linux-bl808/arch/arm/mach-omap2/pdata-quirks.c
Olof Johansson a6dcb26264 Second set of omap device tree changes for v4.5 merge window. This series
updates the EDMA bindings based on the various fixes to split EDMA into
 separate independent devices. It also adds support for more devices on the
 CompuLab cm-t335 and LogicPD Torpedo boards, and enables the new bindings
 for qspi for am437x and dra7. There are also few dra7 regulator fixes, and
 change of gpoi-key,wakeup to wakeup-source.
 
 These depend on commit ae0add740c ("dmaengine: edma: DT: Change reserved
 slot array from 16bit to 32bit type") already merged into mainline.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWeGeiAAoJEBvUPslcq6VzreMQAJD+jmhslEeY5vhdHiu8qiV8
 7DVb16H0grLVlUe1D+sCztOUqwtZWb8e2iHG6C+rwbnq01L4/LXVDu1USQ1wq5yN
 cgRyYu02UOWPPsUHADUSV4hao9lihhIG8X4+K/dFpp3Pa8V/VbAJ+lgFJ7el2gYd
 qNjl2f6fO4yQE6Zr5MfhYZQaaYTIdxxFeU2evgTBsEz6hnrpUJ04VQYE7jffoP0t
 n8xh6cGRvHTH7MGthgyQJ0QmW3e0Cl09aoHhyT2PzQ+rxgotpEdDxD+V1R4rN7x9
 yj2MoZAlQnHhbBRRMRHnvTwbw/ad1gHYGTroxAjAHzCDXGHJWXukRhVusRvwqqIN
 OOlMOVtlu/Lkw+jXAZ8JaW+OBeuX7mVAGZMCVQsdrdyQSjujr3H/bdU6GsBYKAFC
 vxXFjI8/R6w9ekhan0KCVTvvW/89uni/BSiRhYQWES2PQYQdtW2hIlKFJZfbfvS0
 71qj4dpv+Yii6P9MfsCwXjaUOnQ9HBFHvI2SG4gB7rn9va0mjfqhAWV32eDYXBdI
 I2GLZvnowifT1ALHTu01768yy4iFn1ngAtC53XW4L3+PWnNq0f8kPv2PXXaa4W5e
 fIzBdzY/NXOjLR/Lt56Qer6s5MGhpdJvvcOQCmAxXYheuwwMNzdMUgex04tHz0Xh
 B5KsQaXR3PLR+QA5WISI
 =+G24
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.5/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Second set of omap device tree changes for v4.5 merge window. This series
updates the EDMA bindings based on the various fixes to split EDMA into
separate independent devices. It also adds support for more devices on the
CompuLab cm-t335 and LogicPD Torpedo boards, and enables the new bindings
for qspi for am437x and dra7. There are also few dra7 regulator fixes, and
change of gpoi-key,wakeup to wakeup-source.

These depend on commit ae0add740c ("dmaengine: edma: DT: Change reserved
slot array from 16bit to 32bit type") already merged into mainline.

* tag 'omap-for-v4.5/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: LogicPD Torpedo: Add Touchscreen Support
  ARM: dts: DRA7-EVM: Add regulator-allow-bypass property for ldo9
  ARM: dts: DRA72-EVM: Add regulator-allow-bypass property for ldo1 and ldo2
  ARM: dts: AM4372: add entry for qspi mmap region
  ARM: dts: DRA7: add entry for qspi mmap region
  ARM: OMAP2+: LogicPD Torpedo: Revert Duplicative Entries
  ARM: OMAP2+: LogicPD Torpedo + Wireless: Add Bluetooth
  ARM: OMAP2+: LogicPD Torpedo: Add LCD Type 15 Support
  ARM: dts: cm-t335: add support for bluetooth
  ARM: dts: cm-t335: add support for DVI/LCD
  ARM: dts: cm-t335: add support for I2C GPIO expander
  ARM: dts: cm-t335: add support for SBC-T335
  ARM: dts: cm-t335: add support for USB0
  ARM: dts: omap: replace legacy *,wakeup property with wakeup-source
  ARM: dts: am335x: replace gpio-key,wakeup with wakeup-source property
  ARM: DTS: am437x: Use the new DT bindings for the eDMA3
  ARM: DTS: am33xx: Use the new DT bindings for the eDMA3
  dmaengine: edma: DT: Change reserved slot array from 16bit to 32bit type
  dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit type

Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22 14:55:02 -08:00

567 lines
15 KiB
C

/*
* Legacy platform_data quirks
*
* Copyright (C) 2013 Texas Instruments
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/davinci_emac.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/ti_wilink_st.h>
#include <linux/wl12xx.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/platform_data/pinctrl-single.h>
#include <linux/platform_data/iommu-omap.h>
#include <linux/platform_data/wkup_m3.h>
#include "common.h"
#include "common-board-devices.h"
#include "dss-common.h"
#include "control.h"
#include "omap_device.h"
#include "omap-secure.h"
#include "soc.h"
#include "hsmmc.h"
struct pdata_init {
const char *compatible;
void (*fn)(void);
};
static struct of_dev_auxdata omap_auxdata_lookup[];
static struct twl4030_gpio_platform_data twl_gpio_auxdata;
#ifdef CONFIG_MACH_NOKIA_N8X0
static void __init omap2420_n8x0_legacy_init(void)
{
omap_auxdata_lookup[0].platform_data = n8x0_legacy_init();
}
#else
#define omap2420_n8x0_legacy_init NULL
#endif
#ifdef CONFIG_ARCH_OMAP3
/*
* Configures GPIOs 126, 127 and 129 to 1.8V mode instead of 3.0V
* mode for MMC1 in case bootloader did not configure things.
