mirror of
https://github.com/Fishwaldo/meta-riscv.git
synced 2025-03-15 11:31:43 +00:00
docs/BeagleV.md: Update the BeagleV documentation
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This commit is contained in:
Alistair Francis
Khem Raj
parent
1f6605cb48
commit
f2a2d890ee
1 changed files with 27 additions and 336 deletions
363
docs/BeagleV.md
363
docs/BeagleV.md
|
|
@ -26,362 +26,53 @@ Build results
|
|||
- starfive_vic7100_beagle_v.dtb
|
||||
- u-boot.bin
|
||||
|
||||
Flashing
|
||||
========
|
||||
Flashing Linux
|
||||
==============
|
||||
|
||||
* Flash `core-image-minimal-beaglev-starlight-jh7100.wic.gz` onto uSD card:
|
||||
Flash `core-image-minimal-beaglev-starlight-jh7100.wic.gz` onto uSD card:
|
||||
|
||||
```
|
||||
$ sudo bmaptool copy --bmap core-image-minimal-beaglev-starlight-jh7100.wic.bmap core-image-minimal-beaglev-starlight-jh7100.wic.gz /dev/sdx
|
||||
```
|
||||
|
||||
* Flash U-Boot:
|
||||
Flashing U-Boot
|
||||
===============
|
||||
|
||||
Generally you shouldn't need to change u-boot or OpenSBI, but if you do need
|
||||
to you can update it with the Xmodem protocol. Below are steps to do this with
|
||||
Linux and screen.
|
||||
|
||||
First prepare the image with
|
||||
|
||||
```
|
||||
$ perl -e 'print pack("l", (stat @ARGV[0])[7])' fw_payload.bin > fw_payload.bin.out
|
||||
$ cat fw_payload.bin >> fw_payload.bin.out
|
||||
```
|
||||
|
||||
* Interrupt the boot process and send the `fw_payload.bin.out`. Details can be
|
||||
found [here](https://github.com/tpetazzoni/buildroot/blob/beaglev/board/beaglev/readme.txt#L60)
|
||||
and install the `lrzsz` package.
|
||||
|
||||
Then connect to the UART console
|
||||
|
||||
```shell
|
||||
screen /dev/ttyUSB0 115200
|
||||
```
|
||||
|
||||
Press the `RST` button on the board and then press a key to interrupt the
|
||||
boot process. You should then see
|
||||
|
||||
```text
|
||||
*************** FLASH PROGRAMMING *****************
|
||||
```
|
||||
|
||||
Testing
|
||||
=======
|
||||
|
||||
* The root partition is sometimes not found on time - `rootdelay=3` parameter
|
||||
was added to the cmdline
|
||||
|
||||
* The booting fails in following way currently:
|
||||
After that press `0` to update the bootloader. Then press `Ctrl` + `A` then `:`.
|
||||
In screen run:
|
||||
|
||||
```shell
|
||||
exec !! sx fw_payload.bin.out
|
||||
```
|
||||
on
|
||||
bootloader version:210209-4547a8d
|
||||
ddr 0x00000000, 1M test
|
||||
ddr 0x00100000, 2M test
|
||||
DDR clk 2133M,Version: 210302-5aea32f
|
||||
0 crc flash: e1d5ffc3, crc ddr: e1d5ffc3
|
||||
crc check PASSED
|
||||
You can now watch the bootloader update. After it is complete you can reboot the board and watch it boot.
|
||||
|
||||
bootloader.
