Ptv (#1)

* initial ptv config

* Latest Updates:

* Move Charger Driver over to TI BQ25890 driver from mainline (and backport from 6.5 release)
* Fix up BQ25890 to work with the SC89890H which is in the PtV
* Drop vendor es8316 patches and backport es8316 patches from 6.5
* Update DT file for
 - New Charger Driver, with battery and charger profiles derived from PT2
 - Fix rfkill for BT/Wifi (was using incorrect GPIO and radio-type
 - change hall sensors to emit SW_LID event
 - add simple-battery profile from PT2 (needs a audit of used params tho)
 - Fix Camera Flash Entry
 - Fix backlight off by setting PullDown Mode on Backlight GPIO
 - Start work on es8316 dt entry.
 - add speaker_amp entry to turn on/off speakers when not used
 - add audio routing and widgets based on PineBook Pro

* Update PtV kernel and new image layout specifically for PtV

conf/machine/pinetabv.conf

@@ -0,0 +1,28 @@
+#@TYPE: Machine
+#@NAME: PineTabV
+#@SOC: StarFive JH7110
+#@DESCRIPTION: Machine configuration for the PineTabV board
+
+require conf/machine/JH7110.inc
+
+EXTRA_IMAGEDEPENDS:remove = "u-boot-starfive"
+
+RISCV_SBI_FDT = "pine64_pinetabv.dtb"
+
+KERNEL_DEVICETREE = "starfive/jh7110-pine64-pinetabv.dtb"
+
+UBOOT_MACHINE = "pine64_pinetabv_defconfig"
+UBOOT_DTB_BINARY = "pine64_pinetabv.dtb"
+
+IMAGE_BOOT_FILES = " \
+    fitImage-star64-image-initramfs-pinetabv-pinetabv;${KERNEL_IMAGETYPE} \
+    uEnv.txt \
+"
+
+## wic default support
+WKS_FILE_DEPENDS = " \
+    e2fsprogs-native \
+    bmap-tools-native \
+"
+
+WKS_FILE = "pinetabv.wks"

recipes-bsp/u-boot/u-boot-starfive/uEnv-pinetabv.txt

@@ -0,0 +1,32 @@
+# This is the sample jh7110_uEnv.txt file for starfive visionfive U-boot
+# The current convention (SUBJECT TO CHANGE) is that this file
+# will be loaded from the third partition on the
+# MMC card.
+#devnum=1
+partnum=3
+
+# The FIT file to boot from
+fitfile=fitImage
+
+# for debugging boot
+bootargs_ext=if test ${devnum} = 0; then setenv bootargs "earlyprintk console=tty1 console=ttyS0,115200 rootwait earlycon=sbi root=/dev/mmcblk0p4"; else setenv bootargs "earlyprintk console=tty1 console=ttyS0,115200 rootwait earlycon=sbi root=/dev/mmcblk1p4"; fi;
+#bootargs=earlyprintk console=ttyS0,115200 debug rootwait earlycon=sbi root=/dev/mmcblk1p4
+
+# for addr info
+fileaddr=0xa0000000
+fdtaddr=0x46000000
+# boot Linux flat or compressed 'Image' stored at 'kernel_addr_r'
+kernel_addr_r=0x40200000
+irdaddr=46100000
+irdsize=5f00000
+
+# Use the FDT in the FIT image..
+setupfdt1=fdt addr ${fdtaddr}; fdt resize;
+
+setupird=setexpr irdend ${irdaddr} + ${irdsize}; fdt set /chosen linux,initrd-start <0x0 0x${irdaddr}>; fdt set /chosen linux,initrd-end <0x0 0x${irdend}>
+
+setupfdt2=fdt set /chosen bootargs "${bootargs}";
+
+bootwait=setenv _delay ${bootdelay}; echo ${_delay}; while test ${_delay} > 0; do sleep 1; setexpr _delay ${_delay} - 1; echo ${_delay}; done
+
+boot2=run bootargs_ext; mmc dev ${devnum}; fatload mmc ${devnum}:${partnum} ${fileaddr} ${fitfile}; bootm start ${fileaddr}; run setupfdt1;run setupird;run setupfdt2; bootm loados ${fileaddr}; run chipa_set_linux; run cpu_vol_set; echo "Booting kernel in"; booti ${kernel_addr_r} ${irdaddr}:${filesize} ${fdtaddr}

recipes-bsp/u-boot/u-boot-starfive_v2021.10.bb

@@ -9,6 +9,7 @@ FILESEXTRAPATHS:prepend := "${THISDIR}/files:"
 
 BRANCH:visionfive2 = "JH7110_VisionFive2_devel"
 BRANCH:star64 = "Star64"
+BRANCH:pinetabv = "Star64"
 
 SRC_URI = "git://github.com/starfive-tech/u-boot.git;protocol=https;branch=${BRANCH} \
            file://tftp-mmc-boot.txt \
@@ -16,21 +17,24 @@ SRC_URI = "git://github.com/starfive-tech/u-boot.git;protocol=https;branch=${BRA
 
 SRC_URI:star64 = "git://github.com/Fishwaldo/u-boot.git;protocol=https;branch=${BRANCH} \
            file://tftp-mmc-boot.txt \
+           file://uEnv-star64.txt \
+          "
+
+SRC_URI:pinetabv = "git://github.com/Fishwaldo/u-boot.git;protocol=https;branch=${BRANCH} \
+           file://0001-add-initial-pinetabv-config.patch \
+           file://tftp-mmc-boot.txt \
+           file://uEnv-pinetabv.txt \
           "
 