* Note that if the pins are used for MMC1, pbias-regulator
* manages the IO voltage.
*/
static void __init omap3_gpio126_127_129(void)
{
u32 reg;
reg = omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
reg &= ~OMAP343X_PBIASLITEVMODE1;
reg |= OMAP343X_PBIASLITEPWRDNZ1;
omap_ctrl_writel(reg, OMAP343X_CONTROL_PBIAS_LITE);
if (cpu_is_omap3630()) {
reg = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
reg |= OMAP36XX_GPIO_IO_PWRDNZ;
omap_ctrl_writel(reg, OMAP34XX_CONTROL_WKUP_CTRL);
}
}
static void __init hsmmc2_internal_input_clk(void)
{
u32 reg;
reg = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1);
}
static struct iommu_platform_data omap3_iommu_pdata = {
.reset_name = "mmu",
.assert_reset = omap_device_assert_hardreset,
.deassert_reset = omap_device_deassert_hardreset,
};
static int omap3_sbc_t3730_twl_callback(struct device *dev,
unsigned gpio,
unsigned ngpio)
{
int res;
res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
"wlan pwr");
if (res)
return res;
gpio_export(gpio, 0);
return 0;
}
static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
{
int err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, hub_name);
if (err) {
pr_err("SBC-T3x: %s reset gpio request failed: %d\n",
hub_name, err);
return;
}
gpio_export(gpio, 0);
udelay(10);
gpio_set_value(gpio, 1);
msleep(1);
}
static void __init omap3_sbc_t3730_twl_init(void)
{
twl_gpio_auxdata.setup = omap3_sbc_t3730_twl_callback;
}
static void __init omap3_sbc_t3730_legacy_init(void)
{
omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
}
static void __init omap3_sbc_t3530_legacy_init(void)
{
omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
}
static struct ti_st_plat_data wilink_pdata = {
.nshutdown_gpio = 137,
.dev_name = "/dev/ttyO1",
.flow_cntrl = 1,
.baud_rate = 300000,
};
static struct platform_device wl18xx_device = {
.name = "kim",
.id = -1,
.dev = {
.platform_data = &wilink_pdata,
}
};
static struct ti_st_plat_data wilink7_pdata = {
.nshutdown_gpio = 162,
.dev_name = "/dev/ttyO1",
.flow_cntrl = 1,
.baud_rate = 300000,
};
static struct platform_device wl128x_device = {
.name = "kim",
.id = -1,
.dev = {
.platform_data = &wilink7_pdata,
}
};
static struct platform_device btwilink_device = {
.name = "btwilink",
.id = -1,
};
static void __init omap3_igep0020_rev_f_legacy_init(void)
{
platform_device_register(&wl18xx_device);
platform_device_register(&btwilink_device);
}
static void __init omap3_igep0030_rev_g_legacy_init(void)
{
platform_device_register(&wl18xx_device);
platform_device_register(&btwilink_device);
}
static void __init omap3_evm_legacy_init(void)
{
hsmmc2_internal_input_clk();
}
static void am35xx_enable_emac_int(void)
{
u32 v;
v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR |
AM35XX_CPGMAC_C0_MISC_PULSE_CLR | AM35XX_CPGMAC_C0_RX_THRESH_CLR);
omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
}
static void am35xx_disable_emac_int(void)
{
u32 v;
v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR);
omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
}
static struct emac_platform_data am35xx_emac_pdata = {
.interrupt_enable = am35xx_enable_emac_int,
.interrupt_disable = am35xx_disable_emac_int,
};
static void __init am35xx_emac_reset(void)
{
u32 v;
v = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
v &= ~AM35XX_CPGMACSS_SW_RST;
omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
}
static struct gpio cm_t3517_wlan_gpios[] __initdata = {
{ 56, GPIOF_OUT_INIT_HIGH, "wlan pwr" },
{ 4, GPIOF_OUT_INIT_HIGH, "xcvr noe" },
};
static void __init omap3_sbc_t3517_wifi_init(void)
{
int err = gpio_request_array(cm_t3517_wlan_gpios,
ARRAY_SIZE(cm_t3517_wlan_gpios));
if (err) {
pr_err("SBC-T3517: wl12xx gpios request failed: %d\n", err);
return;
}
gpio_export(cm_t3517_wlan_gpios[0].gpio, 0);
gpio_export(cm_t3517_wlan_gpios[1].gpio, 0);
msleep(100);
gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0);
}
static void __init omap3_sbc_t3517_legacy_init(void)
{
omap3_sbc_t3x_usb_hub_init(152, "cm-t3517 usb hub");
omap3_sbc_t3x_usb_hub_init(98, "sb-t35 usb hub");
am35xx_emac_reset();
hsmmc2_internal_input_clk();
omap3_sbc_t3517_wifi_init();