|
||||
|
||||
OpenSBI v0.9
|
||||
____ _____ ____ _____
|
||||
/ __ \ / ____| _ \_ _|
|
||||
| | | |_ __ ___ _ __ | (___ | |_) || |
|
||||
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
|
||||
| |__| | |_) | __/ | | |____) | |_) || |_
|
||||
\____/| .__/ \___|_| |_|_____/|____/_____|
|
||||
| |
|
||||
|_|
|
||||
|
||||
Platform Name : StarFive VIC7100
|
||||
Platform Features : timer,mfdeleg
|
||||
Platform HART Count : 2
|
||||
Firmware Base : 0x80000000
|
||||
Firmware Size : 92 KB
|
||||
Runtime SBI Version : 0.3
|
||||
|
||||
Domain0 Name : root
|
||||
Domain0 Boot HART : 1
|
||||
Domain0 HARTs : 0*,1*
|
||||
Domain0 Region00 : 0x0000000080000000-0x000000008001ffff ()
|
||||
Domain0 Region01 : 0x0000000000000000-0x0000007fffffffff (R,W,X)
|
||||
Domain0 Next Address : 0x0000000080200000
|
||||
Domain0 Next Arg1 : 0x0000000088000000
|
||||
Domain0 Next Mode : S-mode
|
||||
Domain0 SysReset : yes
|
||||
|
||||
Boot HART ID : 1
|
||||
Boot HART Domain : root
|
||||
Boot HART ISA : rv64imafdcsux
|
||||
Boot HART Features : scounteren,mcounteren
|
||||
Boot HART PMP Count : 16
|
||||
Boot HART PMP Granularity : 4096
|
||||
Boot HART PMP Address Bits: 36
|
||||
Boot HART MHPM Count : 0
|
||||
Boot HART MHPM Count : 0
|
||||
Boot HART MIDELEG : 0x0000000000000222
|
||||
Boot HART MEDELEG : 0x000000000000b109
|
||||
|
||||
|
||||
U-Boot 2021.04 (Apr 27 2021 - 19:25:33 +0000)
|
||||
|
||||
CPU: rv64imafdc
|
||||
DRAM: 8 GiB
|
||||
MMC: sdio0@10000000: 0, sdio1@10010000: 1
|
||||
Net: dwmac.10020000
|
||||
Autoboot in 2 seconds
|
||||
MMC CD is 0x0, force to True.
|
||||
MMC CD is 0x0, force to True.
|
||||
switch to partitions #0, OK
|
||||
mmc0 is current device
|
||||
Scanning mmc 0:1...
|
||||
Found /boot/extlinux/extlinux.conf
|
||||
Retrieving file: /boot/extlinux/extlinux.conf
|
||||
269 bytes read in 11 ms (23.4 KiB/s)
|
||||
1: Poky (Yocto Project Reference Distro)
|
||||
Retrieving file: /boot/extlinux/../../Image
|
||||
13402624 bytes read in 2811 ms (4.5 MiB/s)
|
||||
append: root=/dev/mmcblk0p2 earlyprintk rootwait rootdelay=3 panic=30 console=ttyS0,115200
|
||||
Retrieving file: /boot/extlinux/../../starfive_vic7100_beagle_v.dtb
|
||||
17419 bytes read in 15 ms (1.1 MiB/s)
|
||||
Moving Image from 0x84000000 to 0x80200000, end=80f1b000
|
||||
## Flattened Device Tree blob at 90000000
|
||||
Booting using the fdt blob at 0x90000000
|
||||
Using Device Tree in place at 0000000090000000, end 000000009000740a
|
||||
|
||||
Starting kernel ...
|
||||
|
||||
[ 0.000000] Linux version 5.10.6-yocto-standard-starfive (oe-user@oe-host) (riscv64-poky-linux-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.36.1.20210209) #1 SMP Tue Apr 27 18:28:08 UTC 2021
|
||||
[ 0.000000] OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
|
||||
[ 0.000000] efi: UEFI not found.
