_voltage;
+				battery->full_charge_capacity =
+				    battery->full_charge_capacity *
+				    10000 / battery->design_voltage;
+				battery->design_capacity_warning =
+				    battery->design_capacity_warning *
+				    10000 / battery->design_voltage;
+				battery->capacity_now = battery->capacity_now *
+				    10000 / battery->design_voltage;
+			}
+		}
+	}
 }
 
 static int acpi_battery_update(struct acpi_battery *battery)