Update config for Smart LED Retrofit Kit ZE27EU

config/domitech/ze27eu.xml

@@ -1,33 +1,33 @@
-<!-- Domitech Smart LED Retrofit Kit ZE27EU --><Product Revision="2" xmlns="https://github.com/OpenZWave/open-zwave">
+<!-- Domitech Smart LED Retrofit Kit ZE27EU --><Product Revision="3" xmlns="https://github.com/OpenZWave/open-zwave">
   <MetaData>
     <MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/020E:3134:4C42</MetaDataItem>
     <MetaDataItem name="ProductPic">images/domitech/ze27eu.png</MetaDataItem>
-    <MetaDataItem id="3134" name="ZWProductPage" type="4C42">https://products.z-wavealliance.org/products/1530/</MetaDataItem>
+    <MetaDataItem id="3134" name="ZWProductPage" type="4C42">https://products.z-wavealliance.org/products/1914/</MetaDataItem>
     <MetaDataItem name="ExclusionDescription">1. Turn off power to the light bulb socket
 2. Follow the network controller instruction to place your network controller into exclusion mode to remove the dt light bulb from the network.
-3. After being prompted by the network controller, turn On power to the light bulb.  If successful, the LED light bulb will flash twice to indicate successful inclusion.
+3. After being prompted by the network controller, turn On power to the light bulb.  If successful, the LED light bulb will flash twice to indicate successful exclusion.
 
 </MetaDataItem>
-    <MetaDataItem id="3134" name="FrequencyName" type="4C42">CEPT (Europe)</MetaDataItem>
+    <MetaDataItem id="3134" name="FrequencyName" type="4C42">CEPT (Europe) / U.S. / Canada / Mexico</MetaDataItem>
     <MetaDataItem name="ResetDescription">You may manually reset the light bulb as follows:
 1.  Flick the wall switch “OFF-ON” 4 times within 4 seconds. 
 2. The dt Smart Bulb will flash twice after Reset is successful.  
 
 Use this procedure only in the event that the network primary controller is lost or otherwise inoperable.</MetaDataItem>
-    <MetaDataItem id="3134" name="Identifier" type="4C42">ZE27EU</MetaDataItem>
+    <MetaDataItem id="3134" name="Identifier" type="4C42">ZE26i</MetaDataItem>
     <MetaDataItem name="Description">Smart LED light bulb with Z-Wave radio.
 - Control lights remotely and save energy
 - Compatible with smart home systems supporting Z-Wave
-- 60 Watt equivalent light (806 lumens)
+- 60 Watt equivalent light (750 lumens)
 - Consumes only 9 watts of power
-- 2700K Day light with frosted glass 
+- 2700K soft light with frosted glass 
 - Instant ON and fully dimmable
 - Functions as a Z-Wave signal repeater
 - Very simple to include in your network
 - Z-Wave Plus certified 
 </MetaDataItem>
     <MetaDataItem name="Name">Smart LED Light Bulb</MetaDataItem>
-    <MetaDataItem name="ProductManual">https://Products.Z-WaveAlliance.org/ProductManual/File?folder=&amp;filename=Manuals/1530/Instructions_ZE27EU_10222015 small.pdf</MetaDataItem>
+    <MetaDataItem name="ProductManual">https://Products.Z-WaveAlliance.org/ProductManual/File?folder=&amp;filename=Manuals/1914/ZE26I Manual.pdf</MetaDataItem>
     <MetaDataItem name="InclusionDescription">1. Turn Off power to the light bulb socket
 2. Screw in the light bulb
 3. Place your network controller into inclusion mode by following the controller manufacturer's instructions
@@ -38,6 +38,7 @@ Note: If Inclusion still fails after the 2nd attempt, you need to first RESET th
 </MetaDataItem>
     <ChangeLog>
       <Entry author="Justin Hammond - Justin@dynam.ac" date="23 May 2019" revision="2">Initial Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1530/xml</Entry>
+      <Entry author="Justin Hammond - Justin@dynam.ac" date="24 May 2019" revision="3">Updated Metadata Import from Z-Wave Alliance Database - https://products.z-wavealliance.org/products/1914/xml</Entry>
     </ChangeLog>
   </MetaData>
   <!-- Configuration -->