|
||||
[ 0.000000] Initial ramdisk at: 0x(____ptrval____) (99614720 bytes)
|
||||
[ 0.000000] OF: reserved mem: node linux,cma compatible matching fail
|
||||
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000f9000000, size 16 MiB
|
||||
[ 0.000000] OF: reserved mem: initialized node framebuffer@f9000000, compatible id shared-dma-pool
|
||||
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000fb000000, size 32 MiB
|
||||
[ 0.000000] OF: reserved mem: initialized node framebuffer@fb000000, compatible id shared-dma-pool
|
||||
[ 0.000000] Zone ranges:
|
||||
[ 0.000000] DMA32 [mem 0x0000000080200000-0x00000000ffffffff]
|
||||
[ 0.000000] Normal [mem 0x0000000100000000-0x000000027fffffff]
|
||||
[ 0.000000] Movable zone start for each node
|
||||
[ 0.000000] Early memory node ranges
|
||||
[ 0.000000] node 0: [mem 0x0000000080200000-0x00000000f8ffffff]
|
||||
[ 0.000000] node 0: [mem 0x00000000fa000000-0x00000000faffffff]
|
||||
[ 0.000000] node 0: [mem 0x00000000fd000000-0x000000027fffffff]
|
||||
[ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x000000027fffffff]
|
||||
[ 0.000000] software IO TLB: mapped [mem 0x00000000c5000000-0x00000000c9000000] (64MB)
|
||||
[ 0.000000] SBI specification v0.3 detected
|
||||
[ 0.000000] SBI implementation ID=0x1 Version=0x9
|
||||
[ 0.000000] SBI v0.2 TIME extension detected
|
||||
[ 0.000000] SBI v0.2 IPI extension detected
|
||||
[ 0.000000] SBI v0.2 RFENCE extension detected
|
||||
[ 0.000000] SBI v0.2 HSM extension detected
|
||||
[ 0.000000] riscv: ISA extensions acdfim
|
||||
[ 0.000000] riscv: ELF capabilities acdfim
|
||||
[ 0.000000] percpu: Embedded 17 pages/cpu s30952 r8192 d30488 u69632
|
||||
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2055687
|
||||
[ 0.000000] Kernel command line: root=/dev/mmcblk0p2 earlyprintk rootwait rootdelay=3 panic=30 console=ttyS0,115200
|
||||
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
|
||||
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
|
||||
[ 0.000000] Sorting __ex_table...
|
||||
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
|
||||
[ 0.000000] Memory: 7312644K/8337408K available (4485K kernel code, 4441K rwdata, 2048K rodata, 222K init, 327K bss, 1024764K reserved, 0K cma-reserved)
|
||||
[ 0.000000] Virtual kernel memory layout:
|
||||
[ 0.000000] fixmap : 0xffffffcefee00000 - 0xffffffceff000000 (2048 kB)
|
||||
[ 0.000000] pci io : 0xffffffceff000000 - 0xffffffcf00000000 ( 16 MB)
|
||||
[ 0.000000] vmemmap : 0xffffffcf00000000 - 0xffffffcfffffffff (4095 MB)
|
||||
[ 0.000000] vmalloc : 0xffffffd000000000 - 0xffffffdfffffffff (65535 MB)
|
||||
[ 0.000000] lowmem : 0xffffffe000000000 - 0xffffffe1ffe00000 (8190 MB)
|
||||
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
|
||||
[ 0.000000] rcu: Hierarchical RCU implementation.
|
||||
[ 0.000000] rcu: RCU debug extended QS entry/exit.
|
||||
[ 0.000000] Tracing variant of Tasks RCU enabled.
|
||||
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
|
||||
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
|
||||
[ 0.000000] riscv-intc: 64 local interrupts mapped
|
||||
[ 0.000000] plic: disable L2 cache irq 128 in plic
|
||||
[ 0.000000] plic: disable L2 cache irq 131 in plic
|
||||
[ 0.000000] plic: disable L2 cache irq 129 in plic
|
||||
[ 0.000000] plic: disable L2 cache irq 130 in plic
|
||||
[ 0.000000] plic: disable L2 cache irq 128 in plic
|
||||
[ 0.000000] plic: disable L2 cache irq 131 in plic
|
||||
[ 0.000000] plic: disable L2 cache irq 129 in plic
|
||||
[ 0.000000] plic: disable L2 cache irq 130 in plic
|
||||
[ 0.000000] plic: plic@c000000: mapped 127 interrupts with 2 handlers for 4 contexts.