}
static void __init am3517_evm_legacy_init(void)
{
am35xx_emac_reset();
}
static struct platform_device omap3_rom_rng_device = {
.name = "omap3-rom-rng",
.id = -1,
.dev = {
.platform_data = rx51_secure_rng_call,
},
};
static void __init nokia_n900_legacy_init(void)
{
hsmmc2_internal_input_clk();
if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
if (IS_ENABLED(CONFIG_ARM_ERRATA_430973)) {
pr_info("RX-51: Enabling ARM errata 430973 workaround\n");
/* set IBE to 1 */
rx51_secure_update_aux_cr(BIT(6), 0);
} else {
pr_warn("RX-51: Not enabling ARM errata 430973 workaround\n");
pr_warn("Thumb binaries may crash randomly without this workaround\n");
}
pr_info("RX-51: Registring OMAP3 HWRNG device\n");
platform_device_register(&omap3_rom_rng_device);
}
}
static void __init omap3_tao3530_legacy_init(void)
{
hsmmc2_internal_input_clk();
}
static void __init omap3_logicpd_torpedo_init(void)
{
omap3_gpio126_127_129();
platform_device_register(&wl128x_device);
platform_device_register(&btwilink_device);
}
/* omap3pandora legacy devices */
#define PANDORA_WIFI_IRQ_GPIO 21
#define PANDORA_WIFI_NRESET_GPIO 23
static struct platform_device pandora_backlight = {
.name = "pandora-backlight",
.id = -1,
};
static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
};
static struct regulator_init_data pandora_vmmc3 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply),
.consumer_supplies = pandora_vmmc3_supply,
};
static struct fixed_voltage_config pandora_vwlan = {
.supply_name = "vwlan",
.microvolts = 1800000, /* 1.8V */
.gpio = PANDORA_WIFI_NRESET_GPIO,
.startup_delay = 50000, /* 50ms */
.enable_high = 1,
.init_data = &pandora_vmmc3,
};
static struct platform_device pandora_vwlan_device = {
.name = "reg-fixed-voltage",
.id = 1,
.dev = {
.platform_data = &pandora_vwlan,
},
};
static void pandora_wl1251_init_card(struct mmc_card *card)
{
/*
* We have TI wl1251 attached to MMC3. Pass this information to
* SDIO core because it can't be probed by normal methods.
*/
if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
card->quirks |= MMC_QUIRK_NONSTD_SDIO;
card->cccr.wide_bus = 1;
card->cis.vendor = 0x104c;
card->cis.device = 0x9066;
card->cis.blksize = 512;
card->cis.max_dtr = 24000000;
card->ocr = 0x80;
}
}
static struct omap2_hsmmc_info pandora_mmc3[] = {
{
.mmc = 3,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.init_card = pandora_wl1251_init_card,
},
{} /* Terminator */
};
static void __init pandora_wl1251_init(void)
{
struct wl1251_platform_data pandora_wl1251_pdata;
int ret;
memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
pandora_wl1251_pdata.power_gpio = -1;
ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
if (ret < 0)
goto fail;
pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
if (pandora_wl1251_pdata.irq < 0)
goto fail_irq;
pandora_wl1251_pdata.use_eeprom = true;
ret = wl1251_set_platform_data(&pandora_wl1251_pdata);
if (ret < 0)
goto fail_irq;
return;
fail_irq:
gpio_free(PANDORA_WIFI_IRQ_GPIO);
fail:
pr_err("wl1251 board initialisation failed\n");
}
static void __init omap3_pandora_legacy_init(void)
{
platform_device_register(&pandora_backlight);
platform_device_register(&pandora_vwlan_device);
omap_hsmmc_init(pandora_mmc3);
omap_hsmmc_late_init(pandora_mmc3);
pandora_wl1251_init();
}
#endif /* CONFIG_ARCH_OMAP3 */
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
static struct iommu_platform_data omap4_iommu_pdata = {
.reset_name = "mmu_cache",
.assert_reset = omap_device_assert_hardreset,
.deassert_reset = omap_device_deassert_hardreset,
};
#endif
#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
static struct wkup_m3_platform_data wkup_m3_data = {
.reset_name = "wkup_m3",
.assert_reset = omap_device_assert_hardreset,
.deassert_reset = omap_device_deassert_hardreset,
};
#endif
#ifdef CONFIG_SOC_OMAP5
static void __init omap5_uevm_legacy_init(void)
{
}
#endif
static struct pcs_pdata pcs_pdata;
void omap_pcs_legacy_init(int irq, void (*rearm)(void))
{
pcs_pdata.irq = irq;
pcs_pdata.rearm = rearm;
}
/*
* GPIOs for TWL are initialized by the I2C bus and need custom
* handing until DSS has device tree bindings.