 SRC_URI:append:visionfive2 = " \
         file://uEnv-visionfive2.txt \
 "
 
-SRC_URI:append:star64 = " \
-        file://uEnv-star64.txt \
-"
-
 
 # tag VF2_v3.0.4
 SRCREV:visionfive2 = "b6e2b0e85c774a18ae668223a6e5f7d335895243"
 SRCREV:star64 = "172b47f62039605d6806fa96bd403c21cda28996"
-
+SRCREV:pinetabv = "172b47f62039605d6806fa96bd403c21cda28996"
 
 DEPENDS:append = " u-boot-tools-native"
 
@@ -59,6 +63,13 @@ do_deploy:append:star64() {
     ln -sf ${SPL_IMAGE}.normal.out ${DEPLOYDIR}/${SPL_SYMLINK}.normal.out
 }
 
+do_deploy:append:pinetabv() {
+    install -m 644 ${WORKDIR}/uEnv-pinetabv.txt ${DEPLOYDIR}/uEnv.txt
+    spl_tool -c -f ${DEPLOYDIR}/${SPL_IMAGE}
+    ln -sf ${SPL_IMAGE}.normal.out ${DEPLOYDIR}/${SPL_BINARYNAME}.normal.out
+    ln -sf ${SPL_IMAGE}.normal.out ${DEPLOYDIR}/${SPL_SYMLINK}.normal.out
+}
+
 
 COMPATIBLE_MACHINE = "jh7110"
 

recipes-kernel/linux/linux-starfive-dev.bb

@@ -10,17 +10,21 @@ SRCREV = "${AUTOREV}"
 # pin srcrev for now to have a fixed target
 # release VF2_v2.11.5
 SRCREV:visionfive2 = "d9eee31aaec51ade1641391836c1f07dd2151a4a"
-SRCREV:star64 = "765947eacb2408a3a232cbe8093bf28a991f3c35"
+SRCREV:star64 = "6463c8e29d5ccd0d9d60d5e34f320ef61e5d260d"
+SRCREV:pinetabv = "6463c8e29d5ccd0d9d60d5e34f320ef61e5d260d"
 
 BRANCH = "visionfive"
 BRANCH:visionfive2 = "JH7110_VisionFive2_devel"
 BRANCH:star64 = "Star64_devel"
+BRANCH:pinetabv = "Star64_devel"
 
 FORK ?= "starfive-tech"
 FORK:star64 ?= "Fishwaldo"
+FORK:pinetabv ?= "Fishwaldo"
 
 REPO ?= "linux"
 REPO:star64 ?= "Star64_linux"
+REPO:pinetabv ?= "Star64_linux"
 
 SRC_URI = "git://github.com/${FORK}/${REPO}.git;protocol=https;branch=${BRANCH} \
            file://modules.cfg \
@@ -39,12 +43,13 @@ SRC_URI:append:jh7110 = " \
 LINUX_VERSION ?= "6.2.0"
 LINUX_VERSION:visionfive2 = "5.15.0"
 LINUX_VERSION:star64 = "5.15.115"
+LINUX_VERSION:pinetabv = "5.15.115"
 LINUX_VERSION_EXTENSION:append:beaglev-starlight-jh7100 = "-starlight"
 
 KBUILD_DEFCONFIG:beaglev-starlight-jh7100 = "starfive_jh7100_fedora_defconfig"
 KBUILD_DEFCONFIG:visionfive = "visionfive_defconfig"
 KBUILD_DEFCONFIG:visionfive2 = "starfive_visionfive2_defconfig"
 KBUILD_DEFCONFIG:star64 = "pine64_star64_defconfig"
-
+KBUILD_DEFCONFIG:pinetabv = "pine64_pinetabv_defconfig"
 
 COMPATIBLE_MACHINE = "(beaglev-starlight-jh7100|visionfive|jh7110)"

wic/pinetabv.wks

@@ -0,0 +1,21 @@
+# short-description: Create a bootable SD card/EMMC image for Pine64 PineTabv board
+# long-description:
+# Create a bootable image that can be written onto a SD card using dd for use
+# with Pine64 PineTabv
+#
+# Factory u-boot expects the /boot partition to be at position 3, so create 2 empty partitions at the start of the Image
+# PineTabV is not setup to load uboot from a SD Card, only SPI or UART, so we skip installing spl/u-boot
+#
+# The disk layout used is:
+#  --------------- --------------
+# |    boot      |    rootfs    |
+#  --------------- --------------
+# ^              ^
+# |              |
+# 0              300MiB + rootfs + IMAGE_EXTRA_SPACE
+#
+part emtpy1 --source empty --ondisk mmcblk --size="2048k" --label emtpy1
+part empty2 --source empty --ondisk mmcblk --size="2048k" --label empty2
+part /boot --source bootimg-partition --ondisk mmcblk --fstype=vfat --label boot --use-uuid --part-name boot --part-type EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 --align 4096 --size 292M
+part /root --source rootfs --ondisk mmcblk --fstype=ext4 --part-name root --part-type 0FC63DAF-8483-4772-8E79-3D69D8477DE4 --active --label root --align 4096
+bootloader  --ptable gpt