|
||||
[ 0.000000] random: get_random_bytes called from start_kernel+0x582/0x700 with crng_init=0
|
||||
[ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [1]
|
||||
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x171024e6b, max_idle_ns: 440795202301 ns
|
||||
[ 0.000008] sched_clock: 64 bits at 6MHz, resolution 160ns, wraps every 4398046511040ns
|
||||
[ 0.000298] Console: colour dummy device 80x25
|
||||
[ 0.000399] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
|
||||
[ 0.000429] pid_max: default: 32768 minimum: 301
|
||||
[ 0.001214] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
|
||||
[ 0.001794] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
|
||||
[ 0.006056] rcu: Hierarchical SRCU implementation.
|
||||
[ 0.006718] EFI services will not be available.
|
||||
[ 0.007648] smp: Bringing up secondary CPUs ...
|
||||
[ 0.009501] smp: Brought up 1 node, 2 CPUs
|
||||
[ 0.013022] devtmpfs: initialized
|
||||
[ 0.019471] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
|
||||
[ 0.019525] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
|
||||
[ 0.020931] NET: Registered protocol family 16
|
||||
[ 0.035960] OF: /soc/i2c@118b0000: could not find phandle
|
||||
[ 0.036107] OF: /soc/i2c@118c0000: could not find phandle
|
||||
[ 0.036206] OF: /soc/i2c@12450000: could not find phandle
|
||||
[ 0.039497] OF: /soc/i2c@118b0000: could not find phandle
|
||||
[ 0.039770] OF: /soc/i2c@118c0000: could not find phandle
|
||||
[ 0.040034] OF: /soc/i2c@12450000: could not find phandle
|
||||
[ 0.052227] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
|
||||
[ 0.055991] starfive_gpio 11910000.gpio: SiFive GPIO chip registered 64 GPIOs
|
||||
[ 0.056968] SCSI subsystem initialized
|
||||
[ 0.057719] OF: /soc/i2c@118b0000: could not find phandle
|
||||
[ 0.057757] i2c_designware 118b0000.i2c: Using 'clocks' : 49500000 / 1000
|
||||
[ 0.057796] i2c_designware 118b0000.i2c: Using 'clocks' : 49500000 / 1000
|
||||
[ 0.057814] i2c_designware 118b0000.i2c: Using 'clocks' : 49500000 / 1000
|
||||
[ 0.058000] i2c_designware 118b0000.i2c: running with gpio recovery mode! scl,sda
|
||||
[ 0.058958] OF: /soc/i2c@118c0000: could not find phandle
|
||||
[ 0.058998] i2c_designware 118c0000.i2c: Using 'clocks' : 49500000 / 1000
|
||||
[ 0.059034] i2c_designware 118c0000.i2c: Using 'clocks' : 49500000 / 1000
|
||||
[ 0.059051] i2c_designware 118c0000.i2c: Using 'clocks' : 49500000 / 1000
|
||||
[ 0.059268] i2c_designware 118c0000.i2c: running with gpio recovery mode! scl,sda
|
||||
[ 0.059885] OF: /soc/i2c@12450000: could not find phandle
|
||||
[ 0.059922] i2c_designware 12450000.i2c: Using 'clocks' : 50000000 / 1000
|
||||
[ 0.059959] i2c_designware 12450000.i2c: Using 'clocks' : 50000000 / 1000
|
||||
[ 0.059976] i2c_designware 12450000.i2c: Using 'clocks' : 50000000 / 1000
|
||||
[ 0.060149] i2c_designware 12450000.i2c: running with gpio recovery mode! scl,sda
|
||||
[ 0.062181] clocksource: Switched to clocksource riscv_clocksource
|
||||
[ 0.083032] NET: Registered protocol family 2
|
||||
[ 0.084254] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
|
||||
[ 0.085093] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
|
||||
[ 0.087789] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
|
||||
[ 0.097890] TCP: Hash tables configured (established 65536 bind 65536)
|
||||
[ 0.098717] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
|
||||
[ 0.100613] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
|
||||
[ 0.102895] NET: Registered protocol family 1
|
||||
[ 0.104820] RPC: Registered named UNIX socket transport module.
|
||||
[ 0.104849] RPC: Registered udp transport module.
|
||||
[ 0.104859] RPC: Registered tcp transport module.
|
||||
[ 0.104868] RPC: Registered tcp NFSv4.1 backchannel transport module.
|
||||
[ 0.105252] Unpacking initramfs...