*/
void omap_auxdata_legacy_init(struct device *dev)
{
if (dev->platform_data)
return;
if (strcmp("twl4030-gpio", dev_name(dev)))
return;
dev->platform_data = &twl_gpio_auxdata;
}
/*
* Few boards still need auxdata populated before we populate
* the dev entries in of_platform_populate().
*/
static struct pdata_init auxdata_quirks[] __initdata = {
#ifdef CONFIG_SOC_OMAP2420
{ "nokia,n800", omap2420_n8x0_legacy_init, },
{ "nokia,n810", omap2420_n8x0_legacy_init, },
{ "nokia,n810-wimax", omap2420_n8x0_legacy_init, },
#endif
#ifdef CONFIG_ARCH_OMAP3
{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_twl_init, },
#endif
{ /* sentinel */ },
};
static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
#ifdef CONFIG_MACH_NOKIA_N8X0
OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data),
OF_DEV_AUXDATA("tlv320aic3x", 0x18, "2-0018", &n810_aic33_data),
#endif
#ifdef CONFIG_ARCH_OMAP3
OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap3-padconf", 0x480025a0, "480025a0.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
&omap3_iommu_pdata),
/* Only on am3517 */
OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
&am35xx_emac_pdata),
#endif
#ifdef CONFIG_SOC_AM33XX
OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
&wkup_m3_data),
#endif
#ifdef CONFIG_ARCH_OMAP4
OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
#endif
#ifdef CONFIG_SOC_OMAP5
OF_DEV_AUXDATA("ti,omap5-padconf", 0x4a002840, "4a002840.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap5-padconf", 0x4ae0c840, "4ae0c840.pinmux", &pcs_pdata),
#endif
#ifdef CONFIG_SOC_DRA7XX
OF_DEV_AUXDATA("ti,dra7-padconf", 0x4a003400, "4a003400.pinmux", &pcs_pdata),
#endif
#ifdef CONFIG_SOC_AM43XX
OF_DEV_AUXDATA("ti,am437-padconf", 0x44e10800, "44e10800.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
&wkup_m3_data),
#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
&omap4_iommu_pdata),
OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu",
&omap4_iommu_pdata),
#endif
{ /* sentinel */ },
};
/*
* Few boards still need to initialize some legacy devices with
* platform data until the drivers support device tree.
*/
static struct pdata_init pdata_quirks[] __initdata = {
#ifdef CONFIG_ARCH_OMAP3
{ "compulab,omap3-sbc-t3517", omap3_sbc_t3517_legacy_init, },
{ "compulab,omap3-sbc-t3530", omap3_sbc_t3530_legacy_init, },
{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, },
{ "nokia,omap3-n900", nokia_n900_legacy_init, },
{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
{ "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
{ "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
{ "logicpd,dm3730-torpedo-devkit", omap3_logicpd_torpedo_init, },
{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
{ "ti,am3517-evm", am3517_evm_legacy_init, },
{ "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
{ "openpandora,omap3-pandora-600mhz", omap3_pandora_legacy_init, },
{ "openpandora,omap3-pandora-1ghz", omap3_pandora_legacy_init, },
#endif
#ifdef CONFIG_SOC_OMAP5
{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
#endif
{ /* sentinel */ },
};
static void pdata_quirks_check(struct pdata_init *quirks)
{
while (quirks->compatible) {
if (of_machine_is_compatible(quirks->compatible)) {
if (quirks->fn)
quirks->fn();
break;
}
quirks++;
}
}
void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
{
/*
* We still need this for omap2420 and omap3 PM to work, others are
* using drivers/misc/sram.c already.
*/
if (of_machine_is_compatible("ti,omap2420") ||
of_machine_is_compatible("ti,omap3"))
omap_sdrc_init(NULL, NULL);
pdata_quirks_check(auxdata_quirks);
of_platform_populate(NULL, omap_dt_match_table,
omap_auxdata_lookup, NULL);
pdata_quirks_check(pdata_quirks);
}