|
||||
[ 0.105294] Initramfs unpacking failed: invalid magic at start of compressed archive
|
||||
[ 0.544718] Freeing initrd memory: 97280K
|
||||
[ 0.546542] workingset: timestamp_bits=62 max_order=21 bucket_order=0
|
||||
[ 0.559388] NFS: Registering the id_resolver key type
|
||||
[ 0.559453] Key type id_resolver registered
|
||||
[ 0.559465] Key type id_legacy registered
|
||||
[ 0.559672] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
|
||||
[ 0.559743] ntfs: driver 2.1.32 [Flags: R/W].
|
||||
[ 0.561207] NET: Registered protocol family 38
|
||||
[ 0.561318] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
|
||||
[ 0.561337] io scheduler mq-deadline registered
|
||||
[ 0.561348] io scheduler kyber registered
|
||||
[ 0.573734] dw_axi_dmac_platform 100b0000.sgdma2p: DesignWare AXI DMA Controller, 4 channels
|
||||
[ 0.575761] dw_axi_dmac_platform 10500000.sgdma1p: DesignWare AXI DMA Controller, 16 channels
|
||||
[ 0.576606] L2CACHE: No. of Banks in the cache: 2
|
||||
[ 0.576630] L2CACHE: No. of ways per bank: 16
|
||||
[ 0.576640] L2CACHE: Sets per bank: 1024
|
||||
[ 0.576648] L2CACHE: Bytes per cache block: 64
|
||||
[ 0.576657] L2CACHE: Index of the largest way enabled: 0
|
||||
[ 0.712085] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
|
||||
[ 0.715331] printk: console [ttyS0] disabled
|
||||
[ 0.715470] 12440000.serial: ttyS0 at MMIO 0x12440000 (irq = 6, base_baud = 6250000) is a 16550A
|
||||
[ 1.533275] printk: console [ttyS0] enabled
|
||||
[ 1.539845] dw-apb-uart 11870000.hs_serial: detected caps 00000000 should be 00000100
|
||||
[ 1.547802] 11870000.hs_serial: ttyS1 at MMIO 0x11870000 (irq = 7, base_baud = 4640625) is a 16550
|
||||
[ 1.560581] vic-rng 118d0000.trng: Initialized
|
||||
[ 1.589110] loop: module loaded
|
||||
[ 1.593919] libphy: Fixed MDIO Bus: probed
|
||||
[ 1.599333] stmmaceth 10020000.gmac: IRQ eth_lpi not found
|
||||
[ 1.605112] stmmaceth 10020000.gmac: force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
|
||||
[ 1.614180] stmmaceth 10020000.gmac: PTP uses main clock
|
||||
[ 1.619492] stmmaceth 10020000.gmac: no reset control found
|
||||
[ 1.625734] stmmaceth 10020000.gmac: User ID: 0x59, Synopsys ID: 0x37
|
||||
[ 1.632262] stmmaceth 10020000.gmac: DWMAC1000
|
||||
[ 1.636796] stmmaceth 10020000.gmac: DMA HW capability register supported
|
||||
[ 1.643603] stmmaceth 10020000.gmac: RX Checksum Offload Engine supported
|
||||
[ 1.650371] stmmaceth 10020000.gmac: COE Type 2
|
||||
[ 1.654919] stmmaceth 10020000.gmac: Wake-Up On Lan supported
|
||||
[ 1.660649] stmmaceth 10020000.gmac: Enhanced/Alternate descriptors
|
||||
[ 1.666938] stmmaceth 10020000.gmac: Enabled extended descriptors
|
||||
[ 1.673044] stmmaceth 10020000.gmac: Ring mode enabled
|
||||
[ 1.678171] stmmaceth 10020000.gmac: Enable RX Mitigation via HW Watchdog Timer
|
||||
[ 1.685499] stmmaceth 10020000.gmac: device MAC address 2c:f7:f1:1b:e3:77
|
||||
[ 1.702599] libphy: stmmac: probed
|
||||
[ 1.706035] mdio_bus stmmac-0:07: attached PHY driver [unbound] (mii_bus:phy_addr=stmmac-0:07, irq=POLL)
|
||||
[ 1.718565] sdhci: Secure Digital Host Controller Interface driver
|
||||
[ 1.724869] sdhci: Copyright(c) Pierre Ossman
|
||||
[ 1.729292] Synopsys Designware Multimedia Card Interface Driver
|
||||
[ 1.735703] sdhci-pltfm: SDHCI platform and OF driver helper
|
||||
[ 1.736268] dw_mmc 10000000.sdio0: IDMAC supports 32-bit address mode.
|
||||
[ 1.743263] NET: Registered protocol family 10
|
||||
[ 1.748083] dw_mmc 10000000.sdio0: Using internal DMA controller.
|
||||
[ 1.758441] dw_mmc 10000000.sdio0: Version ID is 290a
|
||||
[ 1.763248] Segment Routing with IPv6
|
||||
[ 1.763673] dw_mmc 10000000.sdio0: DW MMC controller at irq 30,32 bit host data width,32 deep fifo
|
||||
[ 1.767286] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
|
||||
[ 1.776305] mmc_host mmc0: card is polling.
|
||||
[ 1.783228] NET: Registered protocol family 17
|
||||
[ 1.787025] dw_mmc 10010000.sdio1: IDMAC supports 32-bit address mode.
|
||||
[ 1.791007] 9pnet: Installing 9P2000 support
|
||||
[ 1.797248] dw_mmc 10010000.sdio1: Using internal DMA controller.
|
||||
[ 1.801625] Key type dns_resolver registered
|
||||
[ 1.807623] dw_mmc 10010000.sdio1: Version ID is 290a
|
||||
[ 1.812283] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
|
||||
[ 1.817013] dw_mmc 10010000.sdio1: DW MMC controller at irq 31,32 bit host data width,32 deep fifo
|
||||
[ 1.835260] mmc_host mmc1: card is non-removable.
|
||||
[ 1.840084] dw-apb-uart 12440000.serial: forbid DMA for kernel console
|
||||
[ 1.846820] Waiting 3 sec before mounting root device...
|
||||
[ 2.002239] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 400000Hz, actual 400000HZ div = 125)
|
||||
[ 2.052209] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 400000Hz, actual 400000HZ div = 125)
|
||||
[ 2.254564] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 10000000Hz, actual 10000000HZ div = 5)
|
||||
[ 2.264633] mmc0: new high speed SDHC card at address 0007
|
||||
[ 2.273838] mmcblk0: mmc0:0007 SL16G 14.5 GiB
|
||||
[ 2.300377] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
|
||||
[ 2.306427] GPT:Primary header thinks Alt. header is not at the end of the disk.
|
||||
[ 2.313893] GPT:3004859 != 30318591
|
||||
[ 2.317375] GPT:Alternate GPT header not at the end of the disk.
|
||||
[ 2.323405] GPT:3004859 != 30318591
|
||||
[ 2.326886] GPT: Use GNU Parted to correct GPT errors.
|
||||
[ 2.332167] mmcblk0: p1 p2
|
||||
[ 2.337899] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
|
||||
[ 2.344796] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
|
||||
[ 2.352584] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
|
||||
[ 2.360859] mmc1: queuing unknown CIS tuple 0x81 (9 bytes)
|
||||
[ 2.397586] random: fast init done
|
||||
[ 2.440343] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 10000000Hz, actual 10000000HZ div = 5)
|
||||
[ 2.455028] mmc1: new high speed SDIO card at address 0001
|
||||
[ 4.914753] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
|
||||
[ 4.923024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
|
||||
[ 4.932239] devtmpfs: mounted
|
||||
[ 4.936174] Freeing unused kernel memory: 220K
|
||||
[ 4.941000] Run /sbin/init as init process
|
||||
INIT: version 2.99 booting
|
||||
Starting udev
|
||||
[ 5.953613] udevd[82]: starting version 3.2.10
|
||||
[ 5.961108] random: udevd: uninitialized urandom read (16 bytes read)
|
||||
[ 5.971850] random: udevd: uninitialized urandom read (16 bytes read)
|
||||
[ 5.978524] random: udevd: uninitialized urandom read (16 bytes read)
|
||||
[ 6.059771] udevd[83]: starting eudev-3.2.10
|
||||
[ 6.576695] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
|
||||
hwclock: can't open '/dev/misc/rtc': No such file or directory
|
||||
Fri Mar 9 12:34:56 UTC 2018
|
||||
hwclock: can't open '/dev/misc/rtc': No such file or directory
|
||||
[ 11.179204] urandom_read: 2 callbacks suppressed
|
||||
[ 11.179220] random: dd: uninitialized urandom read (512 bytes read)
|
||||
[ 11.234746] init[1]: unhandled signal 11 code 0x1 at 0x0000000000000030 in libc-2.33.so[3ff1bcd000+fd000]
|
||||
[ 11.244383] CPU: 1 PID: 1 Comm: init Not tainted 5.10.6-yocto-standard-starfive #1
|
||||
[ 11.251930] epc: 0000003ff1c4956e ra : 0000003ff1c4affa sp : 0000003ffff313b0
|
||||
[ 11.259067] gp : 0000002addd82800 tp : 0000003ff1cd9320 t0 : 0000000000000001
|
||||
[ 11.266313] t1 : 000000000000016d t2 : 0000000000000000 s0 : 0000003ff1cd12d0
|
||||
[ 11.273563] s1 : 0000002addd83690 a0 : 0000002addd83894 a1 : 0000000000001ffc
|
||||
[ 11.280761] a2 : 0000003ff1cbc8d0 a3 : 0000000000000000 a4 : 0000000000000000
|
||||
[ 11.287980] a5 : 0000003ffff314cf a6 : 0000003ff1cccc48 a7 : 0000000000000190
|
||||
[ 11.295199] s2 : 0000000000001ffc s3 : 0000000000000001 s4 : 0000003ff1ccd124
|
||||
[ 11.302415] s5 : 0000002addd7f410 s6 : 0000003ffff31608 s7 : 0000000000000002
|
||||
[ 11.309663] s8 : 0000000000000010 s9 : 0000000000000002 s10: 0000002addd83894
|
||||
[ 11.316923] s11: 0000002addd7fb30 t3 : ffffffbefedb4876 t4 : 0000000000000001
|
||||
[ 11.324155] t5 : 0000000000000051 t6 : ffffffffffffff24
|
||||
[ 11.329453] status: 0000000200004020 badaddr: 0000000000000030 cause: 000000000000000d
|
||||
[ 11.337445] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
|
||||
[ 11.345091] CPU: 1 PID: 1 Comm: init Not tainted 5.10.6-yocto-standard-starfive #1
|
||||
[ 11.352633] Call Trace:
|
||||
[ 11.355092] [<ffffffe000202332>] walk_stackframe+0x0/0x9c
|
||||
[ 11.360480] [<ffffffe000656ac8>] show_stack+0x34/0x3e
|
||||
[ 11.365524] [<ffffffe00065954e>] dump_stack+0x70/0x8e
|
||||
[ 11.370559] [<ffffffe000656d1c>] panic+0xfa/0x2b0
|
||||
[ 11.375257] [<ffffffe0002095f2>] do_exit+0x12c/0x62c
|
||||
[ 11.380206] [<ffffffe00020a54a>] do_group_exit+0x3a/0x7c
|
||||
[ 11.385508] [<ffffffe0002120f6>] get_signal+0x19c/0x4a8
|
||||
[ 11.390718] [<ffffffe000201bc4>] do_notify_resume+0x3e/0x2e0
|
||||
[ 11.396361] [<ffffffe000201142>] ret_from_exception+0x0/0xc
|
||||
[ 11.401914] SMP: stopping secondary CPUs
|
||||
[ 11.405854] Rebooting in 30 seconds..
|
||||
```
|
||||
More details can be found [here](https://github.com/tpetazzoni/buildroot/blob/beaglev/board/beaglev/readme.txt#L60).
|
||||
|
||||
Resources
|
||||
=========
|
||||
|
|
|
|||
Loading…
Add table
Reference in a new issue